Related
My phone is currently sitting with a "S/W upgrade" screen after a series of stupid events. I flashed recovery using ROM Manager before I had read that it fake flashed. I rebooted into recovery and installed CM7 nightly. Rebooted and it's stuck in a boot loop. So I finally see all the warnings against that so I figure I need to get a real recovery so I use the awesome guide from TGA_Gunnman. I follow all the instructions and it appears from the log on my PC that the CM recovery flashed successfully. I pull the cord, reinsert my battery and my phone just sits in the S/W upgrade screen. It's been like that for 30 minutes now.
What do I do?
I thought I'd done something wrong with my G2x because that happened to me too. Remove your battery and USB. Then insert your battery again. When you turn it on, make sure to hold both the power button and the volume down button until you see text that says android. If you, like me, thought you just had to hold the volume down and tap the power button (like my Nexus One), that might be your issue.
Sent from my Nexus One using Tapatalk
just disconnect usb, and go to recovery Power+vol down...
.....and congrats !
yep, I thought I bricked it too.. When you were done at the green screen where it said press any button, thats where you press whatever you want and then unplug the cord. Then, put the battery back in and hold down vol then power, don't let go until "android" pops up.. You did it man, just missing your last step..
Moved to proper forum
I can get to the Recovery screen, but I cant select any of the options....volume lets me scroll, but cant find anything to select any of the options....kinda new at this
power button to 'action' your selection... at least it works for me.
usajlh said:
My phone is currently sitting with a "S/W upgrade" screen after a series of stupid events. I flashed recovery using ROM Manager before I had read that it fake flashed. I rebooted into recovery and installed CM7 nightly. Rebooted and it's stuck in a boot loop. So I finally see all the warnings against that so I figure I need to get a real recovery so I use the awesome guide from TGA_Gunnman. I follow all the instructions and it appears from the log on my PC that the CM recovery flashed successfully. I pull the cord, reinsert my battery and my phone just sits in the S/W upgrade screen. It's been like that for 30 minutes now.
What do I do?
Click to expand...
Click to collapse
The "S/W upgrade" stays on, that's normal. See if your terminal window has completed whatever stuff it is doing. If you get a completed message, you are good to go and can safely pull out the USB chord even if your phone still says "S/W upgrade". Put back your battery and hold Power+Vol DOWN button and see if you get into cmw recovery.
so im trying to fix my friends phone and this is weird..
im able to go to cwm, wipe it all and flash a new rom.. it flashess successfully but when i reboot it goes back to the s/w update screen..it happens with any rom i flash.. its been sitting there for a while.. how long should i wait?
Once you flash the ROM you shouldn't be getting that screen...Does your friend has the G2x or 2x and which ROM did you flash?
Sounds like you screwed up the boot image. Go into APX mode again and reflash the recovery package making sure it completes, you hit a key to close the terminal window, and you hold the volume buttons the entire time. Then go into recovery and factory reset and clear the Dalvik cache. Then if you still get the S/W update screen you are going to need to go to the thread about fixing bricked phones and use the KDZ method to reflash the entire GB OTA package. There is also a new method to reinstall the entire OTA package using NVFlash but you have to hold the volume buttons down for about ten to fifteen minutes while everything flashes.
Hello everbody, I have a problem with my phone an I hope you will be able to help me. I want to appologies myself for my english, I'm French
My phone only boot in the CWM menu (where i can choose if y want reset the factory profil,...) I hope you understand me.
I would like to unistal CWM but i don't know how.
I try installing o stock recovery from my SD card but it didn't work.
I really hope you will be able to help me if you need any other information juste ask
hello everyone, I am experiencing the same problem. After the OTA update when the phone restarted, it ended in the CWM menu and it is impossible to restart the system it always ends in the recovery mode, wanting an update.zip file that doesn't exist. Can anyone help please
Try to update with this method
http://forum.xda-developers.com/showpost.php?p=18082599&postcount=1
Plug phone in dowload mode (power off phone then vol up + power,if you see lg logo release buttons)
adixtra said:
Try to update with this method
http://forum.xda-developers.com/showpost.php?p=18082599&postcount=1
Plug phone in dowload mode (power off phone then vol up + power,if you see lg logo release buttons)
Click to expand...
Click to collapse
As i said before, the phone stays in the cwm recovery menu and doesn't do anything else. If i turn off the phone and then restart it while pressing the power button and the + button volume, it is detected by the pc and installs the drivers, but nothing else.
If i try to use your method, it doesn't communicate with the pc, phone disconnected, unavailable.
Isn't there any other way..
Ok I've managed to flash the phone. just needed windows xp to work correctly with the drivers.
thanks
adixtra said:
Try to update with this method
http://forum.xda-developers.com/showpost.php?p=18082599&postcount=1
Plug phone in dowload mode (power off phone then vol up + power,if you see lg logo release buttons)
Click to expand...
Click to collapse
Thanks to take time to help me. I've try following the step on your link but on the last step, when the official LG flasher is running, I have an message saying that my phone isn't connect with my computer.
Try to reinstall drives.Remove battery, plug phone to computer, press vol+ button and insert battery.
Is the phone suppose to turn on when i put the battery in?
If you put battery and you keep VOL up ,the phone should start in download mode.
I've succesfuly did it, my phone is working again, thanks a lot.
Hi!
I have a big problem, hope that someone can help me, I have a motorola fire xt316 with android 2.3.4 installed on it, I succesfully rooted my device following this tutorial
HTML:
http://forum.xda-developers.com/showthread.php?t=1218506&page=2
.
After rooting my device I have install 'rom manager', an application on android market that lets you backup your rom, when I tried to backup it the phone shotdown.
Now my device won't start, I pulled out the battery and the sim card, even the SD card and tryed to start it again, no result, when I say no result I mean that the phone doesn't show the moto logo, nothing, just the standard soft buttons light up and the they turn off, I tried to press the POWER button while putting the battery on and the same thing, only this time it vibrates, I have tried the volum up and down, still nothing, just the vibrate and the lights of the buttons then nothing.
When I connect it to my computer, after pressing the power button, my windows 7 searches for a driver, the driver is called "Flash MSM7227" and didn't find it.
I don't know wath to do, pleas help me, I'm despret!
You bricked your phone, there is no way to help you. Sorry, I know it isn't good news.....
Hit that thank button if I helped!
and if I have the warranty, will they fix it, or figured it out that is my fault?
It is considered your fault, they wont replace sorry.
Hit that thank button if I helped!
You could try though.
Hit that thank button if I helped!
XandrUu said:
Hi!
I have a big problem, hope that someone can help me, I have a motorola fire xt316 with android 2.3.4 installed on it, I succesfully rooted my device following this tutorial
HTML:
http://forum.xda-developers.com/showthread.php?t=1218506&page=2
.
After rooting my device I have install 'rom manager', an application on android market that lets you backup your rom, when I tried to backup it the phone shotdown.
Now my device won't start, I pulled out the battery and the sim card, even the SD card and tryed to start it again, no result, when I say no result I mean that the phone doesn't show the moto logo, nothing, just the standard soft buttons light up and the they turn off, I tried to press the POWER button while putting the battery on and the same thing, only this time it vibrates, I have tried the volum up and down, still nothing, just the vibrate and the lights of the buttons then nothing.
When I connect it to my computer, after pressing the power button, my windows 7 searches for a driver, the driver is called "Flash MSM7227" and didn't find it.
I don't know wath to do, pleas help me, I'm despret!
Click to expand...
Click to collapse
Have you tried to load the bootloader?
Just press VOLUME +, VOLUME - and PWR at the same time and wait. (Until 'Enter recovery mode' message appears).
If don't appears, i think you bricked your phone, because you tried to do something very wrong. If this method don't work, send your phone to MOTOROLA and wait. There's the only thing to do.
So have you already revived the phone?
If not, do the following:
Press and hold CAMERA and VOL- buttons simultaneously
Connect USB cable
Phone will be detected as Motorola Flash Interface. And you will get the ability to flash it. It was tested by me.
mcandre said:
So have you already revived the phone?
If not, do the following:
Press and hold CAMERA and VOL- buttons simultaneously
Connect USB cable
Phone will be detected as Motorola Flash Interface. And you will get the ability to flash it. It was tested by me.
Click to expand...
Click to collapse
i have same problem (Flash MSM7227B driver not installed)
but ''mcandre'' say true
it's really working, very very thanks ''mcandre''
Please help if you can, would really appreciate, dont know how to unbick my totally F$$$$### Nexus S Phone.
Even in recovery/fastboot mode on my Nexus S (Vol up+power), I cannot get my system to recognize the device....in fact, even in Windows, I am not able to get the system to recognize my device in Recovery mode/Fastboot mode....the only way it will recognize the device is if it is turned on the normal way, and hangs on the "Google unlocked icon" screen.
Some background info:
My power button recently stopped working...I thought it had to do with the fact that I updated NexusTools (was running a CyberGR rom...cant remember the name...had V4 Ultimate in it (downloaded from Rom Manager)).
So what I did was download/install (from the same developer) their hybrid ics rom....that did not brick it...but it also did not fix the power button...so after not liking the new rom, and the fact that it didnt fix my power button, I reflashed to the original rom I had installed (wiped everything, including doing a factory reset), and it just hung on "Google unlocked icon"
Now my phone does the following:
- First of all, the only way to power the device up is to plug it in (it automatically turns on and tries to boot without me pressing the non-functional power button)
- If I let it try to boot, it infinity hangs on the Google unlocked icon screen
- If I boot into recovery (by holding vol up button and plugging the phone into a power source), it hangs on the recovery screen...meaning the power button, as well as the volume buttons, as well as any buttons are non responsive.
- If I boot into recovery, the device doesnt even register on my system....
What am I doing wrong? What can I do to try and fix this?
I would truly appreciate if anyone reading this has some insights for me.
THANKS!!
Knightsage said:
Please help if you can, would really appreciate, dont know how to unbick my totally F$$$$### Nexus S Phone.
Even in recovery/fastboot mode on my Nexus S (Vol up+power), I cannot get my system to recognize the device....in fact, even in Windows, I am not able to get the system to recognize my device in Recovery mode/Fastboot mode....the only way it will recognize the device is if it is turned on the normal way, and hangs on the "Google unlocked icon" screen.
Some background info:
My power button recently stopped working...I thought it had to do with the fact that I updated NexusTools (was running a CyberGR rom...cant remember the name...had V4 Ultimate in it (downloaded from Rom Manager)).
So what I did was download/install (from the same developer) their hybrid ics rom....that did not brick it...but it also did not fix the power button...so after not liking the new rom, and the fact that it didnt fix my power button, I reflashed to the original rom I had installed (wiped everything, including doing a factory reset), and it just hung on "Google unlocked icon"
Now my phone does the following:
- First of all, the only way to power the device up is to plug it in (it automatically turns on and tries to boot without me pressing the non-functional power button)
- If I let it try to boot, it infinity hangs on the Google unlocked icon screen
- If I boot into recovery (by holding vol up button and plugging the phone into a power source), it hangs on the recovery screen...meaning the power button, as well as the volume buttons, as well as any buttons are non responsive.
- If I boot into recovery, the device doesnt even register on my system....
What am I doing wrong? What can I do to try and fix this?
I would truly appreciate if anyone reading this has some insights for me.
THANKS!!
Click to expand...
Click to collapse
yes, sounds like a dead power button(i have one myself).
try going back into your recovery, do a full data wipe(factory reset), then reflash the rom(and gapps). if still nothing, redownload the rom and try again. in your recovery, there is an usb option. use it to transfer your newly downloaded rom from your computer to phone.
Once I am in recovery mode it "freezes" though...as in not even the volume buttons work...they worked fine before, and even work to get into recovery mode...but once there they no longer work...nor does connecting the device in recovery mode to my laptop....so im kind of at a loss, as I cant even use Fastboot/adb to wipe/push anything on the Nexus S through my laptop
Knightsage said:
Once I am in recovery mode it "freezes" though...as in not even the volume buttons work...they worked fine before, and even work to get into recovery mode...but once there they no longer work...nor does connecting the device in recovery mode to my laptop....so im kind of at a loss, as I cant even use Fastboot/adb to wipe/push anything on the Nexus S through my laptop
Click to expand...
Click to collapse
im guessing that your using cwm recovery?
give your phone a few smacks on the back near the power button, your phone thinks its being pressed in.
yes, it definitely thinks it is being pressed in...thats for sure...and makes sense...ill try that haha!
Yes latest CWM Recovery...5.0.2 or something like that...just updated that before phone died...
Weird...so i "smacked" the phone a bit...when I do it in recovery mode, it reboots the phone into recovery....so it definitely thinks its being pressed down constantly...but I have found no way to make it "un-pressed"...only briefly by smacking it...
Knightsage said:
yes, it definitely thinks it is being pressed in...thats for sure...and makes sense...ill try that haha!
Yes latest CWM Recovery...5.0.2 or something like that...just updated that before phone died...
Click to expand...
Click to collapse
in twrp recovery, theres an option to not use the power button to select(thats what im using), is there a similar option in the newer cwm recovery? tr\y pressing the soft buttons). also, see if sticking a fingernail in between the power button helps, to pull out the button a bit.
After continuingto smack it...as well as "pulling" on the power button, I am not able to use volume buttons and power buttons within recovery...flashing a new rom now...will let you know if that fixes it...otherwise I will try unbickable in ubuntu again and see if that fixes it thanks for the pro-tip of smacking it, haha!
Okay guys, I have an annoying problem. My phone after the ICS update does not want to go into CWM Recovery with the Power button + vol down (or up) method. I can never get the darn thing to work. It just loads up until the white samsung logo and then goes black and just vibrates. Any idea what could be the problem? It's an issue because it means I can't root or anything since stock won't allow me to go into recovery. The only way I used to get into recovery was through rom manager and I obviously need super user permissions to do that.
Another thing is, whenever I power on my phone with the usb cord plugged in, it automatically enters download mode. I know you're suppose to hold certain buttons but I just power the thing on and it goes straight to the DL mode screen. I'm thinking these two things could be related.
Any idea on how to fix this? I went back to complete stock and it didn't do a thing.
ArecxP said:
Okay guys, I have an annoying problem. My phone after the ICS update does not want to go into CWM Recovery with the Power button + vol down (or up) method. I can never get the darn thing to work. It just loads up until the white samsung logo and then goes black and just vibrates. Any idea what could be the problem? It's an issue because it means I can't root or anything since stock won't allow me to go into recovery. The only way I used to get into recovery was through rom manager and I obviously need super user permissions to do that.
Another thing is, whenever I power on my phone with the usb cord plugged in, it automatically enters download mode. I know you're suppose to hold certain buttons but I just power the thing on and it goes straight to the DL mode screen. I'm thinking these two things could be related.
Any idea on how to fix this? I went back to complete stock and it didn't do a thing.
Click to expand...
Click to collapse
check ur pm mate
Its power button + volume up AND down... hold both buttons and the power button.
sulpher said:
Its power button + volume up AND down... hold both buttons and the power button.
Click to expand...
Click to collapse
I wasn't being specific, I just named the buttons off the top of my head. Either way, the methods don't work
ArecxP said:
I wasn't being specific, I just named the buttons off the top of my head. Either way, the methods don't work
Click to expand...
Click to collapse
My phone was being a bit finicky with this as well, I found the below sequence to work for me every time.
Press and hold both vol+ and vol-
Press and hold power
Wait until phone is vibrating once every couple of seconds
Release power
Release vol+ and vol-
ArecxP said:
I wasn't being specific, I just named the buttons off the top of my head. Either way, the methods don't work
Click to expand...
Click to collapse
u need to b specific to get proper help.
u stated "Either way, the methods don't work ", specifically what methods r u talking about, there is only one method in using the buttons that works as RabidSmurf has stated, but first pull battery and dont keep usb plugged in, if that didnt work redownload cwm, check the md5 checksum and reflash using odin
To get into download mode I'm holding power+vol up+vol down
after the phone starts up release the power and keep holding up+down.
Let me know how it works.
ArecxP said:
Okay guys, I have an annoying problem. My phone after the ICS update does not want to go into CWM Recovery with the Power button + vol down (or up) method. I can never get the darn thing to work. It just loads up until the white samsung logo and then goes black and just vibrates. Any idea what could be the problem? It's an issue because it means I can't root or anything since stock won't allow me to go into recovery. The only way I used to get into recovery was through rom manager and I obviously need super user permissions to do that.
Another thing is, whenever I power on my phone with the usb cord plugged in, it automatically enters download mode. I know you're suppose to hold certain buttons but I just power the thing on and it goes straight to the DL mode screen. I'm thinking these two things could be related.
Any idea on how to fix this? I went back to complete stock and it didn't do a thing.
Click to expand...
Click to collapse
Make sure it is not attached to any USB. Not even the power outlet because it will take you to firmware update mode (download mode) and hold up down volume keys and power until you see the white Samsung logo. good luck!
i had to deal with this when the firmware failed to ugprade for some reason, what i did was download odin and the stock rom and flash it with odin, i was back up in no time
Not booting
Frnds plz help
After flashing am n m same soc chipset custom rom my phone is not going in cwm also another problem is after pressing the power button the phone screen is gping black n then boot audio is playing but phone is not booting completely.
To be more specific i have cqnvas 2 plus with mt6589 and pne site there was eom name note 5 evolution for a116 hd with same soc i.e. mt6589 hence i flashed the rom it flashed succesfully also but then the problems occurred.
Plz help me fast thx in advance.