Database Info

Galaxy ACE Wont boot :[

I have Galaxy ace
I wanted to switch to 2.3.3, so I downloaded the software ROM manager did flash. He asked me to pick and chose just Pelephone Pelephone, he wrote that he succeeded. After Flash went to Backup (backup), I clicked, boom turned off. I gave him a minute or two That's it.
BY THE WAY, you know what this Emergency MOD? Computer can recognize it is about this situation.

help?plzzzzzzzzzzzzzz

it seems that you tried to show some intelligence in flashing rom
who said you to flash with rom manager when the site clearly stated that you have to use odin to flash rom.
the only thing now you can try is putting you phone in download mode and flash with odin and follow the flash guide directions below-
1) Turn off your phone
2) Remove your SIM Card and SD Card
3) Extract previously downloaded firmware
4) Open ODIN 4.38 on your PC
5) Select from extracted archive: OPS, Boot, Phone, PDA, CSC (leave EFS and One Package empty)
Select OPS file : Cooper_v1.0.ops in his field.
Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md5
Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar.md5
6) Connect your phone via USB into PC
7) When the screen is turned on hold POWER+VOLUME DOWN+HOME and wait until the phone enters the Download Mode
8) If ODIN detected and recognised your phone should light up the first square to the left side
9) Press "Start" button and wait, the process should take 5-10 minutes
10) If all goes well your phone should reboot automatically
11) Square should change the color to blue and display "PASS" it means that flashing process was successful and we have the newest firmware
12) Disconnect your phone
13) Turn off your phone
14) Insert your SIM Card and SD Card again
15) Turn on your phone
16) Now you have the newest firmware!

Hey dude
tnx for hlp,but he dont get into download mode and recovery mod.
he Not Responding for nothing.
when i try to turn it on,recovery mod.download mod, he wont boot.

sorry to say but i think you bricked or semi-bricked your ace...

i got more then less same problem..
just have my galaxy ace GT-S5830
needed restart.. try turn on again... only thing he did was buzzing and samsung came in the screen lightning on and off... but wasnt able to continue to normal android menu...
i try a restart now
in small yellow i see downloading.. hope it works..
else i bring it back to the shop.. phone is just 1!! day old

guddu2011 said:
sorry to say but i think you bricked or semi-bricked your ace...
Click to expand...
Click to collapse
How to solve bricked SGA?

try this.. remove ur phone battery memory card and sim card .
Reinsert battery but do not turn on phone.
Start odin
Select OPS file : Cooper_v1.0.ops in his field.
Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md 5
Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar. md5
then connect your phone via usb and keep the volume down + power + home button pressed
this shud put ur phone in download mode
then click on Start button in ODIN and ur phone shud restart

alstonleo said:
try this.. remove ur phone battery memory card and sim card .
Reinsert battery but do not turn on phone.
Start odin
Select OPS file : Cooper_v1.0.ops in his field.
Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md 5
Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar. md5
then connect your phone via usb and keep the volume down + power + home button pressed
this shud put ur phone in download mode
then click on Start button in ODIN and ur phone shud restart
Click to expand...
Click to collapse
Facing the same problem, the critical point the mobile does not respond to power up (either turning on, recovery mode or even download mode), any help please??? I got this mobile less than month now

Samsung Galaxy Ace Wont Boot!!
when i press the power button of my galaxy ace, baring in mind the battery has charge, the empty battery indicator comes up and then the phones turns off straight away. i have tried flashing different versions of android hoping it was a buggy firmware but no luck. this also happens when plugging the phone into an ac power supply. any help?????????

If you cannot access the download mode or the recovery mode then your phone is bricked. All what you can do is go to the service center and pull up a nice story about how it happened while you were sleeping. If you are lucky enough, you will get a replacement.
Btw WRONG THREAD. THERE IS A SEPARATE ONE FOR THE ACE.
TeamCooper Developer
TheMyth Developer
www.teamcooper.net

Galaxy ACE only displaying the word "Android"
Same problem here, only I use Ubuntu 12 and was wondering if there is a way of re-flashing using download mode and Ubunu?

PB, LG optimus 3D only boot in CWM

Hello everbody, I have a problem with my phone an I hope you will be able to help me. I want to appologies myself for my english, I'm French
My phone only boot in the CWM menu (where i can choose if y want reset the factory profil,...) I hope you understand me.
I would like to unistal CWM but i don't know how.
I try installing o stock recovery from my SD card but it didn't work.
I really hope you will be able to help me if you need any other information juste ask

hello everyone, I am experiencing the same problem. After the OTA update when the phone restarted, it ended in the CWM menu and it is impossible to restart the system it always ends in the recovery mode, wanting an update.zip file that doesn't exist. Can anyone help please

Try to update with this method
http://forum.xda-developers.com/showpost.php?p=18082599&postcount=1
Plug phone in dowload mode (power off phone then vol up + power,if you see lg logo release buttons)

adixtra said:
Try to update with this method
http://forum.xda-developers.com/showpost.php?p=18082599&postcount=1
Plug phone in dowload mode (power off phone then vol up + power,if you see lg logo release buttons)
Click to expand...
Click to collapse
As i said before, the phone stays in the cwm recovery menu and doesn't do anything else. If i turn off the phone and then restart it while pressing the power button and the + button volume, it is detected by the pc and installs the drivers, but nothing else.
If i try to use your method, it doesn't communicate with the pc, phone disconnected, unavailable.
Isn't there any other way..

Ok I've managed to flash the phone. just needed windows xp to work correctly with the drivers.
thanks

adixtra said:
Try to update with this method
http://forum.xda-developers.com/showpost.php?p=18082599&postcount=1
Plug phone in dowload mode (power off phone then vol up + power,if you see lg logo release buttons)
Click to expand...
Click to collapse
Thanks to take time to help me. I've try following the step on your link but on the last step, when the official LG flasher is running, I have an message saying that my phone isn't connect with my computer.

Try to reinstall drives.Remove battery, plug phone to computer, press vol+ button and insert battery.

Is the phone suppose to turn on when i put the battery in?

If you put battery and you keep VOL up ,the phone should start in download mode.

I've succesfuly did it, my phone is working again, thanks a lot.

[q] death o3d

Hey guys i really need your help
and sorry for my bad english!
i tried to flash the rom on post #32
http://forum.xda-developers.com/showthread.php?t=1424137&page=4
now my O3D is totaly death.
Cant get into recovery
doesnt boot
nothing reacts
when i plug in on my Windows 7 pc nothing happens
LG mobile tool says fatal error.
Anyone a solution or can i just hit it on the wall??
Thanks

Try lg fkash recovery tool.

1.Keep the phone turned off.
2. Press Vol-up button.
3. While keeping Vol-up button pressed, connect the phone to the PC, when you hear a voice release your finger.
4. After driver installation, open LG Update Tool, then click on Recovery Phone.
I hope it work for you.

abo_mara7 said:
1.Keep the phone turned off.
2. Press Vol-up button.
3. While keeping Vol-up button pressed, connect the phone to the PC, when you hear a voice release your finger.
4. After driver installation, open LG Update Tool, then click on Recovery Phone.
I hope it work for you.
Click to expand...
Click to collapse
Thanks but no didn't work for me

did u find a solution yet... just wanted to know..

Meemo23 said:
did u find a solution yet... just wanted to know..
Click to expand...
Click to collapse
no
sent it back -> waiting for new device

[Xperia M2][D2305] How to recover from bootloop after unlock bootloader

[Xperia M2][D2305][4.3] 18.0.A.1.30
XPERIA M2 Recovery from Brick and more...etc
u can only use this 2 item
Flash tool
http://www.flashtool.net/index.php
[Drivers] FlashTool Xperia Driver Pack (v1.5) [20140318]
http://forum.xda-developers.com/showthread.php?t=2635830
D2305_18.0.A.1.30_Global Generic by Sai Arkar
https://mega.co.nz/#!tc4G0Ahb!5MQuH17IY5OwBE50Mlb5SzHBE1G04UOyGz6q9YipoYI
1.Download and install Flashtool on your PC.
2.Download the firmware you need (from the list below) and move it into the directory C:/Flashtool/firmwares
3.Open Flashtool, click on the lightning symbol ("flash device"), select "Flashmode" and click on "OK"
4.Just select the name of what you downloaded and click on "Flash"
5.Wait for a window to pop up (it may take a few minutes, be patient)
6.Now everything is ready: turn off your phone
7.Push the volume-down button, keep pushing and connect to your PC
8.Once the flashing process has started, release the volume rocker as soon as possible
9.NEVER disconnect the USB cable until it's finished!!!
10.Turn on and enjoy!
IMPORTANT:
if you are using Windows 8 you will need to enable few things to allow driver installation
If you are a Windows 8.1 user, you must see this video
https://www.youtube.com/watch?v=NM1MN8QZhnk
Please contact us if there is anything we can do.
Twitter
https://twitter.com/kum4423

Phone will not switch on ...
Tried unlocking the boootloader following instructions from the Sony website,
after "sucessfully" unlocking the bootloader in flashboot mode the phone got stuck in a boot loop.
Eventually stopped the phone boot looping by pressing all the buttons at the same time, have now found out it is the two volume buttons and the power button, then the phone did not switch on at all, tried connecting and holding volume button etc, to USB but all that comes up in device manager is "unknown device" and the flash tool does not recognise it in any mode, found out that holding the power button down for five minutes reboots the phone. Then flashed with above firmware and ended up in another bootloop, holding the up volume and power button makes the phone vibrate once then three times, let go after one and then you can get into flashmode, this time I flashed the latest firmware from http://forum.xda-developers.com/showthread.php?t=2762296 and it worked.

fonephreak said:
Tried unlocking the boootloader following instructions from the Sony website,
after "sucessfully" unlocking the bootloader in flashboot mode the phone got stuck in a boot loop.
Eventually stopped the phone boot looping by pressing all the buttons at the same time, have now found out it is the two volume buttons and the power button, then the phone did not switch on at all, tried connecting and holding volume button etc, to USB but all that comes up in device manager is "unknown device" and the flash tool does not recognise it in any mode, found out that holding the power button down for five minutes reboots the phone. Then flashed with above firmware and ended up in another bootloop, holding the up volume and power button makes the phone vibrate once then three times, let go after one and then you can get into flashmode, this time I flashed the latest firmware from http://forum.xda-developers.com/showthread.php?t=2762296 and it worked.
Click to expand...
Click to collapse
tried connecting and holding volume button etc, to USB but all that comes up in device manager is "unknown device" and the flash tool does not recognise it in any mode, found out that holding the power button down for five minutes reboots the phone.
Click to expand...
Click to collapse
Did you read this? and tried it?
IMPORTANT:
if you are using Windows 8 you will need to enable few things to allow driver installation
If you are a Windows 8.1 user, you must see this video
https://www.youtube.com/watch?v=NM1MN8QZhnk
Then flashed with above firmware and ended up in another bootloop, holding the up volume and power button makes the phone vibrate once then three times, let go after one and then you can get into flashmode, this time I flashed the latest firmware from
Click to expand...
Click to collapse
u can only use this listed item
Flash tool
[Drivers] FlashTool Xperia Driver Pack (v1.5) [20140318]
D2305_18.0.A.1.30_Global Generic by Sai Arkar←This FTF file is most important

Help please?
Hi man, I need your help urgently... I tried flashing kernel image to my Xperia M2 D2303, but I got impatient as recovery mode wasn't coming on and I did in in fastboot mode instead. Now it's stuck on boot loop and the screen only flashes. I can't get it to connect to my computer either, my computer just doesn't recognize it anymore. So, I can't flash anything on to it to recover it now either, and I tried putting files into my SD card to restore from but those files won't show when I try to download from zip using Clockwork Mod. What should I do?
Update
I tried to flash a custom rom into it, but even though I remember turning USB debugging on, it seems it's off. And plus, the drivers link you gave don't include the Xperia m2 drivers.

It would not connect to Flash modehttp://dl-1.va.us.xda-developers.com/2/9/8/5/4/7/8/NewPicture002.jpg?key=xzdzp41r6BQtbbijWRPtQA&ts=1414307092

Could You please update link for :
"D2305_18.0.A.1.30_Global Generic by Sai Arkar"
can't download file, please help
Thank You

HELP! ROM Manager bricked my O3D - Is it fixable?

NOTE: Before we start, I have now googled it and in hindsight I probably should of left RM alone!
Anyway as the title states my O3D seems totally goosed! I selected the recovery flash in ROM Manager for P920, it rebooted and all it does now is show the logo for a second, vibrate then off. I tried the usual tutorial stuff...
Power button, Vol up battery in - it comes up 'USB Device Unrecognised' and then It also keeps popping up 'Unknown Device' however when I click on properties every entry is 'Unavailable'
Power button, Vol Down, battery in does nothing (tried it a million times)
If I do...
Power button, Vol up then apply the battery - Device Manager finds... 'LG Mobile USB Modem', 'MAP SMS' (Other Devices) and 'LGE Mobile Composite USB Device'
No sign of OMAP44xx so the flash tools don't see it... strangely LG Mobile Support Tool sees the phone and tries to update it however it says it has the latest firmware, when I use the update recover option it gets to 15% but then complains that it can't communicate with the phone.
Is it dead? :crying:
Any help would be much appreciated.

dont worry. its not dead. has happened to my phone a trillion times ..
all you need to is try as below:
1. without connecting phone to usb first hold down 3d button then volume down and keep pressing power untill it starts up and then off again , then release all 3 together as it is off and repeat (remember first 3d then volume down and then power). this time just let the power button go on lg logo but keep pressing the other 2.
2. if this doesnt work, then easiest method - download omap4boot for optimus v1.21 or all in one p920 v1.3 by XDA, remove battery, only press down the volume up button and while pressing connect usb. make sure you hear 1 ding of connect , 1 dong of disconnect then 2 dings of connect. after this the ding dong should end .. if you have all drivers installed , then it will install omap drivers. a window will pop up and everything will have a green check. once it does that you can install a custom recovery twrp or cwm using fastboot . boot into recovery and flash a rom.
still if doesnt work, have patience, post a reply and will tell other steps to proceed with .....

Thanks for your time RVBSD, unfortunately (although I will keep trying!)
In No. 1 - I get the first logo, but when I re-apply the 3D/V and power, I don't get the second logo.
In No.2 - I get the first ding/dong then just 1 ding, no sign of Mr OMAP! - I'll keep trying though.

Once u get the second ding and then this music stops, Open device manager. Look for lg usb modem and disable it. Then look for omap44 something. The device manager may be refreshing quickly. Somehow i had a chance to right click on omap device and chose update driver. Select manual and choose omap.inf from the folder that u have to download as per my previous reply. Restart computer and check again.
Alternatively you can install all inf manually, right click and install, before connecting the device.
Let me know
Sent from my LG-P920 using xda app-developers app

Again, thanks again for your input but I am still no further. I manually clicked the inf and it said it installed fine... but nothing changed in Device Manager. I then attempted to 'force' the driver on the unknown device, however after it installed it returned a 'Code 10' error... unable to start.
Even tried the service software 'LGNPST' but it couldn't even connect to the port! ho-hum...

i tried it again. even on my computer it didnt take the omap drivers this time.... strange .....
but i could install fastboot, then installed cwm recovery . then flashed a rooted rom and its working ...
1. Turn off your Phone, pull out battery.
2. download omap4boot-for_optimus-v1.21 (run "start_fastboot.bat" (it will wait until phone connected)
3. connect phone with USB cable without battery, the usbboot will start
4. insert battery while the usbboot is waiting, it gives 5 secs only
5. unplug USB cable the LG logo will appear with fastboot on top
6. download the attached files to your desktop and extract
7. open cmd and in cmd navigate to fastboot.exe location, where ever downloaded
8. run fastboot.exe from cmd and choose the cwm file to be pushed to your phone
command : fastboot -s flash recovery recovery-clockwork-6.0.1.9-p920.img
9. reboot device into recovery , try to wipe cache and factory reset and try to reboot
if this works it will take you to existing installed rom, then you can reboot to recovery and flash Su_Bbox_1.20.2_gazhead_signed.zip to root it
10. else copy a custom rom to sd card , insert in the mobile , reboot into recovery and flash the cutom rom

PLease help
CAn you tell me how can mount recovery partition