Database Info

[Q] Need help flashing a Samsung Galaxy S5 G900F

Hy guys.
I need help to flash my Samsung SM-G900F. I've downloaded an official Rom and I tried to to flash it whit Odin v3.09, but every time i get the same error at the end of the process and my phone display's the same message: "Some thing went wrong. Please connect to Keis " or something like that. Android vresion: G900FXX1ANG8. And another strange thing is that I can't enter the Recovery Mode, when I press volume up+power+home nothing happens. Please help me flash an official rom.

AlexTavi86 said:
Hy guys.
I need help to flash my Samsung SM-G900F. I've downloaded an official Rom and I tried to to flash it whit Odin v3.09, but every time i get the same error at the end of the process and my phone display's the same message: "Some thing went wrong. Please connect to Keis " or something like that. Android vresion: G900FXX1ANG8. And another strange thing is that I can't enter the Recovery Mode, when I press volume up+power+home nothing happens. Please help me flash an official rom.
Click to expand...
Click to collapse
so you are still able to get into download mode? also give us a picture of what ODIN says, you should try to connect it to kies which would install stock rom itself for you, ODIN is basically already inside kies and we ripped it from it.

Trozzul said:
so you are still able to get into download mode? also give us a picture of what ODIN says, you should try to connect it to kies which would install stock rom itself for you, ODIN is basically already inside kies and we ripped it from it.
Click to expand...
Click to collapse
Yes, I can still acces the dowload mode. Odin fails at the end of flashing after writing the modem the box at the top turns red and FAIL appear. The phone remains in download mode, and when I try to start it shows this message “Firmware Upgrade Encountered an Issue”

AlexTavi86 said:
Yes, I can still acces the dowload mode. Odin fails at the end of flashing after writing the modem the box at the top turns red and FAIL appear. The phone remains in download mode, and when I try to start it shows this message “Firmware Upgrade Encountered an Issue”
Click to expand...
Click to collapse
“Firmware Upgrade Encountered an Issue” yeah i would try to use kies then, are you sure you are using the correct firmware for your model? where did you get the firmware? i would recommend sammobile.com

Trozzul said:
“Firmware Upgrade Encountered an Issue” yeah i would try to use kies then, are you sure you are using the correct firmware for your model? where did you get the firmware? i would recommend sammobile.com
Click to expand...
Click to collapse
I tried Keis but it doesn't work. I have two software's one from sammobile and one from samsung-updates but it gives the same error.

AlexTavi86 said:
I tried Keis but it doesn't work. I have two software's one from sammobile and one from samsung-updates but it gives the same error.
Click to expand...
Click to collapse
can you tell me exactly what odin says in the little text box? copy paste please.

Trozzul said:
can you tell me exactly what odin says in the little text box? copy paste please.
Click to expand...
Click to collapse
I will try again and post here all the text.

Trozzul said:
can you tell me exactly what odin says in the little text box? copy paste please.
Click to expand...
Click to collapse
I can't post images. But here is the text form Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANH6_G900FPHN1ANH1_G900FXXU1ANG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

deepfreez86 said:
I can't post images. But here is the text form Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANH6_G900FPHN1ANH1_G900FXXU1ANG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I get exacly the same problem.

@AlexTavi86 @deepfreez86 do you both remember the last Offical version of samsung firmware you had? (Android version) and the custom rom android version you had before? i need to know them both. also what version of windows? windows 8 might be the problem if thats whats up.

Trozzul said:
@AlexTavi86 @deepfreez86 do you both remember the last Offical version of samsung firmware you had? (Android version) and the custom rom android version you had before? i need to know them both. also what version of windows? windows 8 might be the problem if thats whats up.
Click to expand...
Click to collapse
Windows 7 x64
Android version: G900FXX1ANG8

AlexTavi86 said:
Windows 7 x64
Android version: G900FXX1ANG8
Click to expand...
Click to collapse
i meant the android version like :Kit kat 4.4. or 4.4.2/4.4.3/4.4.4, but i did try to search up G900FXX1ANG8 on sammobile and i didn't see any firmware with that name, i think you might be flashing the wrong firmware. can you pop the battery and tell me what the model number there?

Trozzul said:
i meant the android version like :Kit kat 4.4. or 4.4.2/4.4.3/4.4.4, but i did try to search up G900FXX1ANG8 on sammobile and i didn't see any firmware with that name, i think you might be flashing the wrong firmware. can you pop the battery and tell me what the model number there?
Click to expand...
Click to collapse
SM-G900F is the model number

G900F official firmware
AlexTavi86 said:
SM-G900F is the model number
Click to expand...
Click to collapse
Curious, what is your phone's country of origin (and service provider).
This can help identify the correct firmware.

r35gtr said:
Curious, what is your phone's country of origin (and service provider).
This can help identify the correct firmware.
Click to expand...
Click to collapse
I bought the phone from Spain an now i'm using it in Romania and the carrier is Orange Romania. When i tryed to reset ot from settings it remained stuck a boot loop.

**URGENT** Cant flash Stock Firmware

Here is my odin log, I have a Canadian TELUS G920W8.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-----------------------------------------------------------------------------------------

Hi there, you should download smart switch and use emergency firmware recovery, From there you should click 'more' then click emergency software recovery. Key in your device SM-G920W8 then input your serial number (Found on your device Box) then voila, it should download the latest firmware for you.
---------- Post added at 14:08 ---------- Previous post was at 13:26 ----------
shotgun10ga said:
Here is my odin log, I have a Canadian TELUS G920W8.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-----------------------------------------------------------------------------------------
Click to expand...
Click to collapse
Hey, did it work for you? i sure hope so, as having a bricked phone makes you panic af, i was there too!

Nothing has worked yet

BUMP

When sboot fail that mean phone has newer bootloader than you are trying to flash.... downloas latest firmware from sammobile...
pS: you cannot bump after 1min

shotgun10ga said:
BUMP
Click to expand...
Click to collapse
you can try downloading the latest firmware versions for your phone from here did you update your software to 5.1.1? as i can see from the list on sammobile, the latest is just 5.0.2. Please quote me next time so i can be notified of your reply

zincsnow said:
you can try downloading the latest firmware versions for your phone from here did you update your software to 5.1.1? as i can see from the list on sammobile, the latest is just 5.0.2. Please quote me next time so i can be notified of your reply
Click to expand...
Click to collapse
wow smartboy , what ive said to him 1h ago before you post ?

lummujaj said:
wow smartboy , what ive said to him 1h ago before you post ?
Click to expand...
Click to collapse
well, pointing him in a more accurate direction would be much better i guess, no harm intended!

I had a similar issue the solution for me was to install twrp 2.8.7.1 recovery using Odin as my phone lacked stock recovery and would not flash firmware as a consequence.
Sent from my SM-G920W8 using XDA Free mobile app

Nothing has worked yet do i need a pit file?

zincsnow said:
Hi there, you should download smart switch and use emergency firmware recovery, From there you should click 'more' then click emergency software recovery. Key in your device SM-G920W8 then input your serial number (Found on your device Box) then voila, it should download the latest firmware for you.
---------- Post added at 14:08 ---------- Previous post was at 13:26 ----------
Hey, did it work for you? i sure hope so, as having a bricked phone makes you panic af, i was there too!
Click to expand...
Click to collapse
NOt yet

shotgun10ga said:
NOt yet
Click to expand...
Click to collapse
maybe you should consider bringing your device to Samsung?

I have the exact same problem right now. SM-G920F, tried to root, epic fail, tried to unroot, still a disaster. Smart Switch won't recognize my phone. Trying to download the latest firmware now, but it takes so long.. -_- will keep you posted if I find anything that works!

meikemeisje said:
I have the exact same problem right now. SM-G920F, tried to root, epic fail, tried to unroot, still a disaster. Smart Switch won't recognize my phone. Trying to download the latest firmware now, but it takes so long.. -_- will keep you posted if I find anything that works!
Click to expand...
Click to collapse
downloading the latest firmware from sammobile worked, it took about 6 hours to download it, but it worked!

meikemeisje said:
downloading the latest firmware from sammobile worked, it took about 6 hours to download it, but it worked!
Click to expand...
Click to collapse
congrats!

zincsnow said:
congrats!
Click to expand...
Click to collapse
My device is a Canadian TELUS Galaxy S6 32GB (SM-G920W8)
I can successfully flash TWRP recovery and flash custom roms, But i cant flash back stock firmware, I should also mention i was using xtrestolite rom that was using 5.1.1 witch is not available in canada yet.
after hitting start in odin the download fails, and the log reads as follows:
<id:0 005=""> Added!!
<osm> Enter CS for MD5..
<osm> Check MD5.. Do not unplug the cable..
<osm> Please wait..
<osm> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME. tar.md5 is valid.
<osm> Checking MD5 finished Sucessfully..
<osm> Leave CS..
<id:0 005=""> Odin engine v(ID:3.1005)..
<id:0 005=""> File analysis..
<id:0 005=""> SetupConnection..
<id:0 005=""> Initialzation..
<id:0 005=""> Get PIT for mapping..
<id:0 005=""> Firmware update start..
<id:0 005=""> SingleDownload.
<id:0 005=""> sboot.bin
<id:0 005=""> NAND Write Start!!
<id:0 005=""> FAIL!
<id:0 005="">
<id:0 005=""> Complete(Write) operation failed.
<osm> All threads completed. (succeed 0 / failed 1)
Also on my s6 , the download mode screen displays the following message:
SW REV. CHECK FAIL. DEVICE: 2, BINARY:1
Any ideas what the problem could be? Any help would be appreciated

shotgun10ga said:
My device is a Canadian TELUS Galaxy S6 32GB (SM-G920W8)
I can successfully flash TWRP recovery and flash custom roms, But i cant flash back stock firmware, I should also mention i was using xtrestolite rom that was using 5.1.1 witch is not available in canada yet.
after hitting start in odin the download fails, and the log reads as follows:
<id:0 005=""> Added!!
<osm> Enter CS for MD5..
<osm> Check MD5.. Do not unplug the cable..
<osm> Please wait..
<osm> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME. tar.md5 is valid.
<osm> Checking MD5 finished Sucessfully..
<osm> Leave CS..
<id:0 005=""> Odin engine v(ID:3.1005)..
<id:0 005=""> File analysis..
<id:0 005=""> SetupConnection..
<id:0 005=""> Initialzation..
<id:0 005=""> Get PIT for mapping..
<id:0 005=""> Firmware update start..
<id:0 005=""> SingleDownload.
<id:0 005=""> sboot.bin
<id:0 005=""> NAND Write Start!!
<id:0 005=""> FAIL!
<id:0 005="">
<id:0 005=""> Complete(Write) operation failed.
<osm> All threads completed. (succeed 0 / failed 1)
Also on my s6 , the download mode screen displays the following message:
SW REV. CHECK FAIL. DEVICE: 2, BINARY:1
Any ideas what the problem could be? Any help would be appreciated
Click to expand...
Click to collapse
Supposedly you can't flash that 5.0.2 firmware is because your bootloader is already 5.1.1, therefore you can't downgrade the software, but i saw on Sammobile that Canada is going to get the update soon, so i guess you can use Smart Switch's emergency recovery to restore your phone soon.

So when you started what baseband were you on? Did you update to 5.1.1 I don't care if you did it via a ROM just did you update to 5.1.1 officially or did your phone come with 5.1.1 if it did you need to download the 5.1.1 firmware not the 5.0.2 firmware because of the new bootloader.
Edit: You could always use my guide which can be found here to make your own tar file that doesn't flash any bootloader only system, kernel, and recovery you will also get the latest Note 5 UI this may help you in case everything else fails.

zincsnow said:
congrats!
Click to expand...
Click to collapse
ethanscooter said:
So when you started what baseband were you on? Did you update to 5.1.1 I don't care if you did it via a ROM just did you update to 5.1.1 officially or did your phone come with 5.1.1 if it did you need to download the 5.1.1 firmware not the 5.0.2 firmware because of the new bootloader.
Edit: You could always use my guide which can be found here to make your own tar file that doesn't flash any bootloader only system, kernel, and recovery you will also get the latest Note 5 UI this may help you in case everything else fails.
Click to expand...
Click to collapse
My phone came with 5.0.2

ethanscooter said:
So when you started what baseband were you on? Did you update to 5.1.1 I don't care if you did it via a ROM just did you update to 5.1.1 officially or did your phone come with 5.1.1 if it did you need to download the 5.1.1 firmware not the 5.0.2 firmware because of the new bootloader.
Edit: You could always use my guide which can be found here to make your own tar file that doesn't flash any bootloader only system, kernel, and recovery you will also get the latest Note 5 UI this may help you in case everything else fails.
Click to expand...
Click to collapse
I started with 5.0.2 and i flashed twrp and i flashed a 5.1.1 rom.

[Completed] Samsung wont boot after firmware upgrade

Samsung gt-s7710
my phone was not booting so i tried to instal new stock firmware using odin.
after instaling firmware i get firmware upgrade encounter an issue use kies to recover.
i have used kies firmware upgrade and initialization. when that has finish. the phone reboots.
and i get the same error firmware upgrade encounter an issue use kies to recover
i cant get the phone in recover mode volume up ,home, power
the only thing i get on my phone now is that error screen. or i can boot in download mode.
how do i fix this.

Hi !
Would have helped to tell us what happened before ending up onto this problem
Here is a workaround https://forum.xda-developers.com/showpost.php?p=40232503&postcount=43
Good luck !

The Samsung was stuck on bootloop. Tried all the tips i could find. And ended up flashing new firmware. The firmware was correct, and passed. But i only got the kies. firmware update error screen when the phone booted up
tried flashing the phone with the first image file in the link. the flashing was a pass, but the phone reboots to the error Firmware update encounterd a issue. have tried many firmwares found on samsmobile. but the flash is a pass, and the phone reboots with the same error
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> STE_boot1.img
<ID:0/006> STE_boot2.img
<ID:0/006> boot.img
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse

Deleted my OS

Hi
When unrooting my phone I accidentally deleted the OS from my Samsung S6.
My model is SM-G920F
The phone was bought directly from Samsung via Amazon and is unlocked. I live in the UK and my sim is registered to Virgin.
Currently I can put the phone in Downloading (Odin mode) and TWRP.
I have attempted to Flash the firmware with Odin but I get the following fail message each time.
"<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!"​
I have updated my drivers and attempted to use a different port on my PC.
I am using Odin v3.12
I have attempted to use Smart Switch but I get the error message
"SM-G920F does not support initialising. Please contact our service centre."
Samsung service centre did not know what to do with the phone.
I would appreciate any advice. I've accepted my phone data is gone.

Gullion said:
Hi
When unrooting my phone I accidentally deleted the OS from my Samsung S6.
My model is SM-G920F
The phone was bought directly from Samsung via Amazon and is unlocked. I live in the UK and my sim is registered to Virgin.
Currently I can put the phone in Downloading (Odin mode) and TWRP.
I have attempted to Flash the firmware with Odin but I get the following fail message each time.
"<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!"​
I have updated my drivers and attempted to use a different port on my PC.
I am using Odin v3.12
I have attempted to use Smart Switch but I get the error message
"SM-G920F does not support initialising. Please contact our service centre."
Samsung service centre did not know what to do with the phone.
I would appreciate any advice. I've accepted my phone data is gone.
Click to expand...
Click to collapse
In twrp try and flash any rom , may work

hairyfred said:
In twrp try and flash any rom , may work
Click to expand...
Click to collapse
Where would I get access to roms to Flash in twrp?
Are they the same as .tar or .md5 files?

Gullion said:
Where would I get access to roms to Flash in twrp?
Are they the same as .tar or .md5 files?
Click to expand...
Click to collapse
......you've never flashed a rom have you.... Is this your first time rooting

hairyfred said:
......you've never flashed a rom have you.... Is this your first time rooting
Click to expand...
Click to collapse
I've flashed with Odin in the past. Not with TWRP.
But yeah, I'm honestly a noob in way over my head.
I've had a new error on Odin attempting to flash.
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)​

if u can accses twrp just flash a rom and it should be good

First of all. What Samsung Firmware are you flashing, are you trying to downgrade to a older firmware version than what is already on there?
Try the latest samsung firmware and make sure it's suited for the model of your device.
Try another usb port and another microUSB cable. It is common for bad microUSB cables to make ODIN flash fail.

Help flashing stock ODIN file

Hi there,
I have a G930W8 (Canadian S7) that I am trying to flash a stock 7.0 ODIN file to, I have used ODIN several times without issue... but this time it doesn't seem to be working.
I downloaded the latest 7.0 from Sammobile, and put the respective files (BL/AP/CP/CSC) in their boxes, but everytime I try I get a FAIL message, and it seems to be only the BL that's causing it:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> param.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My device reads SW REV. CHECK FAIL. DEVICE: 3, BINARY: 2
The other files seem to work but when I reboot without flashing the BL I keep getting force closes.... I tried downloading the latest file twice to make sure it's not corrupted but it keeps happening, any ideas what it might be?

You're not trying to downgrade are you? I'm not 100% if it carried over into Oreo, but the last bootloader in 7.0 locked it from downgrading.

Beanvee7 said:
You're not trying to downgrade are you? I'm not 100% if it carried over into Oreo, but the last bootloader in 7.0 locked it from downgrading.
Click to expand...
Click to collapse
No I am not; but it appears I wasn't using the latest available version of 7.0, tried downloading from another source and it worked now, thanks.

Cryceratops said:
No I am not; but it appears I wasn't using the latest available version of 7.0, tried downloading from another source and it worked now, thanks.
Click to expand...
Click to collapse
thank you very much