Hy guys.
I need help to flash my Samsung SM-G900F. I've downloaded an official Rom and I tried to to flash it whit Odin v3.09, but every time i get the same error at the end of the process and my phone display's the same message: "Some thing went wrong. Please connect to Keis " or something like that. Android vresion: G900FXX1ANG8. And another strange thing is that I can't enter the Recovery Mode, when I press volume up+power+home nothing happens. Please help me flash an official rom.
AlexTavi86 said:
Hy guys.
I need help to flash my Samsung SM-G900F. I've downloaded an official Rom and I tried to to flash it whit Odin v3.09, but every time i get the same error at the end of the process and my phone display's the same message: "Some thing went wrong. Please connect to Keis " or something like that. Android vresion: G900FXX1ANG8. And another strange thing is that I can't enter the Recovery Mode, when I press volume up+power+home nothing happens. Please help me flash an official rom.
Click to expand...
Click to collapse
so you are still able to get into download mode? also give us a picture of what ODIN says, you should try to connect it to kies which would install stock rom itself for you, ODIN is basically already inside kies and we ripped it from it.
Trozzul said:
so you are still able to get into download mode? also give us a picture of what ODIN says, you should try to connect it to kies which would install stock rom itself for you, ODIN is basically already inside kies and we ripped it from it.
Click to expand...
Click to collapse
Yes, I can still acces the dowload mode. Odin fails at the end of flashing after writing the modem the box at the top turns red and FAIL appear. The phone remains in download mode, and when I try to start it shows this message “Firmware Upgrade Encountered an Issue”
AlexTavi86 said:
Yes, I can still acces the dowload mode. Odin fails at the end of flashing after writing the modem the box at the top turns red and FAIL appear. The phone remains in download mode, and when I try to start it shows this message “Firmware Upgrade Encountered an Issue”
Click to expand...
Click to collapse
“Firmware Upgrade Encountered an Issue” yeah i would try to use kies then, are you sure you are using the correct firmware for your model? where did you get the firmware? i would recommend sammobile.com
Trozzul said:
“Firmware Upgrade Encountered an Issue” yeah i would try to use kies then, are you sure you are using the correct firmware for your model? where did you get the firmware? i would recommend sammobile.com
Click to expand...
Click to collapse
I tried Keis but it doesn't work. I have two software's one from sammobile and one from samsung-updates but it gives the same error.
AlexTavi86 said:
I tried Keis but it doesn't work. I have two software's one from sammobile and one from samsung-updates but it gives the same error.
Click to expand...
Click to collapse
can you tell me exactly what odin says in the little text box? copy paste please.
Trozzul said:
can you tell me exactly what odin says in the little text box? copy paste please.
Click to expand...
Click to collapse
I will try again and post here all the text.
Trozzul said:
can you tell me exactly what odin says in the little text box? copy paste please.
Click to expand...
Click to collapse
I can't post images. But here is the text form Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANH6_G900FPHN1ANH1_G900FXXU1ANG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
deepfreez86 said:
I can't post images. But here is the text form Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANH6_G900FPHN1ANH1_G900FXXU1ANG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I get exacly the same problem.
@AlexTavi86 @deepfreez86 do you both remember the last Offical version of samsung firmware you had? (Android version) and the custom rom android version you had before? i need to know them both. also what version of windows? windows 8 might be the problem if thats whats up.
Trozzul said:
@AlexTavi86 @deepfreez86 do you both remember the last Offical version of samsung firmware you had? (Android version) and the custom rom android version you had before? i need to know them both. also what version of windows? windows 8 might be the problem if thats whats up.
Click to expand...
Click to collapse
Windows 7 x64
Android version: G900FXX1ANG8
AlexTavi86 said:
Windows 7 x64
Android version: G900FXX1ANG8
Click to expand...
Click to collapse
i meant the android version like :Kit kat 4.4. or 4.4.2/4.4.3/4.4.4, but i did try to search up G900FXX1ANG8 on sammobile and i didn't see any firmware with that name, i think you might be flashing the wrong firmware. can you pop the battery and tell me what the model number there?
Trozzul said:
i meant the android version like :Kit kat 4.4. or 4.4.2/4.4.3/4.4.4, but i did try to search up G900FXX1ANG8 on sammobile and i didn't see any firmware with that name, i think you might be flashing the wrong firmware. can you pop the battery and tell me what the model number there?
Click to expand...
Click to collapse
SM-G900F is the model number
G900F official firmware
AlexTavi86 said:
SM-G900F is the model number
Click to expand...
Click to collapse
Curious, what is your phone's country of origin (and service provider).
This can help identify the correct firmware.
r35gtr said:
Curious, what is your phone's country of origin (and service provider).
This can help identify the correct firmware.
Click to expand...
Click to collapse
I bought the phone from Spain an now i'm using it in Romania and the carrier is Orange Romania. When i tryed to reset ot from settings it remained stuck a boot loop.
Related
My boot loader is updated with COH2 OTA and I try to flash BOG8 with ODIN after upfrading. Now I stuck with blue screen says An error has occured and need emergency recovery in SmartSwitch. But SmartSwitch shows unsupported device. Any Idea on how to avoid the problem?
Details below:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU2BOG8_G920FOJV2BOG8_G920FXXU2BOGE_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> param.bin
<ID:0/008> cm.bin
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> system.img
<ID:0/008> modem.bin
<ID:0/008> cache.img
<ID:0/008> hidden.img
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The problem is that you cant downgrade the bootloader. Thats why it failes at hidden.img. With Odin you only can flash a COH2 firmware. Older ones will definitly fail.
Why do you want to have a BOG8 rom instead of COH2?
XxM4tzexX said:
The problem is that you cant downgrade the bootloader. Thats why it failes at hidden.img. With Odin you only can flash a COH2 firmware. Older ones will definitly fail.
Why do you want to have a BOG8 rom instead of COH2?
Click to expand...
Click to collapse
My first firmware was G920FXXU1AODE. Then one OTA update reached automatically and I was unable to use 3G from now on. When I first bougt this phone I was able to use 3G. Now I am searching firmware that can give back the 3G function in my phone. I hope that G920FXXU2BOG8 can give me back the 3G. But now I am stuck with the blue screen saying error and need smartswitch but smartswitch does not recognise my device. What to do now? Need to wait for COH2?
rony0505 said:
My boot loader is updated with COH2 OTA and I try to flash BOG8 with ODIN after upfrading
Click to expand...
Click to collapse
When you got the OTA for COH2 then there should be an Odin flashable firmware available on Sammobile.
XxM4tzexX said:
When you got the OTA for COH2 then there should be an Odin flashable firmware available on Sammobile.
Click to expand...
Click to collapse
I am not getting it on Sammobile. I got the update yesterday.
Edit: Sammobile listed it. Downloading
Here is my odin log, I have a Canadian TELUS G920W8.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-----------------------------------------------------------------------------------------
Hi there, you should download smart switch and use emergency firmware recovery, From there you should click 'more' then click emergency software recovery. Key in your device SM-G920W8 then input your serial number (Found on your device Box) then voila, it should download the latest firmware for you.
---------- Post added at 14:08 ---------- Previous post was at 13:26 ----------
shotgun10ga said:
Here is my odin log, I have a Canadian TELUS G920W8.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-----------------------------------------------------------------------------------------
Click to expand...
Click to collapse
Hey, did it work for you? i sure hope so, as having a bricked phone makes you panic af, i was there too!
Nothing has worked yet
BUMP
When sboot fail that mean phone has newer bootloader than you are trying to flash.... downloas latest firmware from sammobile...
pS: you cannot bump after 1min
shotgun10ga said:
BUMP
Click to expand...
Click to collapse
you can try downloading the latest firmware versions for your phone from here did you update your software to 5.1.1? as i can see from the list on sammobile, the latest is just 5.0.2. Please quote me next time so i can be notified of your reply
zincsnow said:
you can try downloading the latest firmware versions for your phone from here did you update your software to 5.1.1? as i can see from the list on sammobile, the latest is just 5.0.2. Please quote me next time so i can be notified of your reply
Click to expand...
Click to collapse
wow smartboy , what ive said to him 1h ago before you post ?
lummujaj said:
wow smartboy , what ive said to him 1h ago before you post ?
Click to expand...
Click to collapse
well, pointing him in a more accurate direction would be much better i guess, no harm intended!
I had a similar issue the solution for me was to install twrp 2.8.7.1 recovery using Odin as my phone lacked stock recovery and would not flash firmware as a consequence.
Sent from my SM-G920W8 using XDA Free mobile app
Nothing has worked yet do i need a pit file?
zincsnow said:
Hi there, you should download smart switch and use emergency firmware recovery, From there you should click 'more' then click emergency software recovery. Key in your device SM-G920W8 then input your serial number (Found on your device Box) then voila, it should download the latest firmware for you.
---------- Post added at 14:08 ---------- Previous post was at 13:26 ----------
Hey, did it work for you? i sure hope so, as having a bricked phone makes you panic af, i was there too!
Click to expand...
Click to collapse
NOt yet
shotgun10ga said:
NOt yet
Click to expand...
Click to collapse
maybe you should consider bringing your device to Samsung?
I have the exact same problem right now. SM-G920F, tried to root, epic fail, tried to unroot, still a disaster. Smart Switch won't recognize my phone. Trying to download the latest firmware now, but it takes so long.. -_- will keep you posted if I find anything that works!
meikemeisje said:
I have the exact same problem right now. SM-G920F, tried to root, epic fail, tried to unroot, still a disaster. Smart Switch won't recognize my phone. Trying to download the latest firmware now, but it takes so long.. -_- will keep you posted if I find anything that works!
Click to expand...
Click to collapse
downloading the latest firmware from sammobile worked, it took about 6 hours to download it, but it worked!
meikemeisje said:
downloading the latest firmware from sammobile worked, it took about 6 hours to download it, but it worked!
Click to expand...
Click to collapse
congrats!
zincsnow said:
congrats!
Click to expand...
Click to collapse
My device is a Canadian TELUS Galaxy S6 32GB (SM-G920W8)
I can successfully flash TWRP recovery and flash custom roms, But i cant flash back stock firmware, I should also mention i was using xtrestolite rom that was using 5.1.1 witch is not available in canada yet.
after hitting start in odin the download fails, and the log reads as follows:
<id:0 005=""> Added!!
<osm> Enter CS for MD5..
<osm> Check MD5.. Do not unplug the cable..
<osm> Please wait..
<osm> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME. tar.md5 is valid.
<osm> Checking MD5 finished Sucessfully..
<osm> Leave CS..
<id:0 005=""> Odin engine v(ID:3.1005)..
<id:0 005=""> File analysis..
<id:0 005=""> SetupConnection..
<id:0 005=""> Initialzation..
<id:0 005=""> Get PIT for mapping..
<id:0 005=""> Firmware update start..
<id:0 005=""> SingleDownload.
<id:0 005=""> sboot.bin
<id:0 005=""> NAND Write Start!!
<id:0 005=""> FAIL!
<id:0 005="">
<id:0 005=""> Complete(Write) operation failed.
<osm> All threads completed. (succeed 0 / failed 1)
Also on my s6 , the download mode screen displays the following message:
SW REV. CHECK FAIL. DEVICE: 2, BINARY:1
Any ideas what the problem could be? Any help would be appreciated
shotgun10ga said:
My device is a Canadian TELUS Galaxy S6 32GB (SM-G920W8)
I can successfully flash TWRP recovery and flash custom roms, But i cant flash back stock firmware, I should also mention i was using xtrestolite rom that was using 5.1.1 witch is not available in canada yet.
after hitting start in odin the download fails, and the log reads as follows:
<id:0 005=""> Added!!
<osm> Enter CS for MD5..
<osm> Check MD5.. Do not unplug the cable..
<osm> Please wait..
<osm> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME. tar.md5 is valid.
<osm> Checking MD5 finished Sucessfully..
<osm> Leave CS..
<id:0 005=""> Odin engine v(ID:3.1005)..
<id:0 005=""> File analysis..
<id:0 005=""> SetupConnection..
<id:0 005=""> Initialzation..
<id:0 005=""> Get PIT for mapping..
<id:0 005=""> Firmware update start..
<id:0 005=""> SingleDownload.
<id:0 005=""> sboot.bin
<id:0 005=""> NAND Write Start!!
<id:0 005=""> FAIL!
<id:0 005="">
<id:0 005=""> Complete(Write) operation failed.
<osm> All threads completed. (succeed 0 / failed 1)
Also on my s6 , the download mode screen displays the following message:
SW REV. CHECK FAIL. DEVICE: 2, BINARY:1
Any ideas what the problem could be? Any help would be appreciated
Click to expand...
Click to collapse
Supposedly you can't flash that 5.0.2 firmware is because your bootloader is already 5.1.1, therefore you can't downgrade the software, but i saw on Sammobile that Canada is going to get the update soon, so i guess you can use Smart Switch's emergency recovery to restore your phone soon.
So when you started what baseband were you on? Did you update to 5.1.1 I don't care if you did it via a ROM just did you update to 5.1.1 officially or did your phone come with 5.1.1 if it did you need to download the 5.1.1 firmware not the 5.0.2 firmware because of the new bootloader.
Edit: You could always use my guide which can be found here to make your own tar file that doesn't flash any bootloader only system, kernel, and recovery you will also get the latest Note 5 UI this may help you in case everything else fails.
zincsnow said:
congrats!
Click to expand...
Click to collapse
ethanscooter said:
So when you started what baseband were you on? Did you update to 5.1.1 I don't care if you did it via a ROM just did you update to 5.1.1 officially or did your phone come with 5.1.1 if it did you need to download the 5.1.1 firmware not the 5.0.2 firmware because of the new bootloader.
Edit: You could always use my guide which can be found here to make your own tar file that doesn't flash any bootloader only system, kernel, and recovery you will also get the latest Note 5 UI this may help you in case everything else fails.
Click to expand...
Click to collapse
My phone came with 5.0.2
ethanscooter said:
So when you started what baseband were you on? Did you update to 5.1.1 I don't care if you did it via a ROM just did you update to 5.1.1 officially or did your phone come with 5.1.1 if it did you need to download the 5.1.1 firmware not the 5.0.2 firmware because of the new bootloader.
Edit: You could always use my guide which can be found here to make your own tar file that doesn't flash any bootloader only system, kernel, and recovery you will also get the latest Note 5 UI this may help you in case everything else fails.
Click to expand...
Click to collapse
I started with 5.0.2 and i flashed twrp and i flashed a 5.1.1 rom.
Howdy everyone! Im a new member, but Ive been using the site since the HTC G1 from T-Mobile
I have a G900P Galaxy S5 for Boost Mobile. (It was on 5.0 if that changes anything) I bought the phone, played with it for a few days before I would decide to activate it. I hit the reactivation lock thinking it would be safe if anything were to happen to it, then when I activated it and it updated the Profile, PRL and whatever else for activation, it got pissed off and said
"custom binary blocked by reactivation lock"
Ive tried using Odin to bring me back, but I cannot load the NKD lollipop bootloader, phone says:
SW rev check fail : [tz] Fused 3 > Binary 1
Odin says:
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> NON-HLOS.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
I tried adding the stock Rom (G900P_NKD_FullRestore) also using Odin, but that also makes it upset
Odin Says:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now the phone says
Firmware upgrade encountered an issue. Please Select recovery mode in Kies and try again
Do I start to cry over my new paperweight here?
I hope Im not totally dead in the water here. What should I do? and what is possible at this point?
Kies will restore it to latest firmware or you can odin the latest. The phone has newer firmware on it than you where trying to flash it looks like. Cant downgrade to that one.
Ok, if I download a newer firmware, will I need the bootloader installed? Or do I need a newer bootloader too?
If you download the stock firmware it will have the bootloader and all in it. Thats one of the reasons as to why the file is so big. You can download the firmware from your cell provider or you can download one from here http://www.sammobile.com/firmwares/ also, you can find rooted and stock roms here at XDA. Just make sure you download the rom that is for your phone!
got it, Ok cool! Im using Rwilco12's site. Im going to try this again, wish me luck!
IT WORKED!
YAY! Thanks guys!
Same issue
keepinitril said:
got it, Ok cool! Im using Rwilco12's site. Im going to try this again, wish me luck!
IT WORKED!
YAY! Thanks guys!
Click to expand...
Click to collapse
Could you possibly list the steps you used to recover your phone ? i'm having the exact same issue and am trying to restore my phone. I just cannot seem to locate a working download. Also i want to make sure I do everything correctly.
Download Odin
Download your rom from RWilco12
http://rwilco12.com/downloads.php?dir=Files/Devices/
Put your phone into download mode
use Odin (give it time)
done
Thank you! Got it working again. You just saved me getting a whole new phone.
Reactivation Lock
autotech40 said:
Kies will restore it to latest firmware or you can odin the latest. The phone has newer firmware on it than you where trying to flash it looks like. Cant downgrade to that one.
Click to expand...
Click to collapse
I have same issue & and i have running lollipop (bok4) . please give me solution for get rid of reactivation lock. I have tried many roms to flash but field by this error also Rwilco12's.
Odin says:
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> NON-HLOS.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Hello guys.
My Galaxy S7 had a problem once where it was stuck at the Samsung Logo when booting. I took it to a Samsung Rep and they repaired it for me because it was on the warranty period. 3 months after this repair the phone had the same issue, but as it was out of warranty already i flashed a stock rom through odin and it worked. 2 weeks later i was using the phone playing some games while listening to music and then suddenly it restarted and now it boots straight into the "Downloading... please don't turn off" Odin Screen. When i restart the phone it shows the Samsung Galaxy S7 screen real fast and then goes to the "Downloading..." screen, without even showing the "Warning A custom OS...." screen. And when on this screen it does not show the usual Odin screen info on the top left corner. If i try to restart it with the Volume Down, Power and Home sometimes it shows the usual screens for Odin (First the Warning Screen and then the Downloading with the info on the top left corner).
I tried to flash a new firmware but it does not work. I searched a lot on the internet but couldn't find anyone with the same issue, only people who are stuck on odin mode but then when they press the volume down, home and power button the phone boots normally.
This is the Log when i try to flash with HOME_CSC
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And when i try with CSC i get the "No PIT Partition" error. The firmware that was flashed before this last problem is the same i'm trying to flash right now : G930FXXS1BPJC_G930FZTO1BPIF_ZTO (Brazil Unlocked) from 10/11/16. Downloaded on SamMobile
Thanks
icelest said:
Hello guys.
My Galaxy S7 had a problem once where it was stuck at the Samsung Logo when booting. I took it to a Samsung Rep and they repaired it for me because it was on the warranty period. 3 months after this repair the phone had the same issue, but as it was out of warranty already i flashed a stock rom through odin and it worked. 2 weeks later i was using the phone playing some games while listening to music and then suddenly it restarted and now it boots straight into the "Downloading... please don't turn off" Odin Screen. When i restart the phone it shows the Samsung Galaxy S7 screen real fast and then goes to the "Downloading..." screen, without even showing the "Warning A custom OS...." screen. And when on this screen it does not show the usual Odin screen info on the top left corner. If i try to restart it with the Volume Down, Power and Home sometimes it shows the usual screens for Odin (First the Warning Screen and then the Downloading with the info on the top left corner).
I tried to flash a new firmware but it does not work. I searched a lot on the internet but couldn't find anyone with the same issue, only people who are stuck on odin mode but then when they press the volume down, home and power button the phone boots normally.
This is the Log when i try to flash with HOME_CSC
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And when i try with CSC i get the "No PIT Partition" error. The firmware that was flashed before this last problem is the same i'm trying to flash right now : G930FXXS1BPJC_G930FZTO1BPIF_ZTO (Brazil Unlocked) from 10/11/16. Downloaded on SamMobile
Thanks
Click to expand...
Click to collapse
Hi mate
Why is not in warranty still...should be a year
Are you using the latest Odin?
Are you also flashing AP BL & CP?
Go into recovery do a factory reset and try again.......
Try a different stock firmware
MAX 404 said:
Hi mate
Why is not in warranty still...should be a year
Are you using the latest Odin?
Are you also flashing AP BL & CP?
Go into recovery do a factory reset and try again.......
Try a different stock firmware
Click to expand...
Click to collapse
Samsung is denying the warranty because my screen has 2 cracks and they are saying that this problem was caused because of my "bad use" of the smartphone.
Yes. Using Odin 3.12.3.
I'm flashing AP, BL, CP and CSC.
Can't go into recovery. The phone goes straight to the odin screen. Can't do anything other than odin.
Already tried 3 firmwares from my csc (ZTO) and 2 from the Official Stock Rom thread here at XDA.
icelest said:
Samsung is denying the warranty because my screen has 2 cracks and they are saying that this problem was caused because of my "bad use" of the smartphone.
Yes. Using Odin 3.12.3.
I'm flashing AP, BL, CP and CSC.
Can't go into recovery. The phone goes straight to the odin screen. Can't do anything other than odin.
Already tried 3 firmwares from my csc (ZTO) and 2 from the Official Stock Rom thread here at XDA.
Click to expand...
Click to collapse
Try leaving BL out from the flash, only flash the other 3 parts
*Detection* said:
Try leaving BL out from the flash, only flash the other 3 parts
Click to expand...
Click to collapse
This is the log when using the other 3 without the BL
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> Home Binary Download
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Try to flash Twrp then make format data and flash custom Rom..
Muhammad Rihawi said:
Try to flash Twrp then make format data and flash custom Rom..
Click to expand...
Click to collapse
Odin Fails to flash TWRP. This is the log:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Don't try flashing anything custom or you'll trip the KNOX warranty uFuse
Phone is still under warranty for 12 months, take it back, the repair failed they should fix it again
icelest said:
Samsung is denying the warranty because my screen has 2 cracks and they are saying that this problem was caused because of my "bad use" of the smartphone.
Yes. Using Odin 3.12.3.
I'm flashing AP, BL, CP and CSC.
Can't go into recovery. The phone goes straight to the odin screen. Can't do anything other than odin.
Already tried 3 firmwares from my csc (ZTO) and 2 from the Official Stock Rom thread here at XDA.
Click to expand...
Click to collapse
icelest said:
This is the log when using the other 3 without the BL
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> Home Binary Download
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hi mate
In your first post you showed that odins fails on this step
cm.bin = Cryptography Manager , the function of this is to avoid downgrades
Do you remember what was the firmware you had? if not try to flash the very latest firmware available
Also i found a very similar case in a a S6 thread , the problem seems like the recovery was missing
http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736
check it out just in case the above solution fails
How to Extract Stock Recovery from Samsung Firmware!
MAX 404 said:
Hi mate
In your first post you showed that odins fails on this step
cm.bin = Cryptography Manager , the function of this is to avoid downgrades
Do you remember what was the firmware you had? if not try to flash the very latest firmware available
Also i found a very similar case in a a S6 thread , the problem seems like the recovery was missing
http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736
check it out just in case the above solution fails
How to Extract Stock Recovery from Samsung Firmware!
Click to expand...
Click to collapse
Thanks for the help. I'll try downloading the latest firmware and flashing it. After that i'll try the solution on the S6 thread. Thank you very much
MAX 404 said:
Hi mate
In your first post you showed that odins fails on this step
cm.bin = Cryptography Manager , the function of this is to avoid downgrades
Do you remember what was the firmware you had? if not try to flash the very latest firmware available
Also i found a very similar case in a a S6 thread , the problem seems like the recovery was missing
http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736
check it out just in case the above solution fails
How to Extract Stock Recovery from Samsung Firmware!
Click to expand...
Click to collapse
When trying the recovery.img method i got this log on Odin
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Currently downloading the latest firmware for tests
MAX 404 said:
Hi mate
In your first post you showed that odins fails on this step
cm.bin = Cryptography Manager , the function of this is to avoid downgrades
Do you remember what was the firmware you had? if not try to flash the very latest firmware available
Also i found a very similar case in a a S6 thread , the problem seems like the recovery was missing
http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736
check it out just in case the above solution fails
How to Extract Stock Recovery from Samsung Firmware!
Click to expand...
Click to collapse
I get this Odin Log when flashing the recovery method as displayed on the S6 thread
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
better try the different firmware but use some chrome or browser downloader to download the firmware not internet download manager.
any downloader which uses the single downloading node not multiple nodes like idm
it happened with me 2 i figured it out using this method.thanx
icelest said:
I get this Odin Log when flashing the recovery method as displayed on the S6 thread
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
What about flashing the latest firmware, you tried?
MAX 404 said:
What about flashing the latest firmware, you tried?
Click to expand...
Click to collapse
With the last firmware i get the same PIT error
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> Home Binary Download
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
icelest said:
With the last firmware i get the same PIT error
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> Home Binary Download
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
hi
are you using CSC or home_csc?
use CSC file it contains the pit file
MAX 404 said:
hi
are you using CSC or home_csc?
use CSC file it contains the pit file
Click to expand...
Click to collapse
With CSC i get this error
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What you have is a hardware fault. Aka brick.
icelest said:
With CSC i get this error
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hi mate
Did you re installed the Samsung drivers , try a different USB cable....better yet try all this in a different PC, just to make sure all this problems are not PC related
MAX 404 said:
Hi mate
Did you re installed the Samsung drivers , try a different USB cable....better yet try all this in a different PC, just to make sure all this problems are not PC related
Click to expand...
Click to collapse
Hi.
Yeah, tried it on 3 different PCs. Always the same errors :/ I'm guessing it's some hardware issue. Now i'll have to fight Samsung so they fix the phone on warranty
Hi
When unrooting my phone I accidentally deleted the OS from my Samsung S6.
My model is SM-G920F
The phone was bought directly from Samsung via Amazon and is unlocked. I live in the UK and my sim is registered to Virgin.
Currently I can put the phone in Downloading (Odin mode) and TWRP.
I have attempted to Flash the firmware with Odin but I get the following fail message each time.
"<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!"
I have updated my drivers and attempted to use a different port on my PC.
I am using Odin v3.12
I have attempted to use Smart Switch but I get the error message
"SM-G920F does not support initialising. Please contact our service centre."
Samsung service centre did not know what to do with the phone.
I would appreciate any advice. I've accepted my phone data is gone.
Gullion said:
Hi
When unrooting my phone I accidentally deleted the OS from my Samsung S6.
My model is SM-G920F
The phone was bought directly from Samsung via Amazon and is unlocked. I live in the UK and my sim is registered to Virgin.
Currently I can put the phone in Downloading (Odin mode) and TWRP.
I have attempted to Flash the firmware with Odin but I get the following fail message each time.
"<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!"
I have updated my drivers and attempted to use a different port on my PC.
I am using Odin v3.12
I have attempted to use Smart Switch but I get the error message
"SM-G920F does not support initialising. Please contact our service centre."
Samsung service centre did not know what to do with the phone.
I would appreciate any advice. I've accepted my phone data is gone.
Click to expand...
Click to collapse
In twrp try and flash any rom , may work
hairyfred said:
In twrp try and flash any rom , may work
Click to expand...
Click to collapse
Where would I get access to roms to Flash in twrp?
Are they the same as .tar or .md5 files?
Gullion said:
Where would I get access to roms to Flash in twrp?
Are they the same as .tar or .md5 files?
Click to expand...
Click to collapse
......you've never flashed a rom have you.... Is this your first time rooting
hairyfred said:
......you've never flashed a rom have you.... Is this your first time rooting
Click to expand...
Click to collapse
I've flashed with Odin in the past. Not with TWRP.
But yeah, I'm honestly a noob in way over my head.
I've had a new error on Odin attempting to flash.
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
if u can accses twrp just flash a rom and it should be good
First of all. What Samsung Firmware are you flashing, are you trying to downgrade to a older firmware version than what is already on there?
Try the latest samsung firmware and make sure it's suited for the model of your device.
Try another usb port and another microUSB cable. It is common for bad microUSB cables to make ODIN flash fail.