<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T959VUVKH1-REV00-home-low-CL455466.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> modem.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I tried so many times to complete this tutorial:
http://forum.xda-developers.com/showthread.php?t=1215748
At Step 8 that happens... Complete (Write) operation failed.
Now my phone don't get on. When it turn on just say Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Im very scared because this is not my phone. Im just doing a favor to a friend.
Pleas guys help me to get this phone back. I was just trying to get GB to it.
Thanks for reading!
Omarpr said:
I tried so many times to complete this tutorial:
http://forum.xda-developers.com/showthread.php?t=1215748
At Step 8 that happens... Complete (Write) operation failed.
Now my phone don't get on. When it turn on just say Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Im very scared because this is not my phone. Im just doing a favor to a friend.
Pleas guys help me to get this phone back. I was just trying to get GB to it.
Thanks for reading!
Click to expand...
Click to collapse
what are you trying to flash? (GB or a Froyo Rom?)
ps dont worry you can save the phone ive gone through that firmware issue a million times
he is trying to flash kh1.
odin to the kg4 leak by whitehawk first. then cwm flash the kh1 leak.
Hey Bud I had this very same problem and if you use odin again and flash to the kc1 or kd1 while on that screen that says use kies recovery mode it will flash in that mode as well. I'm guessing that is also a dl screen
Related
Hello guys,
i have problem with my P6810 16gb Wifi tablet, the problem started when i flashed CWM touch and then my touch screen stoped working so i tried to flash firmware and i got odin fail, from then when i turn it on it says "Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again"..
Odin message:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6810OZSLP8_P6810ZSLP8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
How can i fix this problem?
Cheers!!
bajki_ktm said:
Hello guys,
i have problem with my P6810 16gb Wifi tablet, the problem started when i flashed CWM touch and then my touch screen stoped working so i tried to flash firmware and i got odin fail, from then when i turn it on it says "Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again"..
Odin message:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6810OZSLP8_P6810ZSLP8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
How can i fix this problem?
Cheers!!
Click to expand...
Click to collapse
If you have kies installed in your computer, please try to disable or uninstalled it. As I know, Samsung KIES and ODIN could not get along with together....
cakrabayu said:
If you have kies installed in your computer, please try to disable or uninstalled it. As I know, Samsung KIES and ODIN could not get along with together....
Click to expand...
Click to collapse
I don't have installed KIES..
Sorry....Did you follow this guide while using odin? http://forum.xda-developers.com/showthread.php?t=1469635 just wondering why you encounterred a problem. Thx.
Sent from my GT-P6800
cakrabayu said:
Sorry....Did you follow this guide while using odin? http://forum.xda-developers.com/showthread.php?t=1469635 just wondering why you encounterred a problem. Thx.
Sent from my GT-P6800
Click to expand...
Click to collapse
I was doing everything like in tutorial, tablet was full charged and i got this error, that's the story..
What could possibly go wrong?
bajki_ktm said:
I was doing everything like in tutorial, tablet was full charged and i got this error, that's the story..
What could possibly go wrong?
Click to expand...
Click to collapse
Really sad about your problem bro.... something wrong with the procedure or your firmware.. there are many cases like you.. you can refer to :
http://androidforums.com/samsung-ga...help-firmware-flashing-failed-using-odin.html
http://forum.xda-developers.com/showthread.php?t=1877308&page=2
http://forum.xda-developers.com/showthread.php?t=1984717
http://forums.whirlpool.net.au/archive/1919243
but it is up to you to give it a try. Luckily for me, I did not encounter the same problem like yours while flashing with pc odin. I prefer using mobile odin. it is safe and easy. Good luck bro...
I am having the same issue on my P6810 (16gb). I cannot use the emergency recovery in Kies because I don't have the recovery code that it asks for (I bought the device as used faulty so don't know the update history). When I try to use the firmware upgrade / initialisation function to reset the tablet, Kies downloads the firmware but fails to connect to the tablet when I plug it in (in download mode, which I can access).
I have tried flashing a downloaded firmware using Odin3 v1.85 and it appears to start okay and copies cache.img but quickly hangs at the factoryfs.img stage.
I have tried different both win7x64 and winXP PCs with no success. I did try Heimdall, which uses a different USB driver, and while I did not have an appropriate Heimdall compatible firmware to flash, I was able to get a display of the current PIT information, so the tablet was communicating OK.
Does my device need repartitioning? I have seen many references to a PIT file, but don't know where to download it from.
This seems to be a common problem from what I can tell so far.
Any help appreciated.
Thanks.
Hello i have the same problem. I read all of your suggestions and guess that should be use a pit-file. Is this overwrite a system. I have troubled ROM compiled and want to install the new one downloaded from sammobiles fo my country. Am I right? Please help me?
So i recently rooted my i925 with this universal method...
http://forum.xda-developers.com/showthread.php?t=2403230
https://www.youtube.com/watch?v=QCBLOhWavT0
Then I decided to try and run the casuall "Jailbreak" software to get a custom recovery and unlocked bootloader and i just checked "I did it" during the root portion since I already was... and now I'm soft bricked. I can only get into the download mode and tried flashing with odin but no luck might be doing something wrong... Also tried following the cyanogen instructions which involve flashing a cwm recovery in download mode but still no luck. Any help would be greatly appreciated!!! If I hold power the screen will just flash the download mode screen on and off. I pulled the back off and pulled power. No difference.
Any ideas guys? This is the first time I've bricked anything since I've been here and it's got me pretty worried...
Still stuck is anyone has any ideas.
2rz_taco_sr5 said:
Still stuck is anyone has any ideas.
Click to expand...
Click to collapse
I would retry ODIN with the original VRAMK1 firmware available from sammobile.com. If that doesn't work tell us what error you are getting.
tselling said:
I would retry ODIN with the original VRAMK1 firmware available from sammobile.com. If that doesn't work tell us what error you are getting.
Click to expand...
Click to collapse
this is what i get in the message box.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
if it helps im using odin3 v1.85 and then Kies v2.6.3.14074_11 to install the driver. also im running windows 8.1 if that matters.
2rz_taco_sr5 said:
this is what i get in the message box.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
if it helps im using odin3 v1.85 and then Kies v2.6.3.14074_11 to install the driver. also im running windows 8.1 if that matters.
Click to expand...
Click to collapse
Maybe try Heimdall commandline. You can flash individual pieces.
tselling said:
Maybe try Heimdall commandline. You can flash individual pieces.
Click to expand...
Click to collapse
I'm just going to warranty it out with verizon. Ive warrantied phones before with no issue. usually for amoled screens that get shadows before the year warranty is up. Hoping all goes well.
im having this same issue, device keeps starting and then fails out, is there a solution to this?
I factory reset my Samsung Grand 2 then charged it. When I saw my phone it was updated in kitkat. I accidentally hit the install and reboot. But after that, it stuck in logo screen. I've tried to wipe data, cache and everything. So, I flash it with odin with correct latest firmware. But it keeps on failing and appears firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Ive tried to fix it with Kies but there's no chance. I also brought it to service center but they said it keeps on failing and the program cant enter.
This is the ODIN log:
ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_VZW_stock_system.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've been searching how to fix my phone.
PLEASE SOMEONE HELP ME.
xilaaa said:
I factory reset my Samsung Grand 2 then charged it. When I saw my phone it was updated in kitkat. I accidentally hit the install and reboot. But after that, it stuck in logo screen. I've tried to wipe data, cache and everything. So, I flash it with odin with correct latest firmware. But it keeps on failing and appears firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Ive tried to fix it with Kies but there's no chance. I also brought it to service center but they said it keeps on failing and the program cant enter.
This is the ODIN log:
ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_VZW_stock_system.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've been searching how to fix my phone.
PLEASE SOMEONE HELP ME.
Click to expand...
Click to collapse
See if you have the proper firmware and read the instructions here: http://forum.xda-developers.com/galaxy-grand-2/general/stock-firmware-grand-2-google-drive-t2849501
Or else you could ask help from anyone having a similar phone in this forum: http://forum.xda-developers.com/galaxy-grand-2
I tried the instruction but it didn't work still failed. I also tried to flash it with original stock but it says SW REV CHECK FAIL : [sbl1]Fused 1 > Binary 0
Im losing hope. Please help :crying: :crying:
xilaaa said:
I tried the instruction but it didn't work still failed. I also tried to flash it with original stock but it says SW REV CHECK FAIL : [sbl1]Fused 1 > Binary 0
Im losing hope. Please help :crying: :crying:
Click to expand...
Click to collapse
I don't know specifically about your phone.
Only asking someone here would help: http://forum.xda-developers.com/galaxy-grand-2/help
I tried to downgrade my phone but it shows SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
Hello,
I want to flash to G920FXXU1AOD4 from G920FXXU1AOE3.
I tried to use Odin 1.85 and 3.04.
This is the error that I'm getting in Odin 1.85:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOD4_G920FOJK1AOD4_G920FXXU1AOCZ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Why can't I flash to this firmware?
Help...
r'n'b said:
Hello,
I want to flash to G920FXXU1AOD4 from G920FXXU1AOE3.
I tried to use Odin 1.85 and 3.04.
This is the error that I'm getting in Odin 1.85:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOD4_G920FOJK1AOD4_G920FXXU1AOCZ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Why can't I flash to this firmware?
Help...
Click to expand...
Click to collapse
Did you turn on USB DEBUGGING?
Hello again
I had the same problem with flashing rom with odin... I found a solution and explained it how to fix mine...
I hope it be helpful
http://forum.xda-developers.com/galaxy-s6/help/help-odin-stuck-start-write-nand-t3127992
k2evil said:
Hello again
I had the same problem with flashing rom with odin... I found a solution and explained it how to fix mine...
I hope it be helpful
http://forum.xda-developers.com/galaxy-s6/help/help-odin-stuck-start-write-nand-t3127992
Click to expand...
Click to collapse
Ok... I Solved my problem finally... I spent almost 3 days in forums to find a solution... So i give you guys a summary what I do:
1) Find my phone's pit file according to model and storage capacity (Mine is G920F 32GB)
2)Then the trick is use ODIN V3.10.6 insist of V3.09... http://forum.xda-developers.com/showthread.php?t=2711451
3)If you face with hidden.img problem, extract the rom's file and rename the file hidden.img to hidden.img.tar and flash it by ODIN (Put this file on AP)...
Wait for some minutes and there is where magic happens
Click to expand...
Click to collapse
I don't understand your solution.
What do I need to do with the pit file?
My device is also G920F 32GB.
The USB DEBUGGING is on.
r'n'b said:
I don't understand your solution.
What do I need to do with the pit file?
My device is also G920F 32GB.
The USB DEBUGGING is on.
Click to expand...
Click to collapse
I heard from someone that Stucking in Start Write NAND is because of pit file...
but forget about it.. try without pit file. download the lastest odin v 3.10
usually process fails when it try to flash hidden.img... if it happen for you, do the 3th step
k2evil said:
I heard from someone that Stucking in Start Write NAND is because of pit file...
but forget about it.. try without pit file. download the lastest odin v 3.10
usually process fails when it try to flash hidden.img... if it happen for you, do the 3th step
Click to expand...
Click to collapse
Finally I managed to flush the ROM
Odin3_v3.10.6 did the job.
Thanks!
Your welcome buddy... just don't forget to hit the thank button
my tablet shows encryption failed message, reset phone but nothing happend when i click on reset button, moreover i tried going to the wipe data/factory reset option but my tablet wont allow me to go that menu, it simply restarts the device.
anyways i read that i should try and install a new firmware for my device but i did try using many odin versions and different firmwares, this is what odin shows me:-
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXUDNE5_N8000OLBDNE3_N8000DXUDND1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
did u flash the latest firmware ? n make sure the right odin to flash it
howdeedodat said:
did u flash the latest firmware ? n make sure the right odin to flash it
Click to expand...
Click to collapse
Yes I did use the latest firmware, and also tried using old ones
Also, which version of odin should I use exactly?
adityaka said:
Yes I did use the latest firmware, and also tried using old ones
Also, which version of odin should I use exactly?
Click to expand...
Click to collapse
depend which android that u trying to flash