Database Info

[Xperia M2][D2305] How to recover from bootloop after unlock bootloader

[Xperia M2][D2305][4.3] 18.0.A.1.30
XPERIA M2 Recovery from Brick and more...etc
u can only use this 2 item
Flash tool
http://www.flashtool.net/index.php
[Drivers] FlashTool Xperia Driver Pack (v1.5) [20140318]
http://forum.xda-developers.com/showthread.php?t=2635830
D2305_18.0.A.1.30_Global Generic by Sai Arkar
https://mega.co.nz/#!tc4G0Ahb!5MQuH17IY5OwBE50Mlb5SzHBE1G04UOyGz6q9YipoYI
1.Download and install Flashtool on your PC.
2.Download the firmware you need (from the list below) and move it into the directory C:/Flashtool/firmwares
3.Open Flashtool, click on the lightning symbol ("flash device"), select "Flashmode" and click on "OK"
4.Just select the name of what you downloaded and click on "Flash"
5.Wait for a window to pop up (it may take a few minutes, be patient)
6.Now everything is ready: turn off your phone
7.Push the volume-down button, keep pushing and connect to your PC
8.Once the flashing process has started, release the volume rocker as soon as possible
9.NEVER disconnect the USB cable until it's finished!!!
10.Turn on and enjoy!
IMPORTANT:
if you are using Windows 8 you will need to enable few things to allow driver installation
If you are a Windows 8.1 user, you must see this video
https://www.youtube.com/watch?v=NM1MN8QZhnk
Please contact us if there is anything we can do.
Twitter
https://twitter.com/kum4423

Phone will not switch on ...
Tried unlocking the boootloader following instructions from the Sony website,
after "sucessfully" unlocking the bootloader in flashboot mode the phone got stuck in a boot loop.
Eventually stopped the phone boot looping by pressing all the buttons at the same time, have now found out it is the two volume buttons and the power button, then the phone did not switch on at all, tried connecting and holding volume button etc, to USB but all that comes up in device manager is "unknown device" and the flash tool does not recognise it in any mode, found out that holding the power button down for five minutes reboots the phone. Then flashed with above firmware and ended up in another bootloop, holding the up volume and power button makes the phone vibrate once then three times, let go after one and then you can get into flashmode, this time I flashed the latest firmware from http://forum.xda-developers.com/showthread.php?t=2762296 and it worked.

fonephreak said:
Tried unlocking the boootloader following instructions from the Sony website,
after "sucessfully" unlocking the bootloader in flashboot mode the phone got stuck in a boot loop.
Eventually stopped the phone boot looping by pressing all the buttons at the same time, have now found out it is the two volume buttons and the power button, then the phone did not switch on at all, tried connecting and holding volume button etc, to USB but all that comes up in device manager is "unknown device" and the flash tool does not recognise it in any mode, found out that holding the power button down for five minutes reboots the phone. Then flashed with above firmware and ended up in another bootloop, holding the up volume and power button makes the phone vibrate once then three times, let go after one and then you can get into flashmode, this time I flashed the latest firmware from http://forum.xda-developers.com/showthread.php?t=2762296 and it worked.
Click to expand...
Click to collapse
tried connecting and holding volume button etc, to USB but all that comes up in device manager is "unknown device" and the flash tool does not recognise it in any mode, found out that holding the power button down for five minutes reboots the phone.
Click to expand...
Click to collapse
Did you read this? and tried it?
IMPORTANT:
if you are using Windows 8 you will need to enable few things to allow driver installation
If you are a Windows 8.1 user, you must see this video
https://www.youtube.com/watch?v=NM1MN8QZhnk
Then flashed with above firmware and ended up in another bootloop, holding the up volume and power button makes the phone vibrate once then three times, let go after one and then you can get into flashmode, this time I flashed the latest firmware from
Click to expand...
Click to collapse
u can only use this listed item
Flash tool
[Drivers] FlashTool Xperia Driver Pack (v1.5) [20140318]
D2305_18.0.A.1.30_Global Generic by Sai Arkar←This FTF file is most important

Help please?
Hi man, I need your help urgently... I tried flashing kernel image to my Xperia M2 D2303, but I got impatient as recovery mode wasn't coming on and I did in in fastboot mode instead. Now it's stuck on boot loop and the screen only flashes. I can't get it to connect to my computer either, my computer just doesn't recognize it anymore. So, I can't flash anything on to it to recover it now either, and I tried putting files into my SD card to restore from but those files won't show when I try to download from zip using Clockwork Mod. What should I do?
Update
I tried to flash a custom rom into it, but even though I remember turning USB debugging on, it seems it's off. And plus, the drivers link you gave don't include the Xperia m2 drivers.

It would not connect to Flash modehttp://dl-1.va.us.xda-developers.com/2/9/8/5/4/7/8/NewPicture002.jpg?key=xzdzp41r6BQtbbijWRPtQA&ts=1414307092

Could You please update link for :
"D2305_18.0.A.1.30_Global Generic by Sai Arkar"
can't download file, please help
Thank You

bricked huawei g730

hello there,
I have huawei g730-u10
"MTK6582, quadcore cortex A7, 1GB Ram, 4GB Rom"
last week, I was trying to install a CWM recovery using "mobile uncle" app. after it finished , a prompt for restarting appears and I pressed "yes".
it was the last time seeing my phone alive!!! it restarts to huawei logo for about 20 seconds and restarts again and again and again....
unfortunately my device doesn't have a rom online, even on HUAWEI website, so, I downloaded a similar phone ROM "hdc-s5-gold" to use its preloader, cache, boot , etc
the problem is when I connect the phone to SP flashtools the red bar appears and then it holds for seconds and a message with connection loss appears while the phone is going in its infinite restart.. so the flashtools seems to find the phone for a while but fails to write to it thanks to power loss.
notes:
1. I have tried many flashtool versions
2. I have tried with and without battery connection, and with and without volume up holding.
3. the phone can't access to CWM, download mode or factory reset mode.
4. the drivers are installed shows: "MT65xx preloader" and I think there is no driver problem
5. even when I connect the phone to charger, it keeps restarting and the charging logo doesn't appear
I appreciate any help

SP log files attached
thanks

elkhopoa said:
hello there,
I have huawei g730-u10
"MTK6582, quadcore cortex A7, 1GB Ram, 4GB Rom"
last week, I was trying to install a CWM recovery using "mobile uncle" app. after it finished , a prompt for restarting appears and I pressed "yes".
it was the last time seeing my phone alive!!! it restarts to huawei logo for about 20 seconds and restarts again and again and again....
unfortunately my device doesn't have a rom online, even on HUAWEI website, so, I downloaded a similar phone ROM "hdc-s5-gold" to use its preloader, cache, boot , etc
the problem is when I connect the phone to SP flashtools the red bar appears and then it holds for seconds and a message with connection loss appears while the phone is going in its infinite restart.. so the flashtools seems to find the phone for a while but fails to write to it thanks to power loss.
notes:
1. I have tried many flashtool versions
2. I have tried with and without battery connection, and with and without volume up holding.
3. the phone can't access to CWM, download mode or factory reset mode.
4. the drivers are installed shows: "MT65xx preloader" and I think there is no driver problem
5. even when I connect the phone to charger, it keeps restarting and the charging logo doesn't appear
I appreciate any help
Click to expand...
Click to collapse
I'm not sure but i did find links for G730 official ROM.
There are 6 ROMs for this model, G730-U30, G730-C00, G730-T00, G730-U00 & more..
ROMs LINK
Then another link: Huawei G730-U00,Android 4.2,Emotion UI,V100R001CHNC17B137 Official Firmware
Seem's like there is stuff out there on internet, no offence. Just sharing information. Well, back to the bricked situation.... As i remember, there are methods to restore/fix semi/soft-bricked phone. Hope you find the solution. Search forum/internet.
I'm not an expert. Thats all i can share.

I have same problem.How to solve it.

same problem, what to do???

elkhopoa said:
hello there,
I have huawei g730-u10
"MTK6582, quadcore cortex A7, 1GB Ram, 4GB Rom"
last week, I was trying to install a CWM recovery using "mobile uncle" app. after it finished , a prompt for restarting appears and I pressed "yes".
it was the last time seeing my phone alive!!! it restarts to huawei logo for about 20 seconds and restarts again and again and again....
unfortunately my device doesn't have a rom online, even on HUAWEI website, so, I downloaded a similar phone ROM "hdc-s5-gold" to use its preloader, cache, boot , etc
the problem is when I connect the phone to SP flashtools the red bar appears and then it holds for seconds and a message with connection loss appears while the phone is going in its infinite restart.. so the flashtools seems to find the phone for a while but fails to write to it thanks to power loss.
notes:
1. I have tried many flashtool versions
2. I have tried with and without battery connection, and with and without volume up holding.
3. the phone can't access to CWM, download mode or factory reset mode.
4. the drivers are installed shows: "MT65xx preloader" and I think there is no driver problem
5. even when I connect the phone to charger, it keeps restarting and the charging logo doesn't appear
I appreciate any help
Click to expand...
Click to collapse
Universal unbrick guide:
Terminology - types of bricks:
Soft brick - often occurs in the shape of a bootloop or any other problems with booting such as always getting to recovery or not getting past the carrier logo. This type of a brick, which shows some signs of life, can in most cases be fixed.
Hard brick - As the name implies, your phone can essentially used as a brick and it shows no signs of life. This kind of a brick is rare and in theory should be unfixable. However there are advanced methods of fixing your phones such as JTAG, but they require extra tools and accessories.
The decision:
Is my phone soft or hard bricked?
If you answer yes to all of the questions below you probably have a hard birck:
Test as said in order!
Nothing happenes when you hold or press the power button
You cannot get the screen to even turn on by pressing or holding any combination of buttons on your phone
Nothing happenes if you do the same as about but with your phone plugged into a charger
Nothing happenes when you plug your phone into a computer
When you plug in your phone into a computer it does not recognize it as a phone, storage or any other media device
Nothing happenes when you try all of the above again, but with removing the battery in between steps for 10 seconds and putting it back in again
Nothing happenes when you try all of the above again, but after leaving the phone plugged into a charger for 2 hours
If all of the questions are a "yes", then you either have a broken charging port and and a discharged battery or you have a hard brick.
The unbricking:
There are many methods of unbricking and they are all different to each phone. Here I will list the most common methods that often succeed.
Samsung users skip to 4. method.
1. If you have access to a stock recovery:
Method 1:
1. Shut down / turn off your phone.
2. Boot into Recovery mode – hold down the volume down button and then hold the power button (the button combination is different for every phone. Look yours up on Google)
3. Use volume keys to navigate the menus, and power button to select the menu items (Again, might be different for every phone)
4. Choose “Wipe Cache Partition”.
5. Choose “Wipe Data / Factory Reset” to delete all your settings and apps, using the correct ROM.
6. Reboot your device.
Method 2:
Download the stock rom for your phone. It should be in ".zip" format. Make sure it's the official version
(Find it by Googling something like "[your phone model] stock rom")
Put the file on your phone's external SD card.
Make sure that the rom is for your exact phone model.
1. Shut down / turn off your phone.
2. Boot into Recovery mode – hold down the volume down button and then hold the power button (the button combination is different for every phone. Look yours up on Google)
3. Use volume keys to navigate the menus, and power button to select the menu items (Again, might be different for every phone)
4. Select "apply update from external storage"
5. Navigate to the zip file you copied to your phone
6. Install it.
If you get Status Error 7 that means you didn't download an official stock rom.
2. If you have access to a custom recovery:
Method 1:
Try stock recovery method 1
Method 2:
1. Find a stable custom rom for your phone or if you want to download the stock rom
Make sure that the rom is for your exact phone model.
2.. Copy the zip file to the phone's external SD.
3. Install the zip
(If you have a custom recovery you probably know the drill)
3. If you have access to fastboot mode:
First install ADB and fastboot drivers (if you haven't already):
To install it on windows there is a handy tool called the 15 Second ADB installer which will install pretty much everything you need.
On Ubuntu install with:
Code:
sudo apt-get install android-tools-adb android-tools-fastboot
On Fedora:
Code:
sudo dnf install android-tools
On OS X using Homebrew:
Code:
brew install android-platform-tools
Once you have the drivers installed you have to find a recovery image for your phone to install a custom recovery.
You can try one of the popular recoveries such as CWM or TWRP.
You need to get the recoveryNameHere.img file for your phone.
Find it by Googling:
"[your phone model] TWRP recovery"
or
"[your phone model] CWM recovery"
Make sure that the recovery is for your exact phone model.
Now on your phone enter fastboot mode:
Turn your phone off.
You can try different button combinations. For my phone it's holding power and volume down buttons.
Once you're in fastboot mode plug your phone into a computer and open your terminal/cmd.
Type in:
Code:
fastboot devices
You should see a list of devices. There should be only one device ID number.
If you see the ID it's working. If you don't you didn't install the Google USB driver properly (on Windows) and if it says "'fastboot' is not a recognized command" or "No command 'fastboot' found" then you didn't even install your drivers.
If you have problems with installing Google "how to install adb and fastboot drivers"
Now that you know fastboot is working type in:
Code:
fastboot flash recovery C:\Path\To\Recovery.img
Replace "C:\Path\To\Recovery.img" with an actuall path of the recovery file you downloaded.
It should say success.
If it doesn't try to execute:
Code:
fastboot oem unlock
This will delete all data you had on your phone (games, game progress, apps...).
Now try
Code:
fastboot flash recovery C:\Path\To\Recovery.img
again.
Once you're done type in:
Code:
fastboot reboot
And your phone should still not work. Now what you have to do it try the custom recovery method above (number 2.)
4. If you have a Samsung device:
Try this tutorial of unbricking with Odin: click here

HELP Please; soft brick

Hi everyone.
Ok back in August I purchased an Oppo r7plus "m" version not knowing the difference, from a 3rd party seller. I know I probably should've waited until the phone would go on sale in Canada but I wasn't sure if it ever would. So anyways the phone worked great for a while. I noticed that it came pre loaded with OPPO Tools and Super SU. I thought wow, this phone is rooted right of the box? Great! So I started uninstalling some native apps of which I thought were just "bloatware", everything went fine until I uninstalled the weather app.
When I turned the phone back on after restarting, it now goes into the OS but continuosly flashes on and off and you can only access the dropdown notification screen. Luckily from there I can still access the settings menu. I tried holding the power button and volume down button to go to the factory boot screen. That worked and in there its says the color os version, but in brackets says
(rooted).
I can only assume the phone is still rooted but is stuck in some sort of soft brick. I've been doing alot of reading into how I might be able to fix the phone but I'm having trouble figuring it out. I'm good with computers and all but not to this level and I never rooted an android phone before.
Please somebody HELP.

So I've downloaded the ROM for my phone model, r7 plus m, and I transfered the zip file over to the internal storage of the device. I then held down the volume down and power buttons to boot to color os recovery. Than I cleared cache and install from sd found the zip file and it started to run.
After about a minute or two into the installation it stops and reads "Installation Failed". I'm thinking I need a recovery.img file but I'm not sure. Even if I had that file I don't know what to do next.
Anyone have any ideas?

NALSONSON said:
So I've downloaded the ROM for my phone model, r7 plus m, and I transfered the zip file over to the internal storage of the device. I then held down the volume down and power buttons to boot to color os recovery. Than I cleared cache and install from sd found the zip file and it started to run.
After about a minute or two into the installation it stops and reads "Installation Failed". I'm thinking I need a recovery.img file but I'm not sure. Even if I had that file I don't know what to do next.
Anyone have any ideas?
Click to expand...
Click to collapse
Hi, how did you sort it? Are you still in need of stock recovery? I have one for model F, dont know if it works with M model.

1. Download and extract my RAR files ---> HERE
2. Open your PC device manager
3. Connect an usb cable only to your pc then press and hold the phone volume + button and then connect the usb cable to the phone
3. In the device manager you will see Qhsub_bulk then release the volume+ button
4. Right click on Qhsub_bulk and choose update driver
5. Use one of the driver folders which you alredy extract to install the Qualcomm driver and you will see it like 9008
6. Your phone have to be charged very well for a few hours before you try to flash it.
7. Remove it from the charger then connect an usb cable only to your pc.
8. Try to press and hold the volume + and power buttons at the same time for a few seconds and connect the usb cable to the phone.
9. You have to see the driver in the device manager like 9006 (you can release the buttons) [it wasn't easy for me so keep trying]
10. Open the MSMDownloader and press start
11. If everything is ok you will see a green progress bar flashing. (I was stuck here with the "NON-HLOS.bin" file which you can see in the "Other NON-HLOS File" folder inside the rom which you download)
12. When the process complete in about 10 minutes you can remove the usb cable from your phone.
13. Now you have to do a veeeeeeeery long press and hold on your power button untill you feel the vibration and after that you will see the OPPO logo.
14. Leave it for 5-10 minutes to load the Color OS.
15. Ok you have a working phone but still some apps icons that are missing and the keyboard doesn't appear when you have to write something.
16. Download THIS zipped ROM and put it in the internal storage of your phone.
17. Shut down the phone then press and hold the volume - and the power button at the same time for a while intil you enter into recovery mode.
18. Choose english and then install rom from zip file. After the installation complete reboot the phone and you will get a working keyboard and few more apps like Browser, Chinese market and else....
For me i still need to insert the IMEI's because they are lost... and now i have message: Oppo nv backup. The NV partition is invalid...
Good luck to all! And if you want to give me a beer: paypal: [email protected]

Still stuck
I still can’t detect any qhsub_bulk in device manager. Even I reformat my pc to window 7 64bit it still not detecting. What it detected was only like Android usb.
Oppo r7 plusm suspected soft brick with rooted.
- stuck at oppo logo
- try recovery with stock rom but error * failed to update*
- wipe all but still same failed to update
- try the guild here but can’t detect my device with the tool

Soft bricked device, can't unlock, need help.

I'm on Android 5.0.1. I changed my PIN screen lock of my xperia and 20 minutes later I forgot it out of lots of things happening at once. I try to guess it 120 times (5.0 doesn't have "Enter google password" after x tries) without any progress (I was still at school at this point). I tried to boot to recovery and wipe it, but because I had Cyanogenmod recovery it didn't work. (it doesn't work at all, when I try to wipe it, it just displays the Android and flashes a few times and that's it.). At home, I tried to use Android Device Manager to erase it, but it just rebooted into Android. I tried to unlock the screen with the lock feature, but it didn't work at all, nothing happened (if I put something in the text field it allowed me to call owner. Pressing back or home puts me back in the lock screen "swipe up to unlock" state. I tried reflashing it with flashtool, but I couldn't even connect my device through ADB, it only said
Code:
04/034/2015 18:34:13 - INFO - Device connected with USB debugging off
04/034/2015 18:34:13 - INFO - For 2011 devices line, be sure you are not in MTP mode
even though USB debugging was on, even the notification said so. ADB just doesn't find it at all. When I plug my device in my computer the window that pops up says "This folder is empty". Am I really screwed? I guess my only chance is to keep guessing the password... I don't remember the first number or how many numbers were in it... help?

pefu19 said:
I'm on Android 5.0.1. I changed my PIN screen lock of my xperia and 20 minutes later I forgot it out of lots of things happening at once. I try to guess it 120 times (5.0 doesn't have "Enter google password" after x tries) without any progress (I was still at school at this point). I tried to boot to recovery and wipe it, but because I had Cyanogenmod recovery it didn't work. (it doesn't work at all, when I try to wipe it, it just displays the Android and flashes a few times and that's it.). At home, I tried to use Android Device Manager to erase it, but it just rebooted into Android. I tried to unlock the screen with the lock feature, but it didn't work at all, nothing happened (if I put something in the text field it allowed me to call owner. Pressing back or home puts me back in the lock screen "swipe up to unlock" state. I tried reflashing it with flashtool, but I couldn't even connect my device through ADB, it only said
Code:
04/034/2015 18:34:13 - INFO - Device connected with USB debugging off
04/034/2015 18:34:13 - INFO - For 2011 devices line, be sure you are not in MTP mode
even though USB debugging was on, even the notification said so. ADB just doesn't find it at all. When I plug my device in my computer the window that pops up says "This folder is empty". Am I really screwed? I guess my only chance is to keep guessing the password... I don't remember the first number or how many numbers were in it... help?
Click to expand...
Click to collapse
Hi bro.
Download this file Here.
Extract it on your desktop.
Now this file will install the cwm recovery.
Open a command window in the folder you have extracted.
Type
fastboot flash boot boot.IMG
Now before pressing enter you just need to power off your phone connecting it to the computer while holding volume + key .
Now you can press enter.
After you flash the recovery boot to recovery and make a factory reset.
Note: after this process the WiFi may not work you just need to install this app http://forum.xda-developers.com/xperia-l/development/app-recoveries-recovery-installer-t3187915 and give root and install TWRP.
And don't worry windows won't show the internal or the external memory because your phone is locked it's kind of protecting your files .
Don't forget to hit thanks

n78 shadow said:
Hi bro.
Download this file Here.
Extract it on your desktop.
Now this file will install the cwm recovery.
Open a command window in the folder you have extracted.
Type
fastboot flash boot boot.IMG
Now before pressing enter you just need to power off your phone connecting it to the computer while holding volume + key .
Now you can press enter.
After you flash the recovery boot to recovery and make a factory reset.
Note: after this process the WiFi may not work you just need to install this app http://forum.xda-developers.com/xperia-l/development/app-recoveries-recovery-installer-t3187915 and give root and install TWRP.
And don't worry windows won't show the internal or the external memory because your phone is locked it's kind of protecting your files .
Don't forget to hit thanks
Click to expand...
Click to collapse
I did what you told me to do, and it says < waiting for device > in the console. The device displays a blue LED after I volume+ and plug the USB in. I then enter the command and it's just stuck at < waiting for device >.

pefu19 said:
I did what you told me to do
Click to expand...
Click to collapse
Did you have fastboot driver installed?
If not go to flashtool folder then to drivers there you will see a exe file ,open it and install fastboot drivers and xperia l derivers.
Edit: and I think it should be installed automatically by windows just wait for it.

n78 shadow said:
Did you have fastboot driver installed?
If not go to flashtool folder then to drivers there you will see a exe file ,open it and install fastboot drivers and xperia l derivers.
Edit: and I think it should be installed automatically by windows just wait for it.
Click to expand...
Click to collapse
I think I have them installed, but when I go to the flashtool drivers folder and install those drivers, I select xperia L drivers and the 2 on top, it says Install Failed for all of them

What windows do you use???
If 8 I think it won't work , you should try it on another one

n78 shadow said:
What windows do you use???
If 8 I think it won't work , you should try it on another one
Click to expand...
Click to collapse
I have Windows 10 x64

pefu19 said:
I have Windows 10 x64
Click to expand...
Click to collapse
Sorry bro that won't work try it on another computer with 7 or lower.
Don't forget to hit thanks if I hleped you

pefu19 said:
I have Windows 10 x64
Click to expand...
Click to collapse
windows 10 has a special 3rd party driver protection... you must disable it and install fastboot driver... AND you need a USB2.0 because 3.0 has known issues
Sent from my Xperia T using XDA Free mobile app

In Window 10 go to setting>update&security>Recovery>Advanced startup and restart pc >then choose troubleshoot>Advanced Option>Startup Setting and restart>and it will ask option choose Disable Driver signature enforcement and done......
if you have any problem ask...:laugh:

Neffos X-1 stuck in bootloop

Heya folks,
I have just attempted my first time flashing TWRP on my TP-Link Neffos X-1 following this guide: https://rootmygalaxy.net/twrp-root-...nd_Install_TWRP_Recovery_On_TP-Link_Neffos_X1.
Its looking kinda grim. It starts with the orange state Message and that the device will boot in 5 seconds, however after that it starts with an infinite bootloop. I also cannot access the Recovery (vol up + power), for it simply doesnt work anymore after the guide. When I plug it into my pc, it will automatically start with the bootloop (I can shut the phone off with vol down + power).
Attempting to get into fastboot mode over ADB (adb reboot bootloader), returns with the message error: device '(null)' not found. I think that is due to it not being recognized in the device manager(it doesnt show my phone anymore but unknown device). I tried to install the phone driver for the uknown device, however that keeps failing. I think its due to the phone permanently connecting and reconnecting to the pc.
So I'm wondering of what to do. I guess the biggest issue is that the drivers are not recognized, but as long as the phone keeps on restarting every couple of seconds i doubt i can properly install the driver. You guys got any ideas?

My guess is you haven't installed on Windows PC the appropriate Android USB Driver matching the device

I mean the appropriate USB driver had to be there for me to flash it with the TWRP in the first place, right?

Think I clearly said that the additionally required USB-driver has to be installed on Windows PC.

I have this one installed https://rootmydevice.com/download-neffos-usb-drivers/, is this the additionally required usb driver?

So far, despite what driver I pick for the device, it shows the code 10, device couldnt be started - probably because it never gets past the starting screen but keeps rebooting

slayingduck said:
Heya folks,
I have just attempted my first time flashing TWRP on my TP-Link Neffos X-1 following this guide: https://rootmygalaxy.net/twrp-root-...nd_Install_TWRP_Recovery_On_TP-Link_Neffos_X1.
Its looking kinda grim. It starts with the orange state Message and that the device will boot in 5 seconds, however after that it starts with an infinite bootloop. I also cannot access the Recovery (vol up + power), for it simply doesnt work anymore after the guide. When I plug it into my pc, it will automatically start with the bootloop (I can shut the phone off with vol down + power).
Attempting to get into fastboot mode over ADB (adb reboot bootloader), returns with the message error: device '(null)' not found. I think that is due to it not being recognized in the device manager(it doesnt show my phone anymore but unknown device). I tried to install the phone driver for the uknown device, however that keeps failing. I think its due to the phone permanently connecting and reconnecting to the pc.
So I'm wondering of what to do. I guess the biggest issue is that the drivers are not recognized, but as long as the phone keeps on restarting every couple of seconds i doubt i can properly install the driver. You guys got any ideas?
Click to expand...
Click to collapse
Try this TWRP file: TWRP_3.2.3_NeffosX1_TP902A_by_kiruha_21.img

The thing is, I cannot flash anything due to my phone constantly rebooting while inserted in the pc usb-slot. Neither ADB nor my device manager recognize the device and as mentioned before, I cannot install any drivers

slayingduck said:
The thing is, I cannot flash anything due to my phone constantly rebooting while inserted in the pc usb-slot. Neither ADB nor my device manager recognize the device and as mentioned before, I cannot install any drivers
Click to expand...
Click to collapse
Some MTK devices has this: Press both VOL+ & Power buttons. Only remove 2 buttons when you see Bootloader mode (recovery; fastboot; reboot system) or directly in the Recovery mode. Now you can use fastboot.
With the SPFT you can use same tip above. In the SPFT choose DOWNLOAD and plug USB device. Process to flash stock ROM or stock recovery.img & boot.img start.
If not start pugging USB: choose DOWNLOAD - press VOL- and plug USV device. You can try with buttons like only VOL- or VOL+ or combo buttons VOL+&VOL- or VOL-&VOL+ or other button combination.
You can try FIRMWARE UPGRADE too.
That's depend about LOCKED or Unlocked bootloader process that you made before actions!
If you unlocked bootloader so only need patience. If not so that's no good.