Database Info

[Q] Odin and phone semi-bricked?

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T959VUVKH1-REV00-home-low-CL455466.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> modem.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I tried so many times to complete this tutorial:
http://forum.xda-developers.com/showthread.php?t=1215748
At Step 8 that happens... Complete (Write) operation failed.
Now my phone don't get on. When it turn on just say Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Im very scared because this is not my phone. Im just doing a favor to a friend.
Pleas guys help me to get this phone back. I was just trying to get GB to it.
Thanks for reading!

Omarpr said:
I tried so many times to complete this tutorial:
http://forum.xda-developers.com/showthread.php?t=1215748
At Step 8 that happens... Complete (Write) operation failed.
Now my phone don't get on. When it turn on just say Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Im very scared because this is not my phone. Im just doing a favor to a friend.
Pleas guys help me to get this phone back. I was just trying to get GB to it.
Thanks for reading!
Click to expand...
Click to collapse
what are you trying to flash? (GB or a Froyo Rom?)
ps dont worry you can save the phone ive gone through that firmware issue a million times

he is trying to flash kh1.
odin to the kg4 leak by whitehawk first. then cwm flash the kh1 leak.

Hey Bud I had this very same problem and if you use odin again and flash to the kc1 or kd1 while on that screen that says use kies recovery mode it will flash in that mode as well. I'm guessing that is also a dl screen

Getting Galaxy Ace GT-5839i back to stock

I tried putting on the jellyblast rom for the GT-5830i onto this phone (I heard they have the same hardware) but unfortunately it did not go so well and now the phone hangs at the Galaxy Ace logo screen. So now the problem is getting the stock firmware back onto the phone - I have downloaded the Vodafone stock firmware for the phone (UK) from sammobile.com and tried to flash it with Odin.
I have tried with Odin v1.85 and v1.87 although they both fail:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBULK1_S5839iVODLE1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am using the totoro_0623 pit file as per this thread: http://forum.xda-developers.com/showthread.php?t=1811196 and then just using the PDA file. I check the Re-Partition, Auto Reboot and F. Reset Time boxes when I attempt this.
I found another method also using Kies through "Firmware upgrade and initialization" - I add "GT-S5839i" as the model name (which it accepts) and my S/N but then it complains that "the model information that you have entered cannot be verified; the device initialization cannot proceed".
I am at a loss as to what to do now, tried using the back ports on my desktop and the supplied USB cable to no avail. Any help would be greatly appreciated!
Additionally, in recovery it mentions that it fails to mount /system, and rfs format fails when wiping data and cache whilst in recovery.

ornottin are
With a different cable it gets to the modem part of the flashing then bsod's my computer with pfn_list_corrupt (happened twice in a row at the same point). What is going on here?

Problem solved, google "Galaxy Ace S5830i Flasher& PIT file 100%work" if you have the same issues as me.

Can not flash official firmware

Hello,
I want to flash to G920FXXU1AOD4 from G920FXXU1AOE3.
I tried to use Odin 1.85 and 3.04.
This is the error that I'm getting in Odin 1.85:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOD4_G920FOJK1AOD4_G920FXXU1AOCZ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Why can't I flash to this firmware?
Help...

r'n'b said:
Hello,
I want to flash to G920FXXU1AOD4 from G920FXXU1AOE3.
I tried to use Odin 1.85 and 3.04.
This is the error that I'm getting in Odin 1.85:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOD4_G920FOJK1AOD4_G920FXXU1AOCZ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Why can't I flash to this firmware?
Help...
Click to expand...
Click to collapse
Did you turn on USB DEBUGGING?

Hello again
I had the same problem with flashing rom with odin... I found a solution and explained it how to fix mine...
I hope it be helpful
http://forum.xda-developers.com/galaxy-s6/help/help-odin-stuck-start-write-nand-t3127992

k2evil said:
Hello again
I had the same problem with flashing rom with odin... I found a solution and explained it how to fix mine...
I hope it be helpful
http://forum.xda-developers.com/galaxy-s6/help/help-odin-stuck-start-write-nand-t3127992
Click to expand...
Click to collapse
Ok... I Solved my problem finally... I spent almost 3 days in forums to find a solution... So i give you guys a summary what I do:
1) Find my phone's pit file according to model and storage capacity (Mine is G920F 32GB)
2)Then the trick is use ODIN V3.10.6 insist of V3.09... http://forum.xda-developers.com/showthread.php?t=2711451
3)If you face with hidden.img problem, extract the rom's file and rename the file hidden.img to hidden.img.tar and flash it by ODIN (Put this file on AP)...
Wait for some minutes and there is where magic happens
Click to expand...
Click to collapse
I don't understand your solution.
What do I need to do with the pit file?
My device is also G920F 32GB.
The USB DEBUGGING is on.

r'n'b said:
I don't understand your solution.
What do I need to do with the pit file?
My device is also G920F 32GB.
The USB DEBUGGING is on.
Click to expand...
Click to collapse
I heard from someone that Stucking in Start Write NAND is because of pit file...
but forget about it.. try without pit file. download the lastest odin v 3.10
usually process fails when it try to flash hidden.img... if it happen for you, do the 3th step

k2evil said:
I heard from someone that Stucking in Start Write NAND is because of pit file...
but forget about it.. try without pit file. download the lastest odin v 3.10
usually process fails when it try to flash hidden.img... if it happen for you, do the 3th step
Click to expand...
Click to collapse
Finally I managed to flush the ROM
Odin3_v3.10.6 did the job.
Thanks!

Your welcome buddy... just don't forget to hit the thank button

Any Possible Solution for my GT-P3100 "firmware upgrade encountered an issue"?

Any Possible Solution for my GT-P3100 "firmware upgrade encountered an issue"?
My P3100 gave up on me about a month ago. It was just stuck with "Samsung galaxy tab 2" on the screen. I tried rebooting many times with no success. I read so many threads and tried many alternatives using Odin but my tablet is still not responsive. Currently, it will just have the "firmware upgrade encountered an issue" message until the battery runs out. Pressing buttons won't get to download mode.
I was so disappointed for not finding any solution that I gave up searching for 2 weeks. Now I am giving it one last shot with proper guides before I throw it to the trash.
If anyone can spare me some time, this is roughly what I had been doing:
- Odin3 (versions 07, 09, 1.85, 10.6, 10.7)
- Firmwares from Sammobile (India, China versions)
- universal roots for galaxy tab2
- CWM_ROOT_P3100.tar.md5
- CF-Auto-Root-espressorf-espressorfxx-gtp3100
- I tried through Kies but it won't recognize the device, and "firmware upgrade and initialization" returns "GT-P3100" does not support initialization"
- Remove Kies, block antivirus, switch usb cables and usb ports!
All of this was done desperately, randomly, and with lot of frustration.
Now I am hoping that someone can guide me for one last chance. And I am willing to try anything regardless of the outcome.
Thanks in Advance!
Sibson

Will I ever get any attention? I am still struggling alone in the darkness, stumbling from here to there, but I still believe there gotta be someone out there who will have a bit of care for my concerns. I randomly got that far with my p3100:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3100_JB_SBL.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> Sbl.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
But even though it renders a success, the screen still shows the "firmware upgrade encountered an issue..." message. So I tried again with another tar file and got the same thing:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-espressorf-espressorfxx-gtp3100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
"Firmware upgrade encountered an issue..." message still comes back.
Can you tell me anything about this? Please? Really begging now? :crying: ?

Don't run KIES or any KIES service in background while using Odin.

Android-Andi said:
Don't run KIES or any KIES service in background while using Odin.
Click to expand...
Click to collapse
Thanks for the reply. I have killed all Kies processes in the background but there is no change.

Uninstall KIES and reboot. Make sure keeping the drivers.
Start odin as administrator.
Connect your tab being on the issue screen ("Black Screen of death" - in case you like to search some more). On this screen, dlmode is running in background automatically.
Now make sure using the right rom for your device and use odin to flash it.
Good luck!

Android-Andi said:
Uninstall KIES and reboot. Make sure keeping the drivers.
Start odin as administrator.
Connect your tab being on the issue screen ("Black Screen of death" - in case you like to search some more). On this screen, dlmode is running in background automatically.
Now make sure using the right rom for your device and use odin to flash it.
Good luck!
Click to expand...
Click to collapse
I have followed the procedure but I still get no change:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3100DDCNA3_P3100ODDCNB1_P3100DDCLK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> recovery.img
<ID:0/005> MLO
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> modem.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
The tablet turns off after <ID:0/005> RES OK. I wait but it does not reboot. When I press the power button, the same "Firmware upgrade encountered an issue" shows up. I tried with 3 other rooms but ends the same.
I want to point out that my P3100 is the international version. Is there any specific recommendations?

Bad emmc? Could be the reason for bootloop too...

Android-Andi said:
Bad emmc? Could be the reason for bootloop too...
Click to expand...
Click to collapse
Thanks for that point. I was hoping to find a way to troubleshoot the emmc but couldn't find any. And if the emmc is at fault I guess there is nothing I can do.
The only update is that when I start Odin flash, the tab screen shows a bue progress bar but doesn't go all the way even though Odin says " PASS". I have attached a pic, in case any other possibility comes in mind.
https://www.dropbox.com/sh/oyq71eb1rqcbak4/AAArGKrWaWh5l7_4zILRIHCRa?dl=0
Thanks for your time. I will just keep surfing for possibilities and will update you if I get any solution.

You could try flashing an older stock rom, maybe 4.1 or 4.0.3

Hi Android-Andi,
I haven't gotten any solution but I got few changes. Thought I should share them in case it can bring some leads.
After all the failures I tried things randomly and I decided to flash the PIT. I used 3 pits from different sources but all failed with "there is no PIT partition".
Then I decided to use files from other models to flash. I downloaded a PIT file for Tab3 7.0 3G.
This also failed, but strangely the device was able to boot to "Samsung Galaxy Tab2 7.0" and nothing else (Pic. 1). I tried the buttons and was able to get real download mode for the first time (Pic. 2 &3).
Link to the pictures: https://www.dropbox.com/sh/oyq71eb1rqcbak4/AAArGKrWaWh5l7_4zILRIHCRa?dl=0
Even though I already flashed many times with odin "PASS", I noticed that the download mode screen says this:
PRODUCT NAME: GT-P3100
CUSTOM BINARY: NO
CURRENT BINARY: SAMSUNG_OFFICIAL
I tried to flash again with "PASS" but still the same.
So I guess that the old system is still inside with no change, and probably blocking the flashing procedure.
Now, my question is whether there is an option in odin to force and wipe everything before I flash.

sibson said:
I tried to flash again with "PASS" but still the same.
So I guess that the old system is still inside with no change, and probably blocking the flashing procedure.
Now, my question is whether there is an option in odin to force and wipe everything before I flash.
Click to expand...
Click to collapse
This (and your other symptoms) is consistent with a bricked emmc.
However, if that is not the case, you could try flashing it from linux using heimdall. I believe that has a wipe option.

I think you can go to recovery mode and do a factory reset and wipe cache. If nt there are ways in which you can flash a custom rom through odin and try going to stock firmware using odin now.

Can't load J700p into bootloader

So i recently flashed lineage 14.1 j7ltespr to my J700p, and the rom loaded up fine, but it won't recognize the sim card. As this is my daily driver that can't be the case, so i tried to flash a stock rom back on. I think i could get it to work, but the phone won't boot into bootloader anymore.
It has the most recent version of twrp for the model. And it will system boot, and boot recovery just fine. But when i try to boot loader, it just gives me a charging symbol, and freezes. I've been trying to fix this anyway i can for the last 12 hours.
I also tried adb, and odin. Odin gives me an auth error every time i try to load a stock rom. If anyone could help, i'd be very appreciative.
I'd take fixing the sim not found, the bootloader not coming up, or the NAND Write Start!! FAIL! (Auth) error
thank you for your time

J700P
tjjc4 said:
So i recently flashed lineage 14.1 j7ltespr to my J700p, and the rom loaded up fine, but it won't recognize the sim card. As this is my daily driver that can't be the case, so i tried to flash a stock rom back on. I think i could get it to work, but the phone won't boot into bootloader anymore.
It has the most recent version of twrp for the model. And it will system boot, and boot recovery just fine. But when i try to boot loader, it just gives me a charging symbol, and freezes. I've been trying to fix this anyway i can for the last 12 hours.
I also tried adb, and odin. Odin gives me an auth error every time i try to load a stock rom. If anyone could help, i'd be very appreciative.
I'd take fixing the sim not found, the bootloader not coming up, or the NAND Write Start!! FAIL! (Auth) error
thank you for your time
Click to expand...
Click to collapse
Can you go into settings an turn off adb root then you should be able to flash stock from Odin ! Use Odin 3.12.5 !!

peter couniaz said:
Can you go into settings an turn off adb root then you should be able to flash stock from Odin ! Use Odin 3.12.5 !!
Click to expand...
Click to collapse
Thank you peter for the advice. I tried what you suggested. Still no luck. Here is the output of the odin runs, they were all identical though i tried different roms, 3 different versions of odin, root on and off, as well as with debugging on and off. Same out put every time.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 2970 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also the output on the download screen on the phone throws this error
SW REV CHECK FAIL : [aboot] Fused 2 > Binary 1
I hope that helps.

J700P
tjjc4 said:
Thank you peter for the advice. I tried what you suggested. Still no luck. Here is the output of the odin runs, they were all identical though i tried different roms, 3 different versions of odin, root on and off, as well as with debugging on and off. Same out put every time.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 2970 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also the output on the download screen on the phone throws this error
SW REV CHECK FAIL : [aboot] Fused 2 > Binary 1
I hope that helps.
Click to expand...
Click to collapse
It all or nothing on this if you can get into recovery factory reset then wipe system an go into download mod an try Odin one last time ! But before all that make shore debugging is on an make shore you are using a Samsung usb cord best the one that came with the phone ! An use Odin 3.12.5 or older 3.13.01 doesn't work right for that phone !!! PS make the firmware file isn't mest up ! Get the latest firmware file !