when I try to hard reset my phone with the on/off, volume up, home buttons it turns on and then shows red Exclamation mark in the top left corner.
How can I reset it? I can't do it via settings because it always resterts
userkk0 said:
when I try to hard reset my phone with the on/off, volume up, home buttons it turns on and then shows red Exclamation mark in the top left corner.
How can I reset it? I can't do it via settings because it always resterts
Click to expand...
Click to collapse
Does it say anything like "Waiting for command" or anything? Typically the recovery is a red triangle and exclamation mark coming out of a android's chest. On some devices you have to give it a command to get the menu to pop up. It is usually hold vol+ and then tap power or hold power and tap vol+... can't remember it's been awhile.
It's an older device so finding all the necessary files should be easy...my other guess is that maybe at some point someone tried to flash a recovery on it but it didn't work. You should be able to download stock firmware from www.sammobile.com/firmwares/ and flash with Odin to get the original recovery back or try searching for a CWM or TWRP for it and flash it.
Sent from my SM-G360P using Tapatalk
RealWelder said:
Does it say anything like "Waiting for command" or anything? Typically the recovery is a red triangle and exclamation mark coming out of a android's chest. On some devices you have to give it a command to get the menu to pop up. It is usually hold vol+ and then tap power or hold power and tap vol+... can't remember it's been awhile.
It's an older device so finding all the necessary files should be easy...my other guess is that maybe at some point someone tried to flash a recovery on it but it didn't work. You should be able to download stock firmware from www.sammobile.com/firmwares/ and flash with Odin to get the original recovery back or try searching for a CWM or TWRP for it and flash it.
Sent from my SM-G360P using Tapatalk
Click to expand...
Click to collapse
It just shows the 'Samsung Galaxy...' Logo and the red Exclamation mark at the top left corner.
I tried the vol+ , on/off button, doesn't work
It started to happen after I installed some aplication, I'm not sure if it because of that because it didn't happen imidiatly after that
What am I supposed to do with those files?
Thanks
userkk0 said:
It just shows the 'Samsung Galaxy...' Logo and the red Exclamation mark at the top left corner.
I tried the vol+ , on/off button, doesn't work
It started to happen after I installed some aplication, I'm not sure if it because of that because it didn't happen imidiatly after that
What am I supposed to do with those files?
Thanks
Click to expand...
Click to collapse
You'll have to install Samsung Universal USB drivers on your computer. Then also download Odin and the correct firmware for your device.
Then power off the phone and hold vol-, home, and power. It should pop up and say caution installing a custom OS can be dangerous... Next press vol+ to enter Odin Mode/Download Mode. Hook the phone to he pc and open Odin. It should show a blue block with a com number if it recognizes the phone. If not then reinstall drivers. Next load the firmware into the AP slot of Odin and hit start. If everything goes according to plan, you'll be back to stock.
Sent from my SM-G360P using Tapatalk
The link you gave me to download firmewirk ask me to become a premium user.
Where else can I get it?
userkk0 said:
The link you gave me to download firmewirk ask me to become a premium user.
Where else can I get it?
Click to expand...
Click to collapse
You do have to have an account to download and the premium is just to download at a faster speed. It is the official Samsung site for firmwares. You can trust it.
Sent from my SM-G360P using Tapatalk
Okay, I can't find my country there..does it make any different?
userkk0 said:
Okay, I can't find my country there..does it make any different?
Click to expand...
Click to collapse
I usually just go for whichever has the closest language to what I speak.
Sent from my SM-G360P using Tapatalk
I really can't find how to download it, all it shows is
"This firmware is only available for premium users.
Please click here to become premium."
userkk0 said:
I really can't find how to download it, all it shows is
"This firmware is only available for premium users.
Please click here to become premium."
Click to expand...
Click to collapse
I got on my computer and am having the same issue, not sure why.
You can try from here. Hopefully it will let you download it.
https://androidmtk.com/samsung-galaxy-trend-s7392-stock-rom
RealWelder said:
I got on my computer and am having the same issue, not sure why.
You can try from here. Hopefully it will let you download it.
https://androidmtk.com/samsung-galaxy-trend-s7392-stock-rom
Click to expand...
Click to collapse
Is it supposed to be almost 500 MB?
userkk0 said:
Is it supposed to be almost 500 MB?
Click to expand...
Click to collapse
It's the phones entire operating system so you should feel lucky. Most these days are upwards of 1.4g
Sent from my SM-G360P using Tapatalk
RealWelder said:
You'll have to install Samsung Universal USB drivers on your computer. Then also download Odin and the correct firmware for your device.
Then power off the phone and hold vol-, home, and power. It should pop up and say caution installing a custom OS can be dangerous... Next press vol+ to enter Odin Mode/Download Mode. Hook the phone to he pc and open Odin. It should show a blue block with a com number if it recognizes the phone. If not then reinstall drivers. Next load the firmware into the AP slot of Odin and hit start. If everything goes according to plan, you'll be back to stock.
Sent from my SM-G360P using Tapatalk
Click to expand...
Click to collapse
This is what the 'Log' in Odin shows me:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> BcmCP.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
userkk0 said:
This is what the 'Log' in Odin shows me:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> BcmCP.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hmmm. Does the device go into recovery now since Odin got that far?
Sent from my SM-G360P using Tapatalk
RealWelder said:
Hmmm. Does the device go into recovery now since Odin got that far?
Sent from my SM-G360P using Tapatalk
Click to expand...
Click to collapse
The phone shows 'Downloading...'
Do not turn off target !!
And a small, what seems to be a blue progress bar, but it doesn't move
What could I do?
userkk0 said:
What could I do?
Click to expand...
Click to collapse
Try to download Kies or SmartSwitch and see if they can recover it. They are both official samsung programs, kies is for older devices and SS is for newer devices.
One of the two should recognize the phone when in download mode. Also, to exit download mode you can just hold vol+ and power or about 8 seconds.
Sent from my SM-G360P using Tapatalk
Related
I can't get download mode.
My tablet was off... when I turned on, was on a bootloop. I couldn't get into recovery, then I've enter into download mode. I tried to flash a stock rom, but odin failed.
Then I lost download mode and the tablet only shows a phone, a triangle and a computer.
When I plug to charger, doesn't shows the battery icon, but battery charges.
Maybe this is a brick?...
Thanks!
help
ofwise said:
I can't get download mode.
My tablet was off... when I turned on, was on a bootloop. I couldn't get into recovery, then I've enter into download mode. I tried to flash a stock rom, but odin failed.
Then I lost download mode and the tablet only shows a phone, a triangle and a computer.
When I plug to charger, doesn't shows the battery icon, but battery charges.
Maybe this is a brick?...
Thanks!
Click to expand...
Click to collapse
I might not be able to help but you can, can you let us know what ROM/recovery/what you were doing before you turned off your tab and anything else you can think of that may be relevant
Thanks
It's download mode with a different interface Reflash your Tab, use Odin.
I've installed cyanogen 10.1 RC without problems. The tablet worked fine. Then I plugged the tablet to charge. When I took again the tablet (after 10 hours more or less) it was off.
In this mode (triangle, computer, phone), I'm trying flashing a stock rom. Without pit file, odin fails saying "write error", and with pit file and repartion checkbox marked sais "there's no pit partition".
Only way to turn off the tablet is quitting the battery. When I put again the battery, the tablet still is off; but when I try to turn on/get into download mode/get into recovery... only shows the triangle, phone and computer screen...
I think that my galaxy tab is bricked... :crying:
Sorry about my bad english and thanks for your answers.
Odin shows this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3100XWALD2_P3100OXXALE2_P3100XXLD4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
ofwise said:
Odin shows this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3100XWALD2_P3100OXXALE2_P3100XXLD4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try heimdall. Never tried by myself flashing system partition using it but work for recovery, boot, and param partition.
ofwise said:
Odin shows this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3100XWALD2_P3100OXXALE2_P3100XXLD4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try to go into download mode and flash a custom recovery using odin. I recommend CWM. Then try to go into recovery mode and wipe data, cache, dalvik cache and factory reset (NOTE: It will delete EVERYTHING and your tab will be like out of the box). Now try to boot into android, if android doesn't boots up then use odin to flash a custom rom or find a stock rom for your device and then your tablet should be fine.
Good luck :thumbup: and happy flashing .
And if you found this helpful then don't forget to hit the thanks button.
Sent from my GT-P3100 using xda app-developers app
Nothing...
I've tried Heimdall and doesn't detect my device. I've tried to install another one CWM and the same problem...
I've reinstalled the samsung drivers into 2 computers, differents usb ports... no recovery, no download mode and the charging icon (battery icon) doesn't appear (but charges).
I think my tab is dead... I don't know how more I can do it.
Thanks for the ideas
OK, first off, that screen is a FORCED DOWNLOAD MODE, it will happen for several reasons (usually a bad ROM flash), all you had to do was flash the stock .tar file via Odin.
Your first mistake was checking "repartition" in Odin, YOU NEVER EVER WANT TO DO THAT EVER, now since you didn't have a PIT hopefully it just cancelled out before doing anything bad. try reflashing in Odin with the stock ROM.
Heimdall will not work just because you have the drivers for Odin, infact Heimdall has it's own DRIVER that will override the Samsung driver Odin uses on the USB port (and usually any other USB on that stack) you connect the tablet to when you do the driver install step in Heimdall.
FYI, if you are on windows 8 there is a good chance you still can't do jack yet, to my knowledge windows 8 PC's are a no go for android ROM flashing.
The computers I've tried to flash with odin are with windows 8. But I flash my phone without problems...
Maybe with another windows version. I'll give a try this afternoon at home.
Thanks!!
daniel644 said:
OK, first off, that screen is a FORCED DOWNLOAD MODE, it will happen for several reasons (usually a bad ROM flash), all you had to do was flash the stock .tar file via Odin.
Your first mistake was checking "repartition" in Odin, YOU NEVER EVER WANT TO DO THAT EVER, now since you didn't have a PIT hopefully it just cancelled out before doing anything bad. try reflashing in Odin with the stock ROM.
Heimdall will not work just because you have the drivers for Odin, infact Heimdall has it's own DRIVER that will override the Samsung driver Odin uses on the USB port (and usually any other USB on that stack) you connect the tablet to when you do the driver install step in Heimdall.
FYI, if you are on windows 8 there is a good chance you still can't do jack yet, to my knowledge windows 8 PC's are a no go for android ROM flashing.
Click to expand...
Click to collapse
I've only used Windows 8 for flashing so far and works perfectly fine in my experience
Trying with a pc on windows xp and the same situation... odin sais allways the same...
I've put a pit file that I found called "signed_espresso_20120220_16G.pit". I can't remember if I used another time... I'm not sure. But this last time I use it.
Could I do something more??...
ofwise said:
Trying with a pc on windows xp and the same situation... odin sais allways the same...
I've put a pit file that I found called "signed_espresso_20120220_16G.pit". I can't remember if I used another time... I'm not sure. But this last time I use it.
Could I do something more??...
Click to expand...
Click to collapse
YOU shouldn't EVER use a PIT file in Odin, especially if your not even sure it's the right one, using an incorrect PIT file can totally screw up your device.
The ONLY time you could ever need a PIT file is if you flashed a ROM that changed the format of the partition tables (like rfs to mtd or bml) which to my knowledge non of the ROM for these tablets do that.
Hrmmm... Have you tried to see if Samsung Kies can do anything about it?
I mean, really. Your system partition is corrupt so i doubt it can detect anything.
As a last resort could you open up the tab and pull out the battery? Or even let the battery completely run out?
I've already pulled out the battery many times. Letting the tab without battery at least 1 hour... 1 day... and when I plug it and try to access to download mode... only the same screen (triangle, phone and computer).
ofwise said:
I've already pulled out the battery many times. Letting the tab without battery at least 1 hour... 1 day... and when I plug it and try to access to download mode... only the same screen (triangle, phone and computer).
Click to expand...
Click to collapse
Check this out ofwise- h**ps://www.youtube.com/watch?v=pJnoiMTw5cY&feature=youtube_gdata_player
Note-replace (**) in the link with (tt).
Sent from my GT-P3100 using xda app-developers app
Fastboot sais "Waiting device"...
ofwise said:
Fastboot sais "Waiting device"...
Click to expand...
Click to collapse
Well, your f*cked.
Sent from my GT-P3113 using Tapatalk HD
Son was playing Words With Friends and this Samsung Galaxy Tab 2 7" GT-P3113 was acting up. Only other recent change was my wife downloaded a Southern Living magazine. The screen went dark blue like it was on but not responsive.
None of the lengthy holding down the Power or Power and Volume Up would ever produce a reboot, only a battery symbol. I did get it into the load an alternate OS screen, but didn't try it.
Took into a Samsung Experience desk at Best Buy and they said it was DEAD. Apologized that this year and a half old unit was done and said that was "probably not what we were expecting as far as lifespan of the unit." Ya think????
Came home, as a complete noob with nothing to lose and downloaded Odin and the files to try and load the recovery. Odin recognized the device and tried to start installing but got to the first step and FAILED. Something about NAND.
So in your opinion is this completely dead or maybe I don't have the right files? If you have current links to the right files please point them out to me. I've spent tons of times find links that are dead.
Thanks!
dailyvideo said:
Son was playing Words With Friends and this Samsung Galaxy Tab 2 7" GT-P3113 was acting up. Only other recent change was my wife downloaded a Southern Living magazine. The screen went dark blue like it was on but not responsive.
None of the lengthy holding down the Power or Power and Volume Up would ever produce a reboot, only a battery symbol. I did get it into the load an alternate OS screen, but didn't try it.
Took into a Samsung Experience desk at Best Buy and they said it was DEAD. Apologized that this year and a half old unit was done and said that was "probably not what we were expecting as far as lifespan of the unit." Ya think????
Came home, as a complete noob with nothing to lose and downloaded Odin and the files to try and load the recovery. Odin recognized the device and tried to start installing but got to the first step and FAILED. Something about NAND.
So in your opinion is this completely dead or maybe I don't have the right files? If you have current links to the right files please point them out to me. I've spent tons of times find links that are dead.
Thanks!
Click to expand...
Click to collapse
Does it mean you could reach the download mode? That would mean your Tab is not "dead".... (what kind of guy was that in the service?)
Try to see if you can get into the recovery mode (keep pressed power button & volume up and after Samsung logo appears second time, release the power button and keep the other one still pressed for about 5sec). If you get there, make factory reset and reboot. This will wipe your data....
Or if you can access download mode (power & volume down) turn it on again and download some recent firmware from www.sammobile.com exactly for your Tab model. In such case, reply my post and I will write you how to flash it with Odin.
No logo for reboot, which sammobile files?
tetakpatak said:
Does it mean you could reach the download mode? That would mean your Tab is not "dead".... (what kind of guy was that in the service?)
Try to see if you can get into the recovery mode (keep pressed power button & volume up and after Samsung logo appears second time, release the power button and keep the other one still pressed for about 5sec). If you get there, make factory reset and reboot. This will wipe your data....
Or if you can access download mode (power & volume down) turn it on again and download some recent firmware from sammobile exactly for your Tab model. In such case, reply my post and I will write you how to flash it with Odin.
Click to expand...
Click to collapse
Tetakpatak,
Thanks for jumping in!!!
1. That's the thing. We can never get the unit itself to the logo screen using that method, only the battery screen with a little sunshine symbol inside of it and only when the unit is plugged in.
2. I found sammobile before but my search for GT-P3113 produces only Cellular South files. This is a wifi tab only without a carrier. Does that make a difference? Can I use any of the listed files? Should I try each one?
Thanks!!!
No luck with sammobile files yet
tetakpatak said:
Does it mean you could reach the download mode? That would mean your Tab is not "dead".... (what kind of guy was that in the service?)
Try to see if you can get into the recovery mode (keep pressed power button & volume up and after Samsung logo appears second time, release the power button and keep the other one still pressed for about 5sec). If you get there, make factory reset and reboot. This will wipe your data....
Or if you can access download mode (power & volume down) turn it on again and download some recent firmware from sammobile exactly for your Tab model. In such case, reply my post and I will write you how to flash it with Odin.
Click to expand...
Click to collapse
tetakpatak, thanks for your help! please see my other reply.
i went ahead and tried one of the sammobile files. guessing as to which one because this is a wifi not cellular tab. when i ran it i got...
>Firmware update start
>SingleDownload
>boot.img
>NAND Write Start!!
>FAIL!
>
>Complete(Write) operation failed.
>All threads completed. (succeed 0 / failed 1)
Does this mean it is completely dead or do I need to keep trying files from sammobile?
Thanks!!!
dailyvideo said:
tetakpatak, thanks for your help! please see my other reply.
i went ahead and tried one of the sammobile files. guessing as to which one because this is a wifi not cellular tab. when i ran it i got...
>Firmware update start
>SingleDownload
>boot.img
>NAND Write Start!!
>FAIL!
>
>Complete(Write) operation failed.
>All threads completed. (succeed 0 / failed 1)
Does this mean it is completely dead or do I need to keep trying files from sammobile?
Thanks!!!
Click to expand...
Click to collapse
Hmmm, it isn't definitely dead, of course. That guy in the service was anyway bit dumb IMO.
With JTAG, man of skills can repair any device, no matter how hard bricked.
Actually to get further, it would help to know if you can reach download mode or recovery mode?
Tried two more from sammobile
tetakpatak said:
Does it mean you could reach the download mode? That would mean your Tab is not "dead".... (what kind of guy was that in the service?)
Try to see if you can get into the recovery mode (keep pressed power button & volume up and after Samsung logo appears second time, release the power button and keep the other one still pressed for about 5sec). If you get there, make factory reset and reboot. This will wipe your data....
Or if you can access download mode (power & volume down) turn it on again and download some recent firmware from sammobile exactly for your Tab model. In such case, reply my post and I will write you how to flash it with Odin.
Click to expand...
Click to collapse
Tetakpatak,
Tried two more from sammobile and both failed. Once mentioned NAND and the other did not. I see there is a NAND Erase option in Odin. Is that something I should be checking before Starting?
Not sure what else to do.
Thanks.
Reply
tetakpatak said:
Hmmm, it isn't definitely dead, of course. That guy in the service was anyway bit dumb IMO.
With JTAG, man of skills can repair any device, no matter how hard bricked.
Actually to get further, it would help to know if you can reach download mode or recovery mode?
Click to expand...
Click to collapse
Sure, I can hold Power and Volume Down to get to the screen to load a custom OS.
I'm
1. Opening Odin
2. Loading in the file from sammobile in the AP field
3. Leaving Auto Reboot and F, Reset Time checked.
4. Letting Odin check the validity of the sammobile file
5. Then plugging in the GT-P3113 and hitting Start in Odin
Thanks.
dailyvideo said:
Sure, I can hold Power and Volume Down to get to the screen to load a custom OS.
I'm
1. Opening Odin
2. Loading in the file from sammobile in the AP field
3. Leaving Auto Reboot and F, Reset Time checked.
4. Letting Odin check the validity of the sammobile file
5. Then plugging in the GT-P3113 and hitting Start in Odin
Thanks.
Click to expand...
Click to collapse
OK, @dailyvideo don't flash any P3110 build because the bootloaders differ in something!!
I have got meanwhile for you download links of an excellent stock UEUCMK3 firmware for your P3113 click HERE or you can also download it HERE
Now your flashing checklist:
use entirely Odin v1.85 or 3.04
run Odin as administrator
choose any stock firmware for your Tab and download (you probably did already), unzip it and you will get one tar-md5 file
tap in Odin on PDA, choose that extracted single tar.md5 file
run now (not before) your Tab into download mode
connect it with USB cable
Odin must display "Added" in status bar, left on the bottom
Odin must also display ID:COM port numer above it
If both there, click on "START"
Good luck!
Didn't work
I was using Odin 3.09 so I went back to 3.04 per your suggestion. I tried UEUCMK3 firmware I had already downloaded. Still didn't work...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_XAR_P3113UEUCMK3_1978026_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Suppose I could try to use the firmware link you provided in case it is different. It's still downloading. Any other thoughts?
Thanks so much for your help.
dailyvideo said:
I was using Odin 3.09 so I went back to 3.04 per your suggestion. I tried UEUCMK3 firmware I had already downloaded. Still didn't work...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_XAR_P3113UEUCMK3_1978026_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Suppose I could try to use the firmware link you provided in case it is different. It's still downloading. Any other thoughts?
Thanks so much for your help.
Click to expand...
Click to collapse
NAND is vital part of the device, IDK if it has to do with the bootloader. We might need a developer's advice, @Android-Andi, what do you think- can we help this poor mate?
Still trying
Ran again with your firmware and got the same results...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_XAR_P3113UEUCMK3_1978026_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I tought I just wrote back....? My post is gone...
NAND is vital part of the device, may consist bootloader or some other really important things.... IDK exactly, we might need a developer's advice here. @Android-Andi what do you say about this problem?
Thanks, next?
tetakpatak said:
I tought I just wrote back....? My post is gone...
NAND is vital part of the device, may consist bootloader or some other really important things.... IDK exactly, we might need a developer's advice here. @Android-Andi what do you say about this problem?
Click to expand...
Click to collapse
Tetapatak, Thanks for all your attempts to help! Super appreciate that.
Did you need me to reach out to @Android-Andi or did you post do that automatically?
I saw another post where someone did a partition and then came back and did your procedure and it worked but it wasn't for a GT-P3113. Not sure if that would work. I won't try it unless directed to.
Thanks.
dailyvideo said:
Tetapatak, Thanks for all your attempts to help! Super appreciate that.
Did you need me to reach out to @Android-Andi or did you post do that automatically?
I saw another post where someone did a partition and then came back and did your procedure and it worked but it wasn't for a GT-P3113. Not sure if that would work. I won't try it unless directed to.
Thanks.
Click to expand...
Click to collapse
He will see our mentioning and check this as soon as he can (he works now).
Try to google a bit about NAND partition, don't panic and have bit of patience, we will try to solve it.
Service can solve it for sure (not the dumb guy you've talked to )
Will wait
tetakpatak said:
He will see our mentioning and check this as soon as he can (he works now).
Try to google a bit about NAND partition, don't panic and have bit of patience, we will try to solve it.
Service can solve it for sure (not the dumb guy you've talked to )
Click to expand...
Click to collapse
Thanks will wait to hear back from you guys. Really can't tell you how thankful I am.
To the guy's credit at the Samsung Experience desk at Best Buy he couldn't get the OS screen to come up. I have trouble with it too at times unless there is enough of a charge. He said if he could get it to a certain point he could drill in and work with the code and really wanted to. I think because he could get to the OS screen he just assumed it was dead. To his credit too his dad died within 48 hours of our visit to the store.
Looking forward to the wizard advice.
dailyvideo said:
Tetapatak, Thanks for all your attempts to help! Super appreciate that.
Did you need me to reach out to @Android-Andi or did you post do that automatically?
I saw another post where someone did a partition and then came back and did your procedure and it worked but it wasn't for a GT-P3113. Not sure if that would work. I won't try it unless directed to.
Thanks.
Click to expand...
Click to collapse
Can you give this firmware a shot ?
http://terafile.co/82942a5b4d57/P3113UEUCMK3_P3113XARCMK3_XAR.zip
and one more mirror link if download speed is slow from above URL :
http://rapidgator.net/file/ec20cf98f5f712958760fd2b0457f939
But please make sure only Auto-reboot and Reset time are checked inside odin.......
No luck with new firware
Thanks lokesh, but still no luck. Here were the results...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_XAR_P3113UEUCMK3_1978026_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
dailyvideo said:
Thanks lokesh, but still no luck. Here were the results...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_XAR_P3113UEUCMK3_1978026_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Brother, Try using this .pit file that i am gonno share :
https://www.dropbox.com/s/wvn09tw1780irei/gt-p3110.pit
click on PDA in Odin and navigate to .pit file you have downloaded.
Now select the firmware you have downloaded as PDA and make sure only reboot option,,Repartition and reset time are checked.
Try this and give me a feedback soon.
Clarifying
lokesh.3440 said:
Brother, Try using this .pit file that i am gonno share :
https://www.dropbox.com/s/wvn09tw1780irei/gt-p3110.pit
click on PDA in Odin and navigate to .pit file you have downloaded.
Now select the firmware you have downloaded as PDA and make sure only reboot option,,Repartition and reset time are checked.
Try this and give me a feedback soon.
Click to expand...
Click to collapse
Lokesh,
Thanks for hanging in there with me. Just to clarify. Are you saying load your .pit file with the PIT button because when I click PDA to try and load that a .pit is not a valid extension.
Also, are you saying to load the .pit with PIT and the .md5 file with PDA ans Start with the Auto Reboot, Re-Partition, and F. Reset Time Options checked?
Just making sure I have all this right.
Thanks.
dailyvideo said:
Lokesh,
Thanks for hanging in there with me. Just to clarify. Are you saying load your .pit file with the PIT button because when I click PDA to try and load that a .pit is not a valid extension.
Also, are you saying to load the .pit with PIT and the .md5 file with PDA ans Start with the Auto Reboot, Re-Partition, and F. Reset Time Options checked?
Just making sure I have all this right.
Thanks.
Click to expand...
Click to collapse
You should choose in Odin just like last time: firmware under PDA. In addition, also choose PIT file under PIT. The PIT file will ensure your system partitions will be set properly.
If this also fails, it is possible that your internal memory is maybe corrupted and nothing can be written on the card.
Hi All,
I was using the SM-N915A as normal...then i left it idle for a while and came back saw it kept resetting itself. I tried clear cache partition already didnt' work. It keeps looping on startup after the samsung logo. It got worst as time went on, it wont even load into recovery anymore, it just loads with the android icon saying it's updating then freezes and restarts....I read that I can manual recover using Odin. I used odin and a stock rom to fix it, but the rom failed now i am bricked. Please help.
Odin3 v3.10.7
Stock Rom: AP_N915AUCU1BOC6_CL4376893_QB4361884_REV00_user_low_ship_MULTI_CERT.tar
Log
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this point i am bricked..."the phone just says firmware upgrade encountered an issue please recover mode in Kies and try again" Kies/SS doesn't work, when i plug in this phone, it doesn't recognize it.
What can I do now?
pubtemp said:
Hi All,
I was using the SM-N915A as normal...then i left it idle for a while and came back saw it kept resetting itself. I tried clear cache partition already didnt' work. It keeps looping on startup after the samsung logo. It got worst as time went on, it wont even load into recovery anymore, it just loads with the android icon saying it's updating then freezes and restarts....I read that I can manual recover using Odin. I used odin and a stock rom to fix it, but the rom failed now i am bricked. Please help.
Odin3 v3.10.7
Stock Rom: AP_N915AUCU1BOC6_CL4376893_QB4361884_REV00_user_low_ship_MULTI_CERT.tar
Log
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this point i am bricked..."the phone just says firmware upgrade encountered an issue please recover mode in Kies and try again" Kies/SS doesn't work, when i plug in this phone, it doesn't recognize it.
What can I do now?
Click to expand...
Click to collapse
Get md5 tar file & make sure your in download mode connect phone to Odin and try again
pit file with Odin 3.07 0 3.09 single and tell me how it went
pubtemp said:
Hi All,
I was using the SM-N915A as normal...then i left it idle for a while and came back saw it kept resetting itself. I tried clear cache partition already didnt' work. It keeps looping on startup after the samsung logo. It got worst as time went on, it wont even load into recovery anymore, it just loads with the android icon saying it's updating then freezes and restarts....I read that I can manual recover using Odin. I used odin and a stock rom to fix it, but the rom failed now i am bricked. Please help.
Odin3 v3.10.7
Stock Rom: AP_N915AUCU1BOC6_CL4376893_QB4361884_REV00_user_low_ship_MULTI_CERT.tar
Log
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this point i am bricked..."the phone just says firmware upgrade encountered an issue please recover mode in Kies and try again" Kies/SS doesn't work, when i plug in this phone, it doesn't recognize it.
What can I do now?
Click to expand...
Click to collapse
ltindi32 said:
pit file with Odin 3.07 0 3.09 single and tell me how it went
Click to expand...
Click to collapse
Thanks, I managed to use the pit file and it got pass the brick page.
However, now the system goes into the Samsung Galaxy Note Edge loading screen and just stays there for a very long time and then restarts itself again....I pulled the battery out to manual shutdown (power button will not shut it down) and tried to go into recovery mode, it says loading recovery, but ends up restarting back to the Samsung loading screen indefinitely again. I would assume that's because the rom is dead at this point, and I would need to go to dl mode and flash a new stock rom back in ? What is my next step ?
pubtemp said:
Thanks, I managed to use the pit file and it got pass the brick page.
However, now the system goes into the Samsung Galaxy Note Edge loading screen and just stays there for a very long time and then restarts itself again....I pulled the battery out to manual shutdown (power button will not shut it down) and tried to go into recovery mode, it says loading recovery, but ends up restarting back to the Samsung loading screen indefinitely again. I would assume that's because the rom is dead at this point, and I would need to go to dl mode and flash a new stock rom back in ? What is my next step ?
Click to expand...
Click to collapse
I will upload the stock n915a cu2co2 5.1.1 for mega t pass the link to try with that
ltindi32 said:
I will upload the stock n915a cu2co2 5.1.1 for mega t pass the link to try with that
Click to expand...
Click to collapse
is this filmware with Odin3_v3.10.7. chek mark nand flash erase ALL_ATT_N915AUCU2COI2_N915AATT2COI2_CL5613658_QB6196305_REV00_user_low_ship_MULTI_CERT.tar.md5 enter the recovery mode and give him a factory resset and clear cache and comment. I improved my with this procedure. download it from herehttps://mega.nz/#!Ax5zEShb
ltindi32 said:
is this filmware with Odin3_v3.10.7. chek mark nand flash erase ALL_ATT_N915AUCU2COI2_N915AATT2COI2_CL5613658_QB6196305_REV00_user_low_ship_MULTI_CERT.tar.md5 enter the recovery mode and give him a factory resset and clear cache and comment. I improved my with this procedure. download it from herehttps://mega.nz/#!Ax5zEShb
Click to expand...
Click to collapse
It says I need the decryption key in order to dl the file.
pubtemp said:
It says I need the decryption key in order to dl the file.
Click to expand...
Click to collapse
!bawMPPRshf_1tFt1xeqtXh1a9zP1ow5KkRYaJlhXWf8
Hey guys, i have 1:1 the same problem with my n915fy. It dont boot and when i try to get in recovery it just stuck on booting recovery.
Have anyone the files for me too? I bought the phone Bricked.
Edit: Things I already tried:
Installed stock 5.1.1 per odin
Installed 5.1.1 per odin while checked the mark Nand earse all
Installed 4.4.4 per odin
Installed CWM per odin
Still stuck on Samsung Galaxy booting logo, when i try to go in Recovery menu its calls: " Recover booting" but just restart after one minute.
Hope someone can help me...
Btw where can i get pitfiles and would it help when i patch one?
pubtemp said:
Thanks, I managed to use the pit file and it got pass the brick page.
However, now the system goes into the Samsung Galaxy Note Edge loading screen and just stays there for a very long time and then restarts itself again....I pulled the battery out to manual shutdown (power button will not shut it down) and tried to go into recovery mode, it says loading recovery, but ends up restarting back to the Samsung loading screen indefinitely again. I would assume that's because the rom is dead at this point, and I would need to go to dl mode and flash a new stock rom back in ? What is my next step ?
Click to expand...
Click to collapse
You know what, try to clean power button. It may sticks. Pull battery and put small drop of rubbing alcohol. Then press couple times ( with out battery). Let dry for 10 min( you may use hair dryer on low power) . Put battery back and let us know.
Sent from my SAMSUNG-SM-N920A using XDA Premium HD app
Hey, i having the same problem, i was wondering if someone could make a step by step guide on how to fix it. also mine says mmc: mmc_write fail.
When i did Nand erase it says
mmc: mmc_read fail
ERASING USERDATA PARTITION
My SM-N915A went full dead on incomplete upgrade. Tried everything possible no lights, no vibration, no nothing: fill dear brick.
Was told its emmc corrupt.
Kindly help
can't you use samsung kies?
Hi to all. I was trying to recover some files with DrFone when it tried to root my phone. The rooting process failed and the phone bricked. If I try to power it on, it appears the writing "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
Obviously kies can't connect to the phone.
If I press pwr+vol_dn+home and then select "volume up" the phone goes in download mode but doesn't accept the reset of drfone, the download process freeze at half...
What can I do?
Thanks in advance!
try flashing only pitt file
is there anyone that does this upload , reload repair for others. are is there instructions to follow somewhere?
ltindi32 said:
pit file with Odin 3.07 0 3.09 single and tell me how it went
Click to expand...
Click to collapse
thanks for the pit file,saved my n915a after encountering "DRK error" after the 6.0.1 update. Cheers
I am following "[Guide] Know your Device: Galaxy S Duos2 GT-S7582~Root~Odin~CWM~ROM LIST |2014.06.08|" this process to flash my device but its not working
please help
odin log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7582DDUANJ1_S7582ODDANJ1_S7582DDUANI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> BcmCP.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Can anybody tell me the problem how can i fix it
Flash the latest firmware from Odin ..u can download it from firmwarefile.com
Muscular droid said:
Flash the latest firmware from Odin ..u can download it from firmwarefile.com
Click to expand...
Click to collapse
I have already download the latest firmware from there.
Is there any other solution available for it then please help me out
rename the .tar.md5 file to .tar, open with winrar or anything that can read .tar and tell me if it having sboot.bin in there or not?
also your phone is s7580 or s7582?
sandpox said:
rename the .tar.md5 file to .tar, open with winrar or anything that can read .tar and tell me if it having sboot.bin in there or not?
also your phone is s7580 or s7582?
Click to expand...
Click to collapse
no it doesn't contain sboot.bin in there
i have attached the screenshot of the files in there
and my device is s7582
kishorprabhat said:
no it doesn't contain sboot.bin in there
i have attached the screenshot of the files in there
and my device is s7582
Click to expand...
Click to collapse
Looks like the last stock ROM which installed on your device is too old and its bootloader doesn't accept sign of new stock ROM, try to download another ROM but lower down in the list on samfirmware
sandpox said:
Looks like the last stock ROM which installed on your device is too old and its bootloader doesn't accept sign of new stock ROM, try to download another ROM but lower down in the list on samfirmware
Click to expand...
Click to collapse
okay trying with oldest one available on samfirmware
wait for my replay because free download service of samfrimware is under maintenance till 28 Nov so unable to download rom
kishorprabhat said:
okay trying with oldest one available on samfirmware
wait for my replay because free download service of samfrimware is under maintenance till 28 Nov so unable to download rom
Click to expand...
Click to collapse
http://updato.com/firmware-archive-select-model?q=gt-s7582
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7582DDUANJ1_S7582ODDANJ1_S7582DDUANI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> BcmCP.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> dt-blob
<ID:0/005> hidden.img
<ID:0/005> param.lfs
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
downloaded rom from the site you provided and it worked
thank you very much
Hello everyone.
I have a big problem i had root on my GT-S7582
On the other day the mobile phone hung up and when I went to call it it arrives the part of for the password and it restarts and it stays like this always and does not let to reset by keys somebody knows how to solve this problem? I've tried several things but it does not work.
Sorry for my english
(I'm from Portugal, Portugal phone)
SérgioVoid said:
Hello everyone.
I have a big problem i had root on my GT-S7582
On the other day the mobile phone hung up and when I went to call it it arrives the part of for the password and it restarts and it stays like this always and does not let to reset by keys somebody knows how to solve this problem? I've tried several things but it does not work.
Sorry for my english
(I'm from Portugal, Portugal phone)
Click to expand...
Click to collapse
You have to reset your phone, to do so turn it off, go to recovery(press power,home , vol up key simultaneously) then use vol key to move up down, select format or factory reset whatever is present there and then apply it.....it will fix your problem
Vishal Shrivastav said:
You have to reset your phone, to do so turn it off, go to recovery(press power,home , vol up key simultaneously) then use vol key to move up down, select format or factory reset whatever is present there and then apply it.....it will fix your problem
Click to expand...
Click to collapse
Hello.
I already did it wrong but when I go to restart it says error in big letters.
SérgioVoid said:
Hello.
I already did it wrong but when I go to restart it says error in big letters.
Click to expand...
Click to collapse
Then download odin and firmware from Google, put i in your computer, turn off your phone go to download mode(press power button,home key and volume down (not up ) key simultaneously)
Open Odin on computer select PIT/AP and locate firmware you just downloaded connect your phone through usb when it show [com 6 ] or something like that then press start, leave it till process complete, it will reboot in between the process, dont panic just wait till it say ok.....turn it on injoy, i hope you didn't installed any custom ROMs like cyanogen 12,13,14 etc. If you did, then you have to factory reset it as i mentioned earlier
Vishal Shrivastav said:
Then download odin and firmware from Google, put i in your computer, turn off your phone go to download mode(press power button,home key and volume down (not up ) key simultaneously)
Open Odin on computer select PIT/AP and locate firmware you just downloaded connect your phone through usb when it show [com 6 ] or something like that then press start, leave it till process complete, it will reboot in between the process, dont panic just wait till it say ok.....turn it on injoy, i hope you didn't installed any custom ROMs like cyanogen 12,13,14 etc. If you did, then you have to factory reset it as i mentioned earlier
Click to expand...
Click to collapse
OK thank you!
How can I find out what my original Firmaware is? And where can I find the PIT I could not find.
SérgioVoid said:
OK thank you!
How can I find out what my original Firmaware is? And where can I find the PIT I could not find.
Click to expand...
Click to collapse
http://www.samprix.com/samsung-galaxy-s-duos-2-gt-s7582-official-firmware-update/ you will find it here, just download the firmware for your contry,
Vishal Shrivastav said:
http://www.samprix.com/samsung-galaxy-s-duos-2-gt-s7582-official-firmware-update/ you will find it here, just download the firmware for your contry,
Click to expand...
Click to collapse
Did not work does not leave the part that says samsung
I do not know what else to do anymore.
Are you on stock ROM
Sent from my Intex Cloud Swift using XDA Labs
---------- Post added at 08:22 PM ---------- Previous post was at 08:20 PM ----------
Muscular droid said:
Are you on stock ROM
Click to expand...
Click to collapse
Try installing TWRP recovery and flash custom ROM !!!!
Sent from my Intex Cloud Swift using XDA Labs
Hi all,
Long story short, phone got water damage, left in rice for month, tried to boot and it shows Samsung logo and reboots.
Tried several things which I'll list below, never got anywhere and I'd throw the phone back in a drawer and then a few months later I'd take it out and give it another go
Already have replacement but was looking to hopefully get family photos off it (yes I backup everything now)
So i've tried the following different Odin versions:
3.09, 3.10.6 + 3.12.3
I've downloaded my firmware version G920IDVU3FQF5_G920IVNZ3FQF1_VNZ from SamMobile webite and flashed with that.
Still same issue.
After flashing firmware I have also tried the following different versions of TWRP:
twrp-2.8.6.0-zeroflte.img
twrp-2.8.6.1-zeroflte.img
twrp-2.8.6.2-zeroflte.img
twrp-3.1.1-0-zeroflte.img
Still same issue although I do get the red text "recovery is not seandroid enforcing" along side Samsung Logo but reboots as always.
If only I could get into Recovery I could then mount SD and hopefully get access to photos.
Also tried using ADB to push and pull but no go :silly:
Am I missing something stupid?
I do have the pit file for my model but I'm under the impression it re-partitions everything and I'm guessing that would lose all data so I haven't tried that.
Also tried Samsung Smart Switch but it doesn't find the phone as I can only get it in Download Mode.
Any help would be appreciated :good:
alicg said:
Hi all,
Long story short, phone got water damage, left in rice for month, tried to boot and it shows Samsung logo and reboots.
Tried several things which I'll list below, never got anywhere and I'd throw the phone back in a drawer and then a few months later I'd take it out and give it another go
Already have replacement but was looking to hopefully get family photos off it (yes I backup everything now)
So i've tried the following different Odin versions:
3.09, 3.10.6 + 3.12.3
I've downloaded my firmware version G920IDVU3FQF5_G920IVNZ3FQF1_VNZ from SamMobile webite and flashed with that.
Still same issue.
After flashing firmware I have also tried the following different versions of TWRP:
twrp-2.8.6.0-zeroflte.img
twrp-2.8.6.1-zeroflte.img
twrp-2.8.6.2-zeroflte.img
twrp-3.1.1-0-zeroflte.img
Still same issue although I do get the red text "recovery is not seandroid enforcing" along side Samsung Logo but reboots as always.
If only I could get into Recovery I could then mount SD and hopefully get access to photos.
Also tried using ADB to push and pull but no go :silly:
Am I missing something stupid?
I do have the pit file for my model but I'm under the impression it re-partitions everything and I'm guessing that would lose all data so I haven't tried that.
Also tried Samsung Smart Switch but it doesn't find the phone as I can only get it in Download Mode.
Any help would be appreciated :good:
Click to expand...
Click to collapse
Try to flash CF-Auto-Root via Odin then latest TWRP. If you get in TWRP you will be know what to do
rifek4 said:
Try to flash CF-Auto-Root via Odin then latest TWRP. If you get in TWRP you will be know what to do
Click to expand...
Click to collapse
Still no luck after CF-Auto-Root and then latest TWRP....
Tried to flash firmware again.
With Odin v3.10.6 - flashed G920IDVU3FQF5_G920IVNZ3FQF1_G920IDVU3FQF1_HOME.tar.md5
------
<OSM> G920IDVU3FQF5_G920IVNZ3FQF1_G920IDVU3FQF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
-------
Fails about 20% into system.img.
I'll try flashing with different versions of Odin and report back tomorrow! :good:
alicg said:
Still no luck after CF-Auto-Root and then latest TWRP....
Tried to flash firmware again.
With Odin v3.10.6 - flashed G920IDVU3FQF5_G920IVNZ3FQF1_G920IDVU3FQF1_HOME.tar.md5
------
<OSM> G920IDVU3FQF5_G920IVNZ3FQF1_G920IDVU3FQF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
-------
Fails about 20% into system.img.
I'll try flashing with different versions of Odin and report back tomorrow! :good:
Click to expand...
Click to collapse
HERE you got all. Try latest stock firmware which you get via SamFirm. But BTW I don't wish good future for that phone after swimming in water
Used Odin v3.12.7 and flashed latest firmware > CF-Auto-Root > latest TWRP
No difference....still only boots to download mode.
alicg said:
Used Odin v3.12.7 and flashed latest firmware > CF-Auto-Root > latest TWRP
No difference....still only boots to download mode.
Click to expand...
Click to collapse
Try to hold Volume - + Home + Power for 30 sec and when phone restart (when you see Samsung logo) directly switch from Volume - to Volume + but hold also another two buttons, you should get recovery menu.
rifek4 said:
Try to hold Volume - + Home + Power for 30 sec and when phone restart (when you see Samsung logo) directly switch from Volume - to Volume + but hold also another two buttons, you should get recovery menu.
Click to expand...
Click to collapse
Still no recovery, the phone doesn't hold a charge anymore so it could be a motherboard issue too.
Doesn't turn on at all if not plugged into charger or PC. As soon as I plug it in it shows Android logo and reboots instantly.
Holding Volume Up + Power + Home does nothing, phone just keeps rebooting.
Only when I hold Volume Down + Power + Home does it show the warning screen and I can then choose Volume Up to Continue or Down to Cancel and reboot.
Think I've reached the limit with this phone
alicg said:
Still no recovery, the phone doesn't hold a charge anymore so it could be a motherboard issue too.
Doesn't turn on at all if not plugged into charger or PC. As soon as I plug it in it shows Android logo and reboots instantly.
Holding Volume Up + Power + Home does nothing, phone just keeps rebooting.
Only when I hold Volume Down + Power + Home does it show the warning screen and I can then choose Volume Up to Continue or Down to Cancel and reboot.
Think I've reached the limit with this phone
Click to expand...
Click to collapse
You holded phone in rice for a month etc, but while phone were in water battery was still connected to mobo, and that could makes shocks on mobo and now something can be just burned. And every battery after contact with water will don't hold charge as should