Database Info

Xperia L clockworkmod recovery ?

I can't seems to find xperia L clockworkmod recovery. Any idea where can i get it ?

ongwenhongjames said:
I can't seems to find xperia L clockworkmod recovery. Any idea where can i get it ?
Click to expand...
Click to collapse
Wrong section...Ask in Q&A....:good:

ongwenhongjames said:
I can't seems to find xperia L clockworkmod recovery. Any idea where can i get it ?
Click to expand...
Click to collapse
There is a vengeance kernel which have both CWM and TWRP recovery...flash it and you got it..
Sent from my C2105 using xda app-developers app

noob confusion
karkand said:
There is a vengeance kernel which have both CWM and TWRP recovery
Click to expand...
Click to collapse
When you say "which have both CWM & TWRP " I dont get the ides - WHen you flash only the kernel, how is CWM/TWRP showing up ? They are supposed to be residing in the Recovery partition, right ? We flash kernel into the System parition, isnt it ?
Suppose if "hotboot" the kernel without flashing it. Will I have access to CWM ?

jayaura said:
When you say "which have both CWM & TWRP " I dont get the ides - WHen you flash only the kernel, how is CWM/TWRP showing up ? They are supposed to be residing in the Recovery partition, right ? We flash kernel into the System parition, isnt it ?
Suppose if "hotboot" the kernel without flashing it. Will I have access to CWM ?
Click to expand...
Click to collapse
see for complete guide here http://forum.xda-developers.com/showthread.php?t=2322726
and how to get to CWM just reboot,,and at Sony logo,,it will be an Amber light on led then press vol button repeatly..just it..

CWM for lock bootloader xL
Anyone here can help me to have CWM for lock bootloader?

赤い蝶 said:
Anyone here can help me to have CWM for lock bootloader?
Click to expand...
Click to collapse
It is impossible. You have to unlock bootloader
Sent from my C2105 using xda premium

allenwalker1998 said:
It is impossible. You have to unlock bootloader
Sent from my C2105 using xda premium
Click to expand...
Click to collapse
It is possible dude (if you remember xparts) but cant find that for xperia l. Xparts shows device not supported. I wish nAl will work upon it because as by my knowledge, the first recovery for locked bootloader was put by him only

shivamcheat said:
It is possible dude (if you remember xparts) but cant find that for xperia l. Xparts shows device not supported. I wish nAl will work upon it because as by my knowledge, the first recovery for locked bootloader was put by him only
Click to expand...
Click to collapse
Yes. It's possible to load a recovery during boot. We just have to patch a script/binary which gets executed during boot. For example /system/bin/charger or /system/etc/install-recovery.sh
But there are two problems with stock kernel :-
1. In 3.4 kernel for FWVGA devices, video driver (msm_fb.c), needs to be patched for fixing frame buffers. Otherwise graphics show up messed in recoveries.
2. There's also an issue of reserved fields which block cwm start-up. Though twrp boots fine but with graphic glitches due to 1.
So best I can do is to make twrp for locked BL. Though it'll be almost unusable due to graphic glitches.
I hope, you understand my problem here.
Sent from my C2104 using xda app-developers app

Rachit Rawat said:
Yes. It's possible to load a recovery during boot. We just have to patch a script/binary which gets executed during boot. For example /system/bin/charger or /system/etc/install-recovery.sh
But there are two problems with stock kernel :-
1. In 3.4 kernel for FWVGA devices, video driver (msm_fb.c), needs to be patched for fixing frame buffers. Otherwise graphics show up messed in recoveries.
2. There's also an issue of reserved fields which block cwm start-up. Though twrp boots fine but with graphic glitches due to 1.
So best I can do is to make twrp for locked BL. Though it'll be almost unusable due to graphic glitches.
I hope, you understand my problem here.
Sent from my C2104 using xda app-developers app
Click to expand...
Click to collapse
Cant you port from xperia z's recovery ?
I tried to install the twrp provided for Z on locked bootloader but not worked for our device. When I take a look on installation script, it pushes charger files to system/bin but our charger file is located on root folder. I dont have recovey so didn't tried to push Z's files on our device at correct location as i'm afraid of bootloop.
If porting of Z's recovery can't be done, please make twrp for our devices ignoring the graphic issues. atleast we will have the recovery.
and i would like to make you know if you don't that or device has CWM pre installed but with restrictions. so may be looking more into system files may make CWM possible
Thanks for taking me in consideration.
Best regards..

something is wrong
karkand said:
see for complete guide here http://forum.xda-developers.com/showthread.php?t=2322726
and how to get to CWM just reboot,,and at Sony logo,,it will be an Amber light on led then press vol button repeatly..just it..
Click to expand...
Click to collapse
i try to flash with flashtool boot.img from taoshan which says is with recovery and twrm, but unfortunately i got this error
3:11 - INFO - Device connected in fastboot mode
13/003/2013 23:03:21 - INFO - Please wait device is rebooting into fastboot mode (via Fastboot)
13/003/2013 23:03:21 - INFO - Device will soon reboot back into fastboot mode
13/003/2013 23:03:21 - INFO - Device disconnected
13/003/2013 23:03:23 - INFO - Device connected in fastboot mode
13/003/2013 23:03:31 - INFO - Selected kernel (boot.img or kernel.sin): C:\Users\Nicholas\Downloads\Extended_Stock_Kernel _TaoShan_v2\boot.img
13/003/2013 23:03:31 - INFO - Flashing selected kernel
13/003/2013 23:03:31 - INFO - sending 'boot' (9212 KB)...
13/003/2013 23:03:31 - INFO - OKAY [ 0.302s]
13/003/2013 23:03:31 - INFO - writing 'boot'...
13/003/2013 23:03:31 - INFO - FAILED (remote: Command not allowed)
can i know what i am doing wrong, or what i can do to succeed in flashing this kernel?

@hellspawn
Hi! You need to unlock your bootloader See it in the service menu, that it is allowed or not. If not, like me, you're not lucky -yet, if it says allowed, then there is a tutorial in the forum how to do this!

can somebody tell me where to download CWM recovery for Xperia l? I'm currently running 4.2.2 stock and want to install cm11.i tried with CWM version 6.0.3.x,it have graphics glitch in recovery mode.i still tired to flash rom but aborted with status 7 error.my phone is rooted and bootloader unlocked.thanks

there does exist Cwm for locked bootloader and it works too. Not very good but enough to flash zips.
Head over to developement thread and you will find it.

abhi007.john said:
there does exist Cwm for locked bootloader and it works too. Not very good but enough to flash zips.
Head over to developement thread and you will find it.
Click to expand...
Click to collapse
I've been searching all day.can't find the thread and download link.i do have a cwm recovery version 6.0.x.x by Tz i don't remember the numbers but it's not working..please post a mirror download link

[Q] Sony Xperia J IMEI Blank with sim no signal

I have a problem with my Sony Xperia J ST26i. It's rooted and unlocked.
Now I can start my mobile but he has no signal. Phone says there is no SIM card. If have my SIM card inserted. I have only wifi signal.
When I dial *#06# on my phone I see the display as shown in the attachment.
And with MTK Droid Tool I can't change/restore my IMEI. See also the screenshot of MTK. It says --- Unknown ROM structure, backup NOT possible!
Is there a another way to restore my IMEI? Also I have no .nv_data file. It's not on my phone. Have anyone this file for My phone or another solution?
Hardware : QCT
Model : ST26i
Build number : 11.2.A.0.31
Build date UTC : 20130419-050845
Android v : 4.1.2
Baseband v: -----
Kernel v : 3.4.0 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 Fri Feb 1 13:04:19 CST 2013
Uboot build v : -----
LCD Driver IC : -----

Sometimes, there are few bugs in stock fw. Like me, i cant turn on wifi. So either u restore using PCC or flash custom rom might help.
Sent from my Xperia Miro using xda premium

kreatonn said:
Sometimes, there are few bugs in stock fw. Like me, i cant turn on wifi. So either u restore using PCC or flash custom rom might help.
Sent from my Xperia Miro using xda premium
Click to expand...
Click to collapse
Thanks for the reply.
PCC restore is not an option. I haven't make one. So I go look on the internet for a custom ROM flash.

If wont work after you flash rom again... just relock and then unlock phone bootloader again!

2010matej said:
If wont work after you flash rom again... just relock and then unlock phone bootloader again!
Click to expand...
Click to collapse
My phone is working again! I went to a phone store in Scheveningen and they have put a rom on my phone back they do work. It's the original stock rom. It cost me €15 bud it's working again. In the future, I'll backup first and the go play with my phone.
Thanks for the support! :good:

Stoetel said:
My phone is working again! I went to a phone store in Scheveningen and they have put a rom on my phone back they do work. It's the original stock rom. It cost me €15 bud it's working again. In the future, I'll backup first and the go play with my phone.
Thanks for the support! :good:
Click to expand...
Click to collapse
15€ for this? OMG man! YOu can do that alone for free,just use flashtool !

Hi. I have a similar problem.
Phone (xperia J) is working fine with stock rom, rooted and unlocked bootloader. But when i flash custom rom there is no IMEI, no signal and no efs folder (nv_data file). And if I go back to stock rom the IMEI is back and mobile network works.
So my question is is there any way to transfer IMEI, recreate efs folder, so I can use custom roms?

I have to post 10 times before I can post links outside this forum.

Stoetel said:
I have to post 10 times before I can post links outside this forum.
Click to expand...
Click to collapse
And I have to wait five minutes.
Well just posting...

Stoetel said:
And I have to wait five minutes.
Well just posting...
Click to expand...
Click to collapse
Just keep calm. The solution is near.

Stoetel said:
Just keep calm. The solution is near.
Click to expand...
Click to collapse
Another post...

Stoetel said:
Another post...
Click to expand...
Click to collapse
Three to go...

Stoetel said:
Three to go...
Click to expand...
Click to collapse
Almost.
Scroll down ....

Stoetel said:
Almost.
Scroll down ....
Click to expand...
Click to collapse
After this post the solution!

mtommy88 said:
Hi. I have a similar problem.
Phone (xperia J) is working fine with stock rom, rooted and unlocked bootloader. But when i flash custom rom there is no IMEI, no signal and no efs folder (nv_data file). And if I go back to stock rom the IMEI is back and mobile network works.
So my question is is there any way to transfer IMEI, recreate efs folder, so I can use custom roms?
Click to expand...
Click to collapse
Use it at your own risk. Read this text first before you get started.
If you follow these steps your phone is back to the original settings. You have your signal back and you IMEI.
Now you want your phone rooted! Right? Right!
For rooting Sony Xperia J 11.0.A.7.5 version, 11.2.A.0.21, 11.2.A.0.31 (and or later) using ClockworkMod (CWM) recovery necessitating an unlocked bootloader (unlocked bootloader).
Broadly speaking, the rooting procedure using CWM recovery to install su, busybox and Superuser.apk files bundled in the update. The steps are: flash CWM, rooting package update using CWM recovery, then flash the stock kernel back.
Preparation:
1. Fastboot files here
2. Unlock Boatloader.
3. CWM Sony Xperia J (boot.img)
4. Sony Xperia J stock kernel 11.0.A.7.5 (kernel.sin), can be extracted from the image ftf.
5. Update file for rooting (root_xperia_signed.zip
Update March 8, 2013:
All the required files in the download is packaged in the following:
- Version 11.0.A.7.5
- Version 11.2.A.0.21
- Version 11.2.A.0.31 (May 30, 2013)
The steps:
1. Root_xperia_signed.zip copy files to the internal / external sdcard.
2. Prepare boot.img, kernel.sin, fastboot.exe into the working folder. (Make self a folder on you PC Harddisk)
3. Prepare boot.img, kernel.sin, fastboot.exe into the working folder.
Turn off the phone, unplug the USB cable and go into fastboot mode by pressing and holding down the Vol + Up while plugging in the USB cable, fastboot mode can be seen from the blue LED light on the top panel.
4. Check whether the connection is correct fastboot, type in Command Prompt:
fastboot getvar version​
If prompt <waiting for device> is displayed, then the connection is not successful, try to check whether the driver for fastboot already installed.
5. Flash CWM and restart the phone:
fastboot flash boot boot.img
fastboot reboot​
6. When the phone restarts, observe the LED on the bottom of the panel when it turns purple, immediately press and hold the Vol + Up button until the LED turns blue to get into CWM. USB cable can then be removed.
7. At CWM, select install zip from sdcard, then choose zip from sdcard / external sdcard and select the file in step 1 above. Continue reboot system now and turn off the phone (if necessary by removing the battery and repeat to enter fastboot mode).
8. Repeat steps 3 and 4.
9. Flash stock kernel:
fastboot flash boot kernel.sin
fastboot reboot​
10. Turn on the phone, check whether the application is installed SuperSU. Congratulations rooting successful.
Originaly posted 11th July by Hamzie Fickri
This text comes from this page.

Thanks, but that's not what i needed.
I already have stock rom rooted and working. Problem is if I install custom rom (FXP, PA), rom starts but no mobile signal and no IMEI. So I cannot use it.
Is there a way to like "copy/paste" IMEI from stock rom to custom rom?
edit: read somewhere on xda that this is a CM10 bug and CM10 based roms for xperia J.

disregard my last post (and previous post also)
fixed it!
what I did:
1. flash original stock ICS rom - 11.0.A.7.5.CE
2. reboot phone and then shutdown (not sure if this is necessary)
3. flash CWM img from http://forum.xda-developers.com/showthread.php?t=2034639
4. install custom rom (FXP233)
5. reboot
and now mobile signal works and IMEI is back.
hope it helps somebody and sorry for hijacking your thread Stoetel

mtommy88 said:
disregard my last post (and previous post also)
fixed it!
what I did:
1. flash original stock ICS rom - 11.0.A.7.5.CE
2. reboot phone and then shutdown (not sure if this is necessary)
3. flash CWM img from http://forum.xda-developers.com/showthread.php?t=2034639
4. install custom rom (FXP233)
5. reboot
and now mobile signal works and IMEI is back.
hope it helps somebody and sorry for hijacking your thread Stoetel
Click to expand...
Click to collapse
No problem!
The importent thing is, your mobile is working fine again! :good:
Thanks for the response.

Is there any solution about this problem on tipo?
Sent from my ST21i using xda app-developers app

tassosmer said:
Is there any solution about this problem on tipo?
Sent from my ST21i using xda app-developers app
Click to expand...
Click to collapse
Here you can find the latest Android 4.0.4 version for the Sony Xperia Tipo ST21
And here the CWM for Tipo.
Kernel can you extract from the ftf file. You can open th ftf file with Winzip or Winrar.
Flashtool. You can also use this program to check if your phone is bootlocked.
Go check this site if you need your phone to unlock the bootloader.
Follow the instructions above in the previous post. Or search on this forum for the solution.
Good luck.

Guide: Installing Kernels/Roms on Xperia L (Unlocked Bootloader only)

Hey there guys, this thread is noob friendly and is made especially for those of you who just got their first Sony phone and decided to flash a custom kernel or rom.
I am not responsible for anything that happens to your phone, use this tutorial at your own risk.
Things you'll need:
- Xperia L with Unlocked Bootloader(ofcourse haha) Look here on how to unlock your bootloader.
- Flashtool
Installing a kernel (This tutorial is for 4.2.2 only, that is 15.3.A.0.26+)
1. Download phantom kernel from here (both Phantom_modules.zip and the boot.img) Place the "Phantom_modules.zip" into your phone (sd card or internal storage) Or you can use any other kernel's boot.img
2. After installing flashtool, or if you already have it installed, open it and click on the Flash icon (the first icon from the left)
4. When it asks you to choose a bootmode, select fastboot mode and press ok.
5. After all this has done turn of your phone (Xperia L).
6. Get out your usb cable and plug it into your computer while holding the "volume up" button. (notice your phone will glow blue below, this means that it is in fastboot mode.)
7. On the pop up window where it says "By Doomlord", choose "select kernel to flash". Locate your boot.img file that you just downloaded a while ago and select it.(Notice if the boot.img file is not showing up in the file menu, on the right cornor make sure the file type is set as "*.img")
8. Be patient and wait till the kernel has been flashed, should take no longer than 10 seconds.
9. Now select "Reboot device into system" and wait for your phone to power on, now once it's powered on without any problems turn it off. Now turn on your phone and wait for a purple glow then hold down the "volume down"button. Now you'll be in CWM (clock work recovery mod) Once you're here select install from zip. Locate your "phantom_modules.zip"(or the zip file, of your kernel choice) and select yes. Wait for it to be flashed and then go back and, reboot sytem.
10. From here you can flash any kernel/rom via CWM, like Thunderzap or civic. Just boot into cwm, select install from zip and locate your kernel zip file and hit install.
Credits:
- Kernel Owners.
- Sony for their kernel source
Hit thanks if this helped you out.

I don't think that's needed to be Phantom Kernel, or any other in specific, since the kernel provide a recovery with the possibility to flash a zip, it's ok (correct if I'm wrong).
I had unlocked my bootloader, then flashed the boot.img inside of the flashable zip from ThunderZap, then, rebooted to recovery right way, and flashed the entire package from ThunderZap.
Regards and thanks for the helpfull post!

Noled said:
I don't think that's needed to be Phantom Kernel, or any other in specific, since the kernel provide a recovery with the possibility to flash a zip, it's ok (correct if I'm wrong).
I had unlocked my bootloader, then flashed the boot.img inside of the flashable zip from ThunderZap, then, rebooted to recovery right way, and flashed the entire package from ThunderZap.
Regards and thanks for the helpfull post!
Click to expand...
Click to collapse
No probs
Well it was the first kernel for 4.2.2 and that's why I put it up instead. I know we can use the boot.img from thunderzap too but if I'm not specific enough most of the noobs wont understand. I also chose that kernel because it comes with a recovery so then you can just flash other kernels via cwm.

Complicated - with properly installed drivers you can start flashtool with usb-cable plugged in. After clicking the flash icon choose "Reboot into fastboot mode (via ADB)".
When the phone is in fastboot mode (blue led) choose "Select kernel to flash". No need to turn off the phone and play with cable and vol-down button...
...

R.A.B said:
Complicated - with properly installed drivers you can start flashtool with usb-cable plugged in. After clicking the flash icon choose "Reboot into fastboot mode (via ADB)".
When the phone is in fastboot mode (blue led) choose "Select kernel to flash". No need to turn off the phone and play with cable and vol-down button...
...
Click to expand...
Click to collapse
This tutorial seems pretty fine to me, so it doesn't matter
Sent from my C2104 using xda app-developers app

my flashtool exe is not detecting the .img file why?

delacruzivancarlo25 said:
my flashtool exe is not detecting the .img file why?
Click to expand...
Click to collapse
You can changed the *sin file to *img file

faizalotai said:
You can changed the *sin file to *img file
Click to expand...
Click to collapse
thanks

Sorry for noob question, but in step 9, can I skip the flashing "phantom_modules.zip" part and keep the stock kernel?
-----
Ignore this. I thought it was CWM only. I should have researched more before installing this. But I installed it and it is working good.

Xperia L 4.2.2 c105 15.3.A.1.14
Does this work with build. Umber 15.3.A.1.14 ???

MikeL. said:
Does this work with build. Umber 15.3.A.1.14 ???
Click to expand...
Click to collapse
Yes!

Thank you very much for this useful guide.
But I' ve two things to say:
1_If I didn't flash the phantom kernel can I flash a custom ROM.
2_Please the link for boot.IMG is not working they don't find the file could give me a working link.
And thank you very very much.

n78 shadow said:
Thank you very much for this useful guide.
But I' ve two things to say:
1_If I didn't flash the phantom kernel can I flash a custom ROM.
2_Please the link for boot.IMG is not working they don't find the file could give me a working link.
And thank you very very much.
Click to expand...
Click to collapse
try this to get a working recovery
http://forum.xda-developers.com/showthread.php?p=60943487
Sent from my C2105 using XDA Free mobile app

I have unlocked my bootloader via fastboot and its OKAY....also I installed custom recovery using fastboot, but I got bootlooop and I can even boot in recovery, please help me?????

richard el renthlei said:
I have unlocked my bootloader via fastboot and its OKAY....also I installed custom recovery using fastboot, but I got bootlooop and I can even boot in recovery, please help me?????
Click to expand...
Click to collapse
Return to stock and try again. There's a guide to flash stock rom here somewhere. You can search for it.
Sent from my C2104 using XDA Free mobile app

Joel16 said:
Return to stock and try again. There's a guide to flash stock rom here somewhere. You can search for it.
Sent from my C2104 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah ur right, why do i need all the way to go back to stock to flash custom recovery? I had wifi problem in every rom i flash?

richard el renthlei said:
Yeah ur right, why do i need all the way to go back to stock to flash custom recovery? I had wifi problem in every rom i flash?
Click to expand...
Click to collapse
Flash any (4.2.2) stock rom and try again. That's why your WiFi probably isn't working. Either that or you didn't flash the kernel zip file (ex thunderzap4.1.zip) after fast booting the kernel img.
Sent from my C2104 using XDA Free mobile app

WiFi now working
I am also facing the same issue where wifi is not working on any Rom. So after following the steps mentioned earlier. What exactly should be done like boot to recovery then flash gapps and then reboot. Once booted flash boot.img from the Rom and then boot to recovery to flash the full kernal zip package..?

ramkumar2000 said:
I am also facing the same issue where wifi is not working on any Rom. So after following the steps mentioned earlier. What exactly should be done like boot to recovery then flash gapps and then reboot. Once booted flash boot.img from the Rom and then boot to recovery to flash the full kernal zip package..?
Click to expand...
Click to collapse
See joels answer for details look at the post you opened
Sent from my Xperia T using XDA Free mobile app

I have a HUGE problem. Please help me ASAP!
I just flashed my Xperia L to CM 12.1. I was already on CM 12 before. So I went into recovery, wiped everything and installed the new ROM from zip. Everything worked fine except for the network signal. I was getting no network signal at all. So, when I rebooted the phone, I saw that the ThunderZap kernel was also removed. I tried to flash the kernel using flashtool, but this particular variant has 2 .img files (bootlp and bootkk). I flashed them both using the FlashtTool. Now, when I reboot my phone, all I see is the ThunderZap logo. Please help me ASAP, as this is my only primary driver phone.

(Root) pre rooted flashable zip file 18.3.C.0.39 for D2303

Hey there,
i have created a flashable zip file for the xperia M2 D2303 with this tool: http://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904
You can flash this file in CWM Recovery like this: http://forum.xda-developers.com/showthread.php?t=2746407
After flashing you have the newest firmware for this device with root rights!
Good luck and happy flashing!
Instructions:
1. Unlock your bootloader if not already done
2. Download CWM Recovery from link above
3. Flash the CWM with flashtool in fastboot mode
4. Reboot in CWM
5. Wipe data/factory reset, wipe cache, wipe dalvik
Note: If you want not loose your apps and settings only wipe cache and dalvik in CWM before flashing the zip file.
6. flash the zip file from link below
7. reboot system
8. done
If the system after the flash is not writable, please visit this thread:http://forum.xda-developers.com/xperia-m2/development/tut-fix-mount-kitkat-root-t2861661
requirements:
Sony Xperia M2 D2303
Unlocked bootloader
CWM Recovery from link above
Flashtool
Note: Please backup your system in CWM befor flashing!
Credits:zxz0O0 for PRFcreator, DooMloRD for CWM, Naufal Sidik for fix mount system
--------------------------------------------------------------------------------------------------------------------------------------------------
Download: https://mega.co.nz/#!C9gGyBRY!flV_DeYVVLxBrm69qr_PrAUVp7TasoykszvA-5r7Gq0

What's the difference between this version and 18.3.C.0.37 except root? Also how to flash cwm?

Now we just need a method to bring CWM or TRWP to the D2303. Or is it included in the above, and I can flash it via kernel + Flashtool?

I will update the op as soon as posible.
Sent from my D2303 using XDA Premium 4 mobile app

If the kernel contains CWM, I could extract the kernel.elf from the .zip, then flash it via fastboot. Correct?
Which region is the ROM from?

peter-k said:
If the kernel contains CWM, I could extract the kernel.elf from the .zip, then flash it via fastboot. Correct?
Which region is the ROM from?
Click to expand...
Click to collapse
The kernel in this zip file not includes CWM! You need the CWM from DooMloRD.
Flash this file via fastboot, then reboot in recovery.
This is the customized MY 1281-1590 version of this firmware.

dotzi75 said:
The kernel in this zip file not includes CWM! You need the CWM from DooMloRD.
Flash this file via fastboot, then reboot in recovery.
This is the customized MY 1281-1590 version of this firmware.
Click to expand...
Click to collapse
Great. I am going ahead.
Not - Doomlords Recovery link doesn't work ... at least not here in China.

qtoo941 said:
What's the difference between this version and 18.3.C.0.37 except root? Also how to flash cwm?
Click to expand...
Click to collapse
The differences are minimal, minor bugfixes. On my device it works fine.
For flash the CWM, read the op.

when will their be a custom kernel for us locked bootloaders with cwm on it .as would like to see it on the m2 locked bootloaders .

If the fix mount system tut here does not work for you, which may not, here is a simple fix just for removing the unneeded system apk's after flashing dotzi's 18.3.C.0.39:
- create a file named "enable" with a file editor with the value 0 in it
- save the file without .txt extension, or remove the extension after the file is saved
- copy the file "enable" to sys/kernel/security/sony_ric (ignore any failed operation message)
- set permissions to rw-r-r-
Gives full access to all system files for the current session.
---------- Post added at 12:33 PM ---------- Previous post was at 12:24 PM ----------
This customized ROM works fine for me. Thanks to the OP!
Perfect would be CWM integrated into kernel, dito for the mount-sript (and init support) into ROM. That's all we need No de-odexing or other pointless stuff.

This customized ROM works fine for me. Thanks to the OP!
Perfect would be CWM integrated into kernel, dito for the mount-sript (and init support) into ROM. That's all we need No de-odexing or other pointless stuff.
Click to expand...
Click to collapse
Nice to hear that it works. To integrate CWM will only be possible if a working Recovery is available for the D2303. I just tried it in the kernel building, but I failed miserably. But I will try as soon as possible to integrate the mount-script and the init.d support.
Let us hope that even more people to deal with it and the development is of overriding driven.

dotzi75 said:
Nice to hear that it works. To integrate CWM will only be possible if a working Recovery is available for the D2303. I just tried it in the kernel building, but I failed miserably. But I will try as soon as possible to integrate the mount-script and the init.d support.
Let us hope that even more people to deal with it and the development is of overriding driven.
Click to expand...
Click to collapse
Consider putting the doomlord kernel which contains the CWM onto another storage (if he allows). Downloading from the current location is really not fun.
I'll be subscribing here as it seems you want to bring it further.:good:

Wow, nice one
Thanks for your hard work, really appreciate it
(Currently waiting for the dual-SIM one xD)

How do you were able to install CWM ? Your link is linket do DooMLoRD's CWM für JB for the D2305.
I'm gedtting a bootloop by installing it.

so far this is working i flashed cwmon my D2303 and im waiting for it to boot up now lol on the wave screen
Edit: WORKS amazing thank you so much rooted on 4.4.2 i love you (no homo)

hero66 said:
How do you were able to install CWM ? Your link is linket do DooMLoRD's CWM für JB for the D2305.
I'm gedtting a bootloop by installing it.
Click to expand...
Click to collapse
It doesn't matter. Flash the cwm via fastboot, and boot only in recovery by pressing vol down. Then Flash the zip file and reboot! It works, believe me!
Sent from my D2303 using XDA Premium 4 mobile app

hero66 said:
How do you were able to install CWM ? Your link is linket do DooMLoRD's CWM für JB for the D2305.
I'm gedtting a bootloop by installing it.
Click to expand...
Click to collapse
Enter CWM, don't allow fully loading bootloader.
---------- Post added at 10:21 AM ---------- Previous post was at 10:17 AM ----------
For mounting system permanent use the latest version Busybox Installer, previous version will not work. Then use Init.d Toggle (both Play store).

Thanks, finaly my M2 KK is rooted.

Any chance for something to d2306? Or can we crossflash the d2303 one?
Sent from my D2306 using XDA Free mobile app

macabrocabral said:
Any chance for something to d2306? Or can we crossflash the d2303 one?
Sent from my D2306 using XDA Free mobile app
Click to expand...
Click to collapse
I will take a look at this next few days if i have time. I'm busy in my Job now. Keep calm, development is just in the beginning! Don't crossflash, i don't know if its work!
Sent from my D2303 using XDA Premium 4 mobile app

[ROM][UNOFFICIAL] Nougat custom rom for Huawei Y6 PRO [TIT-AL00]

This is really tricky method, as there are no clear guide in english, so i have collected information from different sites and compiled this guide.
Warning, after phone will do optimization every time you restart it.
Imp .. Bootloader needs to be unlocked in order to install this ROM (How to unlock bootloader?) Mod Edit: Link removed
Once bootloader unlocked, download and install TWRP & Root files from This Link Mod Edit: Link removed
Make sure USB debugging enabled and have made a full backup of the mobile
once TWRP is installed download the custom firmware from This Link http://corneey.com/wwX0JD
and Copy the rom to SDCARD and install it from TWRP recovery Mode and dont forget to install GAPPS after installing the ROM

not working all recovery

can you post the screen shot and model num of the phone please

omid.kurd said:
not working all recovery
Click to expand...
Click to collapse
Did you unlock the bootloader ? if you did not then you cant root the mobile and install this rom

now fixed just one of twrp working

@abidullah
Hi, Unfortunately I flashed boot_enjoy5_5s.img to boot partition and my phone get boot loop and can not go to recovery mode.
I try volume up/down and power that does not work.
and adb and fastboot does not recognize my phone.
do you know any way that I can boot in recovery mode.
thanks

ahmad829 said:
Hi, Unfortunately I flashed boot_enjoy5_5s.img to boot partition and my phone get boot loop and can not go to recovery mode.
I try volume up/down and power that does not work.
and adb and fastboot does not recognize my phone.
do you know any way that I can boot in recovery mode.
thanks
Click to expand...
Click to collapse
Finally worked!
After many retry, I can boot in recovery and flash ROM.
if anybody have similar problem just remove sim card and memory and try boot to recovery mode by press volume up and power.

Screenshots?
Is it AOSP or EMUI based?

MuhammadBilal said:
Screenshots?
Is it AOSP or EMUI based?
Click to expand...
Click to collapse
check this http://www.resurrectionremix.com/

Does this ROM work straightforward without any bugs?
If so I will flash it on my Huawei TIT-AL00. Thanks in advance.

will it work on my tit-u02?
I cant find any roms for this model and sick of it! lmao
so can I try to flash this rom? is it tested already? will my device brick?(hopefully not)

Boybato said:
I cant find any roms for this model and sick of it! lmao
so can I try to flash this rom? is it tested already? will my device brick?(hopefully not)
Click to expand...
Click to collapse
I flash this rom on my phone (Y6 Pro AL-00) and it work perfectly.
and about brick? if you do flash correctly there is no problem.
good luck

ahmad829 said:
I flash this rom on my phone (Y6 Pro AL-00) and it work perfectly.
and about brick? if you do flash correctly there is no problem.
good luck
Click to expand...
Click to collapse
but my phone is TIT-U02? and it said for TIT-AL00 only huhu

Thnx man

Does Otg support on this ROM?

Vinodsasanka said:
Does Otg support on this ROM?
Click to expand...
Click to collapse
I dont tink so

@abidullah
Sir does it work with TIT-U02?

Vinodsasanka said:
Does Otg support on this ROM?
Click to expand...
Click to collapse
no
---------- Post added at 11:33 PM ---------- Previous post was at 11:24 PM ----------
JavenX said:
Does this ROM work straightforward without any bugs?
If so I will flash it on my Huawei TIT-AL00. Thanks in advance.
Click to expand...
Click to collapse
Bug : no OTG support

Better then Emui/original rom...
abidullah said:
This is really tricky method, as there are no clear guide in english, so i have collected information from different sites and compiled this guide.
Warning, after phone will do optimization every time you restart it.
Imp .. Bootloader needs to be unlocked in order to install this ROM (How to unlock bootloader?)
Once bootloader unlocked, download and install TWRP & Root files
Make sure USB debugging enabled and have made a full backup of the mobile
once TWRP is installed download the custom firmware
and Copy the rom to SDCARD and install it from TWRP recovery Mode and dont forget to install GAPPS after installing the ROM
Click to expand...
Click to collapse
Thanks dude this rom is amazing i'am impressed by your work .:good:
Cons/bugs:
1) No otg support ( otg is not important for me)
Pros:
1)Ram availability is upto 1300 (in original rom i got 700 to 800).
2) More internal space: After installation this rom takes 1gb of space only.
3) It has OpenGl es 3.1 good for graphics/gaming.
4) SE linux can be changed between permissive and enforcin .(i used app for that)
i guess thats all i found so far but this rom is great fo my device (Huawei y6 pro Tit-al00)
again thanks Abidulla and thankyou Xda.

Don't I have to wipe cache, wipe data, format mount in the process of installing this Rom?