can't root my galaxy grad 2 lte - General Questions and Answers

i have tried to root my phone ( sm-g7105) for a while now and everytime i try to root using cf auto root using odin it gets stuck on download mode and this messege comes up
could not do normal boot
odin mode
product name: sm-g7105
current binary:custom
system status:custom
qualcomm Secureboot:enable (CSB)
Warrenty bit: 1
RP SWREV : s1, T1, R1, A1, p1
Write protection: enable
the android version is 4.3
PLS HELP

Related

ODIN don't work "Re-partition operation failed"

Hi, so here's my SGGP SM-G530FZ is off suddenly when I tried to turn it back but he remained on the logo so I tried the recovery mode but when I run it marked "
MMC: mmc_read fail
Movinand Checksum Confirmation Fail
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: SM-G530FZ
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, H1, R1, A1, P1
SECURE DOWNLOAD : ENABLE"
only the download mode works but when I try to flash with Odin the latest firmware released for this one (4 files) with the pit it marks me "Re-partition operation failed" :crying: , if you wants screen or logs just ask . Thanks you for helping
[Translate (Fr to En) with Google Translate]
Nobody? :crying:

SM-N915F Pit Binary Missing

DEVICE NOTE EDGE SM-N915F
I have only access to Download Mode
No Recovery or Functional ROM installed
Problem: Every time it says "There is no Pit Partition"
Already tried Install with Odin (AP_N915FXXU1BOA2.tar and TBLTE_EUR_OPEN.pit) But Same Error.
-----------------------------------------------------
ODIN MODE
Product Name: SM-N915F
Current Binary:Custom
System Status:Custom
Reactivation Lock: Off
Knock Warrenty Void: 0x1 (4)
Qualcomm Secure Boot: Enable (CSB)
AP SWREV : S1 T1 R1 A1 P1
Secure Download: Enable
UDC Start
ODIN Flash Read Failure
Error: There is no PIT Binary
Secure Check Fail: PIT
ODIN: Flash Read Failure
-----------------------------------------------------
Are you flashing only PIT and AP, or the full set: PIT, BL, AP, CP and CSC?
Sent from my SM-N915G using Tapatalk
i am receiving this same issue. is there any way you can assist as i am a first time samsung user?
I am Having same issue on my Samsung Galaxy Note Edge.

Stuck on this screen G950U BST

I can´t flashing g950u. Error with odin 3.12.3, 3.12.5, 3.12.7, smart watch, z3x and chimera tool.
The screen was on earlier which is why I'm confused.
I cant really get a good picture but I can list the text here:
Build info: Apr 28 2017
Build info2: SWHE7706:dpi QB:13390971
Build Ver: FA70_G950UDQU1AQDB_11303241 [ user]
Chip Name: MSM8998
Chip Ver: 2.1
PM8998 Ver: 2.0/PM8005 ver: 2.0
HW Rev: 12
Model Name: SM-G950U
Serial Number
Cable: 3
Debug level: Mid
Carrier: SPR
Fused Open Loop Voltage: 986
CPR_IDDQ_INFO SILVER: 0x1A
CPR_IDDQ_INFO GOLD: 0x45
DDR Vendor: Samsung
Update fail
MDM MODE: CAN'T DOWNLOAD (bksecapp)
error chimera tool
RP SWREV: B1 (1, 1, 1, 1, 1) K1 S1
Downgrade: tz.mbn (1 -> 0)
solution??
mjrablvc said:
I can´t flashing g950u. Error with odin 3.12.3, 3.12.5, 3.12.7, smart watch, z3x and chimera tool.
The screen was on earlier which is why I'm confused.
I cant really get a good picture but I can list the text here:
Build info: Apr 28 2017
Build info2: SWHE7706:dpi QB:13390971
Build Ver: FA70_G950UDQU1AQDB_11303241 [ user]
Chip Name: MSM8998
Chip Ver: 2.1
PM8998 Ver: 2.0/PM8005 ver: 2.0
HW Rev: 12
Model Name: SM-G950U
Serial Number
Cable: 3
Debug level: Mid
Carrier: SPR
Fused Open Loop Voltage: 986
CPR_IDDQ_INFO SILVER: 0x1A
CPR_IDDQ_INFO GOLD: 0x45
DDR Vendor: Samsung
Update fail
MDM MODE: CAN'T DOWNLOAD (bksecapp)
error chimera tool
RP SWREV: B1 (1, 1, 1, 1, 1) K1 S1
Downgrade: tz.mbn (1 -> 0)
Click to expand...
Click to collapse
Hi
I have the same problem
Did you managed to get any solution for this??
Thanks in advance
looks like the screen that appears for the eng boot file. I had the same issue with a phone today. Probably a bad flash or file. Try flashing stock firmware from download mode via ODIN
snsmosko said:
Hi
I have the same problem
Did you managed to get any solution for this??
Thanks in advance
Click to expand...
Click to collapse
no solution yet
Get it in download mode and flash stock firmware again.
Before flashing engboot or combi, wipe cache and restart to bootloader

FRP lock ON, And a ton of problems

Hi, recently my mom tried to root her galaxy S7 but she made a mess, so, Now this Galaxy S7 has FRP Lock ON, When we try to Factory reset It gets stuck in boot screen and there is a message saying "E: Failed to clear BCB message: failed to find /misc partition"
I tried flashing a stock rom but FRP blocks it...
I tried even every other solution i've seen in the forum but nothing helped
Mobile stuff that can be useful:
Product-Name: SM-G930F
Current Binary: Samsung Official
System Status: Custom
FRP Lock: On
Secure Download: Enabled
Warranty Void: 0 (0x0000)
RP SWREV: B:2 K:0 S:0
Recovery Mode Stuff:
samsung/heroltexx/herolte8.0.0/R16NWG930FXXU2ERE8
Errors i see in recovery mode:
#Fail to open recovery_cause(No such file or directory)#
#Reboot Recovery_Cause is [UNKNOWN]#
no Support SINGLE-SKU
File-Based OTA
Supported API: 3
#Manual Mode V1.0.0#
Successfully Verified dmverity hash tree
E: Failed to clear BCB message: failed to find /misc partition
Can anyone help this messy phone?
Thanks for your replies

Galaxy S5 g900A TRWP install failure

Every time I use Odin to install TWRP I get a failure.
<ID:0/004> recovery.img
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I did set USB Debugging ON.
Tried both Odin Options > Auto reboot ON and OFF.
I've tried different cables (no change),
different versions of Odin (Odin3_v3.10.7, Odin3 v3.11.1, odin3-v3.12.4_4),
3 different date versions of TWRP plus redownloads (twrp-klte.tar, twrp-3.3.1-0-klte.img.tar, twrp-3.6.0_9-0-klte.img.tar),
and a factory reset on the phone.
Other than this the phone seems top work fine. I did successfully do this a couple of years ago, but it doesn't work now.
The phone screen says:
ODIN MODE
PRODUCT NAME: SM-900A
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 8x8
QUALCOMM SECURE BOOT: ENABLE (CSB)
AP SWREV: S1, T2, R1, A4, P1
SECURE DOWNLOAD: ENABLE
UDC START
SECURE CHECK FAIL: recovery
SECURE CHECK FAIL: recovery
SECURE CHECK FAIL: recovery
SECURE CHECK FAIL: recovery
I did try multiple times to install so S C FAIL x 4
Is something wrong with the phone?
What else can I do?
The TWRP site gives five different downloads for the S5 depending on the phone you have.
Always choose the right and latest one.
I found a wonderful description of the way you should act using Odin and TWRP
The description is for the S8 but the installation is practically the same.
HELP! S8 got bricked, can't access recovery mode and OEM is locked
Can I get some help? I bricked my phone because I was trying to install twrp. It flashed but I got an error where it reset my data, after data reset I was stuck at the boot screen with the logo . I've tried steps like flashing stock rom, odin...
forum.xda-developers.com
Give it a try on your S5.
Hope this might help you .
drkenrich1688 said:
Every time I use Odin to install TWRP I get a failure.
<ID:0/004> recovery.img
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I did set USB Debugging ON.
Tried both Odin Options > Auto reboot ON and OFF.
I've tried different cables (no change),
different versions of Odin (Odin3_v3.10.7, Odin3 v3.11.1, odin3-v3.12.4_4),
3 different date versions of TWRP plus redownloads (twrp-klte.tar, twrp-3.3.1-0-klte.img.tar, twrp-3.6.0_9-0-klte.img.tar),
and a factory reset on the phone.
Other than this the phone seems top work fine. I did successfully do this a couple of years ago, but it doesn't work now.
The phone screen says:
ODIN MODE
PRODUCT NAME: SM-900A
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 8x8
QUALCOMM SECURE BOOT: ENABLE (CSB)
AP SWREV: S1, T2, R1, A4, P1
SECURE DOWNLOAD: ENABLE
UDC START
SECURE CHECK FAIL: recovery
SECURE CHECK FAIL: recovery
SECURE CHECK FAIL: recovery
SECURE CHECK FAIL: recovery
I did try multiple times to install so S C FAIL x 4
Is something wrong with the phone?
What else can I do?
Click to expand...
Click to collapse
If already fixed then please let us know how you did it ... with some details.
I no longer have this problem. I upgraded to a Moto G7.
I did read the link above and it sounds interesting. I would definitely try it if I still had the Galaxy S5.

Categories

Resources