PB, LG optimus 3D only boot in CWM - LG Optimus 3D

Hello everbody, I have a problem with my phone an I hope you will be able to help me. I want to appologies myself for my english, I'm French
My phone only boot in the CWM menu (where i can choose if y want reset the factory profil,...) I hope you understand me.
I would like to unistal CWM but i don't know how.
I try installing o stock recovery from my SD card but it didn't work.
I really hope you will be able to help me if you need any other information juste ask

hello everyone, I am experiencing the same problem. After the OTA update when the phone restarted, it ended in the CWM menu and it is impossible to restart the system it always ends in the recovery mode, wanting an update.zip file that doesn't exist. Can anyone help please

Try to update with this method
http://forum.xda-developers.com/showpost.php?p=18082599&postcount=1
Plug phone in dowload mode (power off phone then vol up + power,if you see lg logo release buttons)

adixtra said:
Try to update with this method
http://forum.xda-developers.com/showpost.php?p=18082599&postcount=1
Plug phone in dowload mode (power off phone then vol up + power,if you see lg logo release buttons)
Click to expand...
Click to collapse
As i said before, the phone stays in the cwm recovery menu and doesn't do anything else. If i turn off the phone and then restart it while pressing the power button and the + button volume, it is detected by the pc and installs the drivers, but nothing else.
If i try to use your method, it doesn't communicate with the pc, phone disconnected, unavailable.
Isn't there any other way..

Ok I've managed to flash the phone. just needed windows xp to work correctly with the drivers.
thanks

adixtra said:
Try to update with this method
http://forum.xda-developers.com/showpost.php?p=18082599&postcount=1
Plug phone in dowload mode (power off phone then vol up + power,if you see lg logo release buttons)
Click to expand...
Click to collapse
Thanks to take time to help me. I've try following the step on your link but on the last step, when the official LG flasher is running, I have an message saying that my phone isn't connect with my computer.

Try to reinstall drives.Remove battery, plug phone to computer, press vol+ button and insert battery.

Is the phone suppose to turn on when i put the battery in?

If you put battery and you keep VOL up ,the phone should start in download mode.

I've succesfuly did it, my phone is working again, thanks a lot.

Related

[Q] Help for my Huawei Ideos U8150

Hi all,
I was trying to install a new Rom Dronix 0.4. Upon entering the bootloader I accidentaly somehow no idea how,deleted clockwork mod recovery that was on there and now just can't get into bootloader mode or even get my phone to start up past the 1st screen.I've tried volume up +green button and power button to try to get in,volume down + end call red button and power button no go.The only thing it goes into is if I hold the volume down button + call green button and power which takes me to the firmware update but just flashes and says unpack failed.The other thing is that if press the red and green buttons for calls and the power button it brings the screen to a purplish colour but does nothing as well.I've tried to get the computer to recognize the phone but it won't even after installing the usb drivers with windows xp and windows 7.Atm there is no ROM on the phone after deleting it,cache and dalvik cache. It's just empty with not even a bootloader to try and boot into, only hardware is available now.
I'm at a loss as to what and any help if trying to get it back and running would be appreciated.
Thanks,
Paul
Flash UltraJack recovery from the PC.
http://forum.xda-developers.com/showthread.php?t=908178
hello, i think you kinda deleted the boot!!
try following instructions on this
http://forum.xda-developers.com/showthread.php?t=1011527
ITS SAYS UPDATE FAILS CUASE YOU DONT HAVE THE FIRMWARE on YOUR SD CARD>>>DO YOU???? JUST GO TO THEAD AND FOLLOW INSTRUCTIONS AND LET ME KNW!
YOU SIR ARE A CHAMPION!!!!!!!! If ever you are in Sydney, Australia I'll be treating you a few beers if you do drink heh.
Again THANK YOU!!!!

Problem after installing 4 button/overclock

I have a big problem with my Lg optimus 3d with Darkroom ICS.
After that i tried to install overclock with 4 keys fix from this thread http://forum.xda-developers.com/showthread.php?t=1982744
my phone wont boot up. Here is a link to show you the problem: http://www.youtube.com/watch?v=BfdHevSyR0c&feature=youtu.be
the last thing I do in the video is holding power+vol up+3D and then I get a error screen in Korean.
When i try to connect it to my computer it just wont stay connected. (The connect and disconnect sound beeps with around 3s between)
Do anyone have a suggestion on how to fix this?
Sincerely, Henrik
Try this:
-keep battery in
-hold vol+
-connect usb (hold vol+ 'till you enter download mode)
-flash ICS via LG FlashTool
oh and make sure you've installed the whole drivers.. (for omap4430 etc)
HenrikSwe said:
I have a big problem with my Lg optimus 3d with Darkroom ICS.
After that i tried to install overclock with 4 keys fix from this thread http://forum.xda-developers.com/showthread.php?t=1982744
my phone wont boot up. Here is a link to show you the problem: http://www.youtube.com/watch?v=BfdHevSyR0c&feature=youtu.be
the last thing I do in the video is holding power+vol up+3D and then I get a error screen in Korean.
When i try to connect it to my computer it just wont stay connected. (The connect and disconnect sound beeps with around 3s between)
Do anyone have a suggestion on how to fix this?
Sincerely, Henrik
Click to expand...
Click to collapse
well idont know
trie to conect the usb cable and trie to enter download mode
and re flash xball ics port
TMProduct1onZ said:
Try this:
-keep battery in
-hold vol+
-connect usb (hold vol+ 'till you enter download mode)
-flash ICS via LG FlashTool
oh and make sure you've installed the whole drivers.. (for omap4430 etc)
Click to expand...
Click to collapse
Thanks! :good:
I have successfully been able to enter download mode. I have also installed omap drivers and LG drvers. But
LG flashtool dosent start the flashing process. Any sugestions on how to solve this?
I have been looking around on other guides and the all say you need to connect your phone without the battery, but I cant do that as my phone wont stay connected.
Sincerley, Henrik
I just did mine. Leave the battery in. Connect your phone and it will power up for 3 secs then power off repeatedly. While this is happening, hold Vol + and Power and you'll enter download mode with the korean screen. Flash ICS404 again with LG Flash tool or smart flash (I used smartflash cos it was simpler and quicker)
LeighR said:
I just did mine. Leave the battery in. Connect your phone and it will power up for 3 secs then power off repeatedly. While this is happening, hold Vol + and Power and you'll enter download mode with the korean screen. Flash ICS404 again with LG Flash tool or smart flash (I used smartflash cos it was simpler and quicker)
Click to expand...
Click to collapse
Thanks man!!
Solved my problem. also changed the com port from 6 to 41 seemed to have helped.
Great to have this community of experts that can help you. :good::good:
Sincerely, Henrik
That files works only with wkpark method, i wrote it in the first post
Please read all before flash
Anyway was not necessary to reflash all the rom, you can just fix through wkpark fastboot

Please tell me i didnt kill my phone!!!

Ok so my fiancé pointed out that her phone got an update and I liked how it looked so I wanted to update mine. but I couldn't because of root. and so since I never use my root I went into super su and hit the unroot button and then my phone reset I have been in bootloop ever since. before someone suggests NO I cannot use ODIN because it wont register my phone being plugged in. YES I have the proper driver installed I triple checked and no my computer does not register the phone either. is there anything that I can do?
You didnt kill your phone!!!
The reason of bootloop is that when you press unroot in superSU it also restores unpatched stock boot.img which doesn't boot with custom recovery.
Hold power + home + volume up + volume down for 7 seconds to hard reboot your phone and enter download mode confirmation page. Press volume down to exit downloading mode and immediately hold volume up + power + home until you enter recovery. Do a factory reset.
Enter download mode confirmation page again by same method and press volume up, connect phone to your PC. Now if Odin doesn't recognize your phone then that 100% Driver or USB Cable problem. Flash latest official firmware and you should be good to go.
Aria.A97 said:
You didnt kill your phone!!!
The reason of bootloop is that when you press unroot in superSU it also restores unpatched stock boot.img which doesn't boot with custom recovery.
Hold power + home + volume up + volume down for 7 seconds to hard reboot your phone and enter download mode confirmation page. Press volume down to exit downloading mode and immediately hold volume up + power + home until you enter recovery. Do a factory reset.
Enter download mode confirmation page again by same method and press volume up, connect phone to your PC. Now if Odin doesn't recognize your phone then that 100% Driver or USB Cable problem. Flash latest official firmware and you should be good to go.
Click to expand...
Click to collapse
Nice tut! Anyway, if he still can't get recognized by PC, i suggest to try different PC, i had the same problem a while ago, my pc wouldn't recognize my phone in odin no matter what. Then i checked on my friends PC and it worked like a charm. It must be USB ports problems.
if your pc does see your phone but the odin still fails you can just use smartswitch and do emergency recovery tyoe your model number and imei in and sit back and relax and you are done
Thank YOU!!!!!!
Aria.A97 said:
You didnt kill your phone!!!
The reason of bootloop is that when you press unroot in superSU it also restores unpatched stock boot.img which doesn't boot with custom recovery.
Hold power + home + volume up + volume down for 7 seconds to hard reboot your phone and enter download mode confirmation page. Press volume down to exit downloading mode and immediately hold volume up + power + home until you enter recovery. Do a factory reset.
Enter download mode confirmation page again by same method and press volume up, connect phone to your PC. Now if Odin doesn't recognize your phone then that 100% Driver or USB Cable problem. Flash latest official firmware and you should be good to go.
Click to expand...
Click to collapse
You are a genius It was my cable that I was using... I was sitting here reading your post and I'm thinking to my self "yeah like I haven't tried that already thanks for nothing." then I saw the part about my cable and said its worth a shot. thank you so much I was so scared and frustrated about possible being without a phone... Thank you again
Xeodia said:
You are a genius It was my cable that I was using... I was sitting here reading your post and I'm thinking to my self "yeah like I haven't tried that already thanks for nothing." then I saw the part about my cable and said its worth a shot. thank you so much I was so scared and frustrated about possible being without a phone... Thank you again
Click to expand...
Click to collapse
Hey guys since my s6 SM-G920F is with tripped knox status 0x1 i can't use smartswitch for emergency recovery it stucks on 94% always with hours,what is the main reason of that i tried on other pc it is the same,my cable is ok because it charges s6 without any singl problem!sorry for interuppt in this thread like idiot but what is about smartswitch stucks always on 94%?!!!
anyone help me:crying:
vlatkonexus4 said:
Hey guys since my s6 SM-G920F is with tripped knox status 0x1 i can't use smartswitch for emergency recovery it stucks on 94% always with hours,what is the main reason of that i tried on other pc it is the same,my cable is ok because it charges s6 without any singl problem!sorry for interuppt in this thread like idiot but what is about smartswitch stucks always on 94%?!!!
anyone help me:crying:
Click to expand...
Click to collapse
just use odin to flash firmware.
vlatkonexus4 said:
Hey guys since my s6 SM-G920F is with tripped knox status 0x1 i can't use smartswitch for emergency recovery it stucks on 94% always with hours,what is the main reason of that i tried on other pc it is the same,my cable is ok because it charges s6 without any singl problem!sorry for interuppt in this thread like idiot but what is about smartswitch stucks always on 94%?!!!
anyone help me:crying:
Click to expand...
Click to collapse
Nonsense.... I used it when I trashed my EFS / Modem
Smart Switch does work, check your USB drivers and internet connection.
At the end of the process smart switch does verify a lot of thing, when your CPU from your computer is slow it will hang a long time on 94%
i can try via teamviewer to help you

A7 could not do normal boot, invalid kernel length

Hi everyone, I am having an issue with my a7 phone, when i power on it says
could not do normal boot, invalid kernel length
Click to expand...
Click to collapse
, then i connected the phone to my computer it constantly restarts and says the same thing
could not do normal boot
Click to expand...
Click to collapse
, can't enter into recovery mode, c'ant enter in download mode, even my pc and odin doesn't recognize the device at all, please help I can't afford a new one.
Thanks in advance.
Just flash stock rom with odin, conect to pc pressing vol + and vol - to get download mode
It doesn't react with + - buttons, that is why i can't flash it
What is the last OS you are running?
If the phone keeps restarting, first connect the phone to your PC via USB cable.
Then
1. Keep Vol+ and POWER pressed.
or
2. Keep Vol- and POWER Pressed.
Thank you but it seems that my motherboard is damaged
Thank you but it seems that my motherboard is damaged
I do not think it has been damaged, try pressing vol + vol- boot at the same time a couple of times and then the third release the vol + i the boot and it will restart in dowload mode. then flash with odin each of the partitions of an original rom.
good luck
juliàcarax said:
I do not think it has been damaged, try pressing vol + vol- boot at the same time a couple of times and then the third release the vol + i the boot and it will restart in dowload mode. then flash with odin each of the partitions of an original rom.
good luck
Click to expand...
Click to collapse
vol - and connect the cable, should bot in download mode
Condolences in your A7 brother
Let me explain to you...our phone have "bootclasspath" in its kernel...if this messed up you cannot do recovery or download mode. In short our phone samsung galaxy a7 2018 is hard breaked and good as dead, im sorry brother we shouldnt have messed with our phone...i understands your feelings:crying:
How do I do that?I have a problem with my phone too
dear my galaxy A750F same problem
showing could not do normal boot inval id kenrel length
i pressing vol down and up and plug in cable after press vol up and there showing massage . press vol down and power button but i many time try it's not working .
than i download obin and ap file and try to downloading but its not working and still not solve my problem .
i need your quick response and kind help
I had the same error appear on my S10 (beyond1lte) and was able to get back in to download mode by [Vol down] + Bixby + Power
h4ck3rc1 said:
I had the same error appear on my S10 (beyond1lte) and was able to get back in to download mode by [Vol down] + Bixby + Power
Click to expand...
Click to collapse
yes , plug into pc... odin flash latest twrp md5 for your device that will get you to recovery and start again
sakho1991 said:
Thank you but it seems that my motherboard is damaged
Thank you but it seems that my motherboard is damaged
Click to expand...
Click to collapse
Hello. Did you find a way to boot into your phone or atleast recover the data in the phone?
I am facing the same issue with my A8+ and i really need the data in it.
Please do let me know if you can somehow help.
PiXi_0301 said:
Hello. Did you find a way to boot into your phone or atleast recover the data in the phone?
I am facing the same issue with my A8+ and i really need the data in it.
Please do let me know if you can somehow help.
Click to expand...
Click to collapse
+1
read pit file by any tool , if the tool can read file then reflash phone if the tool can not read pit file the phone has been damaged

Stuck at entering fastboot mode

How can I get my Galaxy Note 20 Ultra out of stuck at 'entering fastboot mode'?
Hold down power and volume down until it reboots back to recovery. I got stuck there last week and that's what worked for me.
Sent from my SM-N986U1 using Tapatalk
Is this problem solved? I cannot boot into bootloader mode, thanks!
Switch off the device. Then hold volume up and down buttons and insert the USB cable plugged to PC. You will get to download/odin mode
shantanil said:
Switch off the device. Then hold volume up and down buttons and insert the USB cable plugged to PC. You will get to download/odin mode
Click to expand...
Click to collapse
Download mode is different from fatboot mode, I can enter, and works ok download mode. However, fastboot does not, it gets stuck in entering fastboot mode and no fastboot command works
I got same issue here, I've tried rooting via TWRP and after data wipe and "reboot to recovery" it got stuck in same thing and doesn't move at all, if I hold power and vol down it just boots the device which i dont want since i need to flash magisk as a last step. if anyone encountered this or knows how to fix it i'd be helpful
I'm not rooted but I've had past Samsung devices that I was able to root and if I'm not mistaken Samsung phones aren't able to boot into fastboot mode because Samsung removed the ability to. You can run commands via ADB mode but I think that's about it
adj998 said:
I'm not rooted but I've had past Samsung devices that I was able to root and if I'm not mistaken Samsung phones aren't able to boot into fastboot mode because Samsung removed the ability to. You can run commands via ADB mode but I think that's about it
Click to expand...
Click to collapse
Yea I fixed it somehow I don't even know myself
i cant eneter into download mode by using volume up and volume down ... the only thing that happens is the battery display kicks in .. is there a trick on how long to hold the volume bottons .. or any special way of doing it .. or for the usb c while trying to connect it to the computer
it gets stuck into fastboot entering if i try to do it the old fashion way .. please help
Guys, turn off the phone, press volume up and volume down together, and plug the usb cable while pressing volume up and down, and wait until the phone enter in downloading mode. This work for me.
leonardo_evaldy said:
Guys, turn off the phone, press volume up and volume down together, and plug the usb cable while pressing volume up and down, and wait until the phone enter in downloading mode. This work for me.
Click to expand...
Click to collapse
Thanks Man. This worked.
Since we can"t enter into fastboot mode is it possible to flash boot.img with adb commands?
I m having the same problem with a21s(a217f). I can t enter download mode using key combinations and the other way launching it from recovery doesn t work, it stays stuck at,, entering fastboot mode,,
The ROM is already bricked, it says in recovery when i try to factory reset the following error:,, can t mount. /system (structure needs cleaning)
Even with,, apply up. with adb,, doesn t work, it just doesn t get detected on my computer when i checked with adb tools.
! The only thing that works is that I can access my sd card and apply a update from sd card but I don t know where to get the update file. (I ll edit if it works to flash stock rom from,, apply update from sd card,, )
Anybody got some ideas or should i burn my motherboard and replace it?
sorry for bad english
Honestly plug device into PC.
Power off device
hold all 3 side buttons. Volume up and down and power/bixby.
Should usually work.
After in fast boot you must press a button Volume button to find via odin.
ivoe said:
Honestly plug device into PC.
Power off device
hold all 3 side buttons. Volume up and down and power/bixby.
Should usually work.
After in fast boot you must press a button Volume button to find via odin.
Click to expand...
Click to collapse
I already did that, unplugged the battery, reconnected it after 1min, connected my phone to the computer and pressed all 3 side buttons, still doesn t work. I guess the download mode is deleted or something..
Volume up & down, no side key, then connect to PC. Works for me. Connect to PC first does not work for me.
guru96 said:
I already did that, unplugged the battery, reconnected it after 1min, connected my phone to the computer and pressed all 3 side buttons, still doesn t work. I guess the download mode is deleted or something..
Click to expand...
Click to collapse
It wouldn't be deleted as it's a safety protocol if the device has a bad update and freaks out.
Maybe try to person above method.
Normally I can enter download mode with any of these methods if you cannot I'd suggest trying to get the device replaced due to software malfunction
altojd said:
Since we can"t enter into fastboot mode is it possible to flash boot.img with adb commands?
Click to expand...
Click to collapse
Samsung phones use a tool called Odin to flash firmware. If you're flashing custom firmware firmware you'll need to have your bootloader unlocked.
I got mine into download mode just now. It's a Galaxy A13 .. Like stated above, try to hold all three buttons down and connect to USB. I had to let go before it showed the battery charge icon. From off. If not from off try from charging. I think that's what I did just now. Plug the usb -> let it show the charging icon (from powered off!) -> hold all three buttons, let it power on, let go. DONE.
just follow this video it helped me a lot to unlock my boot loader

Categories

Resources