I was running CM12 and restored my XT1034 to stock US retail firmware (4.4.3, updated to 4.4.4). However, now I can only get Edge data. I already checked (and re-entered) the APN for cricket wireless. How can I fix this?
Thanks.
Edit: preferred network is set to 3G
Related
I changed the baseband of my Xoom from GSM/UMTS to USA by a mistake.
No Idea how to reset this to european settings.
The mistake happened using the app "Netzwerk" by Phillipp Mangelow.
Since then there is no chance to get an internet connection.
All settings i can directly access are ok.
The above named app has an error and offers only "USA" as selection of baseband.
Has anyone an idea how to reset this or knows an app which modifies this setting?
Xoom without radio is not even a half xoom
Kind regards,
Willy
Try tiamat new rom, there is a possibility to change it back to EURO mode
Hi,
i use a international version of motorola xoom mz601 in india and have updated to android 3.1 and use the latest baseband n_01.83.35p.
after this update the band changed to USA band 800Mhz? i cannot use any network 2G or 3G and the motorola doesn't show any network operators.
i really want to revert back the settings.now how can i downgrade my baseband and what commands i need to execute also i have tried moving to stock 3.0.1 but no change in baseband.
any apk file that would help me change the band?
thank you.
Please help
If you are rooted, and if you have a previous backup done thru recovery before, just go to recovery, advanced restore and restore system only. It should bring back your baseband.
Sent from my MZ601 using Tapatalk 2
What I did was go back to a stock 3.1 provider firmware. Being in India I used Original rom. I flashed boot, system, data and recovery. At that point the 3g radio still wont work, Let it do the OTA updates to bring it to 3.2.2 and it will start working, I think one of the OTA updates flashes the modem and or bootloader and resets it to the correct band.
I could then go back to a custom rom and it was all good, I make sure I stay away form the band settings in future.
I'm running the KitKat+ ROM I found in the development section plus faux kernel, I flashed over jellybean and applied fix v2 so I'm getting no problems uninstalling apps or entering security settings. Thing is when I'm at home or even outside I get really slow network speeds of about 0.4 Mbps down,and in settings-aboutphone-status it switches between hspa and hspa+,but down the road about 350 metres at my kids school I get up to 7 Mbps down,I'm just wondering what version of the moto g is this KitKat+ rom based on,I own the UK retail version and was thinking if its based on a us version would it cause problems with connecting to a UK network or have problems with hspa+ in the UK based on what base this ROM is using,just throwing it out there.
Have you tried setting it to GSM auto (PRL) ?
My previous phone (HTC One X+) was running BlackBean rom and was set to CDMA by default, meant that i had to reset to GSM after every reboot.
I have experienced this also on a UK XT1032 running US Global GSM 4.4.2 - Data works but often slowly and stops entirely for periods of time. I had assumed it was the ROM and I'm waiting for the UK 4.4.2 stock firmware image which I expect will solve it. Perhaps unrelated, but I've noticed Opera Mini will not work over 3G in this ROM, but it works fine on Wifi.
EDIT: I was just thinking; that by fastboot flashing the Stock US firmware image, the UK modem firmware may also have been replaced. That could explain the problems. Flashing back the 4.4.2 UK modem firmware might fix it.
My Baseband version:
MSM8626BP_1032.340.63.00R
Can someone with a US Global GSM XT1032 confirm their Baseband version? Nevermind, confirmed via google. UK Tesco XT1032 running 4.4.2 also has the same Baseband version.
You could try flashing the UK stock 4.4.2 'NON-HLOS.bin' which appears to include the modem firmware. However if I remember correctly, flashing an incorrect radio firmware is one of the few ways to irrecoverably brick a handset.
Safest bet is to wait for the full UK stock 4.4.2 firmware image and fastboot flash that. In future when you flash a different ROM, i.e CM11, you are likely to use CWM/TWRP and the existing UK modem / radio firmware will remain untouched.
If someone wants to correct me on this, please do.
Unlocked D850 for TMO now I can't get LTE with AT&T, TMO LTE works fine. I have both AT&T and TMO sim cards . I'm running Stock KK rooted . I did upgrade to lollipop and still no LTE on AT&T, but lost root so I downgraded back to KK via LG Flash Tool.
I tried a few different APN's with no luck. IDK any help would be appreciated
jaymn88 said:
Unlocked D850 for TMO now I can't get LTE with AT&T, TMO LTE works fine. I have both AT&T and TMO sim cards . I'm running Stock KK rooted . I did upgrade to lollipop and still no LTE on AT&T, but lost root so I downgraded back to KK via LG Flash Tool.
I tried a few different APN's with no luck. IDK any help would be appreciated
Click to expand...
Click to collapse
Which APN's did you try??
I tried the nxtgenphone that was the default one when I put my AT&T sim in. Also tried "phone", this one I get 4g but not lte. I also found one that was either "pto" or "pta" I think it was "pta" this one I get no data at all, same with the "nxtgenphone"
http://forum.xda-developers.com/showpost.php?p=59377527&postcount=1885
Hi,
I am in Australia and I got an unlocked Spring Galaxy S5 g900p which I was using with Vodafone AU on 4G.
Last night I updated to the latest g900p firmware using Odin to get the stagefright patch and afterwards I am only getting 3G. The "Global" network mode is gone and was replaced with "Automatic." Is there a way in the system where I can re-enable "Global" or atleast LTE Band 3? I am rooted with the latest stock firmware.
Any help is appreciated.
Thanks.
you can, but apparently you need to do some work with odin.
Check here
http://forum.xda-developers.com/spr...sim-unlocking-sprint-galaxy-s5-g900p-t3085624
I have a US version MM LTE Nvidia Shield tablet. After the recent update I don't have LTE anymore on my tablet. I have tried to go into Cellular network setting and change the network type manually but the option is not there. I have also tried putting the SIM card into another tablet to ensure that it gets LTE and it does. (Samsung Note Pro 12.2). I have also hard reset and even flashed the MM firmware to see if it was a software issue. Still can't get LTE. I have verified that it only connected to the HSDPA network in the Settings > About Tablet > Status > SIM Status > Cellular Network Type.
I have also tried to download various apps to change the Cellular network type none have worked as of yet.
Does anybody else who has this tablet have the same issue?
If so can anybody recommend a good work around or good ROM to flash to alleviate this issue. I honestly rather go back to the previous firmware version to have LTE back.
Update
I flashed back to Lollipop and still have the same issue.
Update 2
I flashed the ROW version and able to select LTE recommended from Cellular network settings but still doesn't get LTE.
AllTheWay said:
I have a US version MM LTE Nvidia Shield tablet. After the recent update I don't have LTE anymore on my tablet. I have also hard reset and even flashed the MM firmware to see if it was a software issue.
I honestly rather go back to the previous firmware version to have LTE back.
Click to expand...
Click to collapse
Can you be more specific about which update you got? Are you using the US LTE firmware version 4.1? What method did you use to flash the firmware and did you use the full firmware or OTA?
Sent from my Nexus 6 using XDA-Developers mobile app
durgis said:
Can you be more specific about which update you got? Are you using the US LTE firmware version 4.1? What method did you use to flash the firmware and did you use the full firmware or OTA?
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
I received the Marshmallow 4.1 update from Nvidia. I am using the US LTE firmware version 4.1. Once I realized I was not getting LTE I then reflashed the device using the guide supplied by Nvidia and from the user guide posted on this link.
http://forum.xda-developers.com/shield-tablet/general/stock-recovery-images-ota-library-guides-t2988881
I was thinking of flashing the ROW LTE stock firmware on this device but I don't want to brick it.