Database Info

[Q] Help required upgrading my tab from Froyo to Gingerbread 2.2.3

Hi guys:
I recently bought a used T Mobile tab (model: SGH-T849). I am very tempted to upgrade it to Gingerbread 2.3.3. Just so you know i am currently located in Pakistan (Asia).
Current details on my tab say the following:
Model Number: GT-P1000
Firmware Version: 2.2
Baseband Version: P1000XXJHA
Kernel Version: 2.6.32.9 [email protected]#1
Build Number: FROYO.XXJMA
On checking *#1234# it displays:
PDA: (blank)
Phone: P100XXJHA
CSC: (blank)
After reading various forums, videos, manuals I think I am ready to upgrade it myself. The problem is that i want to upgrade to "P1000DXJPI" which i believe is the Samsung Tab Original Asia Gingerbread 2.2.3 release.
I have tried downloading P1000DXJPI from 4shared (P1000DXJPI.7zip):
(download failed at 53%.) Can you suggest a new and complete download link?)
a) Will this firmware technically work on my version of the tab
b) Which is the correct tar. (for firmware: P1000DXJPI) to download?
c) Which PIT. file to use with this firmware version- (gt-p1000_mr_PIT.zip????)
d) Odin 1.7 or 1.6
e) What "dbdata" file to use if it and tar. files already not the samething.
f) Do i need any CSC file? If Yes then which one and what does it do?
I know these are a lot of questions but before I go ahead and upgrade I need more and accurate information. I will be obliged if some expert on tab could help this noob.
Thank you
(PS: please guide me to complete article having the information i am looking for)

just so you know, i was able to successfully download the following 2 files. Now what do i exactly do with them?
P1000TDXJP4_P1000TDXJP1_P1000TOLBJP3_HOME
P1000DXJPI.7z

BUMP........ any help guys?
(The message you have entered is too short. Please lengthen your message to at least 10 characters.)

Yes i did it
Guys looking for updating their GT-P1000 from Froyo to GingerBread:
Just go download "Mobile Odin Pro" from some blackmarket link.
Get the firmware for Gingerbread 2.3.3 you want to install. Upload it to you tab's disk (not the external sd card).
Start Mobile Odin Pro. It will ask you to update some software extensions based on your mobiles version and then all you need to do is to search the firmware file on you phone and select it automatically.
and then flash it. That's pretty much it.
Cons: this Mobile Odin Pro currently only works for few (3/4) Samsung mobiles. GT-P1000 happens to be one of them
Remember: Try to open the zip file on you computer and make sure to update all the required files after extracting the zip file. You can always create a new zip or rar to upload to you cell.
In case of any questions feel free to contact me. ([email protected]) or PM me if they don't ban me
and for the bloody senior xda developers.. thank you for your no support for my original query. You guys suck!!!! (now sue me)
P.S: i am working on finding a solution to update GT-P1000 to icecreamsandwich custom. If i have the updates i will gladly share them with you. Thank you

Can any one provide me a "free" download link for:
CSC: P1000OJPJJ1
Phone: P1000JXJJ1
Actually these are part of the official "Froyo 2.2" GT-P1000 in Pakistan (Carrier: Mobilink). I was having signal problems with other Gingerbread 2.3.3 roms i updated.
I want to downgrade to Froyo with "P1000JPJJ1" rom (which i have), however cant seem to find the exact CSC and Modem file.
I will also appreciate if some one can advice me on how to get the modem settings saved from an official tab and transferred to my tab.
Please correct me if i am wrong.. i order to get my signals working, i have to have the correct modem file? right combination will be:
Base Band: P1000JXJJ1
Kernal: 2.3.32.9 [email protected]#1
Build No: Froyo.JPJJ1
*#1234# would then show:
PDA: P1000JPJJ1
Phone: P1000JXJJ1 (Required)
CSC: P1000OJPJJ1 (Required)
Any help will be highly appreciated

Q - How to root/unroot GT-N7000

Hi guys,
I really need your help, i just bought SGN
android 2.3.6
baseband version N7000DXKL2
Kernel version 2.6.35.7-N7000DXLA1-CL886914 [email protected] #2
Build number Gingerbread.DXLA1
Can u'll give me an easy application to use for root/unroot my SGN, cause I plan to unroot it back when ICS is available soon.
i heard about superoneclick, seems easy to use but dont know what version should i use, maybe u'll can give me download link or others application.
Thanks

Try all the versions until it unroots your phone
Sent from my HTC Wildfire S using xda premium

Your reply is conveniently in the GT-N7000 forum
http://forum.xda-developers.com/showthread.php?t=1424997

Problems Unrooting my GT-N7000 Phone is bought in Norway (Unlocked & Unbranded)
Hi.. I just rooted my samsung galaxy note (GT-N7000) and now i have problems unrooting it.. Before i rooted the phone, i did not know that i needed to backup my files from my phone. I know, im stupid.. But now i have installed the stock rom for my phone.. I have installed the same firmware as other people from norway have on theyr phones.. yes i have checked But there is still one problem, the phone works ok until i connect it to "kies" then "Kies" tell`s me that "Your device does not support software upgrading via kies". So here is my question, how can i make my device support software upgrading via kies ?
Phone info:
PDA: N7000XXLC1
PHONE: N7000XXLB2
CSC: N7000OXXLB3
Build Info: Fri Mar 2 14:38:11 KST 2012
Modellnumber: GT-N7000
Android-Version: 2.3.6
Baseband-version: N7000XXLB2
Kernel-version: [email protected]#2
And all these numbers, is the same as other N7000 phones here in Norway.. So why dont my phone support software upgrading via Kies ?? And most importantly, how can i fix this problem. I am going to sell my phone, so i need it to be like when i bought it ?

Rom stock
You ought to flash a stock rom ... You can find it on samfirmware site ... You flash a stock firmware with Odin software ... The phone will be unrooted and kies will able to upgrade it ...
Excuse the my pronounce English but i'm an italian guy ...
---------- Post added at 11:42 PM ---------- Previous post was at 11:34 PM ----------
If do you have some problems do you try to flash a stock kernel with a stock recovery ...

Stock firmware

Hello,
I have a install a custom firmware on my SGS2 and now i want to return it back to original.
can you help me.
Phone: Samsung Galaxy S2
Model: GT-I9100
Current firmware: PDA:LPQ / Phone: LPQ / CSC: LPQ(KOR)
Android version:4.0.3
Baseband version: I9100XXLPQ
which stock firm i have to download and by the way i live in mauritius.
thx

shaqib said:
Hello,
I have a install a custom firmware on my SGS2 and now i want to return it back to original.
can you help me.
Phone: Samsung Galaxy S2
Model: GT-I9100
Current firmware: PDA:LPQ / Phone: LPQ / CSC: LPQ(KOR)
Android version:4.0.3
Baseband version: I9100XXLPQ
which stock firm i have to download and by the way i live in mauritius.
thx
Click to expand...
Click to collapse
well go sammobile
enter I9100 in search field and get stock rom to download you need an account there also get Odin/ .pit file/ instructions on this site

I really dont know the benefit from 10-posts limit but however... I have to post 10 posts before I can ask in Artemis ROM thread this question:
1.) To everyone how flashed with HSPL 3.03.00000, what RAM utilization do you have after opneing all tabs?
2.) To Sternas, Would it be a great idea to remove all the Windows Live and Marketplace apps which doesnt have any functionality since Microsoft gave Wndows Mobile up?
3.) To Sternas: Thank you for this ROM!

[Completed] [Q] s4 i9505 wifi won't work.

just bought this phone and went to do the setup and wifi turns on and after 1-2 minutes turns off and no more wifi. PLEASE HELP. what can I do? has 4.4.2 i9505XXUFNAD
VERSION SOFTWARE MDF v1.0 release 2

elcubanito66 said:
just bought this phone and went to do the setup and wifi turns on and after 1-2 minutes turns off and no more wifi. PLEASE HELP. what can I do? has 4.4.2 i9505XXUFNAD
VERSION SOFTWARE MDF v1.0 release 2
Click to expand...
Click to collapse
Here is dedicated forum for your device Samsung Galaxy S 4 & a dedicated thread for troubleshooting problems Samsung Galaxy S4 Help and Troubleshooting so post over there.
Thankyou.

help
Hitesh2626 said:
Here is dedicated forum for your device Samsung Galaxy S 4 & a dedicated thread for troubleshooting problems Samsung Galaxy S4 Help and Troubleshooting so post over there.
Thankyou.
Click to expand...
Click to collapse
Since I have 4.4.2 but from open Europe and I would like to install the firmmare from my country Costa Rica, and also I was told that this might fix it. Can I install this firmmare over the open europe?
I have now i9505XXUFNAD open Europe 4.4.2
change to PDA: I9505VJUFNC1 4.4.2
CSC: I9505ICEFNC1
MODEM: I9505VJUFNC1 Thanks for your help

elcubanito66 said:
Since I have 4.4.2 but from open Europe and I would like to install the firmmare from my country Costa Rica, and also I was told that this might fix it. Can I install this firmmare over the open europe?
I have now i9505XXUFNAD open Europe 4.4.2
change to PDA: I9505VJUFNC1 4.4.2
CSC: I9505ICEFNC1
MODEM: I9505VJUFNC1 Thanks for your help
Click to expand...
Click to collapse
Just post your further queries over above link thread so the experts may get you of your device.

Hi! So I'm rooted and I want to update my phone but when I try to do it, it says "Your device has been modified. Software updates are not available." So I reset my flash counter using Triangle Away and now it says 'official' and 'O' but still that modified blah blah is still appearing. How do you solve this?
Sent from my GT-I9505 using XDA Free mobile app

As i have already stated above links so please go through it .
Thread Closed, Thankyou.

[Completed] Samsung Galaxy S2-switching off after initial screen with a yellow triangle

Samsung Galaxy S2 that I purchased from Australia having Gingerbread 2.3.4 on it.
Samsung Galaxy S2-switching off after initial screen displaying"Samsung Galaxy S2 I9100".
My phone initially had a problem of Flight mode-"No network or sim card was not reading".
To resolve that I did the following-
1. Factory Reset
2. Then rooted my phone following the following instructions- "galaxys2root.com/galaxy-s2-root/how-to-root-galaxy-s2-newworks-on-all-galaxy-s2-variants/" (which says to Download GalaxyS2RootNew.zip & then hitting Runme.bat), but was not able to successfully root my phone(through use of busybox).
3. After that I tried this method given on this - "galaxys2root.com/galaxy-s2-root/how-to-root-galaxy-s2-i9100-icsandroid-4-0/" (which says to flash the following Kernel- CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.tar using ODIN program). But this make my phon to not to restart again as this is for Ice Cream Sandwich(ICS) .
Pls help me how to reach the old state on my phone.
Let me know if any other information I can provide with.
Currently by pressing Power+Menu+Volume up button I can enter CWM-based Recovery v 5 .0 .2 .7
Thanks in advance..

XDA Visitor said:
Samsung Galaxy S2 that I purchased from Australia having Gingerbread 2.3.4 on it.
Samsung Galaxy S2-switching off after initial screen displaying"Samsung Galaxy S2 I9100".
My phone initially had a problem of Flight mode-"No network or sim card was not reading".
To resolve that I did the following-
1. Factory Reset
2. Then rooted my phone following the following instructions- "galaxys2root.com/galaxy-s2-root/how-to-root-galaxy-s2-newworks-on-all-galaxy-s2-variants/" (which says to Download GalaxyS2RootNew.zip & then hitting Runme.bat), but was not able to successfully root my phone(through use of busybox).
3. After that I tried this method given on this - "galaxys2root.com/galaxy-s2-root/how-to-root-galaxy-s2-i9100-icsandroid-4-0/" (which says to flash the following Kernel- CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.tar using ODIN program). But this make my phon to not to restart again as this is for Ice Cream Sandwich(ICS) .
Pls help me how to reach the old state on my phone.
Let me know if any other information I can provide with.
Currently by pressing Power+Menu+Volume up button I can enter CWM-based Recovery v 5 .0 .2 .7
Thanks in advance..
Click to expand...
Click to collapse
I'm not quite sure about what you really want.
"reach the old state"?!
If you just want to remove the yellow triangle (and reset the custom flash counter), then use TriangleAway app.
If you want to unroot your phone, install SuperSU app from Play store and use the complete unroot option in this app.
If you want to have complete stock firmware back on your phone, get it from the [Stock Official Firmwares] I9100XWMS2 (4.1.2) - Slovenia (MOT) [05-01-14] thread and flash it with Odin.
Good luck !

Revert to the earlier state means restore phone to stable working state
Thanks for the links...I am not that much tech savvy..I will try to run the following firmware as provided in the link provided by you-
"I9100XWLP8 Mod Edit link remove
Base Firmware: I9100XWLP8 (4.0.3)
Region Australia*
Carrier: Optus (OPS)
Build Date: 6th April 2012
Modem: XXLPS
CSC: OPSLP4
Change List: 356487
CF-Root v5.4 LP7 (Works with LP8!)"
Hope the above firmware will work fine for my Samsung GalaxyS2.
Could you help me with the Odin to flash the above firmware...
Thanks

Nik_613 said:
Thanks for the links...I am not that much tech savvy..I will try to run the following firmware as provided in the link provided by you-
"I9100XWLP8 Mod Edit link remove
Base Firmware: I9100XWLP8 (4.0.3)
Region Australia*
Carrier: Optus (OPS)
Build Date: 6th April 2012
Modem: XXLPS
CSC: OPSLP4
Change List: 356487
CF-Root v5.4 LP7 (Works with LP8!)"
Hope the above firmware will work fine for my Samsung GalaxyS2.
Could you help me with the Odin to flash the above firmware...
Thanks
Click to expand...
Click to collapse
Please post in the S2 Help thread.
There you will get best advices.
My tapatalk signature:
Device: SGS5 (SM-G900F)
ROM: AllianceROM v5.6
Kernel: Stock G900FXXU1ANG2
Recovery: TWRP by Ktoonsez
Modem: G900FXU1ANG7
If you have any question about or any issue with your SGS2, just ask in the New members friendly Q&A thread.
... for the SGS5, just ask in the Noob friendly S5 All in one support thread
If you need general help/assistence, please go to XDA-Assist.

Thread closed and thank you!