Database Info

[Q]Stuck in download mode

Please help me i have restarted my tab GT-N800) and the samsung sign kept rotaing.
I Factory restarted it but no good .
Then i put it in download mode and tried to flash it but it is stuck in SetupConnection
Now it is stuck in download mode when i click Power + Volume up button only the android sign comes the odin mode information does not come
Please Help me :crying:

What about this?
:good:
AthulVincent said:
Please help me i have restarted my tab GT-N800) and the samsung sign kept rotaing.
I Factory restarted it but no good .
Then i put it in download mode and tried to flash it but it is stuck in SetupConnection
Now it is stuck in download mode when i click Power + Volume up button only the android sign comes the odin mode information does not come
Please Help me :crying:
Click to expand...
Click to collapse
1. At the downloading screen, plug your phone into your computer
2. Run Odin (I used Odin3 v3.09)
3. Uncheck auto reboot and F. Reset Time
4. Select PIT and load a .pit file ( Search forum for right PIT file)
5. Click Start
It will fail and your Message box will look like this
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
6. Now uplug your phone from the computer and reboot.
The only explanation I can come up with is that the partition file info gets corrupted or lost and doing this either rewrites the partition info file or tells the system where to look for it. I could be wrong but it is the only thing that works for me.
Wish you luck! Peter :fingers-crossed:

This should be a sticky, thanks my tablet is working again. Thank you Tanker32
Sent from my SM-N900 using Tapatalk

SM-N915A , unable to boot, Odin failed, now bricked.

Hi All,
I was using the SM-N915A as normal...then i left it idle for a while and came back saw it kept resetting itself. I tried clear cache partition already didnt' work. It keeps looping on startup after the samsung logo. It got worst as time went on, it wont even load into recovery anymore, it just loads with the android icon saying it's updating then freezes and restarts....I read that I can manual recover using Odin. I used odin and a stock rom to fix it, but the rom failed now i am bricked. Please help.
Odin3 v3.10.7
Stock Rom: AP_N915AUCU1BOC6_CL4376893_QB4361884_REV00_user_low_ship_MULTI_CERT.tar
Log
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this point i am bricked..."the phone just says firmware upgrade encountered an issue please recover mode in Kies and try again" Kies/SS doesn't work, when i plug in this phone, it doesn't recognize it.
What can I do now?

pubtemp said:
Hi All,
I was using the SM-N915A as normal...then i left it idle for a while and came back saw it kept resetting itself. I tried clear cache partition already didnt' work. It keeps looping on startup after the samsung logo. It got worst as time went on, it wont even load into recovery anymore, it just loads with the android icon saying it's updating then freezes and restarts....I read that I can manual recover using Odin. I used odin and a stock rom to fix it, but the rom failed now i am bricked. Please help.
Odin3 v3.10.7
Stock Rom: AP_N915AUCU1BOC6_CL4376893_QB4361884_REV00_user_low_ship_MULTI_CERT.tar
Log
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this point i am bricked..."the phone just says firmware upgrade encountered an issue please recover mode in Kies and try again" Kies/SS doesn't work, when i plug in this phone, it doesn't recognize it.
What can I do now?
Click to expand...
Click to collapse
Get md5 tar file & make sure your in download mode connect phone to Odin and try again

pit file with Odin 3.07 0 3.09 single and tell me how it went
pubtemp said:
Hi All,
I was using the SM-N915A as normal...then i left it idle for a while and came back saw it kept resetting itself. I tried clear cache partition already didnt' work. It keeps looping on startup after the samsung logo. It got worst as time went on, it wont even load into recovery anymore, it just loads with the android icon saying it's updating then freezes and restarts....I read that I can manual recover using Odin. I used odin and a stock rom to fix it, but the rom failed now i am bricked. Please help.
Odin3 v3.10.7
Stock Rom: AP_N915AUCU1BOC6_CL4376893_QB4361884_REV00_user_low_ship_MULTI_CERT.tar
Log
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this point i am bricked..."the phone just says firmware upgrade encountered an issue please recover mode in Kies and try again" Kies/SS doesn't work, when i plug in this phone, it doesn't recognize it.
What can I do now?
Click to expand...
Click to collapse

ltindi32 said:
pit file with Odin 3.07 0 3.09 single and tell me how it went
Click to expand...
Click to collapse
Thanks, I managed to use the pit file and it got pass the brick page.
However, now the system goes into the Samsung Galaxy Note Edge loading screen and just stays there for a very long time and then restarts itself again....I pulled the battery out to manual shutdown (power button will not shut it down) and tried to go into recovery mode, it says loading recovery, but ends up restarting back to the Samsung loading screen indefinitely again. I would assume that's because the rom is dead at this point, and I would need to go to dl mode and flash a new stock rom back in ? What is my next step ?

pubtemp said:
Thanks, I managed to use the pit file and it got pass the brick page.
However, now the system goes into the Samsung Galaxy Note Edge loading screen and just stays there for a very long time and then restarts itself again....I pulled the battery out to manual shutdown (power button will not shut it down) and tried to go into recovery mode, it says loading recovery, but ends up restarting back to the Samsung loading screen indefinitely again. I would assume that's because the rom is dead at this point, and I would need to go to dl mode and flash a new stock rom back in ? What is my next step ?
Click to expand...
Click to collapse
I will upload the stock n915a cu2co2 5.1.1 for mega t pass the link to try with that

ltindi32 said:
I will upload the stock n915a cu2co2 5.1.1 for mega t pass the link to try with that
Click to expand...
Click to collapse
is this filmware with Odin3_v3.10.7. chek mark nand flash erase ALL_ATT_N915AUCU2COI2_N915AATT2COI2_CL5613658_QB6196305_REV00_user_low_ship_MULTI_CERT.tar.md5 enter the recovery mode and give him a factory resset and clear cache and comment. I improved my with this procedure. download it from herehttps://mega.nz/#!Ax5zEShb

ltindi32 said:
is this filmware with Odin3_v3.10.7. chek mark nand flash erase ALL_ATT_N915AUCU2COI2_N915AATT2COI2_CL5613658_QB6196305_REV00_user_low_ship_MULTI_CERT.tar.md5 enter the recovery mode and give him a factory resset and clear cache and comment. I improved my with this procedure. download it from herehttps://mega.nz/#!Ax5zEShb
Click to expand...
Click to collapse
It says I need the decryption key in order to dl the file.

pubtemp said:
It says I need the decryption key in order to dl the file.
Click to expand...
Click to collapse
!bawMPPRshf_1tFt1xeqtXh1a9zP1ow5KkRYaJlhXWf8

Hey guys, i have 1:1 the same problem with my n915fy. It dont boot and when i try to get in recovery it just stuck on booting recovery.
Have anyone the files for me too? I bought the phone Bricked.
Edit: Things I already tried:
Installed stock 5.1.1 per odin
Installed 5.1.1 per odin while checked the mark Nand earse all
Installed 4.4.4 per odin
Installed CWM per odin
Still stuck on Samsung Galaxy booting logo, when i try to go in Recovery menu its calls: " Recover booting" but just restart after one minute.
Hope someone can help me...
Btw where can i get pitfiles and would it help when i patch one?

pubtemp said:
Thanks, I managed to use the pit file and it got pass the brick page.
However, now the system goes into the Samsung Galaxy Note Edge loading screen and just stays there for a very long time and then restarts itself again....I pulled the battery out to manual shutdown (power button will not shut it down) and tried to go into recovery mode, it says loading recovery, but ends up restarting back to the Samsung loading screen indefinitely again. I would assume that's because the rom is dead at this point, and I would need to go to dl mode and flash a new stock rom back in ? What is my next step ?
Click to expand...
Click to collapse
You know what, try to clean power button. It may sticks. Pull battery and put small drop of rubbing alcohol. Then press couple times ( with out battery). Let dry for 10 min( you may use hair dryer on low power) . Put battery back and let us know.
Sent from my SAMSUNG-SM-N920A using XDA Premium HD app

Hey, i having the same problem, i was wondering if someone could make a step by step guide on how to fix it. also mine says mmc: mmc_write fail.
When i did Nand erase it says
mmc: mmc_read fail
ERASING USERDATA PARTITION

My SM-N915A went full dead on incomplete upgrade. Tried everything possible no lights, no vibration, no nothing: fill dear brick.
Was told its emmc corrupt.
Kindly help

can't you use samsung kies?

Hi to all. I was trying to recover some files with DrFone when it tried to root my phone. The rooting process failed and the phone bricked. If I try to power it on, it appears the writing "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
Obviously kies can't connect to the phone.
If I press pwr+vol_dn+home and then select "volume up" the phone goes in download mode but doesn't accept the reset of drfone, the download process freeze at half...
What can I do?
Thanks in advance!

try flashing only pitt file

is there anyone that does this upload , reload repair for others. are is there instructions to follow somewhere?

ltindi32 said:
pit file with Odin 3.07 0 3.09 single and tell me how it went
Click to expand...
Click to collapse
thanks for the pit file,saved my n915a after encountering "DRK error" after the 6.0.1 update. Cheers

SM-G920I stuck in boot loop, only boots into Download Mode

Hi all,
Long story short, phone got water damage, left in rice for month, tried to boot and it shows Samsung logo and reboots.
Tried several things which I'll list below, never got anywhere and I'd throw the phone back in a drawer and then a few months later I'd take it out and give it another go
Already have replacement but was looking to hopefully get family photos off it (yes I backup everything now)
So i've tried the following different Odin versions:
3.09, 3.10.6 + 3.12.3
I've downloaded my firmware version G920IDVU3FQF5_G920IVNZ3FQF1_VNZ from SamMobile webite and flashed with that.
Still same issue.
After flashing firmware I have also tried the following different versions of TWRP:
twrp-2.8.6.0-zeroflte.img
twrp-2.8.6.1-zeroflte.img
twrp-2.8.6.2-zeroflte.img
twrp-3.1.1-0-zeroflte.img
Still same issue although I do get the red text "recovery is not seandroid enforcing" along side Samsung Logo but reboots as always.
If only I could get into Recovery I could then mount SD and hopefully get access to photos.
Also tried using ADB to push and pull but no go :silly:
Am I missing something stupid?
I do have the pit file for my model but I'm under the impression it re-partitions everything and I'm guessing that would lose all data so I haven't tried that.
Also tried Samsung Smart Switch but it doesn't find the phone as I can only get it in Download Mode.
Any help would be appreciated :good:

alicg said:
Hi all,
Long story short, phone got water damage, left in rice for month, tried to boot and it shows Samsung logo and reboots.
Tried several things which I'll list below, never got anywhere and I'd throw the phone back in a drawer and then a few months later I'd take it out and give it another go
Already have replacement but was looking to hopefully get family photos off it (yes I backup everything now)
So i've tried the following different Odin versions:
3.09, 3.10.6 + 3.12.3
I've downloaded my firmware version G920IDVU3FQF5_G920IVNZ3FQF1_VNZ from SamMobile webite and flashed with that.
Still same issue.
After flashing firmware I have also tried the following different versions of TWRP:
twrp-2.8.6.0-zeroflte.img
twrp-2.8.6.1-zeroflte.img
twrp-2.8.6.2-zeroflte.img
twrp-3.1.1-0-zeroflte.img
Still same issue although I do get the red text "recovery is not seandroid enforcing" along side Samsung Logo but reboots as always.
If only I could get into Recovery I could then mount SD and hopefully get access to photos.
Also tried using ADB to push and pull but no go :silly:
Am I missing something stupid?
I do have the pit file for my model but I'm under the impression it re-partitions everything and I'm guessing that would lose all data so I haven't tried that.
Also tried Samsung Smart Switch but it doesn't find the phone as I can only get it in Download Mode.
Any help would be appreciated :good:
Click to expand...
Click to collapse
Try to flash CF-Auto-Root via Odin then latest TWRP. If you get in TWRP you will be know what to do

rifek4 said:
Try to flash CF-Auto-Root via Odin then latest TWRP. If you get in TWRP you will be know what to do
Click to expand...
Click to collapse
Still no luck after CF-Auto-Root and then latest TWRP....
Tried to flash firmware again.
With Odin v3.10.6 - flashed G920IDVU3FQF5_G920IVNZ3FQF1_G920IDVU3FQF1_HOME.tar.md5
------
<OSM> G920IDVU3FQF5_G920IVNZ3FQF1_G920IDVU3FQF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
-------
Fails about 20% into system.img.
I'll try flashing with different versions of Odin and report back tomorrow! :good:

alicg said:
Still no luck after CF-Auto-Root and then latest TWRP....
Tried to flash firmware again.
With Odin v3.10.6 - flashed G920IDVU3FQF5_G920IVNZ3FQF1_G920IDVU3FQF1_HOME.tar.md5
------
<OSM> G920IDVU3FQF5_G920IVNZ3FQF1_G920IDVU3FQF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
-------
Fails about 20% into system.img.
I'll try flashing with different versions of Odin and report back tomorrow! :good:
Click to expand...
Click to collapse
HERE you got all. Try latest stock firmware which you get via SamFirm. But BTW I don't wish good future for that phone after swimming in water

Used Odin v3.12.7 and flashed latest firmware > CF-Auto-Root > latest TWRP
No difference....still only boots to download mode.

alicg said:
Used Odin v3.12.7 and flashed latest firmware > CF-Auto-Root > latest TWRP
No difference....still only boots to download mode.
Click to expand...
Click to collapse
Try to hold Volume - + Home + Power for 30 sec and when phone restart (when you see Samsung logo) directly switch from Volume - to Volume + but hold also another two buttons, you should get recovery menu.

rifek4 said:
Try to hold Volume - + Home + Power for 30 sec and when phone restart (when you see Samsung logo) directly switch from Volume - to Volume + but hold also another two buttons, you should get recovery menu.
Click to expand...
Click to collapse
Still no recovery, the phone doesn't hold a charge anymore so it could be a motherboard issue too.
Doesn't turn on at all if not plugged into charger or PC. As soon as I plug it in it shows Android logo and reboots instantly.
Holding Volume Up + Power + Home does nothing, phone just keeps rebooting.
Only when I hold Volume Down + Power + Home does it show the warning screen and I can then choose Volume Up to Continue or Down to Cancel and reboot.
Think I've reached the limit with this phone

alicg said:
Still no recovery, the phone doesn't hold a charge anymore so it could be a motherboard issue too.
Doesn't turn on at all if not plugged into charger or PC. As soon as I plug it in it shows Android logo and reboots instantly.
Holding Volume Up + Power + Home does nothing, phone just keeps rebooting.
Only when I hold Volume Down + Power + Home does it show the warning screen and I can then choose Volume Up to Continue or Down to Cancel and reboot.
Think I've reached the limit with this phone
Click to expand...
Click to collapse
You holded phone in rice for a month etc, but while phone were in water battery was still connected to mobo, and that could makes shocks on mobo and now something can be just burned. And every battery after contact with water will don't hold charge as should

Samsung galaxy trend lite s-7392 Hard reset problem

when I try to hard reset my phone with the on/off, volume up, home buttons it turns on and then shows red Exclamation mark in the top left corner.
How can I reset it? I can't do it via settings because it always resterts

userkk0 said:
when I try to hard reset my phone with the on/off, volume up, home buttons it turns on and then shows red Exclamation mark in the top left corner.
How can I reset it? I can't do it via settings because it always resterts
Click to expand...
Click to collapse
Does it say anything like "Waiting for command" or anything? Typically the recovery is a red triangle and exclamation mark coming out of a android's chest. On some devices you have to give it a command to get the menu to pop up. It is usually hold vol+ and then tap power or hold power and tap vol+... can't remember it's been awhile.
It's an older device so finding all the necessary files should be easy...my other guess is that maybe at some point someone tried to flash a recovery on it but it didn't work. You should be able to download stock firmware from www.sammobile.com/firmwares/ and flash with Odin to get the original recovery back or try searching for a CWM or TWRP for it and flash it.
Sent from my SM-G360P using Tapatalk

RealWelder said:
Does it say anything like "Waiting for command" or anything? Typically the recovery is a red triangle and exclamation mark coming out of a android's chest. On some devices you have to give it a command to get the menu to pop up. It is usually hold vol+ and then tap power or hold power and tap vol+... can't remember it's been awhile.
It's an older device so finding all the necessary files should be easy...my other guess is that maybe at some point someone tried to flash a recovery on it but it didn't work. You should be able to download stock firmware from www.sammobile.com/firmwares/ and flash with Odin to get the original recovery back or try searching for a CWM or TWRP for it and flash it.
Sent from my SM-G360P using Tapatalk
Click to expand...
Click to collapse
It just shows the 'Samsung Galaxy...' Logo and the red Exclamation mark at the top left corner.
I tried the vol+ , on/off button, doesn't work
It started to happen after I installed some aplication, I'm not sure if it because of that because it didn't happen imidiatly after that
What am I supposed to do with those files?
Thanks

userkk0 said:
It just shows the 'Samsung Galaxy...' Logo and the red Exclamation mark at the top left corner.
I tried the vol+ , on/off button, doesn't work
It started to happen after I installed some aplication, I'm not sure if it because of that because it didn't happen imidiatly after that
What am I supposed to do with those files?
Thanks
Click to expand...
Click to collapse
You'll have to install Samsung Universal USB drivers on your computer. Then also download Odin and the correct firmware for your device.
Then power off the phone and hold vol-, home, and power. It should pop up and say caution installing a custom OS can be dangerous... Next press vol+ to enter Odin Mode/Download Mode. Hook the phone to he pc and open Odin. It should show a blue block with a com number if it recognizes the phone. If not then reinstall drivers. Next load the firmware into the AP slot of Odin and hit start. If everything goes according to plan, you'll be back to stock.
Sent from my SM-G360P using Tapatalk

The link you gave me to download firmewirk ask me to become a premium user.
Where else can I get it?

userkk0 said:
The link you gave me to download firmewirk ask me to become a premium user.
Where else can I get it?
Click to expand...
Click to collapse
You do have to have an account to download and the premium is just to download at a faster speed. It is the official Samsung site for firmwares. You can trust it.
Sent from my SM-G360P using Tapatalk

Okay, I can't find my country there..does it make any different?

userkk0 said:
Okay, I can't find my country there..does it make any different?
Click to expand...
Click to collapse
I usually just go for whichever has the closest language to what I speak.
Sent from my SM-G360P using Tapatalk

I really can't find how to download it, all it shows is
"This firmware is only available for premium users.
Please click here to become premium."

userkk0 said:
I really can't find how to download it, all it shows is
"This firmware is only available for premium users.
Please click here to become premium."
Click to expand...
Click to collapse
I got on my computer and am having the same issue, not sure why.
You can try from here. Hopefully it will let you download it.
https://androidmtk.com/samsung-galaxy-trend-s7392-stock-rom

RealWelder said:
I got on my computer and am having the same issue, not sure why.
You can try from here. Hopefully it will let you download it.
https://androidmtk.com/samsung-galaxy-trend-s7392-stock-rom
Click to expand...
Click to collapse
Is it supposed to be almost 500 MB?

userkk0 said:
Is it supposed to be almost 500 MB?
Click to expand...
Click to collapse
It's the phones entire operating system so you should feel lucky. Most these days are upwards of 1.4g
Sent from my SM-G360P using Tapatalk

RealWelder said:
You'll have to install Samsung Universal USB drivers on your computer. Then also download Odin and the correct firmware for your device.
Then power off the phone and hold vol-, home, and power. It should pop up and say caution installing a custom OS can be dangerous... Next press vol+ to enter Odin Mode/Download Mode. Hook the phone to he pc and open Odin. It should show a blue block with a com number if it recognizes the phone. If not then reinstall drivers. Next load the firmware into the AP slot of Odin and hit start. If everything goes according to plan, you'll be back to stock.
Sent from my SM-G360P using Tapatalk
Click to expand...
Click to collapse
This is what the 'Log' in Odin shows me:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> BcmCP.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

userkk0 said:
This is what the 'Log' in Odin shows me:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> BcmCP.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hmmm. Does the device go into recovery now since Odin got that far?
Sent from my SM-G360P using Tapatalk

RealWelder said:
Hmmm. Does the device go into recovery now since Odin got that far?
Sent from my SM-G360P using Tapatalk
Click to expand...
Click to collapse
The phone shows 'Downloading...'
Do not turn off target !!
And a small, what seems to be a blue progress bar, but it doesn't move

What could I do?

userkk0 said:
What could I do?
Click to expand...
Click to collapse
Try to download Kies or SmartSwitch and see if they can recover it. They are both official samsung programs, kies is for older devices and SS is for newer devices.
One of the two should recognize the phone when in download mode. Also, to exit download mode you can just hold vol+ and power or about 8 seconds.
Sent from my SM-G360P using Tapatalk

Need Help in Fixing My Tablet - SM-T111

Hello everyone,
I bought a tablet - 'Samsung Galaxy Tab 3 Neo SM-T111 Tablet (8GB, WiFi, 3G, Voice Calling)' a couple of years ago (maybe 2 years??). Last month I ran into a problem. I charged it overnight (which I did many times) and the next morning I saw that the tab was stuck on charging screen. I tried many methods but still it is stuck on this loop.
To clarify, I have never, ever rooted or flashed this device before, no matter how tempting it sounded.
Since then, I have tried fixing it myself quite a number of times but did not find a way to fix it.
What I have tried -
1. Holding the power button + volume up/down button (without pressing the home button).
2. Pressing the power button + volume down button + home button to enter the download mode. Then I downloaded the samsung kies drivers., Odin3 3.12 and the firmware T111XXUBOC2_T111ODDBOC2_T111XXUAOC2_HOME.tar.md5. I opened the Odin software and selected the firmware in AP. The options which were selected are Auto Reboot and F. Reset Time which created the following log
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> timh.bin
<ID:0/003> obm.bin
<ID:0/003> DTim.Recovery
<ID:0/003> loke_2nd.bin
<ID:0/003> DTim.Primary
<ID:0/003> loke_1st.bin
<ID:0/003> param.lfs
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
3. I tried extracting the file recovery.img from the firmware but while mounting it, the error dialog box showed - "The disc image file is corrupted".
Despite all these efforts, the tablet still does not work.

Sword1 said:
Hello everyone, I bought a tablet - 'Samsung Galaxy Tab 3 Neo SM-T111 Tablet (8GB, WiFi, 3G, Voice Calling)' a couple of years ago (maybe 2 years??). Last month I ran into a problem. I charged it overnight (which I did many times) and the next morning I saw that the tab was stuck on charging screen. I tried many methods but still it is stuck on this loop...
Click to expand...
Click to collapse
I don't have this device but, you may be able to obtain some member guidance within one of the following threads that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=2755532
https://forum.xda-developers.com/showthread.php?t=2926353
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.

Actually I don't know the first thing about rooting or flashing. I just googled stuff and watched a few tutorial videos. From what I can tell, the process stops after reaching the recovery.img and system.img.
So....... I want to know what I should do - download a custom firmware, download another firmware or get the recovery.img file from somewhere and then mount it?
P.S. I downloaded 2 firmwares from different locations and the chances of both of them being corrupted are kinda slim.