Mt8163 Captiva Pad 10 2-in-1 won’t show anything after flashing rom - Android General

Hello guys,
I’ve got a problem. I’ve bought a Tablet with android of a company called „CAPTIVA“
Now I’ve tried to flash another Firmware of a device called TitanX2. So my problem is that the tablet works but only the sound of screenshots and the lockscreen.
So now my question is:
Has anybody here this Tablet to make a backup of this device or does anybody know where to download the original firmware?
BTW I formatted the device completely and there is no chance I think to restore it without any matching scatter and system files.
Thank you in advance
I’ll post the link to the specs of the device later
Bye

Related

[Q] Need help finding firmware

I've been searching two months looking for firmware for my device and haven't found anything that works like the original firmware did.
My tablet is a Trio Stealth G4 10.1 8gb (MST-1041). It got messed up after I tried installing cwm which froze and when my tablet rebooted it just said installation error over and over again.
Things that I could find out about this tablet ...
Allwinner A31Series with AP6210, was running 4.4.2 (KOT49H), exdroid 4.4.2_r2-a31-v4.6
This is where it gets hard. The board says INET-Q101-REV02 Zeng-gc 2014-03-08, and on the underside iQ101-BT CT 8010/2.
Does anyone know of a firmware for this device or is compatible with this device? Some other questions, what's the difference between Q101 and Q102?

URGENT! Need Help with my ZF3U

UPDATE:
I have now installed the manual update for Android 7.0 and this helped to resolve some of the issues:
-I can now make and receive calls fully with voice enabled
-Bootloader updated from 1.26 to 3.11
BUT:
-Fingerprint Recognition still not working
-Device serial number still shows as 111111111111111
-Device shows as encrypted- could this be the cause and how?
If anyone has any suggestions please assist.
MY ORIGINAL POST RE ISSUES:
Following release of Android 7 for ZF3U, I updated and then wanted to unlock the bootloader and carry out root. All went fine but now after unlocking the bootloader and root I have a major problem. My ZF3U does not show the correct device serial number in the initial setup wizard and in about phone section of settings. All I get is "111111111111111". Secondly, whilst all other functions are working fine, I can no longer hear the sound of any made or received phone calls.
I also tried to use the ASUS Flash Tool to reinstall the firmware but could not and at one point I saw a message stating that the device was being encrypted . I have no idea what implications this has but I my phone does not allow use of internal speakers or microphone for the other side to hear me. It appears that the serial number issue started with my use of the Asus Flash Tool. I am also not sure if this encryption issue caused the issue as it may have locked certain parts of the device.
Also, as a result I am unable to set the fingerprint recognition in initial setup or after setup. Pin code, pattern etc can be setup but not fingerprint security.
Tried to use TWRP to reinstall the firmware. All installs fine but the problem is still there. I pressed the decrypta button inside TWRP settings but still no fix. Also, did all the usual wipes etc.... still no fix. I don't know what to do. I now wish I had not played around with the phone and simply used it as it was. With the bootloader unlocked no Android 7 anymore until manual firmware becomes available. My device serial number still shows as "111111111111111" but when I launch the fastboot/recovery mode I do see the correct serial number but the device boots to UI with the incorrect serial number. My theory is that the Asus Flash Tool caused the problem but I am not sure how.
Also if anyone has the original factory boot.img and other relevant .img files for me to fix the bootloader in case this is the problem thatI would be very appreciated. Also, I have read that the .raw firmware files for this device could fix the problem but not sure and the files cannot be found anywhere online.
I also by removed the root and did a fresh install of the previous firmware Android 6.0 and the problems still exist. I am not sure if the downgrade from Android 7 could have caused these problems too but I am trying to pinpoint the problem somehow. So if anyone has a full manual .Raw or normal .zip version of the Android 7.0 firmware then please provide a download link. If all fails then I would have to see if I could get Asus to fix it for me.
All suggestions and workarounds desperately welcome. Thanks.
1. Try posting about your issues in Taiwanese Asus forums under this topic:
https://www.asus.com/zentalk/tw/thread-216020-4-2.html
Use Google Translator in order to navigate the Taiwenese forum. Post your message in English.
2. Try posting about your issues in XDA Asus Zenfone 3 forums (regular Zenfone 3, not Zenfone 3 ultra), because regular Zenfone 3 community is larger, however devices should be quite similar:
https://forum.xda-developers.com/zenfone-3
As always, keep Zenfone 3 ultra community informed with your future findings, so we all could learn something new and help each other.

Help! Insys vi4-903 tablet firmware

Hi guys! I am new here, so sorry if this thread is misplaced.
I have an Insys VI4-903 tablet. Insys is a Portuguese brand, so it's unlikely that you'll find its products anywhere different than Portugal, Angola, and a few other Portuguese speaking countries.
A few weeks ago, after picking up the tablet after almost 2 years without using it, I started getting Google Play Store error 491 everytime I tried to download and install an app. Since I didn't know better, to solve the problem I first rooted the tablet, and then started messing with the tablet until I finally flashed a new recovery (TWRP) through Rashr app. You may ask me why, but honestly, I don't know why I did it. The tablet got hard bricked. Finally, I read about (re)installing the stock firmware. I tried to install some firmwares I found, but until now none of them worked.
I am here today to ask if anyone can help me find a firmware (or the stock firmware) for the tablet. I am using PhoenixSuit to install the firmwares, so I am looking for a .img file. The CPU is an Allwinner A33, and the motherboard reference is BM903_V1.0 2014-08-20. The build number of the tablet is astar_uarmmid. The version of the Android is 4.4.2 (KitKat).
Thanks in advance!

Lenovo Legion Pro Global (Chinese)

Good Afternoon:
I a m not a newbie at this but I am not an expert either> I recently purchased this phone from a Chinese supplier. I received the phone and briefly checked it out. I then plugged it in to charge it. Somewhere in the process the ROM vanished.
I pled with the suppliers for about two weeks which resulted in them sending my two versions of the ROM. The one initially on the phone when I got it and allegedly the Global ROM. Here's my present issue. The phone is locked into fast boot and the bootloader shows locked. I tried the Levovo recovery tool and that proved useless. I then tried loading the ROM onto an OTG via a micro SD card. No Joy.
Any suggestions would be greatly appreciated. I do have SDK tools, but haven't used it in a while. My issue was trying to find the correct driver for Windows to get it to recognize the phone. Grrrrr. I am a victim of my own stupidity. Any suggestions would greatly help.
Thanks in advance;
Howard
[email protected] said:
Good Afternoon:
I a m not a newbie at this but I am not an expert either> I recently purchased this phone from a Chinese supplier. I received the phone and briefly checked it out. I then plugged it in to charge it. Somewhere in the process the ROM vanished.
I pled with the suppliers for about two weeks which resulted in them sending my two versions of the ROM. The one initially on the phone when I got it and allegedly the Global ROM. Here's my present issue. The phone is locked into fast boot and the bootloader shows locked. I tried the Levovo recovery tool and that proved useless. I then tried loading the ROM onto an OTG via a micro SD card. No Joy.
Any suggestions would be greatly appreciated. I do have SDK tools, but haven't used it in a while. My issue was trying to find the correct driver for Windows to get it to recognize the phone. Grrrrr. I am a victim of my own stupidity. Any suggestions would greatly help.
Thanks in advance;
Howard
Click to expand...
Click to collapse
This article may help.
How to Install Stock ROM on Lenovo Legion Pro – Firmware Flash file
Lenovo finally launched their latest gaming smartphone called Lenovo Legion Pro (Model L79031). It features packs with everything that a gaming smartphone
www.getdroidtips.com
Not sure about the retailer who sold you the device but from what you've shared it doesn't sound like they're open to replacing the phone. To a certain degree that's on you for not doing your homework prior to purchase. Have you called Levano's customer support? If you just bought it then the warranty should cover the issue. Good luck!

Samsung Galaxy S7 (G930F) - EFS recovery

Hello XDA-Members,
I hope to get help here with following issue:
G930F had G930FXXS7ETA8 (Android 8) installed.
I cloned another G930F using TWRP.
By accident I cloned EFS too !!! OMG!
Now SIM-Card is not recognized anymore.
Anything else is fine.
I don't have a backup of EFS for the target device.
But I do have screenshots of Settings>Software Info !
So I know the IME the device had before the accident.
Years before I managed to recover a EFS with a combination ROM.
I tried to flash but the bootloader isn't compatible (need version 7, combination ROM has version 5).
All other tutorials I found did not help me.
Does anybody know how to solve this?
Really hope so!
Kind Regards
Andreas
Hi Andreas,
try this if you haven't already? It helped me getting back my IMEI and working WLAN. Sadly my bluetooth connection is still not usable as i wrote here.
Lars
Hello again,
hainguyenthao fixed the issue for some money.​Communication with this XDA senior member was not the best and it took much time for him and me.
In the end he left me alone with a not-ready-to-use phone.
BUT after some unsuccessful attempts to flash the official ROM without issues,
I cloned an identical device in UNLOCKED state with TWRP and everything is fine now.
If you ever want to clone with TWRP ensure the following:
- phones MUST have identical hardware
- remove any PIN / pattern / password from source phone before backup (= UNLOCKED)
- double-check to NOT overwrite the EFS-partion at destination phone !!!
- Please note, that TWRP does NOT backup your internal SDCARD !
(/storage/emulated/0)
For sure it's always a good idea to have a full backup of your device !
Beside TWRP I have screenshots from all IME and software relevant settings.
Be happy!
Andreas

Categories

Resources