I have been working on a friends phone and I need to figure out how I can flash it completely stock, but flash it to an XT1034 image. I have a 4.4.2 image but you can't revert from 4.4.3.
Does anyone have advice? I've been kinda removed from this phone for a while. It is the unlocked GSM version bought straight from the Moto store in the US.
Related
I am giving one of my flashed phones that I was using on Page Plus Cellular (Boost Moto G XT1031) to a friend who wants to use it on Boost Mobile . The phone was flashed using using the procedure here- http://forum.xda-developers.com/showthread.php?t=2681166. The phone has the unlocked bootloader and is running stock VZ 4.4.4. I know that I have to change the SPC back to original (I saved it ) Can I simply flash it back from VZW 4.4.4 to one of the available earlier stock Boost stock roms 4.4.2, 4.4.3 (don't want to brick it) ?. Any help in making this phone useable on Boost Mobile is appreciated -Thanks.
You should just be able to change the SPL back to what it was originally and flash the factory firmware and be good to go. Do the factory activation after you flash *228 or whatever it is.
There was a filesystem change between 4.3 and 4.4.2 but if you are just flash 4.4 you should be fine. Just make sure to follow the appropriate flashing guide.
http://forum.xda-developers.com/showthread.php?t=2542219
If there were any other specific changes you had to make when changing to Page Plus in CDMA workshop you may have to revert those, but I don't think there really was.
OK. - I will give it try when the Boost Mobile XT1031 Moto G 4.4.4 ROM ( 4.4.4 Blur_Version.175.44.1.falcon_cdma.Boost.en.US) image shows up at one of the hosting sites mentioned in this thread - http://forum.xda-developers.com/showthread.php?t=2546251
CodyF86 said:
You should just be able to change the SPL back to what it was originally and flash the factory firmware and be good to go. Do the factory activation after you flash *228 or whatever it is.
There was a filesystem change between 4.3 and 4.4.2 but if you are just flash 4.4 you should be fine. Just make sure to follow the appropriate flashing guide.
http://forum.xda-developers.com/showthread.php?t=2542219
If there were any other specific changes you had to make when changing to Page Plus in CDMA workshop you may have to revert those, but I don't think there really was.
Click to expand...
Click to collapse
4.4.4 makes changes to the trustedzone. You will not be able to downgrade. You'll need to wait until boost 4.4.4 firmware is released.
Tthe stock Xt1031 Boost Moto G 4.4.4 rom is now available - http://forum.xda-developers.com/showpost.php?p=55651962&postcount=408, A quick run through of the procedures for flashing and any other changes (via DFS) to make the phone so that is can become activated on Bost Mobile is appreciated. - Thanks
gpz1100 said:
4.4.4 makes changes to the trustedzone. You will not be able to downgrade. You'll need to wait until boost 4.4.4 firmware is released.
Click to expand...
Click to collapse
Edit: Decided to return the phone.
I picked up a Consumer Celluar Moto G phone yesterday.
Following the guide on this site I flashed it to a stock android rom Android 4.4.3 Blur_Version.210.12.32.falcon_umts.Retail.en.US.
Phone updated to 4.4.4 over wifi
Then I put in my AT&T sim, unlocked it through a code on eBay, and it's not picking up any signal from AT&T.
I tried to flash it again with a different rom but it failed on the first step.
Is there any way to save this phone?
I flashed it with a differerent ROM and there was no change.
I was wondering is I can flash the stock rom of XT1032 to my XT1034 and be a able to receive 3G signal. I bought this phone on Amazon and it was from Tesco, unlocked it but it doesn't receive 3G frequencies here in Europe . Will this work? This is my only phone so I want to be sure it works before I do something and brick it.
If you can find a stock XT1034 ROM you can restore everything very easily, so if you back up your data you don't have to worry about breaking anything.
After trying to flash stock firmware on my Moto G 4G XT1039 I ran a bat file found on here and accidentally put XT1032 firmware on my phone and to my surprise everything works fine bar 4G and as I have no coverage around here its no big loss, but what I am wondering is if the XT1039 Could take the GPE firmware for the XT1032?
I flashed to Lollipop using the US Optimized 1.3 XT1032 rom thing that I downloaded from this website because for some odd reason, I can't flash soak test XT1031 roms. I couldn't get the Boost Mobile website or Boost Care to confirm my phone is indeed a Boost Mobile because its saying the MEID is invalid even though it is clearly a Boost phone. Anyways, I blame the Lollipop update that I did and decided to go back to stock, but I downloaded the stock from this XDA link here: (cant post link cause im a new user) and when I went ahead to flash it, it's giving me, "this is a XT1302" error.
Can anybody help me with this? I've never been so confused in my life.
Try flashing stock XT1031 firmware with fastboot.
Next time - don't flash firmware or ROMs that are for different devices.
motofirmware.center
Sent from my XT1031