I was wondering is I can flash the stock rom of XT1032 to my XT1034 and be a able to receive 3G signal. I bought this phone on Amazon and it was from Tesco, unlocked it but it doesn't receive 3G frequencies here in Europe . Will this work? This is my only phone so I want to be sure it works before I do something and brick it.
If you can find a stock XT1034 ROM you can restore everything very easily, so if you back up your data you don't have to worry about breaking anything.
Related
Hi All,
I accidently ordered Moto G US GSM version (XT1034).
On This fw: "Android 4.4.2 Blur_Version.172.44.4.falcon_umts.AWSRetail.en.US" works only 2G networks (in Europe). This is as expected.
On GPE fw phone cannot search\connect mobile network at all.
On another european fw same bahviour as on US one (only 2G connection as avaliable)
I have tried to flash only modems from various firmwares, but without any effect (nothing changes), So, as I understand - problem in GPE system.img.
Is it possible to run GPE on XT1034 (at least with 2G)?
I think that the 2G issue is hardware-related as the phone may not operate on the proper frequencies for europe.
Concerning your question: Try the MotoTool you find in the Original Android Development section. This might work.
Thanks for answer.
I have tried flahing modem image for my device XT1034 via recovery, but it didn't helped.
(Sorry, but I cannot write messages in appropriate developers threads)
I have been working on a friends phone and I need to figure out how I can flash it completely stock, but flash it to an XT1034 image. I have a 4.4.2 image but you can't revert from 4.4.3.
Does anyone have advice? I've been kinda removed from this phone for a while. It is the unlocked GSM version bought straight from the Moto store in the US.
I was running CM12 and restored my XT1034 to stock US retail firmware (4.4.3, updated to 4.4.4). However, now I can only get Edge data. I already checked (and re-entered) the APN for cricket wireless. How can I fix this?
Thanks.
Edit: preferred network is set to 3G
Hello all
I recently got a Moto G 4G XT1039 in the UK which was on the o2 network, which I've unlocked.
I want to use my Three network simcard, which works fine on stock firmware, BUT the baseband is o2's one, so with my three sim card the data works, but calls doesn't "mobile data not available" so...
Can I flash a stock standard baseband?
I've tried unlocked bootloader and installed CM12 but it get stuck in bootloop at the cm animation, so i've restored to stock... I'm oblivious what to do next?!?
Any help would be appreciated...
I just want calls to work!
Thanks in advance.
Ok i've read I need to intall cm11 first to get it to boot as cm12 just stuck in boot animation but for the life of me cant find any cm11 download links, anyone know any?
Thanks
Hi, please help, moto g xt1039 works fine on 2g calling.. but when select 3g or lte,
it doesn't connect call, always call ended automatically.. any solution please..??
Did you ever update the phone to 5.1 stock ?, if so it should work fine. If however you went straight from KitKat to CM12, that's your problem, the radio firmware needs to be updated. Links to it are in the stock image threads on this board.
After trying to flash stock firmware on my Moto G 4G XT1039 I ran a bat file found on here and accidentally put XT1032 firmware on my phone and to my surprise everything works fine bar 4G and as I have no coverage around here its no big loss, but what I am wondering is if the XT1039 Could take the GPE firmware for the XT1032?