Database Info

[Q] Help required upgrading my tab from Froyo to Gingerbread 2.2.3

Hi guys:
I recently bought a used T Mobile tab (model: SGH-T849). I am very tempted to upgrade it to Gingerbread 2.3.3. Just so you know i am currently located in Pakistan (Asia).
Current details on my tab say the following:
Model Number: GT-P1000
Firmware Version: 2.2
Baseband Version: P1000XXJHA
Kernel Version: 2.6.32.9 [email protected]#1
Build Number: FROYO.XXJMA
On checking *#1234# it displays:
PDA: (blank)
Phone: P100XXJHA
CSC: (blank)
After reading various forums, videos, manuals I think I am ready to upgrade it myself. The problem is that i want to upgrade to "P1000DXJPI" which i believe is the Samsung Tab Original Asia Gingerbread 2.2.3 release.
I have tried downloading P1000DXJPI from 4shared (P1000DXJPI.7zip):
(download failed at 53%.) Can you suggest a new and complete download link?)
a) Will this firmware technically work on my version of the tab
b) Which is the correct tar. (for firmware: P1000DXJPI) to download?
c) Which PIT. file to use with this firmware version- (gt-p1000_mr_PIT.zip????)
d) Odin 1.7 or 1.6
e) What "dbdata" file to use if it and tar. files already not the samething.
f) Do i need any CSC file? If Yes then which one and what does it do?
I know these are a lot of questions but before I go ahead and upgrade I need more and accurate information. I will be obliged if some expert on tab could help this noob.
Thank you
(PS: please guide me to complete article having the information i am looking for)

just so you know, i was able to successfully download the following 2 files. Now what do i exactly do with them?
P1000TDXJP4_P1000TDXJP1_P1000TOLBJP3_HOME
P1000DXJPI.7z

BUMP........ any help guys?
(The message you have entered is too short. Please lengthen your message to at least 10 characters.)

Yes i did it
Guys looking for updating their GT-P1000 from Froyo to GingerBread:
Just go download "Mobile Odin Pro" from some blackmarket link.
Get the firmware for Gingerbread 2.3.3 you want to install. Upload it to you tab's disk (not the external sd card).
Start Mobile Odin Pro. It will ask you to update some software extensions based on your mobiles version and then all you need to do is to search the firmware file on you phone and select it automatically.
and then flash it. That's pretty much it.
Cons: this Mobile Odin Pro currently only works for few (3/4) Samsung mobiles. GT-P1000 happens to be one of them
Remember: Try to open the zip file on you computer and make sure to update all the required files after extracting the zip file. You can always create a new zip or rar to upload to you cell.
In case of any questions feel free to contact me. ([email protected]) or PM me if they don't ban me
and for the bloody senior xda developers.. thank you for your no support for my original query. You guys suck!!!! (now sue me)
P.S: i am working on finding a solution to update GT-P1000 to icecreamsandwich custom. If i have the updates i will gladly share them with you. Thank you

Can any one provide me a "free" download link for:
CSC: P1000OJPJJ1
Phone: P1000JXJJ1
Actually these are part of the official "Froyo 2.2" GT-P1000 in Pakistan (Carrier: Mobilink). I was having signal problems with other Gingerbread 2.3.3 roms i updated.
I want to downgrade to Froyo with "P1000JPJJ1" rom (which i have), however cant seem to find the exact CSC and Modem file.
I will also appreciate if some one can advice me on how to get the modem settings saved from an official tab and transferred to my tab.
Please correct me if i am wrong.. i order to get my signals working, i have to have the correct modem file? right combination will be:
Base Band: P1000JXJJ1
Kernal: 2.3.32.9 [email protected]#1
Build No: Froyo.JPJJ1
*#1234# would then show:
PDA: P1000JPJJ1
Phone: P1000JXJJ1 (Required)
CSC: P1000OJPJJ1 (Required)
Any help will be highly appreciated

[Q] gingerbread upgrade

hi im from Puerto Rico.
I want to upgrade my Galaxy fit from froyo to gingerbread but i dont know what firmware works in my area (PR).

pittvr said:
hi im from Puerto Rico.
I want to upgrade my Galaxy fit from froyo to gingerbread but i dont know what firmware works in my area (PR).
Click to expand...
Click to collapse
Can you tell us what all is written in your "about phone", starting from the android version??

well, u can use this http://forum.xda-developers.com/showthread.php?t=1391749 its Gingerbread 2.3.6 but its from Chile (Claro Company) or use this http://www.youtube.com/watch?v=OzMf44-fnco this is 2.3.4 Gingerbread this is without any company.
Hope this helps u, and remember to press thanks button if this helped u
Y hola desde Mexico!

My "about phone"
Model Number: GT-S5670L
Android Version: 2.2.1
Baseband version: S5670LUYKC1
Kernel version: 2.6.32.9-perf
[email protected]#1
Build number: FROYO.UYKC1

You can flash any ROM you want. The procedure is simple.
1) Download any official firmware from here.
2) Download ODIN Multi Downloader (Google's your friend)
3) Connect your device in downloading mode.
4) Flash it via ODIN
Here's a video
http://www.youtube.com/watch?v=ThlLswWGFFU
but you should probably read this.
http://forum.xda-developers.com/showthread.php?t=1440974
Press the Thanks button if i helped you.

Thanks for the help to all,
I have another question, what are the difference between firmwares from diferents zone? And
Can i root after upgrade the OS?

not much of a difference
yes you can root

[q] stock rooted rom itv

hi guys! i have a big problem, even though i posted some useful tricks even here on xda i am not allowed to go to the development area so i am forced to ask here one simple thing, i need a stock pre rooted rom for my no brand itv galaxy note n8000
after doing #*1234* on my phone i post you my parameters
AP: N8000XXCMF1
CP: N8000XXCLL1
CSC: N8000ITVCMG1
i need a link to this exact rom prerooted firmware (no european i need itv) because i want to root without CWM, can anybody help me with the firmware i need?
thanx in advance!

No you will have to root one yourself .
sammobile.com or samsung-updates.com for stock roms

[Completed] Samsung Galaxy S2-switching off after initial screen with a yellow triangle

Samsung Galaxy S2 that I purchased from Australia having Gingerbread 2.3.4 on it.
Samsung Galaxy S2-switching off after initial screen displaying"Samsung Galaxy S2 I9100".
My phone initially had a problem of Flight mode-"No network or sim card was not reading".
To resolve that I did the following-
1. Factory Reset
2. Then rooted my phone following the following instructions- "galaxys2root.com/galaxy-s2-root/how-to-root-galaxy-s2-newworks-on-all-galaxy-s2-variants/" (which says to Download GalaxyS2RootNew.zip & then hitting Runme.bat), but was not able to successfully root my phone(through use of busybox).
3. After that I tried this method given on this - "galaxys2root.com/galaxy-s2-root/how-to-root-galaxy-s2-i9100-icsandroid-4-0/" (which says to flash the following Kernel- CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.tar using ODIN program). But this make my phon to not to restart again as this is for Ice Cream Sandwich(ICS) .
Pls help me how to reach the old state on my phone.
Let me know if any other information I can provide with.
Currently by pressing Power+Menu+Volume up button I can enter CWM-based Recovery v 5 .0 .2 .7
Thanks in advance..

XDA Visitor said:
Samsung Galaxy S2 that I purchased from Australia having Gingerbread 2.3.4 on it.
Samsung Galaxy S2-switching off after initial screen displaying"Samsung Galaxy S2 I9100".
My phone initially had a problem of Flight mode-"No network or sim card was not reading".
To resolve that I did the following-
1. Factory Reset
2. Then rooted my phone following the following instructions- "galaxys2root.com/galaxy-s2-root/how-to-root-galaxy-s2-newworks-on-all-galaxy-s2-variants/" (which says to Download GalaxyS2RootNew.zip & then hitting Runme.bat), but was not able to successfully root my phone(through use of busybox).
3. After that I tried this method given on this - "galaxys2root.com/galaxy-s2-root/how-to-root-galaxy-s2-i9100-icsandroid-4-0/" (which says to flash the following Kernel- CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.tar using ODIN program). But this make my phon to not to restart again as this is for Ice Cream Sandwich(ICS) .
Pls help me how to reach the old state on my phone.
Let me know if any other information I can provide with.
Currently by pressing Power+Menu+Volume up button I can enter CWM-based Recovery v 5 .0 .2 .7
Thanks in advance..
Click to expand...
Click to collapse
I'm not quite sure about what you really want.
"reach the old state"?!
If you just want to remove the yellow triangle (and reset the custom flash counter), then use TriangleAway app.
If you want to unroot your phone, install SuperSU app from Play store and use the complete unroot option in this app.
If you want to have complete stock firmware back on your phone, get it from the [Stock Official Firmwares] I9100XWMS2 (4.1.2) - Slovenia (MOT) [05-01-14] thread and flash it with Odin.
Good luck !

Revert to the earlier state means restore phone to stable working state
Thanks for the links...I am not that much tech savvy..I will try to run the following firmware as provided in the link provided by you-
"I9100XWLP8 Mod Edit link remove
Base Firmware: I9100XWLP8 (4.0.3)
Region Australia*
Carrier: Optus (OPS)
Build Date: 6th April 2012
Modem: XXLPS
CSC: OPSLP4
Change List: 356487
CF-Root v5.4 LP7 (Works with LP8!)"
Hope the above firmware will work fine for my Samsung GalaxyS2.
Could you help me with the Odin to flash the above firmware...
Thanks

Nik_613 said:
Thanks for the links...I am not that much tech savvy..I will try to run the following firmware as provided in the link provided by you-
"I9100XWLP8 Mod Edit link remove
Base Firmware: I9100XWLP8 (4.0.3)
Region Australia*
Carrier: Optus (OPS)
Build Date: 6th April 2012
Modem: XXLPS
CSC: OPSLP4
Change List: 356487
CF-Root v5.4 LP7 (Works with LP8!)"
Hope the above firmware will work fine for my Samsung GalaxyS2.
Could you help me with the Odin to flash the above firmware...
Thanks
Click to expand...
Click to collapse
Please post in the S2 Help thread.
There you will get best advices.
My tapatalk signature:
Device: SGS5 (SM-G900F)
ROM: AllianceROM v5.6
Kernel: Stock G900FXXU1ANG2
Recovery: TWRP by Ktoonsez
Modem: G900FXU1ANG7
If you have any question about or any issue with your SGS2, just ask in the New members friendly Q&A thread.
... for the SGS5, just ask in the Noob friendly S5 All in one support thread
If you need general help/assistence, please go to XDA-Assist.

Thread closed and thank you!

[Completed] Advice on installing new firmware to Samsung Galaxy S5

Hi everyone, I have some questions regarding my phone so here we go.
I have an S5 that I bought a couple of years ago with the following:
Model: SM-G900V
Android: 4.4.4
Baseband: G900VVRU1ANI2
I can't upgrade the Android version by going to the menu so I was thinking on installing a new firmware and found one on firmwarefile dot com but it has different values on PDA and CSC:
Android Version: 6.0.1
Product code: VZW (USA Verizon)
PDA: G900VVRU2DPD1
CSC: G900VVZW2DPD1
and another one with:
PDA: G900VVRU2DPG2
CSC: G900VVZW2DPG2
So in order to not screw it up:
Which firmware will work best for me?
By installing another firmware version, is there a chance my phone be no longer unlocked?
Does all firmware out there have the stock apps? (not a problem since I can be root and uninstall them)
What would be the maximum version available for my phone?
I'll appreciate any help provided, thanks in advance!

xVeLKaNx said:
Hi everyone, I have some questions regarding my phone so here we go.
I have an S5 that I bought a couple of years ago with the following:
Model: SM-G900V
Android: 4.4.4
Baseband: G900VVRU1ANI2
I can't upgrade the Android version by going to the menu so I was thinking on installing a new firmware and found one on firmwarefile dot com but it has different values on PDA and CSC:
Android Version: 6.0.1
Product code: VZW (USA Verizon)
PDA: G900VVRU2DPD1
CSC: G900VVZW2DPD1
and another one with:
PDA: G900VVRU2DPG2
CSC: G900VVZW2DPG2
So in order to not screw it up:
Which firmware will work best for me?
By installing another firmware version, is there a chance my phone be no longer unlocked?
Does all firmware out there have the stock apps? (not a problem since I can be root and uninstall them)
What would be the maximum version available for my phone?
I'll appreciate any help provided, thanks in advance!
Click to expand...
Click to collapse
Greetings and welcome to assist. I would normally recommend the latest firmware or the one that is the closest region to you. You can use this to download the latest firmware
https://forum.xda-developers.com/galaxy-s7/how-to/updato-largest-online-firmware-archive-t3413785
and flash through odin but you will need to re/root once you use odin. You could also use kies/smartswitch to upadte as well
Good Luck
Sawdoctor

sawdoctor said:
Greetings and welcome to assist. I would normally recommend the latest firmware or the one that is the closest region to you. You can use this to download the latest firmware
https://forum.xda-developers.com/galaxy-s7/how-to/updato-largest-online-firmware-archive-t3413785
and flash through odin but you will need to re/root once you use odin. You could also use kies/smartswitch to upadte as well
Good Luck
Sawdoctor
Click to expand...
Click to collapse
Thanks bud, I successfully updated my phone to 6.0.1 with no problem