Database Info

P6810 Odin fail

Hello guys,
i have problem with my P6810 16gb Wifi tablet, the problem started when i flashed CWM touch and then my touch screen stoped working so i tried to flash firmware and i got odin fail, from then when i turn it on it says "Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again"..
Odin message:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6810OZSLP8_P6810ZSLP8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
How can i fix this problem?
Cheers!!

bajki_ktm said:
Hello guys,
i have problem with my P6810 16gb Wifi tablet, the problem started when i flashed CWM touch and then my touch screen stoped working so i tried to flash firmware and i got odin fail, from then when i turn it on it says "Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again"..
Odin message:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6810OZSLP8_P6810ZSLP8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
How can i fix this problem?
Cheers!!
Click to expand...
Click to collapse
If you have kies installed in your computer, please try to disable or uninstalled it. As I know, Samsung KIES and ODIN could not get along with together....

cakrabayu said:
If you have kies installed in your computer, please try to disable or uninstalled it. As I know, Samsung KIES and ODIN could not get along with together....
Click to expand...
Click to collapse
I don't have installed KIES..

Sorry....Did you follow this guide while using odin? http://forum.xda-developers.com/showthread.php?t=1469635 just wondering why you encounterred a problem. Thx.
Sent from my GT-P6800

cakrabayu said:
Sorry....Did you follow this guide while using odin? http://forum.xda-developers.com/showthread.php?t=1469635 just wondering why you encounterred a problem. Thx.
Sent from my GT-P6800
Click to expand...
Click to collapse
I was doing everything like in tutorial, tablet was full charged and i got this error, that's the story..
What could possibly go wrong?

bajki_ktm said:
I was doing everything like in tutorial, tablet was full charged and i got this error, that's the story..
What could possibly go wrong?
Click to expand...
Click to collapse
Really sad about your problem bro.... something wrong with the procedure or your firmware.. there are many cases like you.. you can refer to :
http://androidforums.com/samsung-ga...help-firmware-flashing-failed-using-odin.html
http://forum.xda-developers.com/showthread.php?t=1877308&page=2
http://forum.xda-developers.com/showthread.php?t=1984717
http://forums.whirlpool.net.au/archive/1919243
but it is up to you to give it a try. Luckily for me, I did not encounter the same problem like yours while flashing with pc odin. I prefer using mobile odin. it is safe and easy. Good luck bro...

I am having the same issue on my P6810 (16gb). I cannot use the emergency recovery in Kies because I don't have the recovery code that it asks for (I bought the device as used faulty so don't know the update history). When I try to use the firmware upgrade / initialisation function to reset the tablet, Kies downloads the firmware but fails to connect to the tablet when I plug it in (in download mode, which I can access).
I have tried flashing a downloaded firmware using Odin3 v1.85 and it appears to start okay and copies cache.img but quickly hangs at the factoryfs.img stage.
I have tried different both win7x64 and winXP PCs with no success. I did try Heimdall, which uses a different USB driver, and while I did not have an appropriate Heimdall compatible firmware to flash, I was able to get a display of the current PIT information, so the tablet was communicating OK.
Does my device need repartitioning? I have seen many references to a PIT file, but don't know where to download it from.
This seems to be a common problem from what I can tell so far.
Any help appreciated.
Thanks.

Hello i have the same problem. I read all of your suggestions and guess that should be use a pit-file. Is this overwrite a system. I have troubled ROM compiled and want to install the new one downloaded from sammobiles fo my country. Am I right? Please help me?

[Q] Root attempt gone wrong

Hi All,
I've attempted to root my SM-900, using Odin 3.09 and followed all the usual steps.
Suddenly I got different coloured horizontal lines on screen and that probably means my attemp didn't go that well...
I've read I should go back to the original firmware using kies, and then try again.
So how do I restore the original firmware?
I have an image (.img) and understand I need samsung Kies.
Question: Do I use Kies or the new KIES3?
How to go from there?
Or is there another way to restore the firmware?
Thanks in advance!

I figured it out already....
I un-tar-red the recovery file. Leaving it as .tar solved the issue.

bricked
my tablet is stuck,tried different usb ports,different odins,different cables .gets stuck on set up connection,now all i get on screen is FIRMWARE UPGRADE ENCOUNTERED AN ISSUE

wolverinex66 said:
my tablet is stuck,tried different usb ports,different odins,different cables .gets stuck on set up connection,now all i get on screen is FIRMWARE UPGRADE ENCOUNTERED AN ISSUE
Click to expand...
Click to collapse
Please describe what is showing on tab's screen
Sent from my GT-S7562 using XDA Premium 4 mobile app

fixed
I was able to flash the stock recovery thanks

Had the same issues. Solved it by reinstalling the USB drivers. Via Kies 3, under the Tools menu. Worked perfectly after that. (Edit. ...for CFautoroot)
Sent from my SM-P900 using Tapatalk

Man that's gotta be a scary moment...
Sent from my SM-P900 using Tapatalk

Need advice
Frank_H said:
I figured it out already....
I un-tar-red the recovery file. Leaving it as .tar solved the issue.
Click to expand...
Click to collapse
I have the same problem... root failed with several colored line. and doesnt start anymore.
Can you explain to me what do you mean by "I un-tar-red the recovery file. Leaving it as .tar solved the issue." ?
Thank you

wilsto said:
I have the same problem... root failed with several colored line. and doesnt start anymore.
Can you explain to me what do you mean by "I un-tar-red the recovery file. Leaving it as .tar solved the issue." ?
Thank
Since the recovery image was downloaded as aan .tar file, which is a container file like .zip or.7z, I thought that I needed to unzip it.
You can mount the .tar file in Odin as it is, without unzipping it first.
You can find the recovery download location in the CF-root thread.
Click to expand...
Click to collapse

wilsto said:
I have the same problem... root failed with several colored line. and doesnt start anymore.
Can you explain to me what do you mean by "I un-tar-red the recovery file. Leaving it as .tar solved the issue." ?
Thank you
Click to expand...
Click to collapse
Mine did that after flashing a different firmware and trying to root. I solved it by first flashing the stock recovery in chainfires thread then rooting.
Sent from my SCH-I605 using XDA Premium 4 mobile app

Duly.noted said:
Mine did that after flashing a different firmware and trying to root. I solved it by first flashing the stock recovery in chainfires thread then rooting.
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yep me too..

I'm having this same problem. I downloaded CF-Auto-Root-v1awifi-v1awifixx-smp900.zip from download.chainfire.eu. I extracted the zip file, leaving me with a tar.md5 file. I try to flash that file, and end up with multicolor bars across the screen, exactly like if the video card dies on a mobile.
Here's what Odin has output as of when the error occurs. It flashes up a big red failed in the upper left box.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
So I flashed the original recovery from http://forum.xda-developers.com/showpost.php?p=50492301&postcount=234 and got a working but unrooted tablet. And I flashed CF with both 3.09 and 3.07, with a flash back to stock before each. Same thing every time-picture of a dying video card, except display is fine once flashed back to stock. Pic of the display added, on the off chance it helps.

Install Kies 3, then go into the Tools menu and reinstall the USB drivers. Reboot. Try auto root again. Should work on the first try.
Sent from my SM-P900 using Tapatalk

dodo99x said:
Install Kies 3, then go into the Tools menu and reinstall the USB drivers. Reboot. Try auto root again. Should work on the first try.
Sent from my SM-P900 using Tapatalk
Click to expand...
Click to collapse
I am having the same issue tried different computer with xp same result. Did you ever get it working or no? and if you did get working how?
---------- Post added at 08:39 AM ---------- Previous post was at 08:35 AM ----------
heldc said:
I'm having this same problem. I downloaded CF-Auto-Root-v1awifi-v1awifixx-smp900.zip from download.chainfire.eu. I extracted the zip file, leaving me with a tar.md5 file. I try to flash that file, and end up with multicolor bars across the screen, exactly like if the video card dies on a mobile.
Here's what Odin has output as of when the error occurs. It flashes up a big red failed in the upper left box.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
So I flashed the original recovery from http://forum.xda-developers.com/showpost.php?p=50492301&postcount=234 and got a working but unrooted tablet. And I flashed CF with both 3.09 and 3.07, with a flash back to stock before each. Same thing every time-picture of a dying video card, except display is fine once flashed back to stock. Pic of the display added, on the off chance it helps.
Click to expand...
Click to collapse
I am having the same issue tried different computer with xp same result. Did you ever get it working or no? and if you did get working how?

paulskerr said:
I am having the same issue tried different computer with xp same result. Did you ever get it working or no? and if you did get working how?
Click to expand...
Click to collapse
I did. I did the uninstaller for the USB drivers several times, with no luck. So finally I just deleted the Samsung folders in program files and program files x86. I did not reinstall Kies, just the USB drivers from samsung.com. I used odin 3.09, and it went flawlessly. Well, mostly-wifi took a *long* time to reconnect the first time after boot, but I'd also installed the update just before rooting, so dunno if it was the rooting or the update.

heldc said:
I did. I did the uninstaller for the USB drivers several times, with no luck. So finally I just deleted the Samsung folders in program files and program files x86. I did not reinstall Kies, just the USB drivers from samsung.com. I used odin 3.09, and it went flawlessly. Well, mostly-wifi took a *long* time to reconnect the first time after boot, but I'd also installed the update just before rooting, so dunno if it was the rooting or the update.
Click to expand...
Click to collapse
I finally go also. I did exactly what you did. Thank you

Frank_H said:
Hi All,
I have an image (.img) and understand I need samsung Kies.
Click to expand...
Click to collapse
Where do I get this image?

How many are remembering to unhide developer options and then select usb debugging? The moment I did that everything worked

Whwre did you find the USB drivers on samsung.com? When selecting the SM-P900 it does not offer any for download.

heldc said:
I'm having this same problem. I downloaded CF-Auto-Root-v1awifi-v1awifixx-smp900.zip from download.chainfire.eu. I extracted the zip file, leaving me with a tar.md5 file. I try to flash that file, and end up with multicolor bars across the screen, exactly like if the video card dies on a mobile.
Here's what Odin has output as of when the error occurs. It flashes up a big red failed in the upper left box.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
So I flashed the original recovery from http://forum.xda-developers.com/showpost.php?p=50492301&postcount=234 and got a working but unrooted tablet. And I flashed CF with both 3.09 and 3.07, with a flash back to stock before each. Same thing every time-picture of a dying video card, except display is fine once flashed back to stock. Pic of the display added, on the off chance it helps.
Click to expand...
Click to collapse
So this happened to me, and this is my first time rooting. I have the tar file for recovery. How do I proceed? I haven't unplugged my note pro, can I just put in the new file in the pda and start, or do I need to restart odin? Really kind of worried...

[Q] [HELP] GT-N8013 - Soft Bricked(ODIN MODE ONLY)

GT-N8013
Blue/Gray
16GB Wifi Only Model
I was watching a youtube video, my tablet froze for an hour, died, then I let it charge and it rebooted into the samsung logo. After that it decided to go white screen and goes to a white screen every time it's booted. I've been trying to resolve this on my own with various resources for about a month now.
I can get to ODIN mode no problem, but I can't flash anything. I have recently bought a new OEM Samsung USB cable and tried multiple versions of ODIN on two different machines. Directly connected to the motherboard and not USB 3.0 ports.
I think the solution to my problem may be answered:
Here: http://forum.xda-developers.com/showthread.php?t=2268735
or
Here: http://forum.xda-developers.com/showthread.php?t=2713297
It is hard for me to comprehend the English used in the first link as I think Authors first language is not English. I think what he is saying is that if ODIN is not working then you have to flash the PIT file via adb and a SD card, but I cannot access Recovery, and I don't recall fully how to use ADB in Downloading Mode, if that's possible at all. He also states I may need to downgrade my bootloader version based on the last ROM that I had on my tablet. If someone could educate me on that I'd appreciate it.
The 2nd link says I need the stock firmware for my country(I live in the U.S. of A.) and to nand erase all but I feel like that should be used as a last resort. I did download both N8013UEALI3(4.0.4) & N8013UEUCMI3(4.1.2) from sammobile.com though.
When I try to flash just a Recovery/ROM, with Autoreboot checked, I get the PIT error message below:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8013UEALI3_N8013XARALI3_1081475_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
When I try to flash a PIT by its self, with Auto Reboot & Re-partition checked, I get the error message:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When I try to flash a PIT by its self, Re-partition checked, I get the error message:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
When I try to flash a PIT w/ Recovery/ROM, Re-partition Checked and Auto-Reboot checked, I get:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8013UEALI3_N8013XARALI3_1081475_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Any assitance would be greatly appreciated, I've been without my tablet for a month now. I have any backup, I don't recall the ROM I flashed because it was so long ago, but I'm pretty sure the version was Jellybean. I know my recoevry was one of the later CWM TouchScreen Rom recoverys but I can't recall the version. Thanks for any help, please let me know what information I'm lacking or what I can do, thank you all for your time.

Update
Any assistance would be greatly appreciated. I have tried to different PIT files for the PIT mapping and they both failed. Getting pretty desperate now. I can't even NAND Erase All, I gave that a shot and it failed:
When I select NAND Erase All, stock rom(4.0.4 or 4.1.2), Pit, & Re-Partition checked, Nand Erase all Checked, I get the following in ODIN 3.07 and 3.09:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8013UEALI3_N8013XARALI3_1081475_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Erase...
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm starting to think its the ECCM and maybe I need a JTAG repair. Like I said before, I can't get into recovery, I just get a all white screen. When the tablet first died I got the Samsung logo and then it rebooted and went White, I never got the Samsung logo again. Any help please? Even if it's just recommendations for trusted JTAG repair sites, because I don't trust the ones I've found ths far. Or know PIT files that have worked for flashing on the N8013. Anything at all.

BUMP
I found this article here: http://www.sammobile.com/forum/showthread.php?t=23562
Exact same problem I am having, I think I'm going to need a JTAG repair. I just posted a request to get some fresh PIT files from multiple android versions. I ill keep posting updates on how this is going, I feel alone in this issue since no one has said anything but I get multiple views...but I see more and more people are starting to post in the help section for this particular brand of tablet in the past 3-5months, it sounds terrible but I'm glad I'm not alone since I feel like im talking to myself here.
Just contacted Mobiletechvideos guys, I hope they are legit. I'm will to pay $50 for a jtag repair if i can have this tablet back.

onlysafonne said:
I found this article here: http://www.sammobile.com/forum/showthread.php?t=23562
Exact same problem I am having, I think I'm going to need a JTAG repair. I just posted a request to get some fresh PIT files from multiple android versions. I ill keep posting updates on how this is going, I feel alone in this issue since no one has said anything but I get multiple views...but I see more and more people are starting to post in the help section for this particular brand of tablet in the past 3-5months, it sounds terrible but I'm glad I'm not alone since I feel like im talking to myself here.
Just contacted Mobiletechvideos guys, I hope they are legit. I'm will to pay $50 for a jtag repair if i can have this tablet back.
Click to expand...
Click to collapse
@onlysafonne what file fails? I see your log above

carl1961 said:
@onlysafonne what file fails?
Click to expand...
Click to collapse
I've tried to use both ODIN & Heimdall. All files are failing for me. I tried stock 4.0.4 & 4.1.2 Roms, 3 different PIT files, I even tried to NAND erase all with a stock rom and ODIN continues to fail for me. I installed a virutal box on multiple machines running XP SP3 since windows 7/8 weren't working for me as well, that failed as well. When I try to flash the PIT files I get the output from ODIN in my OP, nothing is working for me. I'm just thinking I experienced instant death on this tablet for no reason at all. The most success i've had is with Heimdall just being able to reboot the tablet for me and then go back to Downloading mode, but nothing else is responding for me.
I'f I can get some fresh pit files from fully operational devices I will know that I've done everything I can excluding JTAG repair myself. If I can't get some fresh PIT files from multiple android versions, then I might just have to send it to the Mobiletechvideos guys to see if they can repair.
Thanks for the reply and interest in my issue!

onlysafonne said:
I've tried to use both ODIN & Heimdall. All files are failing for me. I tried stock 4.0.4 & 4.1.2 Roms, 3 different PIT files, I even tried to NAND erase all with a stock rom and ODIN continues to fail for me. I installed a virutal box on multiple machines running XP SP3 since windows 7/8 weren't working for me as well, that failed as well. When I try to flash the PIT files I get the output from ODIN in my OP, nothing is working for me. I'm just thinking I experienced instant death on this tablet for no reason at all. The most success i've had is with Heimdall just being able to reboot the tablet for me and then go back to Downloading mode, but nothing else is responding for me.
I'f I can get some fresh pit files from fully operational devices I will know that I've done everything I can excluding JTAG repair myself. If I can't get some fresh PIT files from multiple android versions, then I might just have to send it to the Mobiletechvideos guys to see if they can repair.
Thanks for the reply and interest in my issue!
Click to expand...
Click to collapse
no I got the pit file from here http://forum.xda-developers.com/showthread.php?p=41158546#post41158546
tell me how to grab it and I will get it from my tablet now for you

Heimdall
carl1961 said:
no I got the pit file from here http://forum.xda-developers.com/showthread.php?p=41158546#post41158546
tell me how to grab it and I will get it from my tablet now for you
Click to expand...
Click to collapse
To download a copy of your PIT all you have to do is install Heimdall, with zadig driver (Samsung/General Device) , boot your tablet into Download mode, and download a copy of your PIT by going to Heimdall Frontend, clicking utilites, and downloading and saving your PIT to your desktop(or where ever you want) and uploading it for me.
Heimdall can be found here: http://glassechidna.com.au/heimdall/
After you are down with Heimdall, make sure you uninstall the driver from "Device Manager" in your USB Devices, that way, you can use ODIN again. A;; of this should only take about 5-10mins, as all the files are really small. i really appreciate this.

onlysafonne said:
To download a copy of your PIT all you have to do is install Heimdall, with zadig driver (Samsung/General Device) , boot your tablet into Download mode, and download a copy of your PIT by going to Heimdall Frontend, clicking utilites, and downloading and saving your PIT to your desktop(or where ever you want) and uploading it for me.
Heimdall can be found here: http://glassechidna.com.au/heimdall/
After you are down with Heimdall, make sure you uninstall the driver from "Device Manager" in your USB Devices, that way, you can use ODIN again. A;; of this should only take about 5-10mins, as all the files are really small. i really appreciate this.
Click to expand...
Click to collapse
@onlysafonne
ok I did it also a compair to My-N8013.pit that you said did not work, they or identical so that may be bad news for you.
thread
http://forum.xda-developers.com/showthread.php?t=1916936
PIT Magic v1.3.10 - Samsung PIT Creator, Editor, Analyzer

carl1961 said:
@onlysafonne
ok I did it also a compair to My-N8013.pit that you said did not work, they or identical so that may be bad news for you.
thread
http://forum.xda-developers.com/showthread.php?t=1916936
PIT Magic v1.3.10 - Samsung PIT Creator, Editor, Analyzer
Click to expand...
Click to collapse
Thank you for this post, that helps me alot, it appears it is beyond recovery via ODIN at this point. Thank you for taking the time to compare your PIT to the previous one. I will wait for Mobiletech to contact me back and post an update from there.

onlysafonne said:
Thank you for this post, that helps me alot, it appears it is beyond recovery via ODIN at this point. Thank you for taking the time to compare your PIT to the previous one. I will wait for Mobiletech to contact me back and post an update from there.
Click to expand...
Click to collapse
if you not under warenty I would maybe buy a used one on ebay that might just have a cracked screen, you might even find a 32GB one
http://www.ebay.com/itm/Samsung-Galaxy-Note-10-1-32-GB-Wi-Fi-GT-N8013-/361155880699?pt=US_Tablets&hash=item54169166fb

onlysafonne said:
Thank you for this post, that helps me alot, it appears it is beyond recovery via ODIN at this point. Thank you for taking the time to compare your PIT to the previous one. I will wait for Mobiletech to contact me back and post an update from there.
Click to expand...
Click to collapse
onlysafonne, I have the same problem. I can use Odin and get to CWM but nothing I flash will get me past the Samsung Galaxy Note 10.1 image I cannot even get it to shut off. It will go black then power right back up.
I have flashed with Nand Erase All checked only
KIES_HOME_N8013UEUCMI3_N8013XARCMI3_813049_REV00_u ser_low_ship.tar
Any ideas? I have not heard of JTAG

I have a N8010 and I'm also in this kind of bootloop.
Nothing works.
I had OmniRom 4.4.4 installed and the newest TWRP.
I only can get into Download Mode.
When I try to get into Recovery the blue TWRP Screen pops up for a second and then it's going back to "Samsung Galaxy Note 10.1" Logo.
I even tried to disassemble the battery. But this didn't work either.
Any ideas what I can do? If not, I'll have to take it to repair. Got some warranty left, but I rather fix it myself.
Thanks

Flying_Phil said:
I have a N8010 and I'm also in this kind of bootloop.
Nothing works.
I had OmniRom 4.4.4 installed and the newest TWRP.
I only can get into Download Mode.
When I try to get into Recovery the blue TWRP Screen pops up for a second and then it's going back to "Samsung Galaxy Note 10.1" Logo.
I even tried to disassemble the battery. But this didn't work either.
Any ideas what I can do? If not, I'll have to take it to repair. Got some warranty left, but I rather fix it myself.
Thanks
Click to expand...
Click to collapse
have you tryed to odin install your firmware? usally the bootloop is caused because you need to do a factory reset to get rid of (in your case OmniRom 4.4.4) your firmware as I see is http://www.sammobile.com/firmwares/confirm/31427/N8010XXUDNE4_N8010BTUDNF1_BTU.zip/

Yes, I did try that. Is still in bootloop afterwards. I also tried to flash stock recovery or cwm recovery. But there is still twrp.
I can't open your link :-/

Flying_Phil said:
Yes, I did try that. Is still in bootloop afterwards. I also tried to flash stock recovery or can recovery. But there is still twrp.
I can't open your link :-/
Click to expand...
Click to collapse
try this N8010 recovery with the included 3.07 odin put in PDA slot and do no check re-partiton look at picture
@Flying_Phil
yes samfirmware is picky go here and search your N8010 you most likly need to signup (it's free) and as you see most odin updates or "home" which means it does not do a factory reset which is ok if your updating a stock unrooted rom so you need to do a factory reset when coming from a custom rom.

well I tried to flash your attached file. Odin said "Pass!" but my Tablet still does the bootloop.
Like I said, I tried to flash several firmwares. All with this same result. First I tried the German version, then the Austrian and the Australian.
Now yours was the version for new zealand.
I have no clue, why this doesn't work.
Here is the log from Odin and I attached a screenshot.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_N8010XXUDNK1_N8010NZCDNK1_Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!

Flying_Phil said:
well I tried to flash your attached file. Odin said "Pass!" but my Tablet still does the bootloop.
Like I said, I tried to flash several firmwares. All with this same result. First I tried the German version, then the Austrian and the Australian.
Now yours was the version for new zealand.
I have no clue, why this doesn't work.
Here is the log from Odin and I attached a screenshot.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_N8010XXUDNK1_N8010NZCDNK1_Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
Click to expand...
Click to collapse
ok so did you try and reboot to stock recovery and do a factory reset

carl1961 said:
ok so did you try and reboot to stock recovery and do a factory reset
Click to expand...
Click to collapse
sorry, I forgot to tell about it.
Yes I tried to go into Recovery, but there ist still TWRP on it and it still crashes after a second.
I even tried the flash without checking "Auto reboot", so I could boot directly into recovery, but it worked neither.

Flying_Phil said:
sorry, I forgot to tell about it.
Yes I tried to go into Recovery, but there ist still TWRP on it and it still crashes after a second.
I even tried the flash without checking "Auto reboot", so I could boot directly into recovery, but it worked neither.
Click to expand...
Click to collapse
ok lets backtrack
what is your tablets stock info? and or you 16 GB or 32 GB

carl1961 said:
ok lets backtrack
what is your tablets stock info? and or you 16 GB or 32 GB
Click to expand...
Click to collapse
GT-N8010 16GB. Need more?

Need some help plez.

Ok so yesterday I recieve this phone in my store, Galaxy s6 Edge. Customer donates no charge. I root phone last night. Accepted the OTA but didn't install. the phone acts weird last night, goes to black screen after sleep. etc etc. I go to restart phone this AM and it says FAP LOCK ON. Not sure if i messed with something in the development settings or what not. So i Download stock SPR-G925PVPU1AOCF-20150415164450.zip
I try to flash using ODIN. Phone shows up "SW REV. Check Fail Device 2, Binary :1" I am so lost and confused. :

melston1987 said:
Ok so yesterday I recieve this phone in my store, Galaxy s6 Edge. Customer donates no charge. I root phone last night. Accepted the OTA but didn't install. the phone acts weird last night, goes to black screen after sleep. etc etc. I go to restart phone this AM and it says FAP LOCK ON. Not sure if i messed with something in the development settings or what not. So i Download stock SPR-G925PVPU1AOCF-20150415164450.zip
I try to flash using ODIN. Phone shows up "SW REV. Check Fail Device 2, Binary :1" I am so lost and confused. :
Click to expand...
Click to collapse
Why root then try to download an OTA? You cant install an OTA if you are rooted. It has to be totally untouched stock rom/boot partition, etc.
Not sure what issue you may have created. You should have only DOWNLOADED The OTA files to be stored. It sounds like no installation was initiated. It likely would have errored out on you and said OTA could not be applied had you been rooted. Perhaps the OS later auto-installed the OTA updated and causes this issue. There is relevant discussion to this same error here: http://forum.xda-developers.com/showthread.php?t=2489980
Sounds like you soft-bricked it in which case its a pretty easy fix. See here: http://forum.xda-developers.com/showthread.php?t=2483380
btw, all of this takes 5 seconds of searching. :crying:

Alpine- said:
Why root then try to download an OTA? You cant install an OTA if you are rooted. It has to be totally untouched stock rom/boot partition, etc.
Not sure what issue you may have created. You should have only DOWNLOADED The OTA files to be stored. It sounds like no installation was initiated. It likely would have errored out on you and said OTA could not be applied had you been rooted. Perhaps the OS later auto-installed the OTA updated and causes this issue. There is relevant discussion to this same error here: http://forum.xda-developers.com/showthread.php?t=2489980
Sounds like you soft-bricked it in which case its a pretty easy fix. See here: http://forum.xda-developers.com/showthread.php?t=2483380
btw, all of this takes 5 seconds of searching. :crying:
Click to expand...
Click to collapse
where is pit for this phone?

melston1987 said:
where is pit for this phone?
Click to expand...
Click to collapse
SPR-G925PVPU2BOF7-20150702235910.zip - Upple.it
it seems to be progressing...half way through. FINGERS crossed:good:

melston1987 said:
SPR-G925PVPU2BOF7-20150702235910.zip - Upple.it
it seems to be progressing...half way through. FINGERS crossed:good:
Click to expand...
Click to collapse
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925PVPU2BOF7_G925PSPT2BOF7_G925PVPU2BOF7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> cache.img
<ID:0/004> modem.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!

melston1987 said:
where is pit for this phone?
Click to expand...
Click to collapse
Where did you get the PIT file?

Stuck at boot and unable to change anything!

I have an old 8013 Note 10.1 that I let my kids use, it's had CM on it forever and no issues until recently. Now it boots up to the CM bootscreen but doesn't go any further. I've booted to TWRP and tried to format and install a new ROM but it doesn't seem to even format. When I go to load a new ROM it always shows that the internal storage is the same free space (something like 513Mb). I've tried flashing PhilzTouch, TWRP, CWM, and when I reboot to recover it's still the same version of TWRP I started with. Tried flashing a stock ROM, still boots to the CM Logo. Loaded ODIN on my computer and tried flashing a stock image using ODIN and it shows it's successful, but nothing changes on the tablet. I even tried the instructions listed in this post, which should reformat everything and still - same issue.
I've attached a few screenshots of the kinds of errors and messages I get in TWRP when I try to format, do an advanced wipe of everything and still a new ROM. Any suggestions would be great! I'm ready to give up on this thing, but I still have a sliver of hope.

Re install your oriGinal frimware
Sent from my SM-J700F using Tapatalk

saismarty said:
Re install your oriGinal frimware
Sent from my SM-J700F using Tapatalk
Click to expand...
Click to collapse
As I think I mentioned, I've tried. Just to be clear I've added some screenshots and output from ODIN.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8013UEUCOI1_N8013XARCOI1_813049_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> tz.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Looks like everything is flashing just fine... until I reboot the tablet and get the CM Boot logo again and the tablet just gets stuck there...

What happened next
Sent from my SM-J700F using Tapatalk

saismarty said:
What happened next
Sent from my SM-J700F using Tapatalk
Click to expand...
Click to collapse
Cyanogenmod boot animation and just stuck there... just like ODIN never happened.

Try doing Odin but check Nand erase all, if you know what that does it should wipe what's holding your tablet back and then flash stock firmware, just hope it works, I don't know anything else really