Please tell me i didnt kill my phone!!! - Galaxy S6 Q&A, Help & Troubleshooting

Ok so my fiancé pointed out that her phone got an update and I liked how it looked so I wanted to update mine. but I couldn't because of root. and so since I never use my root I went into super su and hit the unroot button and then my phone reset I have been in bootloop ever since. before someone suggests NO I cannot use ODIN because it wont register my phone being plugged in. YES I have the proper driver installed I triple checked and no my computer does not register the phone either. is there anything that I can do?

You didnt kill your phone!!!
The reason of bootloop is that when you press unroot in superSU it also restores unpatched stock boot.img which doesn't boot with custom recovery.
Hold power + home + volume up + volume down for 7 seconds to hard reboot your phone and enter download mode confirmation page. Press volume down to exit downloading mode and immediately hold volume up + power + home until you enter recovery. Do a factory reset.
Enter download mode confirmation page again by same method and press volume up, connect phone to your PC. Now if Odin doesn't recognize your phone then that 100% Driver or USB Cable problem. Flash latest official firmware and you should be good to go.

Aria.A97 said:
You didnt kill your phone!!!
The reason of bootloop is that when you press unroot in superSU it also restores unpatched stock boot.img which doesn't boot with custom recovery.
Hold power + home + volume up + volume down for 7 seconds to hard reboot your phone and enter download mode confirmation page. Press volume down to exit downloading mode and immediately hold volume up + power + home until you enter recovery. Do a factory reset.
Enter download mode confirmation page again by same method and press volume up, connect phone to your PC. Now if Odin doesn't recognize your phone then that 100% Driver or USB Cable problem. Flash latest official firmware and you should be good to go.
Click to expand...
Click to collapse
Nice tut! Anyway, if he still can't get recognized by PC, i suggest to try different PC, i had the same problem a while ago, my pc wouldn't recognize my phone in odin no matter what. Then i checked on my friends PC and it worked like a charm. It must be USB ports problems.

if your pc does see your phone but the odin still fails you can just use smartswitch and do emergency recovery tyoe your model number and imei in and sit back and relax and you are done

Thank YOU!!!!!!
Aria.A97 said:
You didnt kill your phone!!!
The reason of bootloop is that when you press unroot in superSU it also restores unpatched stock boot.img which doesn't boot with custom recovery.
Hold power + home + volume up + volume down for 7 seconds to hard reboot your phone and enter download mode confirmation page. Press volume down to exit downloading mode and immediately hold volume up + power + home until you enter recovery. Do a factory reset.
Enter download mode confirmation page again by same method and press volume up, connect phone to your PC. Now if Odin doesn't recognize your phone then that 100% Driver or USB Cable problem. Flash latest official firmware and you should be good to go.
Click to expand...
Click to collapse
You are a genius It was my cable that I was using... I was sitting here reading your post and I'm thinking to my self "yeah like I haven't tried that already thanks for nothing." then I saw the part about my cable and said its worth a shot. thank you so much I was so scared and frustrated about possible being without a phone... Thank you again

Xeodia said:
You are a genius It was my cable that I was using... I was sitting here reading your post and I'm thinking to my self "yeah like I haven't tried that already thanks for nothing." then I saw the part about my cable and said its worth a shot. thank you so much I was so scared and frustrated about possible being without a phone... Thank you again
Click to expand...
Click to collapse
Hey guys since my s6 SM-G920F is with tripped knox status 0x1 i can't use smartswitch for emergency recovery it stucks on 94% always with hours,what is the main reason of that i tried on other pc it is the same,my cable is ok because it charges s6 without any singl problem!sorry for interuppt in this thread like idiot but what is about smartswitch stucks always on 94%?!!!
anyone help me:crying:

vlatkonexus4 said:
Hey guys since my s6 SM-G920F is with tripped knox status 0x1 i can't use smartswitch for emergency recovery it stucks on 94% always with hours,what is the main reason of that i tried on other pc it is the same,my cable is ok because it charges s6 without any singl problem!sorry for interuppt in this thread like idiot but what is about smartswitch stucks always on 94%?!!!
anyone help me:crying:
Click to expand...
Click to collapse
just use odin to flash firmware.

vlatkonexus4 said:
Hey guys since my s6 SM-G920F is with tripped knox status 0x1 i can't use smartswitch for emergency recovery it stucks on 94% always with hours,what is the main reason of that i tried on other pc it is the same,my cable is ok because it charges s6 without any singl problem!sorry for interuppt in this thread like idiot but what is about smartswitch stucks always on 94%?!!!
anyone help me:crying:
Click to expand...
Click to collapse
Nonsense.... I used it when I trashed my EFS / Modem
Smart Switch does work, check your USB drivers and internet connection.
At the end of the process smart switch does verify a lot of thing, when your CPU from your computer is slow it will hang a long time on 94%

i can try via teamviewer to help you

Related

How to unbrick the soft bricked Captivate

NOTE:
So far this has been the only sure fire method I've found to 100% get around any brick situation regardless of firmware, etc. This only works for the captivate, not any other galaxy s variant.
Situations: phone-!-Computer / no download mode
Black Screen / RST_STATUS 0x0
Procedure:
1. Remove the battery, external SD card and SIM card.
2. Wait 10 seconds.
3. Open odin3
4. Connect usb cable.
5. Hold volume up + volume down + Power.
6. Insert battery.
7. Release POWER BUTTON ONLY.
You should now be in immediate download mode.
Please forgive me if this is duplicate some where, but I tried every procedure I could find on google to no avail, then accidentally found this method just before I was going to box it back up and see if my buddy at AT&T would make me eat it or not.
My situation was: Launched Odin3 to flash H3 firmware, died twice in the middle, and on the third time locked up half ways just at the beginning of factoryfs.rfs -- Then the phone did nothing. Blackscreen is all. Interestingly enough, while in the state if you hold volume up + power, it will give a hw diagnostic screen. Beyond that I could get no where. Just a black screen, no acknowledgement when connected to PC, no charging indicator, nothing.
If this is a dupe Im sorry but this method I could not find and hope to make it readily available to people who may think their phones bricked.
Update 12/22/2010:
How to BRICK the phone / WARNING!!!
If for whatever reason you decide to use Odin to flash a stock GTI9000 ROM and manually add the kernels and modems using a "pure" 2.2.1 sammy rom. BEWARE.
Researching a lot, it seems the consensus is that the sbl in the 2.2.1 versions of the GTI9000 has *hard* download mode crippled.. Meaning if there is a software screw up YOU CANNOT USE A USB JIG OR ANY OTHER METHOD OF GETTING THE PHONE IN DOWNLOAD MODE!!! To fix it you'll need a new one or JTAG to replace the bootloader.
As far as I can tell, beyond getting completely rid of the AT&T logo, there is no need to flash boot/sbl to get the "purity" of the 2.2.1 sammy roms.
Extract all files from the tar EXCEPT boot/sbl and re-tar and flash just those to avoid overwriting the stock captivate boot loader.
Also, it does not appear the boot/sbl from the captivate 2.2 leak suffers this same problem.
For any one iffy on bricking their phones, stay away from roms that remove COMPLETELY the AT&T logo on boot. This generally means the boot loader has been messed with any you may be screwed if you soft brick the phone. Most CWM roms dont overwrite the boot/sbl, but some can and do. Watch yourself.. if it the AT&T logo goes away COMPLETELY, I recommend flashing JF6 with One click while the roms alive using adb reboot download and try another rom.
thanks!
worked...took a few tries but some trick with this captivate to get it into download mode.. i was totally bricked too, diag screen with PC/Phone icons and exclamation mark. for me 1.) plug usb, 2.) hold power and vol up/down and connect battery (it fell out) and i was in download mode
I guess a similar procedure was on the odin3 one click thread, but there is something different in your procedure, it's not my case but it would be nice if some people confirms this as this may be useful and if it really works it should be included in odin thread
What worked for me was: Pull the battery, sim and micro sd card. Open odin on the PC. Insert the battery. Hold vol up and down then with the buttons held connect the usb cable. Just remember to plug in the usb cable with the vol up and down held in and odin must be open on the computer.
I also ran into the vol up plus power red text screen. Interesting to note that one of the fields will change depending if the usb cable is connected or not.
mine is dead
mi samsung captivate was working great but, suddenly it go black and only the touch bottom have light, when i plug it in the a/c it show is charging. i'm mac user and a read that i ned to use odin3 but it not work on mac. how i can unbrick the phone???
is rooted with one click lag
the dbdata was modif to
thats all
HEEEEELLLLLPPPPPP
Odin will not open on the mac?
Cant you use a virtual machine and use Odin on a Mac that way?
Or else take the odin 3 single click for JF6 and use on a friends Windows Computer.
Please help - unable to flash back with Odin3
I have pretty much tried it all at this point and am trying to figure out what I'm doing wrong.
I followed the directions just in case get to the big yellow triangle with the droid shoveling and the screen stays at "downloading, do not turn off target..."
Of course I had Odin3 open already but its not seeing my phone, USB drives are installed am using Odin3 ver. 1.30.
Any help would be appreciated, TIA!
TechNut* said:
I have pretty much tried it all at this point and am trying to figure out what I'm doing wrong.
I followed the directions just in case get to the big yellow triangle with the droid shoveling and the screen stays at "downloading, do not turn off target..."
Of course I had Odin3 open already but its not seeing my phone, USB drives are installed am using Odin3 ver. 1.30.
Any help would be appreciated, TIA!
Click to expand...
Click to collapse
Best way to get download mode is use adb and type adb reboot download.
Or follow the volume up/down held with odin open on the computer, then you plug in the usb cable to the computer.
askpcguy said:
What worked for me was: Pull the battery, sim and micro sd card. Open odin on the PC. Insert the battery. Hold vol up and down then with the buttons held connect the usb cable. Just remember to plug in the usb cable with the vol up and down held in and odin must be open on the computer.
I also ran into the vol up plus power red text screen. Interesting to note that one of the fields will change depending if the usb cable is connected or not.
Click to expand...
Click to collapse
Thank you thank you thank you. i had a totally dead no boot or anything and this worked, i was going through the whole returning the phone senerio in my head
mattbeau said:
Thank you thank you thank you. i had a totally dead no boot or anything and this worked, i was going through the whole returning the phone senerio in my head
Click to expand...
Click to collapse
Just sharing the info! Makes you think twice about trying something else don't it?
does not seem to work because as soon as my battery touches the contacts it goes to the diag screen. do I have to release the power button in super human speed times there?
looked at all threads here, looked elsewhere -- there are some that are not fixable. Wanted to add that in case others come here and think that they might be the only ones that can't get it to work.
Ended up sending mine off to Samsung to reset today. :/
I love you! I called AT&T to send me documentation to sign and it was going to cost me 125 dollars to get it replaced even with warranty. And you fixed it !
i have tried just about every single method detailed in these forums, and nothing works.
Trying what OP suggested just sends me to the battery charging animation screen.
Anybody have any ideas ?
file analysis
I keep can get to the download screen and I hit start and it does the same thing everytime it just does File analysis i cant figure what i am doing wrong here somebody please help me
I think the issue was it had something to do with 64 bit windows 7 i just re did the stock rom one click solution and it worked fine
thekurrgan said:
NOTE:
5. Hold volume up + volume down + Power.
6. Insert battery.
7. Release POWER BUTTON ONLY.
You should now be in immediate download mode.
Click to expand...
Click to collapse
Thank you for sharing your experience.
I don't have a Captivate yet but am doing research on it and hopeful of getting one. I am confused about one thing.
Every where that I have read about how to enter Recovery mode or Download mode on the Captivate using the 3 button method, it says holding down both Volume UP + Volume Down (plus Power button) will enter Recovery mode. But you say it enters Download mode which is confusing to me. As I recall, to enter Download mode you must press the Vol Down only (plus Power button). Could it be because the phone won't go into Recovery mode, it goes into Download mode instead? Am I missing something?
Thank you!
Download mode is for updating the phone's firmware.
Remove battery, plug in the usb cable to the phone, open ODIN on the computer (need usb drivers installed before hand) on the phone hold volume up and down then plug the phone into the computer. Your phone will say DOWNLOADING. This method works even if you run into problems and the phone refuses to boot properly.
Recovery mode is for installing Update.zip. The method is tricky but involves holding volume up/down and power, the phone will show ATT then go black. It will repeat that but after the second time it goes black let go of power.
If that doesnt work, android debug tools ADB reboot recovery will work even better.
Or root the phone and use Clockwork Rom manager to boot into recovery, just press the menu item.
askpcguy said:
Download mode is for updating the phone's firmware.
Remove battery, plug in the usb cable to the phone, open ODIN on the computer (need usb drivers installed before hand) on the phone hold volume up and down then plug the phone into the computer. Your phone will say DOWNLOADING. This method works even if you run into problems and the phone refuses to boot properly.
Recovery mode is for installing Update.zip. The method is tricky but involves holding volume up/down and power, the phone will show ATT then go black. It will repeat that but after the second time it goes black let go of power.
If that doesn't work, android debug tools ADB reboot recovery will work even better.
Or root the phone and use Clockwork Rom manager to boot into recovery, just press the menu item.
Click to expand...
Click to collapse
Thank you askpcguy! I understand the difference between Download and Recovery modes.
So the procedural difference here is having the battery in + Power button, versus battery not in (use USB cable instead) and no Power button. Can the phone get power from the PC via the USB cable? This seems to differ from what the original poster said about download mode. Perhaps OP could edit his original post for clarification? Or am I still missing something? Thanks to all
The phone does get power from the USB cable.
The difference is one procedure uses the USB cable (download mode) and the other does not (Recovery mode).
The volume up+down method does not use the power button, the phone is powered on into download mode once you plug in the USB cable.
We say pull the battery to get the phone powered off. If a firmware flash stalled or doesn't complete, pull the battery and try again!
I now understand the precedural difference.
Thank you askpcguy!

unbrick samsung galaxy s vibrant.

i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
I have seemed to have done the something similar as I was trying to reflash with ODIN and the phone went black, I left it alone for several minutes and now when I try to turn the phone on I just have a graphic with a phone and a computer with a little triangle with an exclaimation mark in the middle and nothing else happens.
djallen1 said:
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
Click to expand...
Click to collapse
I really think i have the done impossible, there is no download mode nor recovery mode, (well, this has never worked) i don't know what to do, i'm getting my phone replaced.
I tried using adb on my computer, but the device is not found, my computer doesn't recognize my device.
cervantesjc said:
I really think i have the done impossible, there is no download mode nor recovery mode, (well, this has never worked) i don't know what to do, i'm getting my phone replaced.
I tried using adb on my computer, but the device is not found, my computer doesn't recognize my device.
Click to expand...
Click to collapse
UGH
I have the SAME problem...but I always had download AND recovery working...
after a few flashes in a short span...they just dissapeared...
screen just turns black after the "S" logo animation....
ADB can't see the device either
Same Here Too :-|
i've been searching and trying to get into dowload mode for a week and i't not working. i can hear it boot up but just stuck on the darn Vibrant screen
philthyman21 said:
i've been searching and trying to get into dowload mode for a week and i't not working. i can hear it boot up but just stuck on the darn Vibrant screen
Click to expand...
Click to collapse
I was there, use Odin to reflash to stock.
huh
djallen1 said:
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
Click to expand...
Click to collapse
i beg to differ
nothing is working for me either
So I went to This Site pathikshah. com /blog / install-android-2-2-froyo-galaxy-s/ (sorry about the spaces new user and xda wont let me post links, not spamming honest), I did exactly as it said it was working as planned until it reset after install. First instead of the vibrant screen coming up it now says:
Galaxy S
GT-I9000
Then It goes to:
Android System Recovery <3e>
on that screen it says twards the bottom:
update media please wait
E:Cant mount /dev/block/mmcblk0p1
(Invalid argument)
E:copy_dbdata_media:Cant mount SDCARD:
your storage not prepared yet, please use UI me
nu for format and reboot actions.
copy default media content failed.
so when I try to scroll through the recovery menu I have to push vol Up to scroll down
also it does nothing when i press the ok button (power button), unless I hold it down then it resets and goes back to the same recovery screen
I rooted the samsung galaxy s then added a rom and the rom is crashing my phone I've tried aboslutely everything don't know what else to do.
i also have a problem
i have install ROM manager and make a back up
went i try to recovery my backup it give me first the original recovery mode i know i have to select update.zip to access the clockworkmod recovery (ver 2.5.1.2 last one) i use the option restore and start it
now my phone just reboot in recovery mode
i'm looking if some one have a working ROM backup
tnx for your help
Drago.
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Read instructions and download files from thread here:
http://forum.xda-developers.com/showthread.php?t=734475
Watch this video:
http://www.youtube.com/watch?v=AnY7P14JSWQ
Good luck
fstathes said:
Read instructions and download files from thread here:
http://forum.xda-developers.com/showthread.php?t=734475
Watch this video:
http://www.youtube.com/watch?v=AnY7P14JSWQ
Good luck
Click to expand...
Click to collapse
Thank you for the video link. I was up to that point unable to get the download/shoveling droid screen. Now I'm in the process of finally getting the phone back to stock after downloading the t-mobile update that cam through and bricked the phone.
no downloading mode
Hi i was hoping this will help me to reenabeling my bricked samsung. But i cant get it in to downloanding mode. the 3 button way isnt working and the way showed in the movie neither. Is there an other way to get the phone back to work?
I have tried all the methods posted here as well as many others from the link posted above. But to no avail.
I did everything successfully up until the reboot. Whereupon, it would not start. No amount of button combination helped me. And taking out the battery pack is no help either. It just won't start. I could use any advice.
Thank you.
I'm in the same boat now, attempted to odin back to stock and now I have a brick. It's just blank, I cant get it into download or recovery mode using any method described.
Is my only shot the jig method I've read about now?
EDIT
Nevermind, I got it. Pulled the battery, replaced it, held down both power buttons, inserted usb (already plugged in comp w/ odin open), boom..entered download mode and flashed..
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Remove the battery and insert it again, now keep pressing the volume buttons and connect the USB cable to your phone, the usb cable must be connected to your pc first.
hey, i also experienced bricking my phone. is there a step by step process how to unbrick it? i need urgent help please. by the way im using samsung galaxy s 4g (
after i have gone to download mode. my computer cannot recognize my device. help me please.
to the post above me. Sounds like you have a bad usb data cable. Grab you a new cable online and you should be good to go
I'm assuming you have already downloaded the drivers to your computer. Sasmung.com will have them

[Q] Galaxy Fit BRICKED!!!!!!!!!!!

Guys need serious technical help..............................
i have rooted my phone with super one click all things were going fine.installed rom manager to backup my stock ROM and committed a mistake and installed wrong cwm and tried to backup my stock rom.selecting the backup option it Suppose reboot my phone in download mode which doesn't happen. and now i dose not have any access to my phone.
I searched whole forum and haven't found any solution.please help me.
Need guidance..
download and install pratyush.creed rom using odin and ur phone will be fine again
Bricked Screen (A.K.A. phone-!-pc or Black Screen of Death)
To recover from this problem, you'll need to get into the Download Mode.
Black Screen of Death:A fully bricked phone will not boot, or display the charging logo when connected to a USB charger. This presently cannot be recovered from any recovery attempt, it will require the phone to be sent back to Samsung and be serviced.
This screen does not always mean your phone is bricked. If you have a hardware locked vibrant, maybe, however, if your phone is not hardware locked, unplug the USB cable from the phone, Hold down Vol UP+Vol Down+Power, the screen will flash black, continue holding down all 3 buttons, you will see the "phone--!--PC" screen again, continue holding all 3 buttons, the screen will flash black again, release the power button only. This will put you into Download Mode.
If this does not work, open odin. Then connect your usb cable to your phone and computer. While the USB is plugged in and Odin running press and hold volume down + Home + Power. Once the black screen comes (flashes) release the Power Button. It should get into download mode.
Additionally it is possible to get into the Download Mode using a kind of micro-usb connector, modified with a 301k resistor as showed in this video:
http://www.youtube.com/watch?v=GjDkShT-65Y
Source:http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series
The solution in green will work for you
Thanks,
Spike
Press the Thanks button if this helped
raj3534 said:
download and install pratyush.creed rom using odin and ur phone will be fine again
Click to expand...
Click to collapse
Like i said my phone doesn't boot in downlode menu.odin will not find my port.
any other suggestion....................please
spike1902 said:
Bricked Screen (A.K.A. phone-!-pc or Black Screen of Death)
To recover from this problem, you'll need to get into the Download Mode.
Black Screen of Death:A fully bricked phone will not boot, or display the charging logo when connected to a USB charger. This presently cannot be recovered from any recovery attempt, it will require the phone to be sent back to Samsung and be serviced.
This screen does not always mean your phone is bricked. If you have a hardware locked vibrant, maybe, however, if your phone is not hardware locked, unplug the USB cable from the phone, Hold down Vol UP+Vol Down+Power, the screen will flash black, continue holding down all 3 buttons, you will see the "phone--!--PC" screen again, continue holding all 3 buttons, the screen will flash black again, release the power button only. This will put you into Download Mode.
If this does not work, open odin. Then connect your usb cable to your phone and computer. While the USB is plugged in and Odin running press and hold volume down + Home + Power. Once the black screen comes (flashes) release the Power Button. It should get into download mode.
Additionally it is possible to get into the Download Mode using a kind of micro-usb connector, modified with a 301k resistor as showed in this video:
http://www.youtube.com/watch?v=GjDkShT-65Y
Source:http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series
The solution in green will work for you
Thanks,
Spike
Press the Thanks button if this helped
Click to expand...
Click to collapse
i have gone though this thread.................this wont help in my case.but thanx for reply
And my S5670 is Death
I have one problem. The phone do not want to enter in download mode or recovery, and the screen is always black and don't vibrating.
I was flashing it and somewhere it block and after that it do not start.
I connected to PC and when i press:
- Home + Power don't enter in recovery mode and the PC don't see it.
- Volume Down + Home + Power don't enter in download mode and PC don't see it
- Volume Up + Home + Power the Odin and PC was saw it and installed the driver for USB, modem and serial. But when i trying to install the ROM it block at "setting connection"
I will try and with the modified resistor but when i will be home.
If you are any suggestion or another software or u want to try something i am in the mood to try all. I buy the phone for testing
If i find something else i will post.
antsmaster said:
I have one problem. The phone do not want to enter in download mode or recovery, and the screen is always black and don't vibrating.
I was flashing it and somewhere it block and after that it do not start.
I connected to PC and when i press:
- Home + Power don't enter in recovery mode and the PC don't see it.
- Volume Down + Home + Power don't enter in download mode and PC don't see it
- Volume Up + Home + Power the Odin and PC was saw it and installed the driver for USB, modem and serial. But when i trying to install the ROM it block at "setting connection"
I will try and with the modified resistor but when i will be home.
If you are any suggestion or another software or u want to try something i am in the mood to try all. I buy the phone for testing
If i find something else i will post.
Click to expand...
Click to collapse
I am facing the same problem when i press
- Volume Up + Home + Power the Odin and PC was saw it and installed the driver for USB, modem and serial. But when i trying to install the ROM it block at "setting connection"
Do i Need to goto customer care...............is it the final option....................
I talked to someone and he said to pres hold 3 buttons Vol Down + Home + power then insert battery and after that should appear the Download mode. I'm not have the phone whit me but i will try at home. if u succeed that and bring to life your phone let me know
i already tried that,it dosen't seems to work.
Just flash it again via odin with any firm or rom n ur phone will be fine....
just flash it properly....
thats it..
rajrocks said:
Just flash it again via odin with any firm or rom n ur phone will be fine....
just flash it properly....
thats it..
Click to expand...
Click to collapse
i think u have not gone through all the above posts......................i made this clear that my phone is not booting in download menu
vol down+home+power <----this combo keys are not working.
Anyways thank u for reply.............
stuck on flashing.........................
when i pressed vol up+home+power,the port was found by odin but it dose not start flashing
I try and schema whit modified resistor but nothing. i measured the level of battery it was at 2,4 V after some seconds it down to 0. Maybe it the battery? i charge all the night and next day i put on USB on PC all the day before it die. Maybe i broke the battery and no phone?
antsmaster said:
I try and schema whit modified resistor but nothing. i measured the level of battery it was at 2,4 V after some seconds it down to 0. Maybe it the battery? i charge all the night and next day i put on USB on PC all the day before it die. Maybe i broke the battery and no phone?
Click to expand...
Click to collapse
i dont think battery is problem in my case.i have checked my handset by replacing battery to.
Now i think service center is the last option.i'll visit there latest by tommorow.
If you send it to the service, please after they send back to you the phone, post what they do to the phone (change motherboard or change another piece or just flash it) Thanks.
antsmaster said:
If you send it to the service, please after they send back to you the phone, post what they do to the phone (change motherboard or change another piece or just flash it) Thanks.
Click to expand...
Click to collapse
i changed my decision and visited service center today instead of tomorrow. when i handovered handset to them they inspected the handset i front of me. they disassembled handset gone through it.finally they told me that "we will try to resolve your problem with software, and the problem is not resolved then they will change(replace) the board.
lets see what they will do.i'll inform u what they did to my handset..............................
I think u need to go to customer care. (even i bricked my phone once...) but never ever accept that uve rooted ur phone... Thats wat i did... and i got my phone repaired without any further issues!
Sent from my GT-S5670 using XDA App
hi every one.......i saw this post now...........i too faced this problem.......its a hardware problem.....i took my mobile to service center they changed the mother board.......a preadvice never ever try anything with rom manager.....its the main culprit......
used rom manager without any problem with my previous phone.......didn't face any problem......but i didn't know that CMD is currently not working with fit.........

SM-G920F - Bootloop during installing systemupdate

Hi, a friend of me has a Samsumg Galaxy S6 (SM-G920F), which runs continuously in a bootloop while installing a system update. It goes to 29% and then restarts himself to start installing the system update again and returns to exactly 29% again, followowd by a restart again, and again, and again ........ Attempts to start-up in recovery mode (Power, Volume +, Home) or download mode (Power, Volume -, Home) do not work. Also my PC does not recognize the phone. :crying::crying:
Does anyone have got an idea to got my phone working, or any other idea to get my phone in recovery- or download-mode?
Anyone?
The Phone boot ?
zworx said:
The Phone boot ?
Click to expand...
Click to collapse
No, unfortunately not. It keeps restarting when system update is at 29% and after the restart keeps comming back in "installing a system update" ......
Try the Pit files ans flash firware via odin
zworx said:
Try the Pit files ans flash firware via odin
Click to expand...
Click to collapse
For that I have to boot to download-mode, right? Problem is that the phone isn't booting to download-mode, recovery or sytem at all. At least not by the "normal" procedure. It constantly booting to "installing systemupdate" ......:crying:
When you connect To odin. The Phone is recognized?
You are not holding volume down+power+home long enough. Keep holding it until you get to the download mode prompt screen.
zworx said:
When you connect To odin. The Phone is recognized?
Click to expand...
Click to collapse
No, the phone is not recognized by ODIN. Drivers on PC are oke, because my S7 edge and my girlfriends S5 are recognized by ODIN ......
benjamen50 said:
You are not holding volume down+power+home long enough. Keep holding it until you get to the download mode prompt screen.
Click to expand...
Click to collapse
I'm holding these buttons for more then 60 seconds ....... but nothing seems to be working .....
Were the volume down, home and power button functioning fine before hand?
Looks like one of the buttons don't work.
benjamen50 said:
Were the volume down, home and power button functioning fine before hand?
Looks like one of the buttons don't work.
Click to expand...
Click to collapse
As far as I know, buttons worked fine before. I guess phone is brikked and not much I can do about it anymore ....... :crying::crying:
I'm guessing you already tried running it flat? There is still a chance download mode is bootable once you get the phone to go off due to flat battery.
This phone is a pretty bad brick, I've fixed up to DRK corrupted but this one seems unrecoverable.
benjamen50 said:
I'm guessing you already tried running it flat? There is still a chance download mode is bootable once you get the phone to go off due to flat battery.
This phone is a pretty bad brick, I've fixed up to DRK corrupted but this one seems unrecoverable.
Click to expand...
Click to collapse
Yes, I already let the phone running empty battery. But as soon as I plug in the powercord, the same process starts over and over again .......
And with adb ?
same trouble
Hi everybody, i had the same trouble on my G-920F (S6), and the only strange way i've find, is to keep button volume up AND down and power, once it's turn off for rebooting, i've add the home button pressed.
finally by that way it show me the recovery menu. Another time it show me the download menu !!??
Well but now my trouble is that i cannot succeed to flash correctly the last official samsung firmware using Odin .
i've tryed to erase nand (i know i should not), but without succeed.
so i'm looking for pit file, and i will try an older firmware.
so try with the volume up and down and power, in case of it works like for me

Stuck at entering fastboot mode

How can I get my Galaxy Note 20 Ultra out of stuck at 'entering fastboot mode'?
Hold down power and volume down until it reboots back to recovery. I got stuck there last week and that's what worked for me.
Sent from my SM-N986U1 using Tapatalk
Is this problem solved? I cannot boot into bootloader mode, thanks!
Switch off the device. Then hold volume up and down buttons and insert the USB cable plugged to PC. You will get to download/odin mode
shantanil said:
Switch off the device. Then hold volume up and down buttons and insert the USB cable plugged to PC. You will get to download/odin mode
Click to expand...
Click to collapse
Download mode is different from fatboot mode, I can enter, and works ok download mode. However, fastboot does not, it gets stuck in entering fastboot mode and no fastboot command works
I got same issue here, I've tried rooting via TWRP and after data wipe and "reboot to recovery" it got stuck in same thing and doesn't move at all, if I hold power and vol down it just boots the device which i dont want since i need to flash magisk as a last step. if anyone encountered this or knows how to fix it i'd be helpful
I'm not rooted but I've had past Samsung devices that I was able to root and if I'm not mistaken Samsung phones aren't able to boot into fastboot mode because Samsung removed the ability to. You can run commands via ADB mode but I think that's about it
adj998 said:
I'm not rooted but I've had past Samsung devices that I was able to root and if I'm not mistaken Samsung phones aren't able to boot into fastboot mode because Samsung removed the ability to. You can run commands via ADB mode but I think that's about it
Click to expand...
Click to collapse
Yea I fixed it somehow I don't even know myself
i cant eneter into download mode by using volume up and volume down ... the only thing that happens is the battery display kicks in .. is there a trick on how long to hold the volume bottons .. or any special way of doing it .. or for the usb c while trying to connect it to the computer
it gets stuck into fastboot entering if i try to do it the old fashion way .. please help
Guys, turn off the phone, press volume up and volume down together, and plug the usb cable while pressing volume up and down, and wait until the phone enter in downloading mode. This work for me.
leonardo_evaldy said:
Guys, turn off the phone, press volume up and volume down together, and plug the usb cable while pressing volume up and down, and wait until the phone enter in downloading mode. This work for me.
Click to expand...
Click to collapse
Thanks Man. This worked.
Since we can"t enter into fastboot mode is it possible to flash boot.img with adb commands?
I m having the same problem with a21s(a217f). I can t enter download mode using key combinations and the other way launching it from recovery doesn t work, it stays stuck at,, entering fastboot mode,,
The ROM is already bricked, it says in recovery when i try to factory reset the following error:,, can t mount. /system (structure needs cleaning)
Even with,, apply up. with adb,, doesn t work, it just doesn t get detected on my computer when i checked with adb tools.
! The only thing that works is that I can access my sd card and apply a update from sd card but I don t know where to get the update file. (I ll edit if it works to flash stock rom from,, apply update from sd card,, )
Anybody got some ideas or should i burn my motherboard and replace it?
sorry for bad english
Honestly plug device into PC.
Power off device
hold all 3 side buttons. Volume up and down and power/bixby.
Should usually work.
After in fast boot you must press a button Volume button to find via odin.
ivoe said:
Honestly plug device into PC.
Power off device
hold all 3 side buttons. Volume up and down and power/bixby.
Should usually work.
After in fast boot you must press a button Volume button to find via odin.
Click to expand...
Click to collapse
I already did that, unplugged the battery, reconnected it after 1min, connected my phone to the computer and pressed all 3 side buttons, still doesn t work. I guess the download mode is deleted or something..
Volume up & down, no side key, then connect to PC. Works for me. Connect to PC first does not work for me.
guru96 said:
I already did that, unplugged the battery, reconnected it after 1min, connected my phone to the computer and pressed all 3 side buttons, still doesn t work. I guess the download mode is deleted or something..
Click to expand...
Click to collapse
It wouldn't be deleted as it's a safety protocol if the device has a bad update and freaks out.
Maybe try to person above method.
Normally I can enter download mode with any of these methods if you cannot I'd suggest trying to get the device replaced due to software malfunction
altojd said:
Since we can"t enter into fastboot mode is it possible to flash boot.img with adb commands?
Click to expand...
Click to collapse
Samsung phones use a tool called Odin to flash firmware. If you're flashing custom firmware firmware you'll need to have your bootloader unlocked.
I got mine into download mode just now. It's a Galaxy A13 .. Like stated above, try to hold all three buttons down and connect to USB. I had to let go before it showed the battery charge icon. From off. If not from off try from charging. I think that's what I did just now. Plug the usb -> let it show the charging icon (from powered off!) -> hold all three buttons, let it power on, let go. DONE.
just follow this video it helped me a lot to unlock my boot loader

Categories

Resources