nightmare trying to get CM12 to boot on 4g XT1039 - no calls but data works on stock - Moto G Q&A, Help & Troubleshooting

Hello all
I recently got a Moto G 4G XT1039 in the UK which was on the o2 network, which I've unlocked.
I want to use my Three network simcard, which works fine on stock firmware, BUT the baseband is o2's one, so with my three sim card the data works, but calls doesn't "mobile data not available" so...
Can I flash a stock standard baseband?
I've tried unlocked bootloader and installed CM12 but it get stuck in bootloop at the cm animation, so i've restored to stock... I'm oblivious what to do next?!?
Any help would be appreciated...
I just want calls to work!
Thanks in advance.

Ok i've read I need to intall cm11 first to get it to boot as cm12 just stuck in boot animation but for the life of me cant find any cm11 download links, anyone know any?
Thanks

Hi, please help, moto g xt1039 works fine on 2g calling.. but when select 3g or lte,
it doesn't connect call, always call ended automatically.. any solution please..??

Did you ever update the phone to 5.1 stock ?, if so it should work fine. If however you went straight from KitKat to CM12, that's your problem, the radio firmware needs to be updated. Links to it are in the stock image threads on this board.

Related

Wifi problem after GPE flash

Hi there!
Flashed GPE on my moto G, and had wifi problem, couldnt activate it
So i went back to STOCK firmware using a retail FR 4.4.2 version, flashed everything in fastboot manually with no pb, phone boots fine, but always no wifi activation is possible
Any help for me please?
thanks a lot
Post 3 should help.

[Q] Wont recognize SIM card after flashing rom on MOTO G PLEASE HELP!

Hello, i recently thought about flashing a rom on my phone, i did all the basic stuff unlock boot loader, root etc but when i put the file on my device i got stuck in a bootloop, so i panicked a little and went on to google to find a STOCK ROM for the moto g. I found one and flashed that instead, it did infact save my device and i was so happy at the point, but then i noticed that at the top on my task bar it said i had no signal on BOTH Sdcards when infact this phone only has 1!? (my o2 simcard was in at the time) Anyway i went into setting and it had above he wifi setting "Dual SIM settings" which i have never even seen before. Anyway i clikced on that and it says 'SIM1 Disabled' and below it says 'SIM2 Disabled' Also my Mobile DATA has vanished to. All this worked before i went and screwed up my device. Im kind of in a panic and really dont want to loose this phone :crying: :crying: Please can anyone help get me back my signal and data, other then that everything else is working normal.
Screenshots Attached.
Pastyslayer said:
Hello, i recently thought about flashing a rom on my phone, i did all the basic stuff unlock boot loader, root etc but when i put the file on my device i got stuck in a bootloop, so i panicked a little and went on to google to find a STOCK ROM for the moto g. I found one and flashed that instead, it did infact save my device and i was so happy at the point, but then i noticed that at the top on my task bar it said i had no signal on BOTH Sdcards when infact this phone only has 1!? (my o2 simcard was in at the time) Anyway i went into setting and it had above he wifi setting "Dual SIM settings" which i have never even seen before. Anyway i clikced on that and it says 'SIM1 Disabled' and below it says 'SIM2 Disabled' Also my Mobile DATA has vanished to. All this worked before i went and screwed up my device. Im kind of in a panic and really dont want to loose this phone :crying: :crying: Please can anyone help get me back my signal and data, other then that everything else is working normal.
Screenshots Attached.
Click to expand...
Click to collapse
You have flashed a single sim variant of the stock ROM on your device, find the dual sim version for your phone here: http://sbf.droid-developers.org/phone.php?device=14
Also, of course your data has gone as your phone has undergone a reset and firmware flash
All of them are not for 4.4.4 or does that not matter?
TechMinerUK said:
You have flashed a single sim variant of the stock ROM on your device, find the dual sim version for your phone here:
Also, of course your data has gone as your phone has undergone a reset and firmware flash
Click to expand...
Click to collapse
Absolutely. From experience, you must flash the dual sim variant. Unfortunately, there is 4.4.4 available, but only for the States. You might PM me the OTA update package and I'll be able to help.
Sent from my XT1022 using XDA Premium 4 mobile app
Cant find it?
Cant find any for O2 uk or retail UK or duel sim or even 4.4.4
I Messaged you please reply. im abit of a noob to this website haha

[Q] How to flash XT1033 baseband on CM11? + Flickering Problem

Hello,
I did many stupid things today:
1) Tried to encrypt my phone under CM11 and I lost everything
2) Installed GPE -> 5.0.1
3) So I lost my dual sim
4) Flashed again CM11.. still single sim
Seems that my baseband is MSM8626BP_1032.340.63.00R and I guess that the 1032 number means is the single sim version. Tried searching for answers but I couldn't find anything.
Appreciate any inputs to come back to have my second sim working.
Regards.
UPDATE: Tried flashing the Asian XT1033 Radio (http://forum.xda-developers.com/showthread.php?t=2649763) and still I have one sim . Also I have a flickering in the screen until I lock and unlock the phone.
This is the procedure I used to convert to GPE 5.0.1
http://forum.xda-developers.com/moto-g/general/guide-convert-brazilian-firmware-gpe-5-t2969472
Same Issue with you. dont know how to do it now.

[Q] Weird Issues on official Motorola 5.0.2 (brazilian)

Hello guys,
Well I have the most indescifrable issue with my Moto g (xt1032).
It was aquired with kitkat, the day 5.0.1 GPE was released I installed it, making it a xt1033 GPE.
When Motorola´s 5.0.2 was released (brazilian) I downgraded to 4.4.4, and went ahead and installed moto´s 5.0.2 for the camera..
The next day, all was going ok, wifi, gps, moblie data etc.. not a single issue.... I had made calls, sent sms, etc... but around 12:00m (lunchtime) I saw "emergency callls only".... (I have not cutted the sim card to fit in the phone).
At that time, I swapped sims, (I´m on Claro colombia, I put a Virgin Mobile Sim..) and it worked again. I could call, send messages and stuff.
But yesterday That Virgin mobile sim stopped working, Now I face the following notification: Selected network (Claro) Unavailable.
I also get another notification about Resticted mode changed.
and yet another notification that says my sim card cannot be used to register on said network.
And another notification that says cannot send mms without registering something.
And another notiication about Voice service disabled...
this is driving me crazy....
The first thing I thought was of factory resetting the phone, to no luck, as my phone gets stuck at the red exclamation android and never goes to recovery.
I tried to install Phillz recovery but I get fastboot errors.
My phone is rooted btw, bootloader unlocked.
Is this my fault? as in I did a massive screw-up, or is it the software or is it a change on the provider´s end? I dont know.
What would you recommend doing at this point?
I have entered test mode and selected GSM only, but no luck.
Please, please shine a light on me, searching for no service and specific notification content only guides me to kit kat issues, which I really don't know are applicable to lollipop.
Mercí for your attention guys, have a good night.
donlloreda said:
Hello guys,
Well I have the most indescifrable issue with my Moto g (xt1032).
It was aquired with kitkat, the day 5.0.1 GPE was released I installed it, making it a xt1033 GPE.
When Motorola´s 5.0.2 was released (brazilian) I downgraded to 4.4.4, and went ahead and installed moto´s 5.0.2 for the camera..
The next day, all was going ok, wifi, gps, moblie data etc.. not a single issue.... I had made calls, sent sms, etc... but around 12:00m (lunchtime) I saw "emergency callls only".... (I have not cutted the sim card to fit in the phone).
At that time, I swapped sims, (I´m on Claro colombia, I put a Virgin Mobile Sim..) and it worked again. I could call, send messages and stuff.
But yesterday That Virgin mobile sim stopped working, Now I face the following notification: Selected network (Claro) Unavailable.
I also get another notification about Resticted mode changed.
and yet another notification that says my sim card cannot be used to register on said network.
And another notification that says cannot send mms without registering something.
And another notiication about Voice service disabled...
this is driving me crazy....
The first thing I thought was of factory resetting the phone, to no luck, as my phone gets stuck at the red exclamation android and never goes to recovery.
I tried to install Phillz recovery but I get fastboot errors.
My phone is rooted btw, bootloader unlocked.
Is this my fault? as in I did a massive screw-up, or is it the software or is it a change on the provider´s end? I dont know.
What would you recommend doing at this point?
I have entered test mode and selected GSM only, but no luck.
Please, please shine a light on me, searching for no service and specific notification content only guides me to kit kat issues, which I really don't know are applicable to lollipop.
Mercí for your attention guys, have a good night.
Click to expand...
Click to collapse
Flash the full XT1033 BR firmware by downloading the following mirror:
https://drive.google.com/file/d/0B_2QjjWMyLghQm9vZ3hhS3Z3dUk/view ***Asia***
https://drive.google.com/file/d/0B_2QjjWMyLghV3hMYWVoSFo0WHc/view ***Brazil ***
I had the same issue (I'm also on Claro Colombia). All you need to do is flash the official Motorola Lollipop 5.0.2 and it'll be working fine.
Firmware 5.0.2 XT1032 http://www.filefactory.com/file/5i311qq8mguf/BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml.zip
Follow this guide: http://motoroot.890m.com/restore-stock/
Don't skip any step.
Thanks mate, will try and post results.
Anyway, just to know.. why does this happen?
Why is that the radio was working all right and suddenly went kaput?
Chefry22 said:
I had the same issue (I'm also on Claro Colombia). All you need to do is flash the official Motorola Lollipop 5.0.2 and it'll be working fine.
Firmware 5.0.2 XT1032 http://www.filefactory.com/file/5i311qq8mguf/BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml.zip
Follow this guide: http://motoroot.890m.com/restore-stock/
Don't skip any step.
Click to expand...
Click to collapse
Did as stated, but no luck. no network for me.
Gps, wifi and bluetooth are working fine though.
donlloreda said:
Did as stated, but no luck. no network for me.
Gps, wifi and bluetooth are working fine though.
Click to expand...
Click to collapse
Any Ideas? I´m in desperate need of using my phone, well you know.... as a phone

[XT1031 - Boost Mobile] No Radio (Data/Calls), no Wifi, no MEID/PRL/Network.

I'm new here but desperately need help. A bit ago I purchased a new Moto G from Boost Mobile, and activated it, the xt1031 cdma variant. It came with 4.4.4, however I installed the 5.0.2 soak test by putting the zip in the sd and installing via stock recovery.
I decided to go back to kitkat. I flashed the stock boost 4.4.4 firmware, no fails, all OKAYs via fastboot. However, the rom would not boot, it would be stuck on bootloader unlocked screen. I tried various times with the same result. I wanted kitkat so I read somewhere that someone had flashed xt1033 asia firmware and flashed xt1031 radios and it worked. I tried, to no success. I then tried to go back to the soak test 5.0.2 this time via custom CWM 6.0.4.7. It formatted system. It booted up but had no radio or signal, no network, even the MEID showed as 0 and everything else including Carrier, phone number, PRL, etc as unknown. Only wifi worked. I tried flashing the 4.4.4 again, a deodexed from SuperR (which I had flashed before). It boots up but now my wifi is stuck on turning on, wont turn on at all. Before this wifi issue happened I had flashed a xt1031 radios, and kernel, also tried a apn fix flashable zip. Is there anything I can do at all to get it back to ANY working rom but with working radios?
Same Issue
I have the same issue did you find out anything?

Categories

Resources