Database Info

[S5301][GUIDE]how to root the Galaxy Pocket Plus S5301

Hi Evryone.
Until somebody will release CWM Recovery or any root method for the galaxy pocket plus, I managed to create a pre-rooted firmware.
This firmware base on the last build for S5301, is a full firmware exactly like the original, except the root.
after flash you will see the SuperSU app in the app drawer.
flashing this firmware do not doing wipe data. you will not lose anything.
also, this flash not increase your download binary count.
This file will work on any firmware/baseband/csc. you can always flash it like a stock firmware.
base on - XXAMC1.
PDA - S5301XXAMC1
PHONE- S5301XXMC1
CSC- S5301SERAMB1
Android version: 4.04
Download
https://mega.co.nz/#!qQ8B2BxZ!fhAggBRAzvsPzYejncA_Zlbkf-9r6UhPGU1BBYlbHqw
Installation instructions
install samsung usb drivers from here.
Download the 7z file above and extract it (with winrar or 7z) to some folder, you should receive a tar.md5 file.
Open odin 3 (attached in the zip)
Put the tar.md5 file in pda.
Put the device in download mode. (vol down + home + power button, and then click on vol up)
Connect your phone to usb and wait for odin detect the device.
Click start.
Enjoy
If you want to thank me for this work, you can do this by donating.. :good:

thank you very much
I'll try it but does it has Arabic language ??

I don't remember, but i think it does.

Don't work to me, apear modem error and stop odim
Here Odim check
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5301XXAMC1_S5301SERAMB1_S5301XXMC1_HOME_ROOTED.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> BcmCP.img.md5
<ID:0/012> NAND Write Start!!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<ID:0/012> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

dragaoheremita said:
Here Odim check
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5301XXAMC1_S5301SERAMB1_S5301XXMC1_HOME_ROOTED.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> BcmCP.img.md5
<ID:0/012> NAND Write Start!!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<ID:0/012> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Confirm that Kies is not running.

panda00 said:
Confirm that Kies is not running.
Click to expand...
Click to collapse
Kies is ok, im put back my phone with odin 3.07, and recovery.

Can anyone help me pls?
Is there any custom rom or if i root the phone can i disable that fuction?
http://forum.xda-developers.com/showthread.php?p=44391342#post44391342http://forum.xda-developers.com/showpost.php?p=44391342&postcount=1

avicohh said:
Hi Evryone.
Until somebody will release CWM Recovery or any root method for the galaxy pocket plus, I managed to create a pre-rooted firmware.
This firmware base on the last build for S5301, is a full firmware exactly like the original, except the root.
after flash you will see the SuperSU app in the app drawer.
flashing this firmware do not doing wipe data. you will not lose anything.
also, this flash not increase your download binary count.
This file will work on any firmware/baseband/csc. you can always flash it like a stock firmware.
base on - XXAMC1.
PDA - S5301XXAMC1
PHONE- S5301XXMC1
CSC- S5301SERAMB1
Android version: 4.04
Download
https://mega.co.nz/#!qQ8B2BxZ!fhAggBRAzvsPzYejncA_Zlbkf-9r6UhPGU1BBYlbHqw
Installation instructions
install samsung usb drivers from here.
Download the 7z file above and extract it (with winrar or 7z) to some folder, you should receive a tar.md5 file.
Open odin 3 (attached in the zip)
Put the tar.md5 file in pda.
Put the device in download mode. (vol down + home + power button, and then click on vol up)
Connect your phone to usb and wait for odin detect the device.
Click start.
Enjoy
If you want to thank me for this work, you can do this by donating.. :good:
Click to expand...
Click to collapse
Dear @avicohh
Can i return back to my stock rom? If yes then how???
reply plzzzz

Yes.
Just flash stock rom.
Sent from my Nexus 5 using Tapatalk

[Q] Having trouble upgrading from 2.3.6 to 4.1.2

I have an ATT Samsung SGH-i727 running 2.3.6.
I tried to update it to 4.1.2 stock ATT with Kies, but Kies did not work; it said it could not contact the upgrade server.
So I downloaded Odin 1.85, downloaded ATT stock 4.1.2, and selected the ROM with the PDA button and pressed start. Auto reboot and Reset time were checked.
An hour or two passed and Odin was hanging on system.img.ext4. It never completed. I rebooted, and now it is stuck in "Firmware upgrade encountered an issue. Please selecte recovery mode in Kies and try again."
I tried starting over in Odin, but it says that the write operation failed when it gets to system.img.ext4.
Any guidance on how to get this working?
Thanks!
P.S. Here is the full log from Odin after trying again:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I727UCMC1_I727ATTMC1_844945_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> amss.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> cache.img.ext4
<ID:0/004> mdm.bin
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse

Re-download the Odin file. It's probably a bad download. Check it's md5 after downloading.

go through the troubleshooting section here [HOWTO] NEWB GUIDES To: | RESTORE TO STOCK
note: in your log this line
"<OSM> KIES_HOME_I727UCMC1_I727ATTMC1_844945_REV02_user_l ow_ship.tar.md5 is valid"
there is a space between "l" and "o" in the word "low", did you edit the file name b4 using odin or is the space there because of the copy/paste to the post.
if I had to guess it would be driver issues since odin confirmed the md5 was ok, but go through the trouble shooting section from above link

Also a trick I've learned with Odin, instead of just double clicking to open, right click and select run as administrator. haven't had a hang on it since using this method. Maybe that will help.

Fixed
Redownloaded firmware using link in troubleshooting guide and updated successfully. Thanks.

[Q] Need to downgrade to 4.0.3

I need to downgrade my Galaxy Tab 10.1 (10 inch) from 4.2.2 to 4.0.3 because i need to debug an app on that particular version. Can someone please advice? I am new to all this - but this is what I have learned from browsing this forum:
(1) I will have to root my device
(2) I need the ROM for 4.0.3
(3) I will also need 0din
Anyways, I will appreciate if someone can help me out with instructions and downloads - that will be really helpful.
Thanks!

kaarigar said:
I need to downgrade my Galaxy Tab 10.1 (10 inch) from 4.2.2 to 4.0.3 because i need to debug an app on that particular version. Can someone please advice? I am new to all this - but this is what I have learned from browsing this forum:
(1) I will have to root my device
(2) I need the ROM for 4.0.3
(3) I will also need 0din
Anyways, I will appreciate if someone can help me out with instructions and downloads - that will be really helpful.
Thanks!
Click to expand...
Click to collapse
Download 4.0.3 from tsar3000 and for odin google it. Download pit files from tsar3000 and flash new rom from odin.
---------- Post added at 10:51 PM ---------- Previous post was at 10:50 PM ----------
-SAM- said:
Download 4.0.3 from tsar3000 and for odin google it. Download pit files from tsar3000 and flash new rom from odin.
Click to expand...
Click to collapse
Root is not needed

-SAM- said:
Download 4.0.3 from tsar3000 and for odin google it. Download pit files from tsar3000 and flash new rom from odin.
---------- Post added at 10:51 PM ---------- Previous post was at 10:50 PM ----------
Root is not needed
Click to expand...
Click to collapse
Thanks for quick reply. I did find the 4.0.3 downloads but I don't see one for the US. Does it matter which one I install?
Update: Oops - I don't find 4.0.3 download for P5113.

Easy dude no root needed as you are going to downgrade to official ICS 4.0.3 and there's no problem in downloading other country Firmware
You can download the ROM from SamMobile, here's the link for it but it's for GSM Version the P5100 if you're wifi version DON'T DOWNLOAD you can search it in Sammobile you'll find it (UK Version) : http://terafile.co/b1925899596b/P5100XWBLF1_P5100BTUBLF1_BTU.zip
make sure you have the latest usb drivers , you can download it from here :http://forum.xda-developers.com/showthread.php?t=2038555
and you can download Odin from here : http://forum.xda-developers.com/showthread.php?t=2189539
Then Extract the Firmware and then Check F.Reset Time and Auto-Reboot Make Sure Re-Partition isnot Checked and then Click PDA on ODIN and Select the extracted tar.md5 file and Click Start then wait for it to finish then you're done downgrading

Hassan 4 said:
Easy dude no root needed as you are going to downgrade to official ICS 4.0.3 and there's no problem in downloading other country Firmware
You can download the ROM from SamMobile, here's the link for it but it's for GSM Version the P5100 if you're wifi version DON'T DOWNLOAD you can search it in Sammobile you'll find it (UK Version) : http://terafile.co/b1925899596b/P5100XWBLF1_P5100BTUBLF1_BTU.zip
make sure you have the latest usb drivers , you can download it from here :http://forum.xda-developers.com/showthread.php?t=2038555
and you can download Odin from here : http://forum.xda-developers.com/showthread.php?t=2189539
Then Extract the Firmware and then Check F.Reset Time and Auto-Reboot Make Sure Re-Partition isnot Checked and then Click PDA on ODIN and Select the extracted tar.md5 file and Click Start then wait for it to finish then you're done downgrading
Click to expand...
Click to collapse
Thanks, Hassan. It seems that the link to download the USB drivers form that the post you pointed out has been removed, ny other place I can download from?

kaarigar said:
Thanks, Hassan. It seems that the link to download the USB drivers form that the post you pointed out has been removed, ny other place I can download from?
Click to expand...
Click to collapse
Well, finally I managed to flash the ROM. It went well till end - then it gave the error, as I have pasted below.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XWBLE4_P5100BTUBLE1_P5100XXLE4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any advise?

kaarigar said:
Well, finally I managed to flash the ROM. It went well till end - then it gave the error, as I have pasted below.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XWBLE4_P5100BTUBLE1_P5100XXLE4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any advise?
Click to expand...
Click to collapse
Well, it seems I am in deeper trouble now - the tablet displays the dreaded "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
I tried the recovery mode in Kies - it says that "GT-P5113 does not support initializing."
I tried through 0din too - but even it doesn't do anything to fix this situation.
Looks like that I am now stuck forever with this issue. Can some one please help me out?

kaarigar said:
Well, it seems I am in deeper trouble now - the tablet displays the dreaded "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
I tried the recovery mode in Kies - it says that "GT-P5113 does not support initializing."
I tried through 0din too - but even it doesn't do anything to fix this situation.
Looks like that I am now stuck forever with this issue. Can some one please help me out?
Click to expand...
Click to collapse
Try flash recovery first for your devices, then try to flash the rom again.

[Completed] Soft bricked Samsung Galaxy S4 GT-I9505

Recently I was trying to flash a firmware to update from Android Jellybean 4.3 to 5.0.1 lollipop. Ended up soft-bricking my phone.
Here's what I have already tried:
1. Do not tell me to change the USB cable/port, as it worked completely fine to root my phone the day before it got bricked.
2. I downloaded what (I think) is the stock firmware of my phone, and tried to flash it with Odin (3.07, 3.09 and 3.10.6) and a PIT file. (Gave an error without the PIT)
Here's the logs of what happens:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505OJVEMK4_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
It fails, and nothing happens. Sometimes on the phone's screen, it also shows "SV REV. CHECK FAIL : fused : 4, Binary : 3" in one of the lines. Not sure what it means.
3. I tried flashing the PIT file without a PDA, and it succeeds, but then it gets stuck in the start-screen boot loop.
4. I cannot go into recovery mode, I've tried it but it didn't work. (Home button + Power + Vol Up.) I can only go into download mode..
Please help me.

bogdan109 said:
Connect your phone to pc and go to device manager. How does it appear in to device manager?
Sent from my SM-G901F using Tapatalk 2
Click to expand...
Click to collapse
Well.. ever since it was bricked, I can't seem to find it in the device manager at all, though Odin does seem to recognize my device.
Also, I reinstalled Samsung Kies and the drivers several times, but it always gets stuck on "connecting device" each time on Kies.

bogdan109 said:
Connect your phone to pc and go to device manager. How does it appear in to device manager?
Sent from my SM-G901F using Tapatalk 2
Click to expand...
Click to collapse
After trying to update Kies drivers once more, now it shows under Modems as "Samsung Mobile USB Modem #5"

Cleon7 said:
After trying to update Kies drivers once more, now it shows under Modems as "Samsung Mobile USB Modem #5"
Click to expand...
Click to collapse
After updating drivers with an ADB-based toolkit, it doesn't show in the device manager again.

Someone please help.. I'm running out of options..

Cleon7 said:
Recently I was trying to flash a firmware to update from Android Jellybean 4.3 to 5.0.1 lollipop. Ended up soft-bricking my phone.
Here's what I have already tried:
1. Do not tell me to change the USB cable/port, as it worked completely fine to root my phone the day before it got bricked.
2. I downloaded what (I think) is the stock firmware of my phone, and tried to flash it with Odin (3.07, 3.09 and 3.10.6) and a PIT file. (Gave an error without the PIT)
Here's the logs of what happens:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505OJVEMK4_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
It fails, and nothing happens. Sometimes on the phone's screen, it also shows "SV REV. CHECK FAIL : fused : 4, Binary : 3" in one of the lines. Not sure what it means.
3. I tried flashing the PIT file without a PDA, and it succeeds, but then it gets stuck in the start-screen boot loop.
4. I cannot go into recovery mode, I've tried it but it didn't work. (Home button + Power + Vol Up.) I can only go into download mode..
Please help me.
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Here is everything you need to know.
For futher questions head over here > Galaxy S 4 Q&A, Help & Troubleshooting
Good luck!

nilac said:
Hi and thank you for using XDA Assist
Here is everything you need to know.
For futher questions head over here > Galaxy S 4 Q&A, Help & Troubleshooting
Good luck!
Click to expand...
Click to collapse
I've already tried the procedure in that thread, and after failing several times, I decided to start a thread here..
Anyway thanks, I'll open a new thread in the board you provided.

Soft Bricked GT-S7582

I am following "[Guide] Know your Device: Galaxy S Duos2 GT-S7582~Root~Odin~CWM~ROM LIST |2014.06.08|" this process to flash my device but its not working
please help
odin log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7582DDUANJ1_S7582ODDANJ1_S7582DDUANI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> BcmCP.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Can anybody tell me the problem how can i fix it

Flash the latest firmware from Odin ..u can download it from firmwarefile.com

Muscular droid said:
Flash the latest firmware from Odin ..u can download it from firmwarefile.com
Click to expand...
Click to collapse
I have already download the latest firmware from there.
Is there any other solution available for it then please help me out

rename the .tar.md5 file to .tar, open with winrar or anything that can read .tar and tell me if it having sboot.bin in there or not?
also your phone is s7580 or s7582?

​
sandpox said:
rename the .tar.md5 file to .tar, open with winrar or anything that can read .tar and tell me if it having sboot.bin in there or not?
also your phone is s7580 or s7582?
Click to expand...
Click to collapse
no it doesn't contain sboot.bin in there
i have attached the screenshot of the files in there
and my device is s7582

kishorprabhat said:
​
no it doesn't contain sboot.bin in there
i have attached the screenshot of the files in there
and my device is s7582
Click to expand...
Click to collapse
Looks like the last stock ROM which installed on your device is too old and its bootloader doesn't accept sign of new stock ROM, try to download another ROM but lower down in the list on samfirmware

sandpox said:
Looks like the last stock ROM which installed on your device is too old and its bootloader doesn't accept sign of new stock ROM, try to download another ROM but lower down in the list on samfirmware
Click to expand...
Click to collapse
okay trying with oldest one available on samfirmware
wait for my replay because free download service of samfrimware is under maintenance till 28 Nov so unable to download rom

kishorprabhat said:
okay trying with oldest one available on samfirmware
wait for my replay because free download service of samfrimware is under maintenance till 28 Nov so unable to download rom
Click to expand...
Click to collapse
http://updato.com/firmware-archive-select-model?q=gt-s7582

<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7582DDUANJ1_S7582ODDANJ1_S7582DDUANI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> BcmCP.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> dt-blob
<ID:0/005> hidden.img
<ID:0/005> param.lfs
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
downloaded rom from the site you provided and it worked
thank you very much

Hello everyone.
I have a big problem i had root on my GT-S7582
On the other day the mobile phone hung up and when I went to call it it arrives the part of for the password and it restarts and it stays like this always and does not let to reset by keys somebody knows how to solve this problem? I've tried several things but it does not work.
Sorry for my english
(I'm from Portugal, Portugal phone)

SérgioVoid said:
Hello everyone.
I have a big problem i had root on my GT-S7582
On the other day the mobile phone hung up and when I went to call it it arrives the part of for the password and it restarts and it stays like this always and does not let to reset by keys somebody knows how to solve this problem? I've tried several things but it does not work.
Sorry for my english
(I'm from Portugal, Portugal phone)
Click to expand...
Click to collapse
You have to reset your phone, to do so turn it off, go to recovery(press power,home , vol up key simultaneously) then use vol key to move up down, select format or factory reset whatever is present there and then apply it.....it will fix your problem

Vishal Shrivastav said:
You have to reset your phone, to do so turn it off, go to recovery(press power,home , vol up key simultaneously) then use vol key to move up down, select format or factory reset whatever is present there and then apply it.....it will fix your problem
Click to expand...
Click to collapse
Hello.
I already did it wrong but when I go to restart it says error in big letters.

SérgioVoid said:
Hello.
I already did it wrong but when I go to restart it says error in big letters.
Click to expand...
Click to collapse
Then download odin and firmware from Google, put i in your computer, turn off your phone go to download mode(press power button,home key and volume down (not up ) key simultaneously)
Open Odin on computer select PIT/AP and locate firmware you just downloaded connect your phone through usb when it show [com 6 ] or something like that then press start, leave it till process complete, it will reboot in between the process, dont panic just wait till it say ok.....turn it on injoy, i hope you didn't installed any custom ROMs like cyanogen 12,13,14 etc. If you did, then you have to factory reset it as i mentioned earlier

Vishal Shrivastav said:
Then download odin and firmware from Google, put i in your computer, turn off your phone go to download mode(press power button,home key and volume down (not up ) key simultaneously)
Open Odin on computer select PIT/AP and locate firmware you just downloaded connect your phone through usb when it show [com 6 ] or something like that then press start, leave it till process complete, it will reboot in between the process, dont panic just wait till it say ok.....turn it on injoy, i hope you didn't installed any custom ROMs like cyanogen 12,13,14 etc. If you did, then you have to factory reset it as i mentioned earlier
Click to expand...
Click to collapse
OK thank you!
How can I find out what my original Firmaware is? And where can I find the PIT I could not find.

SérgioVoid said:
OK thank you!
How can I find out what my original Firmaware is? And where can I find the PIT I could not find.
Click to expand...
Click to collapse
http://www.samprix.com/samsung-galaxy-s-duos-2-gt-s7582-official-firmware-update/ you will find it here, just download the firmware for your contry,

Vishal Shrivastav said:
http://www.samprix.com/samsung-galaxy-s-duos-2-gt-s7582-official-firmware-update/ you will find it here, just download the firmware for your contry,
Click to expand...
Click to collapse
Did not work does not leave the part that says samsung
I do not know what else to do anymore.

Are you on stock ROM
Sent from my Intex Cloud Swift using XDA Labs
---------- Post added at 08:22 PM ---------- Previous post was at 08:20 PM ----------
Muscular droid said:
Are you on stock ROM
Click to expand...
Click to collapse
Try installing TWRP recovery and flash custom ROM !!!!
Sent from my Intex Cloud Swift using XDA Labs