Database Info

GT-P5100 Firmware upgrade encountered an issue

Hi everybody, I tried to upgrade my GT-P5100 to 4.2.2 but something went wrong and now I have a black screen with this message:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Probably I have selected Re-Partition but I didn't have a PIT file
The tablet had the stock rom and was not rooted.
I have Odin 3.07 and this PDA file but the procedure fails:
P5100XXDMJ2_P5100VFGDMJ2_P5100XXDMG1_HOME.tar.md5
Code:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XXDMJ2_P5100VFGDMJ2_P5100XXDMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can't start Recovery or Download mode.
Can you help me?
Please if I need some more files write me all the links to download them, because many of them were hosted by hotfile and are no more downloadable...

"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
That´s the Black-Screen of Death! Downloadmode is on in this window Connect to your PC, Odin will get your device
There should be no Problem with the file itself "<OSM> Checking MD5 finished Sucessfully.." - bad download will give another output because the MD5 is not valid if it´s broken.
Make sure you uninstall KIES before using Odin and run Odin as Administrator !!!

Kies in installed and Odin is executed as administrator
So what should I do?

GT-P5100 restore stock rom firmware odin
SOLVED using this guide and this file

dylan6662 said:
SOLVED using this guide and this file
Click to expand...
Click to collapse
Hello, i have the same your prblem with my galaxy tab 2 10.1 !!!...
do you remember how you managed to solve?
Do you remember what was the file of "this link" (http://www.bergfiles.com/i/bf5bdebbf2hci0) that is no longer active?...
I have absoluty need !!
THANKS !!!

Still on trouble
I still can find the right link to download the necessary file to flash on my gt-p5100 like this case , my screen just still say "Firmware upgrade encountered......"
cant log into download mode
but still detect on odin
please help me.

Hi all. I have the same problem. A message "Firmware .... an issue" Tried different Odin versions. With 3.07 and 3.10 versions looks like flashing is ok, Odin shows no errors. But nothing on the tablet, there's not status bar. And when flashing finished, Odin shows no errors. But tablet really not flashed. What the problem can be? Who can help?

HELP HELP

andrezerotwo said:
HELP HELP
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...opment/odin-gt-p5100-4-2-2-stock-rom-t3022183
try this link, it is stock firmware.
further if it can't solve by just flashing firmware, you can try pit file. but be careful before flashing this with odin, be sure of what it will do, there are guides to explain the proper process.
http://forum.xda-developers.com/showthread.php?t=2552155

I have the exact same problem, tried different odin versions, flashed the stock firmware, also tried different pc's, but no solution.
this is the error I keep getting on odin, Tried Kies it says P3100 does not support initializing. A friend says maybe its a motherboard issue, is that possible or just a firmware problem? What should I do next?
This is the error I get in ODIN.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3100DDCNA3_P3100ODDCNB1_P3100DDCLK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

v1v14n said:
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hi! With my tablet the same. I understand that eMMC has died, need a replacement and reflashing of the programmer.

GT-P5100 Firmware upgrade encountered an issu
Hi All,
I have the exact same problem with GT P5100, I cannot update my 5100,Itried different odin (1.85,307,309,1,7) versions, flashed different firmwares, but no solution.
this is the error I keep getting on odin.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XXDMD1_P5100DBTDMD1_P5100XXDLL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> recovery.img
<ID:0/005> modem.bin
<ID:0/005> MLO
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
Many thanks in advance,

need some help. Soft bricked i925 verizon note 10.1

So i recently rooted my i925 with this universal method...
http://forum.xda-developers.com/showthread.php?t=2403230
https://www.youtube.com/watch?v=QCBLOhWavT0
Then I decided to try and run the casuall "Jailbreak" software to get a custom recovery and unlocked bootloader and i just checked "I did it" during the root portion since I already was... and now I'm soft bricked. I can only get into the download mode and tried flashing with odin but no luck might be doing something wrong... Also tried following the cyanogen instructions which involve flashing a cwm recovery in download mode but still no luck. Any help would be greatly appreciated!!! If I hold power the screen will just flash the download mode screen on and off. I pulled the back off and pulled power. No difference.

Any ideas guys? This is the first time I've bricked anything since I've been here and it's got me pretty worried...

Still stuck is anyone has any ideas.

2rz_taco_sr5 said:
Still stuck is anyone has any ideas.
Click to expand...
Click to collapse
I would retry ODIN with the original VRAMK1 firmware available from sammobile.com. If that doesn't work tell us what error you are getting.

tselling said:
I would retry ODIN with the original VRAMK1 firmware available from sammobile.com. If that doesn't work tell us what error you are getting.
Click to expand...
Click to collapse
this is what i get in the message box.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
if it helps im using odin3 v1.85 and then Kies v2.6.3.14074_11 to install the driver. also im running windows 8.1 if that matters.

2rz_taco_sr5 said:
this is what i get in the message box.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
if it helps im using odin3 v1.85 and then Kies v2.6.3.14074_11 to install the driver. also im running windows 8.1 if that matters.
Click to expand...
Click to collapse
Maybe try Heimdall commandline. You can flash individual pieces.

tselling said:
Maybe try Heimdall commandline. You can flash individual pieces.
Click to expand...
Click to collapse
I'm just going to warranty it out with verizon. Ive warrantied phones before with no issue. usually for amoled screens that get shadows before the year warranty is up. Hoping all goes well.

im having this same issue, device keeps starting and then fails out, is there a solution to this?

[Q&A] [ODIN][UCLB3] UCLB3 Unbrick - Return to stock - Working PIT included

Q&A for [ODIN][UCLB3] UCLB3 Unbrick - Return to stock - Working PIT included
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ODIN][UCLB3] UCLB3 Unbrick - Return to stock - Working PIT included. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Attempted to follow the guide here on my old Infuse to breathe some life back into it, but I can't get it to work. Installed the drivers through Kies, Odin detects my phone in yellow. I follow the guide to the letter, but after flashing 'reset' in blue and getting the green 'pass' my phone simply doesn't reboot, nor can I boot it manually. I've removed the battery a few times and it doesn't change the situation. I can still boot into download mode with no issue and have tried flashing a few times, but I'm having no success booting the phone after Odin is done, nor can I get into recovery mode.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PHONE_UCLB3.tar.md5 is valid.
<OSM> PHONE_UCLB3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> modem.bin
<ID:0/003> modem.bin
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Any ideas?

SG2Tiger said:
Attempted to follow the guide here on my old Infuse to breathe some life back into it, but I can't get it to work. Installed the drivers through Kies, Odin detects my phone in yellow. I follow the guide to the letter, but after flashing 'reset' in blue and getting the green 'pass' my phone simply doesn't reboot, nor can I boot it manually. I've removed the battery a few times and it doesn't change the situation. I can still boot into download mode with no issue and have tried flashing a few times, but I'm having no success booting the phone after Odin is done, nor can I get into recovery mode.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PHONE_UCLB3.tar.md5 is valid.
<OSM> PHONE_UCLB3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> modem.bin
<ID:0/003> modem.bin
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Any ideas?
Click to expand...
Click to collapse
I never tried this flash before, but I do have a couple questions before proceeding...
Is your phone AT&T or Rogers?
Are you able to get back into download mode (that is, by method of device fully turned off, holding down both Volume Buttons and inserting the USB cable)?

joel.maxuel said:
I never tried this flash before, but I do have a couple questions before proceeding...
Is your phone AT&T or Rogers?
Are you able to get back into download mode (that is, by method of device fully turned off, holding down both Volume Buttons and inserting the USB cable)?
Click to expand...
Click to collapse
AT&T, the model is I997. I can still get into download mode, but I can't boot normally, nor into recovery mode (by holding volume up + volume down + power button; Samsung logo never appears). I used the included version of Odin with both the UCLB3_Unbrick_1.1.zip and UCLB3_Unbrick_root_1.1.zip files on the linked thread (I tried both).

SG2Tiger said:
AT&T, the model is I997. I can still get into download mode, but I can't boot normally, nor into recovery mode (by holding volume up + volume down + power button; Samsung logo never appears). I used the included version of Odin with both the UCLB3_Unbrick_1.1.zip and UCLB3_Unbrick_root_1.1.zip files on the linked thread (I tried both).
Click to expand...
Click to collapse
I always recommend this one for AT&T (could never try it myself, as I was a Rogers user), but you may have more luck with this (option A or D).
http://forum.xda-developers.com/showthread.php?t=1613523

joel.maxuel said:
I always recommend this one for AT&T (could never try it myself, as I was a Rogers user), but you may have more luck with this (option A or D).
http://forum.xda-developers.com/showthread.php?t=1613523
Click to expand...
Click to collapse
Tried this a few times and it keeps failing. It'll get about 1/3 of the way there and then my computer will make the 'device disconnected' noise and Odin will fail. I left it in download mode, plugged in, without attempting the download to see if it was an issue with my cable or port, and it didn't disconnect...it seems to only be happening when I attempt to flash the md5.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I997UCLB3-CWM-root-deodex-extras.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!

SG2Tiger said:
Tried this a few times and it keeps failing. It'll get about 1/3 of the way there and then my computer will make the 'device disconnected' noise and Odin will fail. I left it in download mode, plugged in, without attempting the download to see if it was an issue with my cable or port, and it didn't disconnect...it seems to only be happening when I attempt to flash the md5.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I997UCLB3-CWM-root-deodex-extras.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
Even with option D? I see C was used, based on the log...
Sent from my Asus MeMO Pad 8"

joel.maxuel said:
Even with option D? I see C was used, based on the log...
Sent from my Asus MeMO Pad 8"
Click to expand...
Click to collapse
For some reason option D is taking an unreasonable amount of time to download (it's been over an hour now), so I had initially skipped it and tried options A and C, with the same results. I'll report back once I am actually able to get option D downloaded.

Same problem with every option. Progress reaches about halfway, then fails.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I997UCLB3-CWM-root-deodex.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!

SG2Tiger said:
Same problem with every option. Progress reaches about halfway, then fails.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I997UCLB3-CWM-root-deodex.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
Last thing I can think of, you are using the Odin that comes with the package right?

joel.maxuel said:
Last thing I can think of, you are using the Odin that comes with the package right?
Click to expand...
Click to collapse
Yes, it should be Odin3 v1.7.

The dev-host file mirrors are down? Does anybody have copies of them to upload?
I need the one with root.

Umaroth said:
The dev-host file mirrors are down? Does anybody have copies of them to upload?
I need the one with root.
Click to expand...
Click to collapse
Sorry, no option A here, but I do have option C (with CWM, deodex, etc) on mirror. See the following link:
http://forum.xda-developers.com/showpost.php?p=58392432
Hope this helps.

Link Are Broken
Umm the link cant be downloaded.. i m trying to restore my infuse but most of the downloadable file is broken or file not found

ZExNos said:
Umm the link cant be downloaded.. i m trying to restore my infuse but most of the downloadable file is broken or file not found
Click to expand...
Click to collapse
Good evening,
Try my mirror:
http://forum.xda-developers.com/showpost.php?p=58392432
Options are limited, only "Option C" but it should be enough to get the job done.
Cheers.

[Completed] galaxy S6, bootloop, odin - write operation failed.

Hi. i have recently acquired an Samsung S6 SM-G920P. it was rooted with 5.0.1 and it was freezing and restating.
So flash/stock firmware marshmallow but it got stuck at optimizing apps. I restarted the phone and managed to skip it (don't know how). After all the process of name, date&time zone, wifi config, etc...about 10-20min it freezes again and restarts. So i tried to update the software via otta, and android gave me a 19mb, but the same happened, it got stuck at optimizing apps.
After that it began to freezing more and more often. I tried to change the firmware to another version with odin, but now odin shows an error (write operation failed). I installed TWRP and wipe dalvkin/cache and cache and after that, it started to boot-loop and mi stuck on it.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help me, don't know what else to do.
ill be around often here to check any update on the thread but if anyone can contact me, ill be grateful
whatsapp: +258844797495, [email protected]

Well ,
Ur s6 won't install old bootloader over the newer bootloader mate , so try to use the latest firmware that have the newer bootloader or at least the same firmware that have the same bootloader on ur device ,
Good luck
Thank you for Using XDA Assist ,,

samsung galaxy note 10.1 shows encryption failed, already tried to install new firmware through odin doesnt work

my tablet shows encryption failed message, reset phone but nothing happend when i click on reset button, moreover i tried going to the wipe data/factory reset option but my tablet wont allow me to go that menu, it simply restarts the device.
anyways i read that i should try and install a new firmware for my device but i did try using many odin versions and different firmwares, this is what odin shows me:-
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXUDNE5_N8000OLBDNE3_N8000DXUDND1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

did u flash the latest firmware ? n make sure the right odin to flash it

howdeedodat said:
did u flash the latest firmware ? n make sure the right odin to flash it
Click to expand...
Click to collapse
Yes I did use the latest firmware, and also tried using old ones
Also, which version of odin should I use exactly?

adityaka said:
Yes I did use the latest firmware, and also tried using old ones
Also, which version of odin should I use exactly?
Click to expand...
Click to collapse
depend which android that u trying to flash