Database Info

[Stock][ROM][Odin] Galaxy Y Pro GT-B5510 firmware packages

Flashable Firmware Packages for the Galaxy Y Pro GT-B5510 Enjoy !
Temporary if your phone is bricked: http://lmgtfy.com/?q=GT-B5510+Odin+firmware+download
you can find the firmware on google!
I will update this thread as soon as possible
GT-B5510 Odin firmware download

Tutorial:
1. Start ODIN
2. Turn of your phone so that to go to Download Mode. The download mode can be entered by pressing Volume down Key + OK button, and holding both simultaneously press the Power Button.
2. Choose PDA and select the downloaded File (SS_DL.dll not needed 'delete it')
3. Leave everything as it is and click 'Start'
4. On your phone follow instructions after flashing is complete
Odin download: Odin

Press thanks if it helped you Thanks in advance

fail!
Hi!
Thanks for the os!
I tried the tutorial above a couple of times but odin gets the following error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> B5510XXKJ2_B5510OXAKJ2_B5510XXKJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have a galaxy y pro gt-b5510.
android version 2.3.6
basehand version b5510xxkj2
kernel version [email protected] #16
build number gingerbread.xxkj2
i've entered in download mode, the display confirmed with:
odin mode
product name: gt-b5510
custom bin down: no(0 counts)
current bin: samsung official
Downloading...
do not turn off target!!
any suggestions?
thanks!

who pass?

djbasspower said:
Hi!
Thanks for the os!
I tried the tutorial above a couple of times but odin gets the following error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> B5510XXKJ2_B5510OXAKJ2_B5510XXKJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have a galaxy y pro gt-b5510.
android version 2.3.6
basehand version b5510xxkj2
kernel version [email protected] #16
build number gingerbread.xxkj2
i've entered in download mode, the display confirmed with:
odin mode
product name: gt-b5510
custom bin down: no(0 counts)
current bin: samsung official
Downloading...
do not turn off target!!
any suggestions?
thanks!
Click to expand...
Click to collapse
That's weird I got those form sammobile maybe that's the problem I think you need to use this tool in order to work: http://forum.xda-developers.com/showthread.php?t=1611225 I am sorry I tought these package were working but if no one passes then I need to remove this thread.
But anyway did you download my odin and followed my instructions 100%?
Also don't use PIT or tik anything else just do what I said in the tutorial

And sorry I added a line to tutorial forget to say that you need to enter download mode first but I think you did that ?

GianniDPC said:
Tutorial:
1. Start ODIN
2. Turn of your phone so that to go to Download Mode. The download mode can be entered by pressing Volume down Key + OK button, and holding both simultaneously press the Power Button.
2. Choose PDA and select the downloaded File (SS_DL.dll not needed 'delete it')
3. Leave everything as it is and click 'Start'
4. On your phone follow instructions after flashing is complete
Odin download: Odin
Click to expand...
Click to collapse
i did it exactly as above... fails to write every time
i tried with every usb port i have but it doesn't work...

djbasspower said:
i did it exactly as above... fails to write every time
i tried with every usb port i have but it doesn't work...
Click to expand...
Click to collapse
Ok do you have KIES installed if not Install it (Maybe reinstall it)
Make sure KIES is closed when ODIN is opened (another thing I recommend to do is go to recovery on your phone and wipe data factory reset and wipe cache) Then try again

Hi, i just bought a new Galaxy y pro.
I'm Italian and my current fimware is XXKJ4 ...
I want update it but kies doesn't find my phone, i try to reinstall kies, with another PC but is the same...
What is the lastest or the best firmware for this phone?
Also, when i try to flash with Odin, give me a FAIL
Please, help me ! thanks

I have the answer for the problem!
Ok everybody these firmwares are no ready to use with ODIN, that's the problem. You need to convert these KIES firmware to ODIN ready to flash files with Doky73's tool --> SplitFUS2 or request him the firmware in this threat.
And please don't forget to say thanks to Doky and me

Which ROM to use for a B5510 bought in Czech Republic?

djbasspower said:
Hi!
Thanks for the os!
I tried the tutorial above a couple of times but odin gets the following error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> B5510XXKJ2_B5510OXAKJ2_B5510XXKJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have a galaxy y pro gt-b5510.
android version 2.3.6
basehand version b5510xxkj2
kernel version [email protected] #16
build number gingerbread.xxkj2
i've entered in download mode, the display confirmed with:
odin mode
product name: gt-b5510
custom bin down: no(0 counts)
current bin: samsung official
Downloading...
do not turn off target!!
any suggestions?
thanks!
Click to expand...
Click to collapse
I ran into this thread and tried the same thing. After much searching, I found references to this thread and/or this tool to use. It looks like the problem with this firmware is it is all in one package, and needs to be split. See the links below:
http://forum.xda-developers.com/showthread.php?p=26251171 - look at reply #6
http://fahmi1597.blogspot.com/2012/08/android-how-to-split-onepackage.html - how to split a .tar.md5 file into the subpackages, if it is all in one.
---------- Post added at 01:02 AM ---------- Previous post was at 12:29 AM ----------
pshaww said:
I ran into this thread and tried the same thing. After much searching, I found references to this thread and/or this tool to use. It looks like the problem with this firmware is it is all in one package, and needs to be split. See the links below:
http://forum.xda-developers.com/showthread.php?p=26251171 - look at reply #6
http://fahmi1597.blogspot.com/2012/08/android-how-to-split-onepackage.html - how to split a .tar.md5 file into the subpackages, if it is all in one.
Click to expand...
Click to collapse
I can confirm it works fine using Odinatrix (from the second link above. I used the firmware mentioned in this thread. (by the way, the OP didn't mention it is password protected - password is 'android'). I let Odinatrix split up the firmware - super easy to use, just follow the instructions in the second link above.
I then flashed CSC, MODEM, and PDA - nothing else. I didn't repartition - just left at auto reboot and f. reset time. Now flashed fine and is restarting.

AN ADVICE
Hello sir...maybe your tutorial will be better if you can give us some photos/ScreenShots of flashing steps...
:highfive:

aligh9 said:
Thanks a lot
This is what you wanted:
PDA: B5510JPLI1
PHONE: B5510XXLH3
CSC: B5510OJPLF1
Sent from my GT-B5510 using Tapatalk 2
Click to expand...
Click to collapse
@OP.. I am asking in place of him as he still doesnt have 10 posts to post here.. Can you please kindly upload U.A.E firmware B5510OJPLF1 which is available in samfirmware.com.. Thank you..

Sorry, but rom with Italian language ?

These firmwares are not flashable with Odin (Gives you an error) search the Internet for the right packages (you should succeed I fixed a friend his Galaxy Y Pro with that)
EDIT: I will try to update this thread even if I have a Xperia Mini now.

why is this in s5360 thread? :laugh:

zenxus31 said:
why is this in s5360 thread? :laugh:
Click to expand...
Click to collapse
well, you can report it..
Its in sgy section because all variants of sgy like duos , pro duos, pro come under sgy section.. so.. I guess it can be moved to duos development section.. but no harm if its here..
____________________________________
“If you wait to do everything until you’re sure it’s right, you’ll probably never do much of anything.” –Win Borden

i Tried flashing My galaxy Y pro with ODIN but it keeps Stucking i recovery img all the time, tried different ports and only 1 worked
is there any help ?

[Q] Root attempt gone wrong

Hi All,
I've attempted to root my SM-900, using Odin 3.09 and followed all the usual steps.
Suddenly I got different coloured horizontal lines on screen and that probably means my attemp didn't go that well...
I've read I should go back to the original firmware using kies, and then try again.
So how do I restore the original firmware?
I have an image (.img) and understand I need samsung Kies.
Question: Do I use Kies or the new KIES3?
How to go from there?
Or is there another way to restore the firmware?
Thanks in advance!

I figured it out already....
I un-tar-red the recovery file. Leaving it as .tar solved the issue.

bricked
my tablet is stuck,tried different usb ports,different odins,different cables .gets stuck on set up connection,now all i get on screen is FIRMWARE UPGRADE ENCOUNTERED AN ISSUE

wolverinex66 said:
my tablet is stuck,tried different usb ports,different odins,different cables .gets stuck on set up connection,now all i get on screen is FIRMWARE UPGRADE ENCOUNTERED AN ISSUE
Click to expand...
Click to collapse
Please describe what is showing on tab's screen
Sent from my GT-S7562 using XDA Premium 4 mobile app

fixed
I was able to flash the stock recovery thanks

Had the same issues. Solved it by reinstalling the USB drivers. Via Kies 3, under the Tools menu. Worked perfectly after that. (Edit. ...for CFautoroot)
Sent from my SM-P900 using Tapatalk

Man that's gotta be a scary moment...
Sent from my SM-P900 using Tapatalk

Need advice
Frank_H said:
I figured it out already....
I un-tar-red the recovery file. Leaving it as .tar solved the issue.
Click to expand...
Click to collapse
I have the same problem... root failed with several colored line. and doesnt start anymore.
Can you explain to me what do you mean by "I un-tar-red the recovery file. Leaving it as .tar solved the issue." ?
Thank you

wilsto said:
I have the same problem... root failed with several colored line. and doesnt start anymore.
Can you explain to me what do you mean by "I un-tar-red the recovery file. Leaving it as .tar solved the issue." ?
Thank
Since the recovery image was downloaded as aan .tar file, which is a container file like .zip or.7z, I thought that I needed to unzip it.
You can mount the .tar file in Odin as it is, without unzipping it first.
You can find the recovery download location in the CF-root thread.
Click to expand...
Click to collapse

wilsto said:
I have the same problem... root failed with several colored line. and doesnt start anymore.
Can you explain to me what do you mean by "I un-tar-red the recovery file. Leaving it as .tar solved the issue." ?
Thank you
Click to expand...
Click to collapse
Mine did that after flashing a different firmware and trying to root. I solved it by first flashing the stock recovery in chainfires thread then rooting.
Sent from my SCH-I605 using XDA Premium 4 mobile app

Duly.noted said:
Mine did that after flashing a different firmware and trying to root. I solved it by first flashing the stock recovery in chainfires thread then rooting.
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yep me too..

I'm having this same problem. I downloaded CF-Auto-Root-v1awifi-v1awifixx-smp900.zip from download.chainfire.eu. I extracted the zip file, leaving me with a tar.md5 file. I try to flash that file, and end up with multicolor bars across the screen, exactly like if the video card dies on a mobile.
Here's what Odin has output as of when the error occurs. It flashes up a big red failed in the upper left box.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
So I flashed the original recovery from http://forum.xda-developers.com/showpost.php?p=50492301&postcount=234 and got a working but unrooted tablet. And I flashed CF with both 3.09 and 3.07, with a flash back to stock before each. Same thing every time-picture of a dying video card, except display is fine once flashed back to stock. Pic of the display added, on the off chance it helps.

Install Kies 3, then go into the Tools menu and reinstall the USB drivers. Reboot. Try auto root again. Should work on the first try.
Sent from my SM-P900 using Tapatalk

dodo99x said:
Install Kies 3, then go into the Tools menu and reinstall the USB drivers. Reboot. Try auto root again. Should work on the first try.
Sent from my SM-P900 using Tapatalk
Click to expand...
Click to collapse
I am having the same issue tried different computer with xp same result. Did you ever get it working or no? and if you did get working how?
---------- Post added at 08:39 AM ---------- Previous post was at 08:35 AM ----------
heldc said:
I'm having this same problem. I downloaded CF-Auto-Root-v1awifi-v1awifixx-smp900.zip from download.chainfire.eu. I extracted the zip file, leaving me with a tar.md5 file. I try to flash that file, and end up with multicolor bars across the screen, exactly like if the video card dies on a mobile.
Here's what Odin has output as of when the error occurs. It flashes up a big red failed in the upper left box.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
So I flashed the original recovery from http://forum.xda-developers.com/showpost.php?p=50492301&postcount=234 and got a working but unrooted tablet. And I flashed CF with both 3.09 and 3.07, with a flash back to stock before each. Same thing every time-picture of a dying video card, except display is fine once flashed back to stock. Pic of the display added, on the off chance it helps.
Click to expand...
Click to collapse
I am having the same issue tried different computer with xp same result. Did you ever get it working or no? and if you did get working how?

paulskerr said:
I am having the same issue tried different computer with xp same result. Did you ever get it working or no? and if you did get working how?
Click to expand...
Click to collapse
I did. I did the uninstaller for the USB drivers several times, with no luck. So finally I just deleted the Samsung folders in program files and program files x86. I did not reinstall Kies, just the USB drivers from samsung.com. I used odin 3.09, and it went flawlessly. Well, mostly-wifi took a *long* time to reconnect the first time after boot, but I'd also installed the update just before rooting, so dunno if it was the rooting or the update.

heldc said:
I did. I did the uninstaller for the USB drivers several times, with no luck. So finally I just deleted the Samsung folders in program files and program files x86. I did not reinstall Kies, just the USB drivers from samsung.com. I used odin 3.09, and it went flawlessly. Well, mostly-wifi took a *long* time to reconnect the first time after boot, but I'd also installed the update just before rooting, so dunno if it was the rooting or the update.
Click to expand...
Click to collapse
I finally go also. I did exactly what you did. Thank you

Frank_H said:
Hi All,
I have an image (.img) and understand I need samsung Kies.
Click to expand...
Click to collapse
Where do I get this image?

How many are remembering to unhide developer options and then select usb debugging? The moment I did that everything worked

Whwre did you find the USB drivers on samsung.com? When selecting the SM-P900 it does not offer any for download.

heldc said:
I'm having this same problem. I downloaded CF-Auto-Root-v1awifi-v1awifixx-smp900.zip from download.chainfire.eu. I extracted the zip file, leaving me with a tar.md5 file. I try to flash that file, and end up with multicolor bars across the screen, exactly like if the video card dies on a mobile.
Here's what Odin has output as of when the error occurs. It flashes up a big red failed in the upper left box.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
So I flashed the original recovery from http://forum.xda-developers.com/showpost.php?p=50492301&postcount=234 and got a working but unrooted tablet. And I flashed CF with both 3.09 and 3.07, with a flash back to stock before each. Same thing every time-picture of a dying video card, except display is fine once flashed back to stock. Pic of the display added, on the off chance it helps.
Click to expand...
Click to collapse
So this happened to me, and this is my first time rooting. I have the tar file for recovery. How do I proceed? I haven't unplugged my note pro, can I just put in the new file in the pda and start, or do I need to restart odin? Really kind of worried...

[Q] Samsung says our GT-P3113 is "dead." Is it?

Son was playing Words With Friends and this Samsung Galaxy Tab 2 7" GT-P3113 was acting up. Only other recent change was my wife downloaded a Southern Living magazine. The screen went dark blue like it was on but not responsive.
None of the lengthy holding down the Power or Power and Volume Up would ever produce a reboot, only a battery symbol. I did get it into the load an alternate OS screen, but didn't try it.
Took into a Samsung Experience desk at Best Buy and they said it was DEAD. Apologized that this year and a half old unit was done and said that was "probably not what we were expecting as far as lifespan of the unit." Ya think????
Came home, as a complete noob with nothing to lose and downloaded Odin and the files to try and load the recovery. Odin recognized the device and tried to start installing but got to the first step and FAILED. Something about NAND.
So in your opinion is this completely dead or maybe I don't have the right files? If you have current links to the right files please point them out to me. I've spent tons of times find links that are dead.
Thanks!

dailyvideo said:
Son was playing Words With Friends and this Samsung Galaxy Tab 2 7" GT-P3113 was acting up. Only other recent change was my wife downloaded a Southern Living magazine. The screen went dark blue like it was on but not responsive.
None of the lengthy holding down the Power or Power and Volume Up would ever produce a reboot, only a battery symbol. I did get it into the load an alternate OS screen, but didn't try it.
Took into a Samsung Experience desk at Best Buy and they said it was DEAD. Apologized that this year and a half old unit was done and said that was "probably not what we were expecting as far as lifespan of the unit." Ya think????
Came home, as a complete noob with nothing to lose and downloaded Odin and the files to try and load the recovery. Odin recognized the device and tried to start installing but got to the first step and FAILED. Something about NAND.
So in your opinion is this completely dead or maybe I don't have the right files? If you have current links to the right files please point them out to me. I've spent tons of times find links that are dead.
Thanks!
Click to expand...
Click to collapse
Does it mean you could reach the download mode? That would mean your Tab is not "dead".... (what kind of guy was that in the service?)
Try to see if you can get into the recovery mode (keep pressed power button & volume up and after Samsung logo appears second time, release the power button and keep the other one still pressed for about 5sec). If you get there, make factory reset and reboot. This will wipe your data....
Or if you can access download mode (power & volume down) turn it on again and download some recent firmware from www.sammobile.com exactly for your Tab model. In such case, reply my post and I will write you how to flash it with Odin.

No logo for reboot, which sammobile files?
tetakpatak said:
Does it mean you could reach the download mode? That would mean your Tab is not "dead".... (what kind of guy was that in the service?)
Try to see if you can get into the recovery mode (keep pressed power button & volume up and after Samsung logo appears second time, release the power button and keep the other one still pressed for about 5sec). If you get there, make factory reset and reboot. This will wipe your data....
Or if you can access download mode (power & volume down) turn it on again and download some recent firmware from sammobile exactly for your Tab model. In such case, reply my post and I will write you how to flash it with Odin.
Click to expand...
Click to collapse
Tetakpatak,
Thanks for jumping in!!!
1. That's the thing. We can never get the unit itself to the logo screen using that method, only the battery screen with a little sunshine symbol inside of it and only when the unit is plugged in.
2. I found sammobile before but my search for GT-P3113 produces only Cellular South files. This is a wifi tab only without a carrier. Does that make a difference? Can I use any of the listed files? Should I try each one?
Thanks!!!

No luck with sammobile files yet
tetakpatak said:
Does it mean you could reach the download mode? That would mean your Tab is not "dead".... (what kind of guy was that in the service?)
Try to see if you can get into the recovery mode (keep pressed power button & volume up and after Samsung logo appears second time, release the power button and keep the other one still pressed for about 5sec). If you get there, make factory reset and reboot. This will wipe your data....
Or if you can access download mode (power & volume down) turn it on again and download some recent firmware from sammobile exactly for your Tab model. In such case, reply my post and I will write you how to flash it with Odin.
Click to expand...
Click to collapse
tetakpatak, thanks for your help! please see my other reply.
i went ahead and tried one of the sammobile files. guessing as to which one because this is a wifi not cellular tab. when i ran it i got...
>Firmware update start
>SingleDownload
>boot.img
>NAND Write Start!!
>FAIL!
>
>Complete(Write) operation failed.
>All threads completed. (succeed 0 / failed 1)
Does this mean it is completely dead or do I need to keep trying files from sammobile?
Thanks!!!

dailyvideo said:
tetakpatak, thanks for your help! please see my other reply.
i went ahead and tried one of the sammobile files. guessing as to which one because this is a wifi not cellular tab. when i ran it i got...
>Firmware update start
>SingleDownload
>boot.img
>NAND Write Start!!
>FAIL!
>
>Complete(Write) operation failed.
>All threads completed. (succeed 0 / failed 1)
Does this mean it is completely dead or do I need to keep trying files from sammobile?
Thanks!!!
Click to expand...
Click to collapse
Hmmm, it isn't definitely dead, of course. That guy in the service was anyway bit dumb IMO.
With JTAG, man of skills can repair any device, no matter how hard bricked.
Actually to get further, it would help to know if you can reach download mode or recovery mode?

Tried two more from sammobile
tetakpatak said:
Does it mean you could reach the download mode? That would mean your Tab is not "dead".... (what kind of guy was that in the service?)
Try to see if you can get into the recovery mode (keep pressed power button & volume up and after Samsung logo appears second time, release the power button and keep the other one still pressed for about 5sec). If you get there, make factory reset and reboot. This will wipe your data....
Or if you can access download mode (power & volume down) turn it on again and download some recent firmware from sammobile exactly for your Tab model. In such case, reply my post and I will write you how to flash it with Odin.
Click to expand...
Click to collapse
Tetakpatak,
Tried two more from sammobile and both failed. Once mentioned NAND and the other did not. I see there is a NAND Erase option in Odin. Is that something I should be checking before Starting?
Not sure what else to do.
Thanks.

Reply
tetakpatak said:
Hmmm, it isn't definitely dead, of course. That guy in the service was anyway bit dumb IMO.
With JTAG, man of skills can repair any device, no matter how hard bricked.
Actually to get further, it would help to know if you can reach download mode or recovery mode?
Click to expand...
Click to collapse
Sure, I can hold Power and Volume Down to get to the screen to load a custom OS.
I'm
1. Opening Odin
2. Loading in the file from sammobile in the AP field
3. Leaving Auto Reboot and F, Reset Time checked.
4. Letting Odin check the validity of the sammobile file
5. Then plugging in the GT-P3113 and hitting Start in Odin
Thanks.

dailyvideo said:
Sure, I can hold Power and Volume Down to get to the screen to load a custom OS.
I'm
1. Opening Odin
2. Loading in the file from sammobile in the AP field
3. Leaving Auto Reboot and F, Reset Time checked.
4. Letting Odin check the validity of the sammobile file
5. Then plugging in the GT-P3113 and hitting Start in Odin
Thanks.
Click to expand...
Click to collapse
OK, @dailyvideo don't flash any P3110 build because the bootloaders differ in something!!
I have got meanwhile for you download links of an excellent stock UEUCMK3 firmware for your P3113 click HERE or you can also download it HERE
Now your flashing checklist:
use entirely Odin v1.85 or 3.04
run Odin as administrator
choose any stock firmware for your Tab and download (you probably did already), unzip it and you will get one tar-md5 file
tap in Odin on PDA, choose that extracted single tar.md5 file
run now (not before) your Tab into download mode
connect it with USB cable
Odin must display "Added" in status bar, left on the bottom
Odin must also display ID:COM port numer above it
If both there, click on "START"
Good luck!

Didn't work
I was using Odin 3.09 so I went back to 3.04 per your suggestion. I tried UEUCMK3 firmware I had already downloaded. Still didn't work...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_XAR_P3113UEUCMK3_1978026_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Suppose I could try to use the firmware link you provided in case it is different. It's still downloading. Any other thoughts?
Thanks so much for your help.

dailyvideo said:
I was using Odin 3.09 so I went back to 3.04 per your suggestion. I tried UEUCMK3 firmware I had already downloaded. Still didn't work...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_XAR_P3113UEUCMK3_1978026_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Suppose I could try to use the firmware link you provided in case it is different. It's still downloading. Any other thoughts?
Thanks so much for your help.
Click to expand...
Click to collapse
NAND is vital part of the device, IDK if it has to do with the bootloader. We might need a developer's advice, @Android-Andi, what do you think- can we help this poor mate?

Still trying
Ran again with your firmware and got the same results...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_XAR_P3113UEUCMK3_1978026_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

I tought I just wrote back....? My post is gone...
NAND is vital part of the device, may consist bootloader or some other really important things.... IDK exactly, we might need a developer's advice here. @Android-Andi what do you say about this problem?

Thanks, next?
tetakpatak said:
I tought I just wrote back....? My post is gone...
NAND is vital part of the device, may consist bootloader or some other really important things.... IDK exactly, we might need a developer's advice here. @Android-Andi what do you say about this problem?
Click to expand...
Click to collapse
Tetapatak, Thanks for all your attempts to help! Super appreciate that.
Did you need me to reach out to @Android-Andi or did you post do that automatically?
I saw another post where someone did a partition and then came back and did your procedure and it worked but it wasn't for a GT-P3113. Not sure if that would work. I won't try it unless directed to.
Thanks.

dailyvideo said:
Tetapatak, Thanks for all your attempts to help! Super appreciate that.
Did you need me to reach out to @Android-Andi or did you post do that automatically?
I saw another post where someone did a partition and then came back and did your procedure and it worked but it wasn't for a GT-P3113. Not sure if that would work. I won't try it unless directed to.
Thanks.
Click to expand...
Click to collapse
He will see our mentioning and check this as soon as he can (he works now).
Try to google a bit about NAND partition, don't panic and have bit of patience, we will try to solve it.
Service can solve it for sure (not the dumb guy you've talked to )

Will wait
tetakpatak said:
He will see our mentioning and check this as soon as he can (he works now).
Try to google a bit about NAND partition, don't panic and have bit of patience, we will try to solve it.
Service can solve it for sure (not the dumb guy you've talked to )
Click to expand...
Click to collapse
Thanks will wait to hear back from you guys. Really can't tell you how thankful I am.
To the guy's credit at the Samsung Experience desk at Best Buy he couldn't get the OS screen to come up. I have trouble with it too at times unless there is enough of a charge. He said if he could get it to a certain point he could drill in and work with the code and really wanted to. I think because he could get to the OS screen he just assumed it was dead. To his credit too his dad died within 48 hours of our visit to the store.
Looking forward to the wizard advice.

dailyvideo said:
Tetapatak, Thanks for all your attempts to help! Super appreciate that.
Did you need me to reach out to @Android-Andi or did you post do that automatically?
I saw another post where someone did a partition and then came back and did your procedure and it worked but it wasn't for a GT-P3113. Not sure if that would work. I won't try it unless directed to.
Thanks.
Click to expand...
Click to collapse
Can you give this firmware a shot ?
http://terafile.co/82942a5b4d57/P3113UEUCMK3_P3113XARCMK3_XAR.zip
and one more mirror link if download speed is slow from above URL :
http://rapidgator.net/file/ec20cf98f5f712958760fd2b0457f939
But please make sure only Auto-reboot and Reset time are checked inside odin.......

No luck with new firware
Thanks lokesh, but still no luck. Here were the results...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_XAR_P3113UEUCMK3_1978026_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

dailyvideo said:
Thanks lokesh, but still no luck. Here were the results...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_XAR_P3113UEUCMK3_1978026_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Brother, Try using this .pit file that i am gonno share :
https://www.dropbox.com/s/wvn09tw1780irei/gt-p3110.pit
click on PDA in Odin and navigate to .pit file you have downloaded.
Now select the firmware you have downloaded as PDA and make sure only reboot option,,Repartition and reset time are checked.
Try this and give me a feedback soon.

Clarifying
lokesh.3440 said:
Brother, Try using this .pit file that i am gonno share :
https://www.dropbox.com/s/wvn09tw1780irei/gt-p3110.pit
click on PDA in Odin and navigate to .pit file you have downloaded.
Now select the firmware you have downloaded as PDA and make sure only reboot option,,Repartition and reset time are checked.
Try this and give me a feedback soon.
Click to expand...
Click to collapse
Lokesh,
Thanks for hanging in there with me. Just to clarify. Are you saying load your .pit file with the PIT button because when I click PDA to try and load that a .pit is not a valid extension.
Also, are you saying to load the .pit with PIT and the .md5 file with PDA ans Start with the Auto Reboot, Re-Partition, and F. Reset Time Options checked?
Just making sure I have all this right.
Thanks.

dailyvideo said:
Lokesh,
Thanks for hanging in there with me. Just to clarify. Are you saying load your .pit file with the PIT button because when I click PDA to try and load that a .pit is not a valid extension.
Also, are you saying to load the .pit with PIT and the .md5 file with PDA ans Start with the Auto Reboot, Re-Partition, and F. Reset Time Options checked?
Just making sure I have all this right.
Thanks.
Click to expand...
Click to collapse
You should choose in Odin just like last time: firmware under PDA. In addition, also choose PIT file under PIT. The PIT file will ensure your system partitions will be set properly.
If this also fails, it is possible that your internal memory is maybe corrupted and nothing can be written on the card.

[Q] Need help flashing a Samsung Galaxy S5 G900F

Hy guys.
I need help to flash my Samsung SM-G900F. I've downloaded an official Rom and I tried to to flash it whit Odin v3.09, but every time i get the same error at the end of the process and my phone display's the same message: "Some thing went wrong. Please connect to Keis " or something like that. Android vresion: G900FXX1ANG8. And another strange thing is that I can't enter the Recovery Mode, when I press volume up+power+home nothing happens. Please help me flash an official rom.

AlexTavi86 said:
Hy guys.
I need help to flash my Samsung SM-G900F. I've downloaded an official Rom and I tried to to flash it whit Odin v3.09, but every time i get the same error at the end of the process and my phone display's the same message: "Some thing went wrong. Please connect to Keis " or something like that. Android vresion: G900FXX1ANG8. And another strange thing is that I can't enter the Recovery Mode, when I press volume up+power+home nothing happens. Please help me flash an official rom.
Click to expand...
Click to collapse
so you are still able to get into download mode? also give us a picture of what ODIN says, you should try to connect it to kies which would install stock rom itself for you, ODIN is basically already inside kies and we ripped it from it.

Trozzul said:
so you are still able to get into download mode? also give us a picture of what ODIN says, you should try to connect it to kies which would install stock rom itself for you, ODIN is basically already inside kies and we ripped it from it.
Click to expand...
Click to collapse
Yes, I can still acces the dowload mode. Odin fails at the end of flashing after writing the modem the box at the top turns red and FAIL appear. The phone remains in download mode, and when I try to start it shows this message “Firmware Upgrade Encountered an Issue”

AlexTavi86 said:
Yes, I can still acces the dowload mode. Odin fails at the end of flashing after writing the modem the box at the top turns red and FAIL appear. The phone remains in download mode, and when I try to start it shows this message “Firmware Upgrade Encountered an Issue”
Click to expand...
Click to collapse
“Firmware Upgrade Encountered an Issue” yeah i would try to use kies then, are you sure you are using the correct firmware for your model? where did you get the firmware? i would recommend sammobile.com

Trozzul said:
“Firmware Upgrade Encountered an Issue” yeah i would try to use kies then, are you sure you are using the correct firmware for your model? where did you get the firmware? i would recommend sammobile.com
Click to expand...
Click to collapse
I tried Keis but it doesn't work. I have two software's one from sammobile and one from samsung-updates but it gives the same error.

AlexTavi86 said:
I tried Keis but it doesn't work. I have two software's one from sammobile and one from samsung-updates but it gives the same error.
Click to expand...
Click to collapse
can you tell me exactly what odin says in the little text box? copy paste please.

Trozzul said:
can you tell me exactly what odin says in the little text box? copy paste please.
Click to expand...
Click to collapse
I will try again and post here all the text.

Trozzul said:
can you tell me exactly what odin says in the little text box? copy paste please.
Click to expand...
Click to collapse
I can't post images. But here is the text form Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANH6_G900FPHN1ANH1_G900FXXU1ANG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

deepfreez86 said:
I can't post images. But here is the text form Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANH6_G900FPHN1ANH1_G900FXXU1ANG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I get exacly the same problem.

@AlexTavi86 @deepfreez86 do you both remember the last Offical version of samsung firmware you had? (Android version) and the custom rom android version you had before? i need to know them both. also what version of windows? windows 8 might be the problem if thats whats up.

Trozzul said:
@AlexTavi86 @deepfreez86 do you both remember the last Offical version of samsung firmware you had? (Android version) and the custom rom android version you had before? i need to know them both. also what version of windows? windows 8 might be the problem if thats whats up.
Click to expand...
Click to collapse
Windows 7 x64
Android version: G900FXX1ANG8

AlexTavi86 said:
Windows 7 x64
Android version: G900FXX1ANG8
Click to expand...
Click to collapse
i meant the android version like :Kit kat 4.4. or 4.4.2/4.4.3/4.4.4, but i did try to search up G900FXX1ANG8 on sammobile and i didn't see any firmware with that name, i think you might be flashing the wrong firmware. can you pop the battery and tell me what the model number there?

Trozzul said:
i meant the android version like :Kit kat 4.4. or 4.4.2/4.4.3/4.4.4, but i did try to search up G900FXX1ANG8 on sammobile and i didn't see any firmware with that name, i think you might be flashing the wrong firmware. can you pop the battery and tell me what the model number there?
Click to expand...
Click to collapse
SM-G900F is the model number

G900F official firmware
AlexTavi86 said:
SM-G900F is the model number
Click to expand...
Click to collapse
Curious, what is your phone's country of origin (and service provider).
This can help identify the correct firmware.

r35gtr said:
Curious, what is your phone's country of origin (and service provider).
This can help identify the correct firmware.
Click to expand...
Click to collapse
I bought the phone from Spain an now i'm using it in Romania and the carrier is Orange Romania. When i tryed to reset ot from settings it remained stuck a boot loop.

Can't restore note 5 to stock

I am trying to restore my phone to stock because only stock modified rom works with VR, but doesn't play nice with android wear.
So back to stock I go, however when I put it in download mode load up AP with the file, and hit start it says "FAIL!" I have team win installed and that is how I get to download mode. I only had Auto Reboot and F. Reset time selected as well.
Can anyone advise me on what I may be doing wrong?
Here is the log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!

Download the stock firmware again the one you're using might be corrupt, also make sure drivers are installed

I have the drivers installed, also tried 2 firmwares, trying one more now.
Was following this guide:
http://www.droidviews.com/restore-t-mobile-galaxy-note-5-sm-n920t-to-stock-5-1-1-lollipop-firmware/

no firmware seems to be working. I also tried a new cable and a few ports. No change.

tried a different odin, got a bit further but ran into the get PIT for mapping...
Seriously, whoever can get me back to stock, i'll send a paypal donation to say thanks.

Are you using 3.10.7?

I experienced the same problem. I was rooted, running whatever custom ROM my heart desired, but unable to flash to stock....until I tried one too many times and had a soft brick. After some research I found I needed a PAC file. You can get it here: http://dl.samfirm.net/page/2. There's not too much to say. Each segment is loaded seperately and take your time. If this works for you I'm happy for you and want nothing more than to help a fellow traveler.

Drachnem said:
tried a different odin, got a bit further but ran into the get PIT for mapping...
Seriously, whoever can get me back to stock, i'll send a paypal donation to say thanks.
Click to expand...
Click to collapse
How are you entering download mode?
Sent from my SM-N920T using Tapatalk

I've done it by using teamwin, also by holding pwr + home + volume down

guaneet said:
Are you using 3.10.7?
Click to expand...
Click to collapse
tried two...3.10.6, and 3.10.7

audscott said:
I experienced the same problem. I was rooted, running whatever custom ROM my heart desired, but unable to flash to stock....until I tried one too many times and had a soft brick. After some research I found I needed a PAC file. You can get it here: http://dl.samfirm.net/page/2. There's not too much to say. Each segment is loaded seperately and take your time. If this works for you I'm happy for you and want nothing more than to help a fellow traveler.
Click to expand...
Click to collapse
You have to pay 10.00 to download the files

Drachnem said:
You have to pay 10.00 to download the files
Click to expand...
Click to collapse
Last time I checked you donated if you wanted, not forced to

Drachnem said:
Last time I checked you donated if you wanted, not forced to
Click to expand...
Click to collapse
Donated to try this fix, hope it works...

Drachnem said:
You have to pay 10.00 to download the files
Click to expand...
Click to collapse
As I recollect the fee is for the latest PAC, the others are free.

So it got further with the files and the pit file, but it didn't seem to fully work and I want to understand what may be wrong. It said failed in the first box but continued then the next box said pass.
The phone is now booted in setup mode but I wanted to understand what i may run into with this error or if I am fine...
Here is the log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_TMB_N920TUVS2COKC_N920TTMB2COKC_CL5966591_QB7480468_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:1/004> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:1/004> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:1/004> File analysis..
<ID:1/004> SetupConnection..
<ID:0/005> SetupConnection..
<ID:1/004> Initialzation..
<ID:1/004> Set PIT file..
<ID:1/004> DO NOT TURN OFF TARGET!!
<ID:1/004> Get PIT for mapping..
<ID:1/004> Firmware update start..
<ID:1/004> SingleDownload.
<ID:1/004> sboot.bin
<ID:1/004> NAND Write Start!!
<ID:1/004> param.bin
<ID:1/004> cm.bin
<ID:1/004> boot.img
<ID:1/004> recovery.img
<ID:1/004> system.img
<ID:0/005> Can't open the serial(COM) port.
<ID:1/004> modem.bin
<ID:1/004> cache.img
<ID:1/004> RQT_CLOSE !!
<ID:1/004> RES OK !!
<ID:1/004> Removed!!
<ID:1/004> Remain Port .... 1
<OSM> All threads completed. (succeed 1 / failed 1)

audscott said:
I experienced the same problem. I was rooted, running whatever custom ROM my heart desired, but unable to flash to stock....until I tried one too many times and had a soft brick. After some research I found I needed a PAC file. You can get it here: http://dl.samfirm.net/page/2. There's not too much to say. Each segment is loaded seperately and take your time. If this works for you I'm happy for you and want nothing more than to help a fellow traveler.
Click to expand...
Click to collapse
These files did end up working out, ran pit first then the other file. Gave me an error but seems to be working fine for now.
Thanks again.

Drachnem said:
These files did end up working out, ran pit first then the other file. Gave me an error but seems to be working fine for now.
Thanks again.
Click to expand...
Click to collapse
I don't often have an answer, but after being the benefactor of the knowledge and kindness of others through the years, I'm glad to help when I can.

Drachnem said:
I've done it by using teamwin, also by holding pwr + home + volume down
Click to expand...
Click to collapse
That's the problem you are using twrp enter download mode by volume up+pwr+home
Sent from my SM-N920T using Tapatalk

Drachnem said:
These files did end up working out, ran pit first then the other file. Gave me an error but seems to be working fine for now.
Thanks again.
Click to expand...
Click to collapse
Are you able to post the files here (if that doesn't violate an XDA rule)? Trying to get the old ones and they seems to be gone and really don't want to have to pay, but I guess I will if I have to.

Hey Guys,
Having an issue getting one of my Galaxy Note 5 (SM-N920T) back to stock. I am able to flash stock firmware in Odin 3.10.7 but the phone is bricked. When I flash any stock firmware the phone reboots and is stuck at the Note 5 Splash Screen. If i reboot into recovery and try to do the factory wipe it tells me it can't find "E:" and fails. Only way I can get the phone to boot is if I flash a rooted kernel. Then I noticed it says the Baseband is unknown in settings. I was going to try flashing through ADB but it tells me ADB is disabled, same with flashing from external storage. I cant even get it to reboot into bootloader. I am starting to think the phone needs IMEI repair..