[Completed] Samsung Galaxy S2-switching off after initial screen with a yellow triangle - XDA Assist

Samsung Galaxy S2 that I purchased from Australia having Gingerbread 2.3.4 on it.
Samsung Galaxy S2-switching off after initial screen displaying"Samsung Galaxy S2 I9100".
My phone initially had a problem of Flight mode-"No network or sim card was not reading".
To resolve that I did the following-
1. Factory Reset
2. Then rooted my phone following the following instructions- "galaxys2root.com/galaxy-s2-root/how-to-root-galaxy-s2-newworks-on-all-galaxy-s2-variants/" (which says to Download GalaxyS2RootNew.zip & then hitting Runme.bat), but was not able to successfully root my phone(through use of busybox).
3. After that I tried this method given on this - "galaxys2root.com/galaxy-s2-root/how-to-root-galaxy-s2-i9100-icsandroid-4-0/" (which says to flash the following Kernel- CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.tar using ODIN program). But this make my phon to not to restart again as this is for Ice Cream Sandwich(ICS) .
Pls help me how to reach the old state on my phone.
Let me know if any other information I can provide with.
Currently by pressing Power+Menu+Volume up button I can enter CWM-based Recovery v 5 .0 .2 .7
Thanks in advance..

XDA Visitor said:
Samsung Galaxy S2 that I purchased from Australia having Gingerbread 2.3.4 on it.
Samsung Galaxy S2-switching off after initial screen displaying"Samsung Galaxy S2 I9100".
My phone initially had a problem of Flight mode-"No network or sim card was not reading".
To resolve that I did the following-
1. Factory Reset
2. Then rooted my phone following the following instructions- "galaxys2root.com/galaxy-s2-root/how-to-root-galaxy-s2-newworks-on-all-galaxy-s2-variants/" (which says to Download GalaxyS2RootNew.zip & then hitting Runme.bat), but was not able to successfully root my phone(through use of busybox).
3. After that I tried this method given on this - "galaxys2root.com/galaxy-s2-root/how-to-root-galaxy-s2-i9100-icsandroid-4-0/" (which says to flash the following Kernel- CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.tar using ODIN program). But this make my phon to not to restart again as this is for Ice Cream Sandwich(ICS) .
Pls help me how to reach the old state on my phone.
Let me know if any other information I can provide with.
Currently by pressing Power+Menu+Volume up button I can enter CWM-based Recovery v 5 .0 .2 .7
Thanks in advance..
Click to expand...
Click to collapse
I'm not quite sure about what you really want.
"reach the old state"?!
If you just want to remove the yellow triangle (and reset the custom flash counter), then use TriangleAway app.
If you want to unroot your phone, install SuperSU app from Play store and use the complete unroot option in this app.
If you want to have complete stock firmware back on your phone, get it from the [Stock Official Firmwares] I9100XWMS2 (4.1.2) - Slovenia (MOT) [05-01-14] thread and flash it with Odin.
Good luck !

Revert to the earlier state means restore phone to stable working state
Thanks for the links...I am not that much tech savvy..I will try to run the following firmware as provided in the link provided by you-
"I9100XWLP8 Mod Edit link remove
Base Firmware: I9100XWLP8 (4.0.3)
Region Australia*
Carrier: Optus (OPS)
Build Date: 6th April 2012
Modem: XXLPS
CSC: OPSLP4
Change List: 356487
CF-Root v5.4 LP7 (Works with LP8!)"
Hope the above firmware will work fine for my Samsung GalaxyS2.
Could you help me with the Odin to flash the above firmware...
Thanks

Nik_613 said:
Thanks for the links...I am not that much tech savvy..I will try to run the following firmware as provided in the link provided by you-
"I9100XWLP8 Mod Edit link remove
Base Firmware: I9100XWLP8 (4.0.3)
Region Australia*
Carrier: Optus (OPS)
Build Date: 6th April 2012
Modem: XXLPS
CSC: OPSLP4
Change List: 356487
CF-Root v5.4 LP7 (Works with LP8!)"
Hope the above firmware will work fine for my Samsung GalaxyS2.
Could you help me with the Odin to flash the above firmware...
Thanks
Click to expand...
Click to collapse
Please post in the S2 Help thread.
There you will get best advices.
My tapatalk signature:
Device: SGS5 (SM-G900F)
ROM: AllianceROM v5.6
Kernel: Stock G900FXXU1ANG2
Recovery: TWRP by Ktoonsez
Modem: G900FXU1ANG7
If you have any question about or any issue with your SGS2, just ask in the New members friendly Q&A thread.
... for the SGS5, just ask in the Noob friendly S5 All in one support thread
If you need general help/assistence, please go to XDA-Assist.

Thread closed and thank you!

Related

[Q] Help required upgrading my tab from Froyo to Gingerbread 2.2.3

Hi guys:
I recently bought a used T Mobile tab (model: SGH-T849). I am very tempted to upgrade it to Gingerbread 2.3.3. Just so you know i am currently located in Pakistan (Asia).
Current details on my tab say the following:
Model Number: GT-P1000
Firmware Version: 2.2
Baseband Version: P1000XXJHA
Kernel Version: 2.6.32.9 [email protected]#1
Build Number: FROYO.XXJMA
On checking *#1234# it displays:
PDA: (blank)
Phone: P100XXJHA
CSC: (blank)
After reading various forums, videos, manuals I think I am ready to upgrade it myself. The problem is that i want to upgrade to "P1000DXJPI" which i believe is the Samsung Tab Original Asia Gingerbread 2.2.3 release.
I have tried downloading P1000DXJPI from 4shared (P1000DXJPI.7zip):
(download failed at 53%.) Can you suggest a new and complete download link?)
a) Will this firmware technically work on my version of the tab
b) Which is the correct tar. (for firmware: P1000DXJPI) to download?
c) Which PIT. file to use with this firmware version- (gt-p1000_mr_PIT.zip????)
d) Odin 1.7 or 1.6
e) What "dbdata" file to use if it and tar. files already not the samething.
f) Do i need any CSC file? If Yes then which one and what does it do?
I know these are a lot of questions but before I go ahead and upgrade I need more and accurate information. I will be obliged if some expert on tab could help this noob.
Thank you
(PS: please guide me to complete article having the information i am looking for)
just so you know, i was able to successfully download the following 2 files. Now what do i exactly do with them?
P1000TDXJP4_P1000TDXJP1_P1000TOLBJP3_HOME
P1000DXJPI.7z
BUMP........ any help guys?
(The message you have entered is too short. Please lengthen your message to at least 10 characters.)
Yes i did it
Guys looking for updating their GT-P1000 from Froyo to GingerBread:
Just go download "Mobile Odin Pro" from some blackmarket link.
Get the firmware for Gingerbread 2.3.3 you want to install. Upload it to you tab's disk (not the external sd card).
Start Mobile Odin Pro. It will ask you to update some software extensions based on your mobiles version and then all you need to do is to search the firmware file on you phone and select it automatically.
and then flash it. That's pretty much it.
Cons: this Mobile Odin Pro currently only works for few (3/4) Samsung mobiles. GT-P1000 happens to be one of them
Remember: Try to open the zip file on you computer and make sure to update all the required files after extracting the zip file. You can always create a new zip or rar to upload to you cell.
In case of any questions feel free to contact me. ([email protected]) or PM me if they don't ban me
and for the bloody senior xda developers.. thank you for your no support for my original query. You guys suck!!!! (now sue me)
P.S: i am working on finding a solution to update GT-P1000 to icecreamsandwich custom. If i have the updates i will gladly share them with you. Thank you
Can any one provide me a "free" download link for:
CSC: P1000OJPJJ1
Phone: P1000JXJJ1
Actually these are part of the official "Froyo 2.2" GT-P1000 in Pakistan (Carrier: Mobilink). I was having signal problems with other Gingerbread 2.3.3 roms i updated.
I want to downgrade to Froyo with "P1000JPJJ1" rom (which i have), however cant seem to find the exact CSC and Modem file.
I will also appreciate if some one can advice me on how to get the modem settings saved from an official tab and transferred to my tab.
Please correct me if i am wrong.. i order to get my signals working, i have to have the correct modem file? right combination will be:
Base Band: P1000JXJJ1
Kernal: 2.3.32.9 [email protected]#1
Build No: Froyo.JPJJ1
*#1234# would then show:
PDA: P1000JPJJ1
Phone: P1000JXJJ1 (Required)
CSC: P1000OJPJJ1 (Required)
Any help will be highly appreciated

Official European stock firmware for GT-P5110

SamFirmware now has Dutch stock firmware for the GT-P5110 model as well: http://www.hotfile.com/dl/160305605/2058e02/P5110XWALD2_P5110PHNALD1_PHN.zip.html
GT-P5110 - Netherlands
PDA: P5110XWALD2
CSC: P5110PHNALD1
Version: 4.0.3
Date: 2012-04-24
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
This is official firmware that was released through Kies.
Installing this when coming from a custom ROM:
1. Boot in recovery and do a factory reset/wipe cache/wipe dalvik
2. Boot in download mode
3. Extract firmware on your computer and open odin
4. Connect your tablet
5. Put the firmware file in PDA in odin
6. Flash and reboot
Thanks for sharing that now i can get polaris office back
the_one_ said:
Thanks for sharing that now i can get polaris office back
Click to expand...
Click to collapse
Yeah have been trying to get polaris back myself, no luck so far.
can i install it (http://www.teamandroid.com/2012/09/...p5110-xxblh4-android-404-ota-firmware-update/) if i have this firmware ( posted on this discussion = P5110XWALD2 ) ?
+1
Sent from my GT-P5110 using xda premium
Hello Everyone,
I tried to flash my tab 2 back to stock , but now it is not working anymore.
It boots until the samsung logo and then does not work anymore. (it shows galaxy tab and logo with sound).
When I push on/off button it resets and then it starts again until the samsung logo.
Turning of is also not possible. Entering odin with power volume up down does not work either (unit boots on).
When I connect it to PC and press off, it start loading (icon appears) and after unplugging it stays off.
Windows however reports : Found new hardware OMAP4430.
Help what to do??????:crying::crying::crying:
ahamay said:
Hello Everyone,
I tried to flash my tab 2 back to stock , but now it is not working anymore.
It boots until the samsung logo and then does not work anymore. (it shows galaxy tab and logo with sound).
When I push on/off button it resets and then it starts again until the samsung logo.
Turning of is also not possible. Entering odin with power volume up down does not work either (unit boots on).
When I connect it to PC and press off, it start loading (icon appears) and after unplugging it stays off.
Windows however reports : Found new hardware OMAP4430.
Help what to do??????:crying::crying::crying:
Click to expand...
Click to collapse
I got in ODIN on my Tab. Pressed power + volume at splash screen. I'm running on stock rom again
Hello everyone! I have a question to ask.
On September 4, was released on SAMMOBILE, SWISS(switzerland) version 4.0.4 for GALAXY TAB P5110 2 10.1 P5110XXBLH4 that requires firmware P5110XWALD2 (downloadable from XDA) ... so my question is should I not solve every problem? That is, I explain you, I installed cyano10 but I did not like .. I decided to go back to the stock firmware but I did not find the Italian version on the web ... so I was advised by a guide on this forum to install the latest version of the tablet P5113 because between those two terminals only changes that the P5113 has the infrared. Then I ask me for a 100% stock firmware on Kies recognized with P5110, should I install the P5110XWALD2 and then update with version 4.0.4 P5110XXBLH4?
Is a better upgrade to the Swiss version P5110XXBLH4 or the latest version of Luxembourg P5110XXBLI1.
Let me know as soon as possible thanks!
Hi! I have a question!
If I have CWM installed on my P5110 and I flash a stock firmware,the CWM will be erased?
It could be useful to return to full stock configuration...
Tapatalked with my precious SGS One
Yes, that´s correct
Jhowlett said:
Hi! I have a question!
If I have CWM installed on my P5110 and I flash a stock firmware,the CWM will be erased?
It could be useful to return to full stock configuration...
Tapatalked with my precious SGS One
Click to expand...
Click to collapse
Thx =)
Tapatalked with my precious SGS One
Lost Stock Rom for GT-P5110
Folks, shame on me, but I lost my local copy of a German Samsung Stock ROM for my Galaxy Tab 10.1 2 and it's archived now at sammobile and only avail for premium users.
By any chance still anybody around who could help me pls?!? PN appreciated!
odoll said:
Folks, shame on me, but I lost my local copy of a German Samsung Stock ROM for my Galaxy Tab 10.1 2 and it's archived now at sammobile and only avail for premium users.
By any chance still anybody around who could help me pls?!? PN appreciated!
Click to expand...
Click to collapse
Can you share it's details ? I'm sure it'd be available at updato or you can use Samfirm app for pc
Re: Lost Stock Rom for GT-P5110
Hmm, what details are you looking for? (it's a Galaxy Tab 10.1 2 (GT-P5110) as mentioned in the title.)
But thx for the hints to updato or Samfirm . Haven't come across those, yet and will give it a try ...
odoll said:
Hmm, what details are you looking for? (it's a Galaxy Tab 10.1 2 (GT-P5110) as mentioned in the title.)
But thx for the hints to updato or Samfirm . Haven't come across those, yet and will give it a try ...
Click to expand...
Click to collapse
I was looking for the CSC version or something. Can you share the sammobile link of the ROM ? I can find it out in updato if you haven't already
ishtiak02 said:
I was looking for the CSC version or something. Can you share the sammobile link of the ROM ? I can find it out in updato if you haven't already
Click to expand...
Click to collapse
I need two Samsung Stock ROMs. One is the
https://www.sammobile.com/firmwares/gt-p5110/GT-P5110/DBT/
but as said, the sammobile page tells me "! This archived firmware is only available for premium users."
And the other Stock ROM I'm looking for is for the even older Galaxy Tab 10.1 (GT-P7510), again German ROM preferably, but maybe the Dutch version is the best match?
https://www.sammobile.com/firmwares/gt-p7510/GT-P7510/PHN/download/P7510XWLP5/253251/
odoll said:
I need two Samsung Stock ROMs. One is the
https://www.sammobile.com/firmwares/gt-p5110/GT-P5110/DBT/
but as said, the sammobile page tells me "! This archived firmware is only available for premium users."
And the other Stock ROM I'm looking for is for the even older Galaxy Tab 10.1 (GT-P7510), again German ROM preferably, but maybe the Dutch version is the best match?
https://www.sammobile.com/firmwares/gt-p7510/GT-P7510/PHN/download/P7510XWLP5/253251/
Click to expand...
Click to collapse
First one in case you haven't found them out yet: https://updato.com/firmware-archive-select-model?record=1839DEA321D611E6949E0CC47A44B7B2
2nd one: https://updato.com/firmware-archive-select-model?record=AFA23E2D228D11E6949E0CC47A44B7B2
You can always download stock ROMs from updato or samfirm app for free without throttling
Thx! Already dl and reflashed Stock ROM

Stock firmware

Hello,
I have a install a custom firmware on my SGS2 and now i want to return it back to original.
can you help me.
Phone: Samsung Galaxy S2
Model: GT-I9100
Current firmware: PDA:LPQ / Phone: LPQ / CSC: LPQ(KOR)
Android version:4.0.3
Baseband version: I9100XXLPQ
which stock firm i have to download and by the way i live in mauritius.
thx
shaqib said:
Hello,
I have a install a custom firmware on my SGS2 and now i want to return it back to original.
can you help me.
Phone: Samsung Galaxy S2
Model: GT-I9100
Current firmware: PDA:LPQ / Phone: LPQ / CSC: LPQ(KOR)
Android version:4.0.3
Baseband version: I9100XXLPQ
which stock firm i have to download and by the way i live in mauritius.
thx
Click to expand...
Click to collapse
well go sammobile
enter I9100 in search field and get stock rom to download you need an account there also get Odin/ .pit file/ instructions on this site
I really dont know the benefit from 10-posts limit but however... I have to post 10 posts before I can ask in Artemis ROM thread this question:
1.) To everyone how flashed with HSPL 3.03.00000, what RAM utilization do you have after opneing all tabs?
2.) To Sternas, Would it be a great idea to remove all the Windows Live and Marketplace apps which doesnt have any functionality since Microsoft gave Wndows Mobile up?
3.) To Sternas: Thank you for this ROM!

[ROMS] Updated: 17/08/2013 - Pre-Rooted / Original Stock Odin Packages!

I am currently implementing an alternate method of Rooting which I have found to be successful by means of Pre-Rooting the system.img file. I have previously released Pre-Rooted ROMs for the Galaxy S II and wanted to continue this development for the Galaxy S III.
Why use this Root Method? Well the main reasons are:
- You have a complete Odin Flashable ROM Package.
- No Insecure Kernels are used or required.
- You can flash these packages on Non-Rooted devices
- The Binary Flash Counter will NOT increase when flashing these ROM Packages.
- The Red Exclamation Mark will NOT appear at boot up.
- And finally, you only have to flash one file in Odin and you have a complete firmware including Root Permissions.
What Root Package is used in these ROMs?
- Busybox 1.20.2 (Newer ROMs)
- SuperSU 1.51 (Newer ROMs)
Previously released ROMs may have an older Busybox and SuperSU package installed.
Please Note: This Root Method does not include a Custom Recovery. This is for people who only require Root Permissions. If you do require a Custom Recovery, you will need to flash this yourself separately.
Click to expand...
Click to collapse
Just UnZip and Flash the '.tar.md5' File in Odin.
Password (All Packages): [email protected]
Click to expand...
Click to collapse
Note: If you are coming from a Custom ROM, remember to Wipe Data and Cache Partitions before flashing to avoid Boot Loops.
Modified Stock Packages:
(Modifications: Newest PDA Image and Modem and Pre-Rooted.)
Click to expand...
Click to collapse
Product Code: GT-I9305TADEVR (4.1.2) (EE UK)
PDA: XXBMD5
PHONE: XXBMD5
CSC: EVRBLL2
Link: Download (Dev-Host)
Product Code: GT-I9305TADEVR (4.1.2) (EE UK)
PDA: XXBMA6
PHONE: XXBLL5
CSC: EVRBLL1
Link: Download (Dev-Host)
Product Code: GT-I9305TADEVR (4.1.2) (EE UK)
PDA: XXBLL5
PHONE: XXBLL5
CSC: EVRBLL1
Link: Download (Dev-Host)
Product Code: GT-I9305TADEVR (4.1.2) (EE UK)
PDA: XXBLL3
PHONE: XXBLL3
CSC: EVRALI5
Link: Download (Dev-Host)
Product Code: GT-I9305TADEVR (4.1.1) (EE UK)
PDA: XXALK3
PHONE: XXALK2
CSC: EVRALI5
Link: Download (Dev-Host)
Original Stock Packages:
(Modifications: Pre-Rooted Only.)
Click to expand...
Click to collapse
Product Code: GT-I9305TADEVR (4.1.2) (EE UK)
PDA: XXBMF1
PHONE: BVBMF1
CSC: EVRBMF1
Link: Download (Dev-Host)
Product Code: GT-I9305TADEVR (4.1.1) (EE UK)
PDA: XXALI5
PHONE: BVALI5
CSC: EVRALI5
Released: 17/09/2012
Pre-Rooted Stock ROM: Download (Dev-Host)
Original Stock ROM: Download (Dev-Host)
If you find my Pre-Rooted Firmwares useful then please consider a small donation.
More To Come!
Great work It would be very good to also put out a release date of the official firmware. Just so we know what is the latest
excellent, i have the same version rom on my orange/EE S3 which means i can finally go ahead and root my device without fear of losing my stock branded firmware.
Just a quick question will a factory reset unroot the device in case i want to send it back ?
do I need to back up efs? new to andorid,thanks
do i need to back up efs? if so, seems root is required. but how can I get it rooted before I install this room ( other root method will change the binary record)
thanks
rhinocort said:
do i need to back up efs? if so, seems root is required. but how can I get it rooted before I install this room ( other root method will change the binary record)
thanks
Click to expand...
Click to collapse
lyriquidperfection said that he was working on an all in one root method for our device so wont be long hopefully
btemtd said:
Great work It would be very good to also put out a release date of the official firmware. Just so we know what is the latest
Click to expand...
Click to collapse
Code:
GT-I9305 VD2Germany (vodafone) I9305XXALI5 4.1.1 10.09.2012 08.09.2012 [b]142435[/b] Unlock
GT-I9305 TGYHong kong I9305ZHALI8 4.1.1 26.09.2012 23.09.2012 207066 Unlock
GT-I9305 DTMGermany (t-mobile) I9305XXALI7 4.1.1 22.09.2012 20.09.2012 205533 Unlock
GT-I9305 MM1N/a I9305XXALI9 4.1.1 27.09.2012 22.09.2012 215581 Unlock
GT-I9305 SINSingapore (singtel) I9305XXALI9 4.1.1 27.09.2012 22.09.2012 [b]215581 [/b]Unlock
GT-I9305 TGYHong kong I9305ZHALI7 4.1.1 21.09.2012 20.09.2012 177985 Unlock
GT-I9305 MOBAustria (a1) I9305XXALI5 4.1.1 10.09.2012 08.09.2012 142435 Unlock
GT-I9305 TCLPortugal (vodafone) I9305XXALI5 4.1.1 10.09.2012 08.09.2012 142435 Unlock
GT-I9305 DTMGermany (t-mobile) I9305XXALI5 4.1.1 10.09.2012 08.09.2012 142435 Unlock
GT-I9305 OPSAustralia (optus) I9305XXALI5 4.1.1 10.09.2012 08.09.2012 142435 Unlock
http://samsung-updates.com/device/?id=GT-I9305
If you look at changelist, you can see that this is not the latest firmware...
I never said it was latest. As its the only one on there for the time being then it has nowhere else to be except the top of the list!
Sent from my GT-I9305 using Tapatalk 2
lyriquidperfection said:
I never said it was latest. As its the only one on there for the time being then it has nowhere else to be except the top of the list!
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
so like I did not correct you
rhinocort said:
do i need to back up efs? if so, seems root is required. but how can I get it rooted before I install this room ( other root method will change the binary record)
thanks
Click to expand...
Click to collapse
The ROMS you find here are already rooted. Flash with Odin and enjoy your rooted device!
Sent from my GT-I9305 using Tapatalk 2
Is there any advantage to those of us already rooted and with a red "!" on our screens to flash this rom? Secondly, after flashing this rom, would flashing custom recovery raise the counter and or bring back the "!"?
Thanks.
Just a quick question really...Getting my i9305 on friday, and wondering how much bloat orange put into this firmware?
Cheers
I git mine from t mobile & there's very little from them. The vast majority is the usual Samsung bloatware you even get on unlocked phones. I think as t mobile & orange are sort of the same, you shouldn't expect much bloatware from them specifically
j0nnymoe said:
Just a quick question really...Getting my i9305 on friday, and wondering how much bloat orange put into this firmware?
Cheers
Click to expand...
Click to collapse
It's practically unbranded as this software is for EE network so everything is non specific towards t-mobile and orange.
Sent from my GT-I9305 using Tapatalk 2
Ahh nice, cheers. Will I need to backup my EFS partition after flashing this pre-rooted firmware?
j0nnymoe said:
Ahh nice, cheers. Will I need to backup my EFS partition after flashing this pre-rooted firmware?
Click to expand...
Click to collapse
Backup before or after. My roms are stock so you are safe either way.
Sent from my GT-I9305 using Tapatalk 2
Backing up efs folder is always a good idea and with our device you can even backup without root.
So which root method is the safest? I have something called GT-I9305N
This is all stock, did one OTA upgrade when I got the phone yesterday.
Sweden actually has two different 4G/LTE variants depending on operator, one for Telenor/Tele2(2600/900 MHz) and one for Telia (2600/800 MHz), where only LTE frequencies differ. Mine is from Comviq.se(Tele2 with prepaid variant due to I didn't want to change my subscription terms to some thing new&bad)
Any suggetions? THanks!
Product Code: GT-I9305OKDCOV
PDA: I9305NXXALIA
Phone: I9305NXXALI8
CSC: I9305NCOVALI7
Hi everyone, I received my new SGS3 I9305 from vodafone (germany) and I'm totally new in android.
I would like to get rid of the vodafone branding so would you recommend me to install this pre-rooted ROM? As I am really new, I would like to ask you something : can I install this ROM on my "Out of the Box" I9305?
Specifications of my phone :
AP:I9305XXALI5
CP:I9305BUALI6
CSC:I9305VD2ALI4
Thank you all.
Radder124 said:
Hi everyone, I received my new SGS3 I9305 from vodafone (germany) and I'm totally new in android.
I would like to get rid of the vodafone branding so would you recommend me to install this pre-rooted ROM? As I am really new, I would like to ask you something : can I install this ROM on my "Out of the Box" I9305?
Specifications of my phone :
AP:I9305XXALI5
CP:I9305BUALI6
CSC:I9305VD2ALI4
Thank you all.
Click to expand...
Click to collapse
You can but the only Rom available here at the moment is the UK EE Rom so it will only have Orange UK and T-Mobile UK APN settings. But this Rom is otherwise unbranded. No Network startup logos.
Sent from my GT-I9305 using Tapatalk 2
Ok, but I can change these APN settings with the good ones?

[Completed] My Samsung GalaxyGT19003 suddenly does not work on homeWiFi. Other phones are working

Myt Phone Particulars:
PDA 19003 DDLF2
Phone: 19003 DDE1
CSC: 19003o DDLF2 INU
Build info: Thursday, June 21.
09:53:31
K3T 2012.
MY original kernel version starts with: 2-6-35-7-CL1153545........... rrest I don't know
Unfortunately I changed my kernel version via ODIN without noting the original version.
The new kernel version I changed is: [email protected]_PC#14.
Still it is not working. What is the remedy.? Please answer. I am eagerly waiting.
My E mail ID: [email protected]
changed my kernel version
Hi,
I am assuming you mean i9003. If that's not right, disregard my link and please register on XDA and correct me.
If I'm right, and it's the i9003, This thread explains how to flash your stock firmware again with Odin.
*Legacy & Low Activity Devices*>Samsung Galaxy SL i9003*>*Galaxy SL i9003 General*>*[help] i9003 stuck in boot loop
You can register on XDA and ask for help in that thread also.
Good luck!

Categories

Resources