Hi guys:
I recently bought a used T Mobile tab (model: SGH-T849). I am very tempted to upgrade it to Gingerbread 2.3.3. Just so you know i am currently located in Pakistan (Asia).
Current details on my tab say the following:
Model Number: GT-P1000
Firmware Version: 2.2
Baseband Version: P1000XXJHA
Kernel Version: 2.6.32.9 [email protected]#1
Build Number: FROYO.XXJMA
On checking *#1234# it displays:
PDA: (blank)
Phone: P100XXJHA
CSC: (blank)
After reading various forums, videos, manuals I think I am ready to upgrade it myself. The problem is that i want to upgrade to "P1000DXJPI" which i believe is the Samsung Tab Original Asia Gingerbread 2.2.3 release.
I have tried downloading P1000DXJPI from 4shared (P1000DXJPI.7zip):
(download failed at 53%.) Can you suggest a new and complete download link?)
a) Will this firmware technically work on my version of the tab
b) Which is the correct tar. (for firmware: P1000DXJPI) to download?
c) Which PIT. file to use with this firmware version- (gt-p1000_mr_PIT.zip????)
d) Odin 1.7 or 1.6
e) What "dbdata" file to use if it and tar. files already not the samething.
f) Do i need any CSC file? If Yes then which one and what does it do?
I know these are a lot of questions but before I go ahead and upgrade I need more and accurate information. I will be obliged if some expert on tab could help this noob.
Thank you
(PS: please guide me to complete article having the information i am looking for)
just so you know, i was able to successfully download the following 2 files. Now what do i exactly do with them?
P1000TDXJP4_P1000TDXJP1_P1000TOLBJP3_HOME
P1000DXJPI.7z
BUMP........ any help guys?
(The message you have entered is too short. Please lengthen your message to at least 10 characters.)
Yes i did it
Guys looking for updating their GT-P1000 from Froyo to GingerBread:
Just go download "Mobile Odin Pro" from some blackmarket link.
Get the firmware for Gingerbread 2.3.3 you want to install. Upload it to you tab's disk (not the external sd card).
Start Mobile Odin Pro. It will ask you to update some software extensions based on your mobiles version and then all you need to do is to search the firmware file on you phone and select it automatically.
and then flash it. That's pretty much it.
Cons: this Mobile Odin Pro currently only works for few (3/4) Samsung mobiles. GT-P1000 happens to be one of them
Remember: Try to open the zip file on you computer and make sure to update all the required files after extracting the zip file. You can always create a new zip or rar to upload to you cell.
In case of any questions feel free to contact me. ([email protected]) or PM me if they don't ban me
and for the bloody senior xda developers.. thank you for your no support for my original query. You guys suck!!!! (now sue me)
P.S: i am working on finding a solution to update GT-P1000 to icecreamsandwich custom. If i have the updates i will gladly share them with you. Thank you
Can any one provide me a "free" download link for:
CSC: P1000OJPJJ1
Phone: P1000JXJJ1
Actually these are part of the official "Froyo 2.2" GT-P1000 in Pakistan (Carrier: Mobilink). I was having signal problems with other Gingerbread 2.3.3 roms i updated.
I want to downgrade to Froyo with "P1000JPJJ1" rom (which i have), however cant seem to find the exact CSC and Modem file.
I will also appreciate if some one can advice me on how to get the modem settings saved from an official tab and transferred to my tab.
Please correct me if i am wrong.. i order to get my signals working, i have to have the correct modem file? right combination will be:
Base Band: P1000JXJJ1
Kernal: 2.3.32.9 [email protected]#1
Build No: Froyo.JPJJ1
*#1234# would then show:
PDA: P1000JPJJ1
Phone: P1000JXJJ1 (Required)
CSC: P1000OJPJJ1 (Required)
Any help will be highly appreciated
Related
hi im from Puerto Rico.
I want to upgrade my Galaxy fit from froyo to gingerbread but i dont know what firmware works in my area (PR).
pittvr said:
hi im from Puerto Rico.
I want to upgrade my Galaxy fit from froyo to gingerbread but i dont know what firmware works in my area (PR).
Click to expand...
Click to collapse
Can you tell us what all is written in your "about phone", starting from the android version??
well, u can use this http://forum.xda-developers.com/showthread.php?t=1391749 its Gingerbread 2.3.6 but its from Chile (Claro Company) or use this http://www.youtube.com/watch?v=OzMf44-fnco this is 2.3.4 Gingerbread this is without any company.
Hope this helps u, and remember to press thanks button if this helped u
Y hola desde Mexico!
My "about phone"
Model Number: GT-S5670L
Android Version: 2.2.1
Baseband version: S5670LUYKC1
Kernel version: 2.6.32.9-perf
[email protected]#1
Build number: FROYO.UYKC1
You can flash any ROM you want. The procedure is simple.
1) Download any official firmware from here.
2) Download ODIN Multi Downloader (Google's your friend)
3) Connect your device in downloading mode.
4) Flash it via ODIN
Here's a video
http://www.youtube.com/watch?v=ThlLswWGFFU
but you should probably read this.
http://forum.xda-developers.com/showthread.php?t=1440974
Press the Thanks button if i helped you.
Thanks for the help to all,
I have another question, what are the difference between firmwares from diferents zone? And
Can i root after upgrade the OS?
not much of a difference
yes you can root
Hello,
I have a install a custom firmware on my SGS2 and now i want to return it back to original.
can you help me.
Phone: Samsung Galaxy S2
Model: GT-I9100
Current firmware: PDA:LPQ / Phone: LPQ / CSC: LPQ(KOR)
Android version:4.0.3
Baseband version: I9100XXLPQ
which stock firm i have to download and by the way i live in mauritius.
thx
shaqib said:
Hello,
I have a install a custom firmware on my SGS2 and now i want to return it back to original.
can you help me.
Phone: Samsung Galaxy S2
Model: GT-I9100
Current firmware: PDA:LPQ / Phone: LPQ / CSC: LPQ(KOR)
Android version:4.0.3
Baseband version: I9100XXLPQ
which stock firm i have to download and by the way i live in mauritius.
thx
Click to expand...
Click to collapse
well go sammobile
enter I9100 in search field and get stock rom to download you need an account there also get Odin/ .pit file/ instructions on this site
I really dont know the benefit from 10-posts limit but however... I have to post 10 posts before I can ask in Artemis ROM thread this question:
1.) To everyone how flashed with HSPL 3.03.00000, what RAM utilization do you have after opneing all tabs?
2.) To Sternas, Would it be a great idea to remove all the Windows Live and Marketplace apps which doesnt have any functionality since Microsoft gave Wndows Mobile up?
3.) To Sternas: Thank you for this ROM!
I bought a P6800 in Kazakhstan. I have no idea which region it originally came from - its in a bog standard Samsung pack with English documentation and no regional labels or languages evident.
The P6800 is on Android 3.2.
I have tried to make it update software (by wifi and 3G) in Kazakhstan, Russia, UK, Denmark & Spain so far.
Each time, after the "connecting to server" dialogue, it returns "no update available".
KIES/internet doesn't indicate an available update either.
Any idea what Android it should be updating to, and/or if there is any region specific issue?
This is the data listed under "about device":
Baseband version:
P6800XXLA3
Kernel version:
2.6.36-P6800XXLA4-CL616407
[email protected]#3 SMP PREEMPT Thu Jan 5 21:02:55 KST 2012
Build number:
HTJ85B P6800XXLA4
if i'm not mistaken... its either from portugal or rusia firmware...
anyway you can download the latest firmware which is Ice Cream Sandwich from this thread
http://forum.xda-developers.com/showthread.php?t=1469635
and learn how to update your device via Odin software.
oh... one more thing... you can actually use any region firmware on your device
Update availability is determined by csc code not by country you attempt to update from. You can always update via odin if you want ICS and it isn't available for your tablet, there are plenty of guides around on how to do this just search the forums.
If you want to check your csc open phone app and dial *#1234#
Sent from my GT-N8000 using XDA Premium HD app
wc74 said:
Update availability is determined by csc code not by country you attempt to update from. You can always update via odin if you want ICS and it isn't available for your tablet, there are plenty of guides around on how to do this just search the forums.
If you want to check your csc open phone app and dial *#1234#
Sent from my GT-N8000 using XDA Premium HD app
Click to expand...
Click to collapse
The *#1234# does not work; gives "connection problem of invalid MMI code" (the phone app works fine otherwise)
Kies reports: "your device does not support software upgrading via Kies".
Kies shows the firmware version as: PDA:LA4 / PHONE:LA3 / CSC:KL1 (XSG)
Seems strange that there is no official Samsung way to update other than by using a third-party app such as Odin.
your CSC is XSG = United Arab Emirates...
Kies can only upgrade via region... as the smart software detected that you are not in the support region... that's why it report you dont have any software update.
so go and read my last post and download the firmware from that site and use odin to update...
btw... odin is not a 3rd party software... it is a maintenance software leak by samsung staff.
Code:
Odin was software that was first leaked back a couple years ago from Samsung. Samsung uses or used it to "flash" or "install" firmware/os/kernels/radio's onto the devices. Samsung still uses it or a form of it in certain releases as a Window's Upgrade Tool as its been known. Its still basically old Odin underneath a custom Window's UI skin.
Better stick to Honeycomb...
I made the mistake to update my P6800 to ICS with the result that I have endless troubles with WiFi now. I contacted the local Samsung Service Center and on monday I will be there to downgrade again and get back usable WiFi again. Looks like Samsung is not willing to fix the broken WiFi Stack in ICS on the Tab 7.7...
you can use ics but using HC modem files... you need to extract modem.bin files from HC firmware and flash it with odin.
No wifi probs for me on ICS
friedje said:
No wifi probs for me on ICS
Click to expand...
Click to collapse
Me either. You are better off giving ICS a try, the performance improvement alone is worthwhile. If you happen to have wifi problems you can always downgrade to HC.
Sent from my GT-N8000 using XDA Premium HD app
Samsung Galaxy S2 that I purchased from Australia having Gingerbread 2.3.4 on it.
Samsung Galaxy S2-switching off after initial screen displaying"Samsung Galaxy S2 I9100".
My phone initially had a problem of Flight mode-"No network or sim card was not reading".
To resolve that I did the following-
1. Factory Reset
2. Then rooted my phone following the following instructions- "galaxys2root.com/galaxy-s2-root/how-to-root-galaxy-s2-newworks-on-all-galaxy-s2-variants/" (which says to Download GalaxyS2RootNew.zip & then hitting Runme.bat), but was not able to successfully root my phone(through use of busybox).
3. After that I tried this method given on this - "galaxys2root.com/galaxy-s2-root/how-to-root-galaxy-s2-i9100-icsandroid-4-0/" (which says to flash the following Kernel- CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.tar using ODIN program). But this make my phon to not to restart again as this is for Ice Cream Sandwich(ICS) .
Pls help me how to reach the old state on my phone.
Let me know if any other information I can provide with.
Currently by pressing Power+Menu+Volume up button I can enter CWM-based Recovery v 5 .0 .2 .7
Thanks in advance..
XDA Visitor said:
Samsung Galaxy S2 that I purchased from Australia having Gingerbread 2.3.4 on it.
Samsung Galaxy S2-switching off after initial screen displaying"Samsung Galaxy S2 I9100".
My phone initially had a problem of Flight mode-"No network or sim card was not reading".
To resolve that I did the following-
1. Factory Reset
2. Then rooted my phone following the following instructions- "galaxys2root.com/galaxy-s2-root/how-to-root-galaxy-s2-newworks-on-all-galaxy-s2-variants/" (which says to Download GalaxyS2RootNew.zip & then hitting Runme.bat), but was not able to successfully root my phone(through use of busybox).
3. After that I tried this method given on this - "galaxys2root.com/galaxy-s2-root/how-to-root-galaxy-s2-i9100-icsandroid-4-0/" (which says to flash the following Kernel- CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.tar using ODIN program). But this make my phon to not to restart again as this is for Ice Cream Sandwich(ICS) .
Pls help me how to reach the old state on my phone.
Let me know if any other information I can provide with.
Currently by pressing Power+Menu+Volume up button I can enter CWM-based Recovery v 5 .0 .2 .7
Thanks in advance..
Click to expand...
Click to collapse
I'm not quite sure about what you really want.
"reach the old state"?!
If you just want to remove the yellow triangle (and reset the custom flash counter), then use TriangleAway app.
If you want to unroot your phone, install SuperSU app from Play store and use the complete unroot option in this app.
If you want to have complete stock firmware back on your phone, get it from the [Stock Official Firmwares] I9100XWMS2 (4.1.2) - Slovenia (MOT) [05-01-14] thread and flash it with Odin.
Good luck !
Revert to the earlier state means restore phone to stable working state
Thanks for the links...I am not that much tech savvy..I will try to run the following firmware as provided in the link provided by you-
"I9100XWLP8 Mod Edit link remove
Base Firmware: I9100XWLP8 (4.0.3)
Region Australia*
Carrier: Optus (OPS)
Build Date: 6th April 2012
Modem: XXLPS
CSC: OPSLP4
Change List: 356487
CF-Root v5.4 LP7 (Works with LP8!)"
Hope the above firmware will work fine for my Samsung GalaxyS2.
Could you help me with the Odin to flash the above firmware...
Thanks
Nik_613 said:
Thanks for the links...I am not that much tech savvy..I will try to run the following firmware as provided in the link provided by you-
"I9100XWLP8 Mod Edit link remove
Base Firmware: I9100XWLP8 (4.0.3)
Region Australia*
Carrier: Optus (OPS)
Build Date: 6th April 2012
Modem: XXLPS
CSC: OPSLP4
Change List: 356487
CF-Root v5.4 LP7 (Works with LP8!)"
Hope the above firmware will work fine for my Samsung GalaxyS2.
Could you help me with the Odin to flash the above firmware...
Thanks
Click to expand...
Click to collapse
Please post in the S2 Help thread.
There you will get best advices.
My tapatalk signature:
Device: SGS5 (SM-G900F)
ROM: AllianceROM v5.6
Kernel: Stock G900FXXU1ANG2
Recovery: TWRP by Ktoonsez
Modem: G900FXU1ANG7
If you have any question about or any issue with your SGS2, just ask in the New members friendly Q&A thread.
... for the SGS5, just ask in the Noob friendly S5 All in one support thread
If you need general help/assistence, please go to XDA-Assist.
Thread closed and thank you!
hi, i need help. i cant find a free download of a stock firmware.
i need this
Philippines Globe version
PDA: S7582XXUANK5
CSC: S7582OLBANK1
CHANGELIST: 2336126
BUILD DATE: 28.11.2014
i tried samsung updates, offers rapidgator, i always get error. upluad, file not found
cant download from other because it needs premium.
please comment a link
Thankyou
or previous firmware of GT-7582 Philippines Globe. Thankyou
You don't need a specific firmware version to update, just select any firmware for S7582 it will work fine, don't care about the country
It's better to use a non-carrier firmware version because carrier firmware usually have extra bloatware in it.
http://updato.com/firmware-archive-select-model?record=195F7A16212B11E6949E0CC47A44B7B2