I've been searching two months looking for firmware for my device and haven't found anything that works like the original firmware did.
My tablet is a Trio Stealth G4 10.1 8gb (MST-1041). It got messed up after I tried installing cwm which froze and when my tablet rebooted it just said installation error over and over again.
Things that I could find out about this tablet ...
Allwinner A31Series with AP6210, was running 4.4.2 (KOT49H), exdroid 4.4.2_r2-a31-v4.6
This is where it gets hard. The board says INET-Q101-REV02 Zeng-gc 2014-03-08, and on the underside iQ101-BT CT 8010/2.
Does anyone know of a firmware for this device or is compatible with this device? Some other questions, what's the difference between Q101 and Q102?
Related
I tried to install lolipop by converting my moto g frawg wireless cdma xt1031 into gpe. Well that's when the fun started somehow i managed to flash a non cdma (duel sim) rom onto my device completely ****ing it up. here were it gets interesting though. in fast boot my device is registering the eMMC as 8gb Samsung rv=06 pv=02 ty=17 and DRAM as 1024kb Samsung S$ SDRAM DIE=40b (its a moto g and should be saying .. as it dose on my replacement of the exact same phone eMMC *GB Toshiba RV=06 PV=51 TY=17 and DRAM 1024 Elpida S4 SDRAM DIE=4gb) on top of this the costume recovery has graphical refresh lines going horizontally down the screen like some kind of old vhs tape and it doesn't side load either. on top of all this the switch console is gone. I've tried Several dozen unbrick methods nothings even come close to working. oh and i think its still gpe (woohoo) <- sarcasm . please god help.
Progress report.
Attempting to install a modified version of cynogen mod 12 designed for the xt1031
Hi there,
I think flashing stock firmware will solve your problem. See this thread: [ROM][4.4.4][STOCK][FLASHABLE ZIP] Stock Motorola KitKat ROM Collection
And this one: [GUIDE] Moto G - Restore stock firmware
For more answetrs from the experts/owners please ask directly here:
Moto G Q&A, Help & Troubleshooting
Good luck
Thank you for you're reply I've come up with a solution I believe has worked, After trying you're method a week ago and being wholly unable to side load or flash anything (as stated in the main post) I purchased an external micro sd card adapter and backed up my new phone in clockwork mod and used that restoration data to revive my old phone It seems to have worked to a degree but i wont know until i get the phone re flashed at my carrier. The phone is more or less a clone of my new phone at this point. however the emmc and dram are still wacky the recovery still will not side load and the whole v.h.s thing still going on but hell it seems to have worked.
Glad to hear that.
Thread closed
Hello guys,
I’ve got a problem. I’ve bought a Tablet with android of a company called „CAPTIVA“
Now I’ve tried to flash another Firmware of a device called TitanX2. So my problem is that the tablet works but only the sound of screenshots and the lockscreen.
So now my question is:
Has anybody here this Tablet to make a backup of this device or does anybody know where to download the original firmware?
BTW I formatted the device completely and there is no chance I think to restore it without any matching scatter and system files.
Thank you in advance
I’ll post the link to the specs of the device later
Bye
Hi guys! I am new here, so sorry if this thread is misplaced.
I have an Insys VI4-903 tablet. Insys is a Portuguese brand, so it's unlikely that you'll find its products anywhere different than Portugal, Angola, and a few other Portuguese speaking countries.
A few weeks ago, after picking up the tablet after almost 2 years without using it, I started getting Google Play Store error 491 everytime I tried to download and install an app. Since I didn't know better, to solve the problem I first rooted the tablet, and then started messing with the tablet until I finally flashed a new recovery (TWRP) through Rashr app. You may ask me why, but honestly, I don't know why I did it. The tablet got hard bricked. Finally, I read about (re)installing the stock firmware. I tried to install some firmwares I found, but until now none of them worked.
I am here today to ask if anyone can help me find a firmware (or the stock firmware) for the tablet. I am using PhoenixSuit to install the firmwares, so I am looking for a .img file. The CPU is an Allwinner A33, and the motherboard reference is BM903_V1.0 2014-08-20. The build number of the tablet is astar_uarmmid. The version of the Android is 4.4.2 (KitKat).
Thanks in advance!
Hello Everyone!
So today something really interesting happened with me...... I'm feeling okay but i'm kinda nervous too.
I had rooted my phone earlier and flashed Lineage OS but i was encountering lots of problems so i tried to flash phone's firmware with odin.
My phone was Samsung Galaxy On7 Pro. I installed a firmware file and flashed it. But unfortunately, the firmware was of Samsung Galaxy On7 not Samsung Galaxy On7 Pro. When, i installed it, i encountered a DRK error! Then, it took me to Stock Recovery. From there, i wiped cache and internal storage and rebooted. It somehow worked very correctly. But now whenever i reboot my phone, i get Galaxy On7 logo not Galaxy On7 Pro. I don't know what happened but it's a MIRACLE of Android.........!!!!!!!
So, my queries are as follows:
Now, i'm stuck on Android Lollipop (5.1.1). There is a OTA update available within the system because it says its official now. What if i update? Will it even update? Or it will brick because phone model is different and firmware is diffrent?
Will it run smoothly in the situation where it is? (Note: I have not encountered any issues till now. Both Software and Hardware work well)
So, Miracles can happen in android world as happened with me.
Glad to hear you were able to unbrick your phone!
First a warning, I have no experience with your particular phone. But, I would think your update would go through. Usually the Pro and non-pro models are very similar and that is why your firmware worked. There might be some weird functionality in some areas like the camera or modems.
So, you can try the update. Worse case, you flash the On7 Pro firmware instead of the non-pro version again.
Well, the software updated and worked. No issues at all.
But i'm still confused how did it even work........
Anyway, i'm back to Marshmallow (6.0.1) again.
Everything works fine. I tested most things and all work correctly. I think Samsung just gave 8GB storage in non-pro version and 16GB in pro version and software is same xD
I also got new bootanimation and phone turn on sound from that
Moreover, i ordered a new Samsung M31 as i wanted more storage
But problems on older phone are also solved
Now, i will keep 2 phones
I'm really hoping someone here can help me with this. I was recently given an Insignia Tablet model NS-14T004.When I got it charged, and began looking at the apps, etc it was running, I started trying to update it, only to find out about it's history with Best Buy, being discontinued by Insignia, not supported for updates, etc. It currently has Android 4.2.2 OS, so is it possible for me to update it to run a more modern version, and if so, can I get some help with it, please? Thank you
The steps you've to do
Check tablet's bootloader is unlockable
If unlockable then find a Custom Recovery suitable to your tablet
If found then find a Custom ROM suitable to your tablet
If found
Unlock booloader
Flash Custom Recovery
Flash Custom ROM
Thanks, I'll start looking that stuff over now