Hi!
I have a big problem, hope that someone can help me, I have a motorola fire xt316 with android 2.3.4 installed on it, I succesfully rooted my device following this tutorial
HTML:
http://forum.xda-developers.com/showthread.php?t=1218506&page=2
.
After rooting my device I have install 'rom manager', an application on android market that lets you backup your rom, when I tried to backup it the phone shotdown.
Now my device won't start, I pulled out the battery and the sim card, even the SD card and tryed to start it again, no result, when I say no result I mean that the phone doesn't show the moto logo, nothing, just the standard soft buttons light up and the they turn off, I tried to press the POWER button while putting the battery on and the same thing, only this time it vibrates, I have tried the volum up and down, still nothing, just the vibrate and the lights of the buttons then nothing.
When I connect it to my computer, after pressing the power button, my windows 7 searches for a driver, the driver is called "Flash MSM7227" and didn't find it.
I don't know wath to do, pleas help me, I'm despret!
You bricked your phone, there is no way to help you. Sorry, I know it isn't good news.....
Hit that thank button if I helped!
and if I have the warranty, will they fix it, or figured it out that is my fault?
It is considered your fault, they wont replace sorry.
Hit that thank button if I helped!
You could try though.
Hit that thank button if I helped!
XandrUu said:
Hi!
I have a big problem, hope that someone can help me, I have a motorola fire xt316 with android 2.3.4 installed on it, I succesfully rooted my device following this tutorial
HTML:
http://forum.xda-developers.com/showthread.php?t=1218506&page=2
.
After rooting my device I have install 'rom manager', an application on android market that lets you backup your rom, when I tried to backup it the phone shotdown.
Now my device won't start, I pulled out the battery and the sim card, even the SD card and tryed to start it again, no result, when I say no result I mean that the phone doesn't show the moto logo, nothing, just the standard soft buttons light up and the they turn off, I tried to press the POWER button while putting the battery on and the same thing, only this time it vibrates, I have tried the volum up and down, still nothing, just the vibrate and the lights of the buttons then nothing.
When I connect it to my computer, after pressing the power button, my windows 7 searches for a driver, the driver is called "Flash MSM7227" and didn't find it.
I don't know wath to do, pleas help me, I'm despret!
Click to expand...
Click to collapse
Have you tried to load the bootloader?
Just press VOLUME +, VOLUME - and PWR at the same time and wait. (Until 'Enter recovery mode' message appears).
If don't appears, i think you bricked your phone, because you tried to do something very wrong. If this method don't work, send your phone to MOTOROLA and wait. There's the only thing to do.
So have you already revived the phone?
If not, do the following:
Press and hold CAMERA and VOL- buttons simultaneously
Connect USB cable
Phone will be detected as Motorola Flash Interface. And you will get the ability to flash it. It was tested by me.
mcandre said:
So have you already revived the phone?
If not, do the following:
Press and hold CAMERA and VOL- buttons simultaneously
Connect USB cable
Phone will be detected as Motorola Flash Interface. And you will get the ability to flash it. It was tested by me.
Click to expand...
Click to collapse
i have same problem (Flash MSM7227B driver not installed)
but ''mcandre'' say true
it's really working, very very thanks ''mcandre''
Related
Hi:
I was performing the update to Froyo from version 2.1 (Eclair) and looks like the process was stock... I try to reboot the phone and now I have on the screen two symbols one is a phone icon and the other is a PC... Does anyone know what this mean?? It doesnt boot...
Thanks
You need to flash your phone with odin
Sent from my SAMSUNG-SGH-I897 using XDA App
use odin 1 click to flash back to stock
looks like the PC doesnt see the device. I dont see that the usb is recognizing the device. Any idea on how to accomplish this.???
Thanks
i'm stuck. i have a computer and phone icon with a yellow sign in between. nothing happens. did i just brick my phone??
yeah its bricked. send it to me.
seriously....a little bit of searching the forums would save you the hassle of waiting for someone to answer something you can figure out yourself:
http://forum.xda-developers.com/showthread.php?t=731989
Thanks for the link. I did a lot of search and I found the link you posted here. I follow the instructions on how to enter in download mode but neither work...Any more ideas?
THanks
Your phone is bricked. There is one way to get out that screen and enter download mode. But somehow the instructions of doing it was removed from the linked thread above. I've been there once and recovered. IIRC, you need to:
1. Take out SIM card and SD card.
2. Hold Vol Up and Vol Down. Press and hold Power button.
3. Hold all three buttons while waiting for phone to power up then go blank. It will power back on again.
Hopefully, the second time it power back on, it will enter download mode and you can let go the buttons.
If your phone is one of those with 3-button download mode disabled, you are SOL.
Its this something that can be fix? Or I just put the phone on the trash... If this can be fix where?
Thanks
You can try your luck with warranty service.
Or try the procedure described here for 'semi-bricked' phone: http://samsungcaptivate.wikia.com/wiki/Putting_the_Phone_into_Download_Mode
If the phone is "semi-bricked"; i.e., the "phone-exclamation mark-computer" picture appears on power up (perhaps from a bad ROM flash):
* Be sure the Samsung USB drivers for the phone are installed on your computer.
* Remove and replace the battery.
* Connect the phone to the computer with the USB cable. The "phone-exclamation mark-computer" picture should display on the phone's screen.
* Hold the Volume Up+Volume Down+Power buttons down simultaneously.The screen should go blank, then the picture should appear again. When the screen goes blank a second time, release the Power button while continuing to hold the Volume Up+Volume Down buttons down.
Click to expand...
Click to collapse
Hi all,
I was trying to install a new Rom Dronix 0.4. Upon entering the bootloader I accidentaly somehow no idea how,deleted clockwork mod recovery that was on there and now just can't get into bootloader mode or even get my phone to start up past the 1st screen.I've tried volume up +green button and power button to try to get in,volume down + end call red button and power button no go.The only thing it goes into is if I hold the volume down button + call green button and power which takes me to the firmware update but just flashes and says unpack failed.The other thing is that if press the red and green buttons for calls and the power button it brings the screen to a purplish colour but does nothing as well.I've tried to get the computer to recognize the phone but it won't even after installing the usb drivers with windows xp and windows 7.Atm there is no ROM on the phone after deleting it,cache and dalvik cache. It's just empty with not even a bootloader to try and boot into, only hardware is available now.
I'm at a loss as to what and any help if trying to get it back and running would be appreciated.
Thanks,
Paul
Flash UltraJack recovery from the PC.
http://forum.xda-developers.com/showthread.php?t=908178
hello, i think you kinda deleted the boot!!
try following instructions on this
http://forum.xda-developers.com/showthread.php?t=1011527
ITS SAYS UPDATE FAILS CUASE YOU DONT HAVE THE FIRMWARE on YOUR SD CARD>>>DO YOU???? JUST GO TO THEAD AND FOLLOW INSTRUCTIONS AND LET ME KNW!
YOU SIR ARE A CHAMPION!!!!!!!! If ever you are in Sydney, Australia I'll be treating you a few beers if you do drink heh.
Again THANK YOU!!!!
Dear All,
I tried to upgrade my HTC Hero from Andriod 1.5 to 2.1 . Everything was OK but last moment Upgradation went failed and Handset automatically shutdown. I tried to powered it up but no fruitfull result. I checked the battery by inserting in some other handset, It was OK. Thats mean there is no issue with battery. Handset doesnt show charging indication while connected to charger. I also tried to power it up in safe mode by pressing combination of keys but no result.
Kindly suggest solutions to power up HTC Hero. Thanks in advance.
is this a cdma hero or gsm hero?
you could try and fastboot usb and run the ruu again
It is GSM HTC HERO.......Please tell me way to do fastboot....Please Help
When I pressed HOME+POWER ON/END CALL button.........There is little vibration.....Nothing else
waiting for reply for some one.....Thanks
When I pressed HOME+POWER ON/END CALL button.........There is little vibration.....Nothing else
waiting for reply for some one.....Thanks
I tried to put handset in fastboot mode but no result...i pressed back+power for fastboot mode..............................waiting for further instruction
Do you get a vibration? If so download fastboot drivers and fastboot files. Try flashing a ROM using fastboot.
Donwload and install this first: http://forum.xda-developers.com/showthread.php?t=1126671
Download and extract these: http://forum.xda-developers.com/showthread.php?t=1055888
After the vibration, open CMD, cd to the folder where you extracted fastboot and type fastboot and then press enter. If you see your device listed in fastboot, download fastboot images for your phone and flash them.
I got vibration when i pressed home+power button.....I didnt get any response from my handset if i pressed back+power and volume down+power button...Please tell me can i do above procedure in this state...............................
Dear Nibras,
I tried the whole procedure but handset didnt power up. I want to explain the issue again to you, Handset doesnt show any thing when I press power button, LCD doesnt glow nor handset vibrate. Its Just like dead phone but when I pressed home+power button, it vibrates.
This Issue came, when I was just tried to upgrade it from Andriod 1.5 to 2.1, this upgradation failed due to some reason and after this handset is not powering up.
When I connected it with PC. PC doesn't recognize any hardware connect to it.
I need your help as my handset is out of warranty.
Thanks and Best Regards,
muqaddas_dunyatv said:
Dear Nibras,
I tried the whole procedure but handset didnt power up. I want to explain the issue again to you, Handset doesnt show any thing when I press power button, LCD doesnt glow nor handset vibrate. Its Just like dead phone but when I pressed home+power button, it vibrates.
This Issue came, when I was just tried to upgrade it from Andriod 1.5 to 2.1, this upgradation failed due to some reason and after this handset is not powering up.
When I connected it with PC. PC doesn't recognize any hardware connect to it.
I need your help as my handset is out of warranty.
Thanks and Best Regards,
Click to expand...
Click to collapse
I don't think I can help anymore. I guess the phone is bricked. Try connecting your handset to another PC and follow the same procedure.
Even if the handset is out of warranty, take it to Service Center and tell them your phone won't power up. Don't tell about the failed upgrade. If they could just reprogram the PCB, let them do it. If they say, they want to change the PCB/motherboard, forget it and get a new phone.
It's sad you waited this long to upgrade to 2.1. You should've done it during the warranty period.
Hello everbody, I have a problem with my phone an I hope you will be able to help me. I want to appologies myself for my english, I'm French
My phone only boot in the CWM menu (where i can choose if y want reset the factory profil,...) I hope you understand me.
I would like to unistal CWM but i don't know how.
I try installing o stock recovery from my SD card but it didn't work.
I really hope you will be able to help me if you need any other information juste ask
hello everyone, I am experiencing the same problem. After the OTA update when the phone restarted, it ended in the CWM menu and it is impossible to restart the system it always ends in the recovery mode, wanting an update.zip file that doesn't exist. Can anyone help please
Try to update with this method
http://forum.xda-developers.com/showpost.php?p=18082599&postcount=1
Plug phone in dowload mode (power off phone then vol up + power,if you see lg logo release buttons)
adixtra said:
Try to update with this method
http://forum.xda-developers.com/showpost.php?p=18082599&postcount=1
Plug phone in dowload mode (power off phone then vol up + power,if you see lg logo release buttons)
Click to expand...
Click to collapse
As i said before, the phone stays in the cwm recovery menu and doesn't do anything else. If i turn off the phone and then restart it while pressing the power button and the + button volume, it is detected by the pc and installs the drivers, but nothing else.
If i try to use your method, it doesn't communicate with the pc, phone disconnected, unavailable.
Isn't there any other way..
Ok I've managed to flash the phone. just needed windows xp to work correctly with the drivers.
thanks
adixtra said:
Try to update with this method
http://forum.xda-developers.com/showpost.php?p=18082599&postcount=1
Plug phone in dowload mode (power off phone then vol up + power,if you see lg logo release buttons)
Click to expand...
Click to collapse
Thanks to take time to help me. I've try following the step on your link but on the last step, when the official LG flasher is running, I have an message saying that my phone isn't connect with my computer.
Try to reinstall drives.Remove battery, plug phone to computer, press vol+ button and insert battery.
Is the phone suppose to turn on when i put the battery in?
If you put battery and you keep VOL up ,the phone should start in download mode.
I've succesfuly did it, my phone is working again, thanks a lot.
Hey,
I had this problem with my Moto G 2013 (xt1032). I was installing a ROM with TWRP but, unfortunately, the process failed. I decided to leave TWRP and proceed into recovery mode in order to install the stock rom by adb. Right before leaving TWRP, a pop up showed up saying "No OS installed. Are you sure you wish to proceed?" After that, the phone turned off, and I tried going into recovery mode (vol -, power button), and it wasn't working. That was when I found out my phone was dead. I've tried to hold the vol - and the power button for like 2 min and it didn't work. I have also tried the "blank-flash.bat" method but it didn't work as well because there is no OS installed on my phone. I have done lots of research on pushing a ROM but I don't really think that is going to work. If any of you guys can help me on this I would be really glad because I really loved this device. Thanks! (forgot to mention that my PC recognizes my phone and that every time I connect my phone to the USB cable, the LED blinks and every time I hold the power button for 6 seconds, the LED blinks and I think the phone restarts or something.) Finally, thanks for opening my thread and for helping me!