Every time I use Odin to install TWRP I get a failure.
<ID:0/004> recovery.img
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I did set USB Debugging ON.
Tried both Odin Options > Auto reboot ON and OFF.
I've tried different cables (no change),
different versions of Odin (Odin3_v3.10.7, Odin3 v3.11.1, odin3-v3.12.4_4),
3 different date versions of TWRP plus redownloads (twrp-klte.tar, twrp-3.3.1-0-klte.img.tar, twrp-3.6.0_9-0-klte.img.tar),
and a factory reset on the phone.
Other than this the phone seems top work fine. I did successfully do this a couple of years ago, but it doesn't work now.
The phone screen says:
ODIN MODE
PRODUCT NAME: SM-900A
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 8x8
QUALCOMM SECURE BOOT: ENABLE (CSB)
AP SWREV: S1, T2, R1, A4, P1
SECURE DOWNLOAD: ENABLE
UDC START
SECURE CHECK FAIL: recovery
SECURE CHECK FAIL: recovery
SECURE CHECK FAIL: recovery
SECURE CHECK FAIL: recovery
I did try multiple times to install so S C FAIL x 4
Is something wrong with the phone?
What else can I do?
The TWRP site gives five different downloads for the S5 depending on the phone you have.
Always choose the right and latest one.
I found a wonderful description of the way you should act using Odin and TWRP
The description is for the S8 but the installation is practically the same.
HELP! S8 got bricked, can't access recovery mode and OEM is locked
Can I get some help? I bricked my phone because I was trying to install twrp. It flashed but I got an error where it reset my data, after data reset I was stuck at the boot screen with the logo . I've tried steps like flashing stock rom, odin...
forum.xda-developers.com
Give it a try on your S5.
Hope this might help you .
drkenrich1688 said:
Every time I use Odin to install TWRP I get a failure.
<ID:0/004> recovery.img
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I did set USB Debugging ON.
Tried both Odin Options > Auto reboot ON and OFF.
I've tried different cables (no change),
different versions of Odin (Odin3_v3.10.7, Odin3 v3.11.1, odin3-v3.12.4_4),
3 different date versions of TWRP plus redownloads (twrp-klte.tar, twrp-3.3.1-0-klte.img.tar, twrp-3.6.0_9-0-klte.img.tar),
and a factory reset on the phone.
Other than this the phone seems top work fine. I did successfully do this a couple of years ago, but it doesn't work now.
The phone screen says:
ODIN MODE
PRODUCT NAME: SM-900A
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 8x8
QUALCOMM SECURE BOOT: ENABLE (CSB)
AP SWREV: S1, T2, R1, A4, P1
SECURE DOWNLOAD: ENABLE
UDC START
SECURE CHECK FAIL: recovery
SECURE CHECK FAIL: recovery
SECURE CHECK FAIL: recovery
SECURE CHECK FAIL: recovery
I did try multiple times to install so S C FAIL x 4
Is something wrong with the phone?
What else can I do?
Click to expand...
Click to collapse
If already fixed then please let us know how you did it ... with some details.
I no longer have this problem. I upgraded to a Moto G7.
I did read the link above and it sounds interesting. I would definitely try it if I still had the Galaxy S5.
Related
My phone is now softbricked after I got OTA update.
It was rooted and unlocked bootloader, but OTA update unrooted and locked bootloader(I think).
So I researched forum, and I realized I can flash custom recovery to flash custom rom.
I tried to install CWM 6.0.1.2 which can flash with Odin.
And it failed.
Code:
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
like this.
And on the Phone(which is on download mode)
Code:
[COLOR="red"]ODIN MODE[/COLOR]
PRODUCT NAME: SCH-I535
CUSTOM BINARY DOWNLOAD: YES (40 COUNTS)
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
[COLOR="RoyalBlue"]QUALCOMM SECUREBOOT: ENABLE[/COLOR]
[COLOR="Red"]WARRANTY BIT: 1[/COLOR]
[COLOR="RoyalBlue"]BOOTLOADER RP SWREV: 1[/COLOR]
[COLOR="Red"]SECURE CHECK FAIL : RECOVERY[/COLOR]
And yes, I flashed stock recovery because it failed all the time.
Any other way to flash custom recovery?
I can't go into TW now cause it is bricked.
p.s. the picture is the message when I turn on normally.
I am having a similar issue with my phone. If someone could please help it would be appreciated
I believe since you accepted the OTA update, your bootloader is locked, therefore you cannot install a custom recovery. Not sure if there is a work around for the new 4.3 from Big Red atm.
I realize now that the bootloader is locked, unfortunately that is after the fact. Would there be a fix to this soft brick? I stuck dead in the water without a phone.
WARRANTY BIT: 1 I thought that meant your dead in the water no matter what? shouldn't it say 0?
Hello,
Have just got a used Note 4 unrooted with 5.0.1 firmware. Trying to root it using (CF-Auto-Root-trlte-trltexx-smn910f). Can't get Odin to flash it on the phone.
It seems like the phone somehow blocks everything from flashing. This is what I get after each attempt:
On the phone
UDC Start
SECURE CHECK: FAIL
In Odin
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
The same happens with any md5 i am trying to flash (TWRP/Philz). Went through all available forums and could not find any solution.
Re-activation lock disabled as never signed in to Samsung.
Has anyone got any ideas on this please
hello i have galaxy j7108
my android version is 6.0.1
and I've tried to root my phone many times but when i flash this file
/twrp-3.0.2-0-j7elte.img.tar.
with the odin it's pass but when the phone is up it's say recovery is not seandroid enforcing error and the phone up but not to the twrp recovery..
what i need to do please help
if it's help i've worte what appears me when I'm on download mode:
Download Speed: Fast
Product Name: SM-J7108
CURRECT BINARY: Custom
SYSTEM STATUS: Custom
FPR Lock: Off
CROM SERVICE: Off
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0x0500)
RP SWREV : B:1 K:0 S:0
naorsal said:
hello i have galaxy j7108
my android version is 6.0.1
and I've tried to root my phone many times but when i flash this file
/twrp-3.0.2-0-j7elte.img.tar.
with the odin it's pass but when the phone is up it's say recovery is not seandroid enforcing error and the phone up but not to the twrp recovery..
what i need to do please help
if it's help i've worte what appears me when I'm on download mode:
Download Speed: Fast
Product Name: SM-J7108
CURRECT BINARY: Custom
SYSTEM STATUS: Custom
FPR Lock: Off
CROM SERVICE: Off
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0x0500)
RP SWREV : B:1 K:0 S:0
Click to expand...
Click to collapse
Have you installed adb? First install adb on your pc then your phone driver. Then it will work. Also turn on oem unlock in developer option.
Syed Rafat said:
Have you installed adb? First install adb on your pc then your phone driver. Then it will work. Also turn on oem unlock in developer option.
Click to expand...
Click to collapse
i've did all this thinks..
i've also tried this:
[EASY STEPS] Fix Recovery is not Seandroid Enforcing Without Deleting Data (TWRP METHOD)
and its pass but it's still show me the *****y error
i've always got the "Pass" message... but This is the log message from Odin:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> cache.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Flash another recovery ver 3.0.0 or 7.8.0
naorsal said:
i've did all this thinks..
i've also tried this:
[EASY STEPS] Fix Recovery is not Seandroid Enforcing Without Deleting Data (TWRP METHOD)
and its pass but it's still show me the *****y error
i've always got the "Pass" message... but This is the log message from Odin:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> cache.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Odin said succes but it won't be succeeded if windows doesn't have adb and j7 driver. Install adb and driver again and take help from youtube or google on how to or something.
Okay I try to do this on other computer
naorsal said:
Okay I try to do this on other computer
Click to expand...
Click to collapse
Me too,
I' ve tried several TWRP, but I don't found one good for this model.
the only one work but was in China language and writing : kernel is not seandorid enforcing
https://forum.xda-developers.com/ga...root-files-t3381637/post71454220#post71454220
I'm waiting he aswer me.
I tried to download this and the twrp is really work but when i install the supersu and reboot the phone it's do a bootloop
Hey, I had the same problem in the first time I tried to root my J7(the phone wasn't booting and showed that error in the boot screen), what I did was instal the stock Rom and then he booted normally and I didn't lost any data.
Some days later I rooted it and installed a wannam xposed version(the only one I found that was working perfectly)
Good Luck !!
Many thank to ililaoban for this TWRP:
ililaoban said:
https://mega.nz/#!QJkBgC5Q!PVw1vQt1yCnaDFai_Qlj_OxyNg8xzo95yMGcMiFE4_c
try this
Click to expand...
Click to collapse
It works without red write.
I mounted my supersu without issues.
guys i have SM-J700F/DD, i'm facing blank screen after samsung logo..after flashing linage 14.1 downloaded rom from xda web..
pls help me how to solve it??
shr!pad said:
guys i have SM-J700F/DD, i'm facing blank screen after samsung logo..after flashing linage 14.1 downloaded rom from xda web..
pls help me how to solve it??
Click to expand...
Click to collapse
did you follow the instruction one by one how to flash it? enter twrp then format the phone then flash back the lineage rom...
yes followed same procedure.. but same problem blank screen after samsung logo ..!!!
i formatted cache,system,data,dalvik-cache.. after install the rom.. then reboot phone.. same problem blank screen.
pls kindly help for solution..
Were you on Marshmallow before flashing?
Sent from my SM-J700F using Tapatalk
Also facing similar issue on J700P after attempting to flash Lineage on Marshmallow. Will only boot to TWRP. Recovery is not seandroid enforcing.
Have since gone on to a J727P but would still like to get the 700 going.
hi, I also have the problem for J7108 install twrp, could you please advise which twrp version you installed finally?
naorsal said:
hello i have galaxy j7108
my android version is 6.0.1
and I've tried to root my phone many times but when i flash this file
/twrp-3.0.2-0-j7elte.img.tar.
with the odin it's pass but when the phone is up it's say recovery is not seandroid enforcing error and the phone up but not to the twrp recovery..
what i need to do please help
if it's help i've worte what appears me when I'm on download mode:
Download Speed: Fast
Product Name: SM-J7108
CURRECT BINARY: Custom
SYSTEM STATUS: Custom
FPR Lock: Off
CROM SERVICE: Off
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0x0500)
RP SWREV : B:1 K:0 S:0
Click to expand...
Click to collapse
So I was attempting to use Google pay to pay at a store today (Left my wallet at home) and an update notification popped up. I thought I hit cancel because I was too distracted to read it I clicked continue. I was dumb enough to be impatient and restart my phone manually during the update which appears to have fried my OS because its stuck on the "Downloading... Do not turn off target" screen. Im trying to flash the factory OS onto the device but I get the error I have pasted below.
I have a feeling this has something to do with the version I downloaded to flash. I have AT&T so I went to Sammobile and looked for a firmware version that matches my carrier and model number. Its not on there so I figured I would try the only thing close.
Model of my phone: SM-N986U
Carrier: AT&T USA
The version I am trying to use: https://www.sammobile.com/samsung/g...M-N986U1/ATT/download/N986U1UES1CTL7/1112197/ (Again this is for the SM-N986U1 not sure if it makes a difference but its the only thing close I could find for AT&T)
Odin version: Odin3 v3.314
The error:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1401)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 9395 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)
Phone screen in Download mode says:
CARRIER: ATT
RPMD fuse set
RPMD PROVISIONED
CURRENT BINARY: Samsung Official
FRP LOCK : ON
WARRANTY VOID : 0x0
QUALCOMM SECUREBOOT : ENABLE
RO SWREV : B1 (1,1,1,1,1,1) K1 S1
SECURE DOWNLOAD : ENABLE
SPU[VALID] :5
HMD STATUS : NONE
DID : It does provide this number although Im not sure if its something that is personally important or of any risk providing (Let me know)
Things Ive tried include Rebooting phone into Flash Mode (Side button and volume up and down then up for continue). Running Odin as Admin, Restarting Odin, Different USB ports (all on the motherboard), and disconnecting PC from internet.
Again not sure why I cannot find an AT&T Firmware version for the SM-N986U and can only find one for an SM-N986U1 from Sammobile.
Any help much appreciated!
Use the t-mobile U version just don't flash the user data
Wrong section
TragikzM8 said:
So I was attempting to use Google pay to pay at a store today (Left my wallet at home) and an update notification popped up. I thought I hit cancel because I was too distracted to read it I clicked continue. I was dumb enough to be impatient and restart my phone manually during the update which appears to have fried my OS because its stuck on the "Downloading... Do not turn off target" screen. Im trying to flash the factory OS onto the device but I get the error I have pasted below.
I have a feeling this has something to do with the version I downloaded to flash. I have AT&T so I went to Sammobile and looked for a firmware version that matches my carrier and model number. Its not on there so I figured I would try the only thing close.
Model of my phone: SM-N986U
Carrier: AT&T USA
The version I am trying to use: https://www.sammobile.com/samsung/g...M-N986U1/ATT/download/N986U1UES1CTL7/1112197/ (Again this is for the SM-N986U1 not sure if it makes a difference but its the only thing close I could find for AT&T)
Odin version: Odin3 v3.314
The error:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1401)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 9395 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)
Phone screen in Download mode says:
CARRIER: ATT
RPMD fuse set
RPMD PROVISIONED
CURRENT BINARY: Samsung Official
FRP LOCK : ON
WARRANTY VOID : 0x0
QUALCOMM SECUREBOOT : ENABLE
RO SWREV : B1 (1,1,1,1,1,1) K1 S1
SECURE DOWNLOAD : ENABLE
SPU[VALID] :5
HMD STATUS : NONE
DID : It does provide this number although Im not sure if its something that is personally important or of any risk providing (Let me know)
Things Ive tried include Rebooting phone into Flash Mode (Side button and volume up and down then up for continue). Running Odin as Admin, Restarting Odin, Different USB ports (all on the motherboard), and disconnecting PC from internet.
Again not sure why I cannot find an AT&T Firmware version for the SM-N986U and can only find one for an SM-N986U1 from Sammobile.
Any help much appreciated!
Click to expand...
Click to collapse
I have the exact same problem, were you able to flash the new firmware version?
peyes said:
I have the exact same problem, were you able to flash the new firmware version?
Click to expand...
Click to collapse
TMobile firmware here
Download SM-N986U / Galaxy Note20 Ultra 5G SM-N986U TMB in Samfw - Samsung firmware download
SM-N986U / Galaxy Note20 Ultra 5G SM-N986U TMB samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
So I was attempting to use Google pay to pay at a store today (Left my wallet at home) and an update notification popped up. I thought I hit cancel because I was too distracted to read it I clicked continue. I was dumb enough to be impatient and restart my phone manually during the update which appears to have fried my OS because its stuck on the "Downloading... Do not turn off target" screen. Im trying to flash the factory OS onto the device but I get the error I have pasted below.
I have a feeling this has something to do with the version I downloaded to flash. I have AT&T so I went to Sammobile and looked for a firmware version that matches my carrier and model number. Its not on there so I figured I would try the only thing close.
Model of my phone: SM-N986U
Carrier: AT&T USA
The version I am trying to use: https://www.sammobile.com/samsung/g...M-N986U1/ATT/download/N986U1UES1CTL7/1112197/ (Again this is for the SM-N986U1 not sure if it makes a difference but its the only thing close I could find for AT&T)
Odin version: Odin3 v3.314
The error:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1401)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 9395 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)
Phone screen in Download mode says:
CARRIER: ATT
RPMD fuse set
RPMD PROVISIONED
CURRENT BINARY: Samsung Official
FRP LOCK : ON
WARRANTY VOID : 0x0
QUALCOMM SECUREBOOT : ENABLE
RO SWREV : B1 (1,1,1,1,1,1) K1 S1
SECURE DOWNLOAD : ENABLE
SPU[VALID] :5
HMD STATUS : NONE
DID : It does provide this number although Im not sure if its something that is personally important or of any risk providing (Let me know)
Things Ive tried include Rebooting phone into Flash Mode (Side button and volume up and down then up for continue). Running Odin as Admin, Restarting Odin, Different USB ports (all on the motherboard), and disconnecting PC from internet.
Again not sure why I cannot find an AT&T Firmware version for the SM-N986U and can only find one for an SM-N986U1 from Sammobile.
Any help much appreciated!
maybe you can search on samfw.com
Found the fix
Had to download this version for AT&T
Download latest firmware for Multi-CSC OYN: https://www.sammobile.com/samsung/ga...1CTL2/1034519/
glad to see that
i downloaded a tmo firmware from sammobile ,my is phone is at&t works great