This is really tricky method, as there are no clear guide in english, so i have collected information from different sites and compiled this guide.
Warning, after phone will do optimization every time you restart it.
Imp .. Bootloader needs to be unlocked in order to install this ROM (How to unlock bootloader?) Mod Edit: Link removed
Once bootloader unlocked, download and install TWRP & Root files from This Link Mod Edit: Link removed
Make sure USB debugging enabled and have made a full backup of the mobile
once TWRP is installed download the custom firmware from This Link http://corneey.com/wwX0JD
and Copy the rom to SDCARD and install it from TWRP recovery Mode and dont forget to install GAPPS after installing the ROM
not working all recovery
can you post the screen shot and model num of the phone please
omid.kurd said:
not working all recovery
Click to expand...
Click to collapse
Did you unlock the bootloader ? if you did not then you cant root the mobile and install this rom
now fixed just one of twrp working
@abidullah
Hi, Unfortunately I flashed boot_enjoy5_5s.img to boot partition and my phone get boot loop and can not go to recovery mode.
I try volume up/down and power that does not work.
and adb and fastboot does not recognize my phone.
do you know any way that I can boot in recovery mode.
thanks
ahmad829 said:
Hi, Unfortunately I flashed boot_enjoy5_5s.img to boot partition and my phone get boot loop and can not go to recovery mode.
I try volume up/down and power that does not work.
and adb and fastboot does not recognize my phone.
do you know any way that I can boot in recovery mode.
thanks
Click to expand...
Click to collapse
Finally worked!
After many retry, I can boot in recovery and flash ROM.
if anybody have similar problem just remove sim card and memory and try boot to recovery mode by press volume up and power.
Screenshots?
Is it AOSP or EMUI based?
MuhammadBilal said:
Screenshots?
Is it AOSP or EMUI based?
Click to expand...
Click to collapse
check this http://www.resurrectionremix.com/
Does this ROM work straightforward without any bugs?
If so I will flash it on my Huawei TIT-AL00. Thanks in advance.
will it work on my tit-u02?
I cant find any roms for this model and sick of it! lmao
so can I try to flash this rom? is it tested already? will my device brick?(hopefully not)
Boybato said:
I cant find any roms for this model and sick of it! lmao
so can I try to flash this rom? is it tested already? will my device brick?(hopefully not)
Click to expand...
Click to collapse
I flash this rom on my phone (Y6 Pro AL-00) and it work perfectly.
and about brick? if you do flash correctly there is no problem.
good luck
ahmad829 said:
I flash this rom on my phone (Y6 Pro AL-00) and it work perfectly.
and about brick? if you do flash correctly there is no problem.
good luck
Click to expand...
Click to collapse
but my phone is TIT-U02? and it said for TIT-AL00 only huhu
Thnx man
Does Otg support on this ROM?
Vinodsasanka said:
Does Otg support on this ROM?
Click to expand...
Click to collapse
I dont tink so
@abidullah
Sir does it work with TIT-U02?
Vinodsasanka said:
Does Otg support on this ROM?
Click to expand...
Click to collapse
no
---------- Post added at 11:33 PM ---------- Previous post was at 11:24 PM ----------
JavenX said:
Does this ROM work straightforward without any bugs?
If so I will flash it on my Huawei TIT-AL00. Thanks in advance.
Click to expand...
Click to collapse
Bug : no OTG support
Better then Emui/original rom...
abidullah said:
This is really tricky method, as there are no clear guide in english, so i have collected information from different sites and compiled this guide.
Warning, after phone will do optimization every time you restart it.
Imp .. Bootloader needs to be unlocked in order to install this ROM (How to unlock bootloader?)
Once bootloader unlocked, download and install TWRP & Root files
Make sure USB debugging enabled and have made a full backup of the mobile
once TWRP is installed download the custom firmware
and Copy the rom to SDCARD and install it from TWRP recovery Mode and dont forget to install GAPPS after installing the ROM
Click to expand...
Click to collapse
Thanks dude this rom is amazing i'am impressed by your work .:good:
Cons/bugs:
1) No otg support ( otg is not important for me)
Pros:
1)Ram availability is upto 1300 (in original rom i got 700 to 800).
2) More internal space: After installation this rom takes 1gb of space only.
3) It has OpenGl es 3.1 good for graphics/gaming.
4) SE linux can be changed between permissive and enforcin .(i used app for that)
i guess thats all i found so far but this rom is great fo my device (Huawei y6 pro Tit-al00)
again thanks Abidulla and thankyou Xda.
Don't I have to wipe cache, wipe data, format mount in the process of installing this Rom?
Related
I had the brilliant idea to format everything via TWRP...
TWRP is still there and I can transfer files on my phone but other than that I can do nothing else, I tried to flash 3 different roms, but none is flashing, always giving an 'error executing binary in zip /sd card' or something.
What can I do? Also tried sideloading with ADB but my computer is a ***** and never recognizes adb devices, in CMD at least.
Why don't you try rsd lite to flash stock rom? I think there are tutorials for that
Zakaria.R said:
Why don't you try rsd lite to flash stock rom? I think there are tutorials for that
Click to expand...
Click to collapse
Just downloaded and installed it.
It does not recognize my device, nothing shows up.
My computer is retarded like that. :/
coolkingler1 said:
Just downloaded and installed it.
It does not recognize my device, nothing shows up.
My computer is retarded like that. :/
Click to expand...
Click to collapse
I could recommend you to flash a cm recovery img through twrp to install a cm rom as I read in some threads (not for this device) that cm recovery helped install cm rom when twrp wouldn't, but then again if that fails you would lose twrp and end up with a crappy recovery, that's risky
Zakaria.R said:
I could recommend you to flash a cm recovery img through twrp to install a cm rom as I read in some threads (not for this device) that cm recovery helped install cm rom when twrp wouldn't, but then again if that fails you would lose twrp and end up with a crappy recovery, that's risky
Click to expand...
Click to collapse
I managed to fix my situation. My pc recognizes ADB devices again.
But not RSD Lite, that doesn't recognize my Xplay
coolkingler1 said:
I managed to fix my situation. My pc recognizes ADB devices again.
But not RSD Lite, that doesn't recognize my Xplay
Click to expand...
Click to collapse
You owe your pc some apologies haha, anyway hope you can manage to fix things up, good luck
Zakaria.R said:
You owe your pc some apologies haha, anyway hope you can manage to fix things up, good luck
Click to expand...
Click to collapse
Think i need to flash firmware first? Sideloading with CMD only got to 5% then stopped.
Tried a lot of things but I think it's simply 'bricked' if not hard then at least softbrick.
God, how am I going to explain this to my family, ruined a 330 euro device by tinkering.
coolkingler1 said:
Think i need to flash firmware first? Sideloading with CMD only got to 5% then stopped.
Click to expand...
Click to collapse
Hey buddy,
Look through these forums for a thread about TWRP flashable stock images for the X Play by dev>null. That thread SAVED me when I first got my X Play and was stuck in a bootloop.
You can push that file to your phone and then flash it with TWRP. Then you will have a stock 6.0 or 6.0.1 image with root on your phone. You can then go about reinstalling your apps and Xposed modules.
I hope this helps. Good luck, dude.
EDIT: Found the thread - http://forum.xda-developers.com/moto-x-play/general/rom-xt1563-brasil-stock-6-0-twrp-t3272979/page26
if adb recognises the device then flash the stock firmware though adb.
bablu048 said:
if adb recognises the device then flash the stock firmware though adb.
Click to expand...
Click to collapse
Doesn't work because adb only recognizes it sometimes. When I do start flashing stuff it goes <waiting for device>
EDIT: I can flash a rom maybe via fastboot but it says bootloader denies permission.
since you have twrp, why not flash (restore) those twrp specific roms?
pijes said:
since you have twrp, why not flash (restore) those twrp specific roms?
Click to expand...
Click to collapse
I didn't make one... only in titanium backup did I make a backup, for the rest I just didn't care.
The problem is that permission is denied when I try to flash via CMD/fastboot.
I got the stock EU rom, but it won't flash because permission is denied, also in TWRP it just says Failed
coolkingler1 said:
I didn't make one... only in titanium backup did I make a backup, for the rest I just didn't care.
The problem is that permission is denied when I try to flash via CMD/fastboot.
I got the stock EU rom, but it won't flash because permission is denied, also in TWRP it just says Failed
Click to expand...
Click to collapse
could you share with us some screenshots on your twrp restore attempt?
pijes said:
could you share with us some screenshots on your twrp restore attempt?
Click to expand...
Click to collapse
I can't ;( don't really have a camera to do that.
I can tell you that it looks like this with other roms:
https://www.google.nl/search?hl=nl&...mg..0.6.431.HJmBnci0L6A#imgrc=tt83t9W9pU7wmM:
and that it looks like this with the stock rom:
https://lh5.googleusercontent.com/-...09-h848-no/Screenshot_2013_12_13_13.17.49.png
Download a twrp backup from the forum put it on sdcard and restore. I think kernel won't be there in the twrp backup so install squid's
bablu048 said:
Download a twrp backup from the forum put it on sdcard and restore. I think kernel won't be there in the twrp backup so install squid's
Click to expand...
Click to collapse
I can install kernels, so squid should not be a prob.
Where can I find these backups?
coolkingler1 said:
I can install kernels, so squid should not be a prob.
Where can I find these backups?
Click to expand...
Click to collapse
Here http://forum.xda-developers.com/moto-x-play/general/rom-xt1563-brasil-stock-6-0-twrp-t3272979
---------- Post added at 04:18 AM ---------- Previous post was at 04:16 AM ----------
What OS are you running on PC ?? For RSD it must be windows 7/8 or lower , windows 10 isn't working
I linked to that thread on the previous page. No one cares about what I post!!!
bablu048 said:
Here http://forum.xda-developers.com/moto-x-play/general/rom-xt1563-brasil-stock-6-0-twrp-t3272979
---------- Post added at 04:18 AM ---------- Previous post was at 04:16 AM ----------
What OS are you running on PC ?? For RSD it must be windows 7 or lower , windows 10 isn't working
Click to expand...
Click to collapse
Windows 10 hehe. Will try out the backups.
EDIT: I can't, there is no EU version for the backups.
i have problem installing custom roms... can anybody help me?
Steps I follow:
1- With Stock ROM (bootloader and modem correct for custom rom) without custom recovery.
2- OEM unlock activated in developers settings
3- Flash TWRP recovery 3.0.2-4 with Odin 3.12.3
4- In TWRP recovery, swype for do modifications
5- Wipe - Format Data - Write "yes" (tried 4 or 5 times)
6- Reboot to recovery again (tried without this)
7- Flash no-verity-opt-encrypt-4.1 from OTB USB (internal storage tried too)... no errors
8- Reboot to recovery (tried without this)
9- Flash custom rom from OTG USB (internal storage tried too)
10- samsung logo and nothing...
I think the problem is with the encryption of the folder /data but it is assumed that the no-verity-opt-encrypt-4.1 file disables encryption.
i tried Superman rom and The Galaxy project, last versions.
have you tried rooting your phone using this guide
works only on exynos models.
lifeisgood210 said:
have you tried rooting your phone using this guide
works only on exynos models.
Click to expand...
Click to collapse
the problem is installing custom roms, root is possible. But thanks
I have the same problem with most all the roms that I have tried. Superman and Phoenix are not working but TheGalaxyProject is.
I think there is something Samsung has done with the latest firmware that makes it impossible to install custom roms. And nobody in this forum knows it yet
Nothing? I need help...
sakun-ice said:
Nothing? I need help...
Click to expand...
Click to collapse
Have you tried other custom recovery beside TWRP.......
AshTechsoft said:
Have you tried other custom recovery beside TWRP.......
Click to expand...
Click to collapse
The installation tutorial says that I have to have the latest version of twrp (3.0.2-4)
sakun-ice said:
The installation tutorial says that I have to have the latest version of twrp (3.0.2-4)
Click to expand...
Click to collapse
Don't worry try other recovery beside twrp nothing will happens
!!! BUT BEFORE ANY STEPS YOU HAVE TO MAKE BACKUP OF YOUR DEVICE!!!
AshTechsoft said:
Don't worry try other recovery beside twrp nothing will happens
!!! BUT BEFORE ANY STEPS YOU HAVE TO MAKE BACKUP OF YOUR DEVICE!!!
Click to expand...
Click to collapse
Thanks. I'll try tomorrow. I will tell my experience here.
There is no recovery other than TWRP. Another option?
sakun-ice said:
There is no recovery other than TWRP. Another option?
Click to expand...
Click to collapse
Try after flash oldest twrp for your s7 means twrp 3.0.0-0 by Odin
Then try to install custom roms.........
Send your openion.....
---------- Post added at 01:25 PM ---------- Previous post was at 01:24 PM ----------
sakun-ice said:
There is no recovery other than TWRP. Another option?
Click to expand...
Click to collapse
Try after flash oldest twrp for your s7 means twrp 3.0.0-0 by Odin
Then try to install custom roms.........
Here is link of twrp 3.0.0-0
https://dl.twrp.me/herolte/twrp-3.0.0-0-herolte.img.tar
Send your openion.....
solved!!
The problem is that I downloaded the rom and the file was corrupt. Something happens with my computer and my wifi adapter.
sakun-ice said:
solved!!
The problem is that I downloaded the rom and the file was corrupt. Something happens with my computer and my wifi adapter.
Click to expand...
Click to collapse
Yeah!!! I happy that your problem is solved......
TWRP has come to the SM-C7000!
In order to install this, follow these instructions:
Enable OEM Unlock in developer settings
Enter download mode (Press and hold home + volDown + Power when powered off)
Using Odin, click the 'AP' tab and select the recovery.tar file you've downloaded.
Flash the TWRP image, then hold home + volUp + Power
Congratulations, you are now booted into TWRP!
Remember, on the stock ROM, dm-verity is enabled. What does this mean? If you swipe to allow system modifications, you must flash something that disables dm-verity (such as magisk or a dm-verity disabler.)
Also, on the stock ROM, you MUST format /data before performing any actions, due to the fact that it is force-encrypted by default.
BUGS:
None, as far as I'm aware of.
https://drive.google.com/file/d/1fQRIR_fa7MaHTIT-4ta13477mo-Ir-Ey/view
XDA:DevDB Information
TWRP for c7ltechn, Tool/Utility for the Samsung Galaxy C7
Contributors
wzedlare and minz1
Source Code: https://github.com/TeamWin
Version Information
Status: Stable
Created 2017-10-07
Last Updated 2018-01-04
Thank you very much @wzedlare..
TWRP Recovery for Samsung Galaxy C7 (SM-C7000) was being waited by lots of C7 owners. We hope you fix all the issues and make it a flawless file. You can also collaborate with @javad0644 to make it even better.. He had developed a root file for C7 before..
Keep up this good work..
(Note: Except the first two pictures in the OP you have uploaded, the other pictures are broken. We can't see them. Can you please upload them again?)
lawyer_06 said:
Thank you very much @wzedlare..
TWRP Recovery for Samsung Galaxy C7 (SM-C7000) was being waiting by lots of C7 owners. We hope you fix all the issues and make it a flawless file. You can also collaborate with @javad0644 to make it even better.. He had developed a root file for C7 before..
Keep up this good work..
(Note: Except the first two pictures in the OP you have uploaded, the other pictures are broken. We can't see them. Can you please upload them again?)
Click to expand...
Click to collapse
Thanks.I have already been in contact with javad.There are only 2 pictures, there are no other pictures in the thread.
Build 14.10.2017:
Code:
* MTP issue is fixed.You can use MTP now.
Hello excelent work
thanks for work, Thank you very much, excellent work thanks to people like you, we can enjoy new things in our device, thank you very much, a hug and if I can in any way contribute to the creation of a personalized Rom, or send some money to q you think it would be exceptional of you
thank you very much bro , hope you create some bigger works like custom roms. ?
---------- Post added at 06:09 PM ---------- Previous post was at 05:29 PM ----------
hey guys help me i cant take a backup
it cant read the memory at all
Rkd2000 said:
thank you very much bro , hope you create some bigger works like custom roms.
---------- Post added at 06:09 PM ---------- Previous post was at 05:29 PM ----------
hey guys help me i cant take a backup
it cant read the memory at all
Click to expand...
Click to collapse
Because your data is encrypted.Please read the whole thread.
wzedlare said:
Because your data is encrypted.Please read the whole thread.
Click to expand...
Click to collapse
Can you explain for me how can i solve it please
Rkd2000 said:
Can you explain for me how can i solve it please
Click to expand...
Click to collapse
its can not be fix for now...
Costom rom
Thanks for this hard work
I haven't used this method yet
I'm really waiting for a stable costom rom based on lineage os ??
installed on my c7
i have installed on my c7000 hongkong firmware model. flashed with twrp with auto reboot off. restarted into twrp ,swipe to allow modification but it failed to mount storage. then i did factory reset in twrp and type yes. it removed all the data after that it asked me to install twrp and reboot. (it gives you options in twrp upon factory reset) did that and rebooted again in twrp . this time every thing is working good. mounted storage . after that put the supersu zip file on mobile via usb cable and installed through twrp install option then i installed (no-verity-opt-encrypt-3.1.zip) i dont know is it necessary or not but i installed it . rebooted now my mobile is rooted and twrp recovery is working fine.
only problem i got is that private mode is not working now. xD
thanks for making twrp to work :good:
koolguy0000 said:
i have installed on my c7000 hongkong firmware model. flashed with twrp with auto reboot off. restarted into twrp ,swipe to allow modification but it failed to mount storage. then i did factory reset in twrp and type yes. it removed all the data after that it asked me to install twrp and reboot. (it gives you options in twrp upon factory reset) did that and rebooted again in twrp . this time every thing is working good. mounted storage . after that put the supersu zip file on mobile via usb cable and installed through twrp install option then i installed (no-verity-opt-encrypt-3.1.zip) i dont know is it necessary or not but i installed it . rebooted now my mobile is rooted and twrp recovery is working fine.
only problem i got is that private mode is not working now. xD
thanks for making twrp to work :good:
Click to expand...
Click to collapse
So you can use your data even if you reboot to system? I tried verity zip but it didnt work for me(stock rom still encrypted my data).It is just weird, maybe supersu zip made it possible.
wzedlare said:
So you can use your data even if you reboot to system? I tried verity zip but it didnt work for me(stock rom still encrypted my data).It is just weird, maybe supersu zip made it possible.
Click to expand...
Click to collapse
i did the whole method in twrp . after wiping my data mounting storage started working. if you connect mobile to computer via usb (when you are in twrp recovery) the computer will show you your mobile drive so u can put zip files.
i can send you the files if u want them.
koolguy0000 said:
i did the whole method in twrp . after wiping my data mounting storage started working. if you connect mobile to computer via usb (when you are in twrp recovery) the computer will show you your mobile drive so u can put zip files.
i can send you the files if u want them.
Click to expand...
Click to collapse
I know about mtp(I tried it as I'm the dev.I just couldnt disable verity, please send your supersu and verity zips from pm and I will also try them in my spare time, thanks.
Any solution bro? i hope in you to fix it
Request For Galaxy C7 Pro TWRP Recovery
Dear Sir Kindly Upload TWRP Recovery For Samsung Galaxy C7 (SM-C7010).
Twrp for android 7 with default Hong Kong Rom
Hi,My phone's rom is for hong kong but i already installed android 7 China rom on my phone as u may knoe china roms doesn't contain google apps but i really need to install twrp custom recovery for installing gapps so Can i flash ur file on my phone?
Parsa1996 said:
Hi,My phone's rom is for hong kong but i already installed android 7 China rom on my phone as u may knoe china roms doesn't contain google apps but i really need to install twrp custom recovery for installing gapps so Can i flash ur file on my phone?
Click to expand...
Click to collapse
Hi no DO NOT use this TWRP on china rom
Google play
Parsa1996 said:
Hi,My phone's rom is for hong kong but i already installed android 7 China rom on my phone as u may knoe china roms doesn't contain google apps but i really need to install twrp custom recovery for installing gapps so Can i flash ur file on my phone?
Click to expand...
Click to collapse
hello if you are still trying to find a way to ut the play store in the china rom of android 7...here is a apk for installing google play http://itechify.com/2016/11/10/download-google-installer-apk-chinese-phones/
JohnnyMwanza said:
hello if you are still trying to find a way to ut the play store in the china rom of android 7...here is a apk for installing google play http://itechify.com/2016/11/10/download-google-installer-apk-chinese-phones/
Click to expand...
Click to collapse
Hi DO NOT use THIS app DIDNT WORKS
Hello, I need help to recover my S8 PRO, it does not start,:crying::crying: and I have try flashed with flash tool and with "smartphone multi port download tool" and it gives me these errors, if someone can help me. Thank you
mfonemaello said:
Hello, I need help to recover my S8 PRO, it does not start,:crying::crying: and I have try flashed with flash tool and with "smartphone multi port download tool" and it gives me these errors, if someone can help me. Thank you
Click to expand...
Click to collapse
Can you specify what errors you're receiving, maybe I can help you, I have a S8 Pro too
thxs Klima i fixed
Klima1123 said:
Can you specify what errors you're receiving, maybe I can help you, I have a S8 Pro too
Click to expand...
Click to collapse
thanks I could fix it:good: Do you know that the latest firmware has 1 Trojan on the sound recorder?
mfonemaello said:
thanks I could fix it:good: Do you know that the latest firmware has 1 Trojan on the sound recorder?
Click to expand...
Click to collapse
I've heard about it, but I didn't noticed nothing strange coming from the app, I'll scan it with avast, if he finds something, I'll deleted him, my phone does have root
---------- Post added at 01:50 PM ---------- Previous post was at 01:41 PM ----------
Hey guy, I'm trying to port lineage os 14 & 15 to the S8 Pro, do you have experience with twrp, flash etc.? You could help with being my beta tester, next I'll put some betas on android file host, and make a forum here on XDA for the phone
Does anyone have a link to the twrp img file, or any other custom recovery, i cant find it anywhere, all the links just point to the flash tool but it doesn't contain the twrp img file?
4ndyroid said:
Does anyone have a link to the twrp img file, or any other custom recovery, i cant find it anywhere, all the links just point to the flash tool but it doesn't contain the twrp img file?
Click to expand...
Click to collapse
I have found it on 4pda.
Just google ulefone s8 pro 4pda.
You need to let translate by google, because of different language.
4ndyroid said:
Does anyone have a link to the twrp img file, or any other custom recovery, i cant find it anywhere, all the links just point to the flash tool but it doesn't contain the twrp img file?
Click to expand...
Click to collapse
Here: https://androidfilehost.com/?fid=962021903579483650
Use this to install twrp and magisk root
Hi, thanks you for your help, was able to flash twrp using the tool you directed me to, however now im stuck at the splash screen (ulefone s8 image) and phone wont boot (am able to flash stock rom to revocer phone, so not a complete brick, just cant get it to boot after flashing twrp), any ideads?
Klima1123 said:
Here: https://androidfilehost.com/?fid=962021903579483650
Use this to install twrp and magisk root
Click to expand...
Click to collapse
Doesn't work with the firmware V3.01 and V3.03. Getting in the recovery works fine, but booting the system is impossible. The boot stay stuck at the "S8 Pro With android (something)" splash screen.
4ndyroid said:
Hi, thanks you for your help, was able to flash twrp using the tool you directed me to, however now im stuck at the splash screen (ulefone s8 image) and phone wont boot (am able to flash stock rom to revocer phone, so not a complete brick, just cant get it to boot after flashing twrp), any ideads?
Click to expand...
Click to collapse
Something like this has happened to me too. Boot your phone on twrp then select the option 'Wipe', then "Format data", my phone only booted up after I did this
---------- Post added at 04:41 PM ---------- Previous post was at 04:36 PM ----------
mfonemaello said:
thanks I could fix it:good: Do you know that the latest firmware has 1 Trojan on the sound recorder?
Click to expand...
Click to collapse
In the sound recorder I didnt find nothing, but the app GYBeautySnap aka BeautyMakeup open some annoyng processes (that consumes about 40mb of ram) that has something like ads, I think he is the real virus
Tried wiping then 'format system', still didn't work, stays stuck at the boot logo, bit thanks for the help anyway.
It rebootq only to a green TWRP!
Touf344 said:
Doesn't work with the firmware V3.01 and V3.03. Getting in the recovery works fine, but booting the system is impossible. The boot stay stuck at the "S8 Pro With android (something)" splash screen.
Click to expand...
Click to collapse
My phone use V3.01 firmware and it's worked
Klima1123 said:
My phone use V3.01 firmware and it's worked
Click to expand...
Click to collapse
What was the process you used?
4ndyroid said:
What was the process you used?
Click to expand...
Click to collapse
I've retried the whole process: flashed the stock rom, booted the phone on fastboot, used this (https://androidfilehost.com/?fid=962021903579483650) to install twrp, and then i tried booting the phone..... :silly: it's don't started , so i used that noverity.zip that comes with the tool, after this my phone booted, the tutorial that i used demands the installantion of this zip View attachment noverity.zip
Klima1123 said:
I've retried the whole process: flashed the stock rom, booted the phone on fastboot, used this (https://androidfilehost.com/?fid=962021903579483650) to install twrp, and then i tried booting the phone..... :silly: it's don't started , so i used that noverity.zip that comes with the tool, after this my phone booted, the tutorial that i used demands the installantion of this zip View attachment 4460246
Click to expand...
Click to collapse
Hi, thanks for your help, seems I missed the noverity.zip part. What is the noverity.zip and how did you install it? (flashed via TWRP, ADB or using the tool?) Could you link the tutorial you used?
4ndyroid said:
Hi, thanks for your help, seems I missed the noverity.zip part. What is the noverity.zip and how did you install it? (flashed via TWRP, ADB or using the tool?) Could you link the tutorial you used?
Click to expand...
Click to collapse
That noverity.zip disables a mechanism in the boot partition that verify the boot itself and the system partition, when you install twrp a little bit of the boot partition is altered and so the boot is blocked.
Install the zip using twrp. You can take a look at this (https://www.getdroidtips.com/twrp-recovery-ulefone-s8-pro/), but if I remember well, that s8 pro toolkit app is the one that asks you to install the zip
Klima1123 said:
That noverity.zip disables a mechanism in the boot partition that verify the boot itself and the system partition, when you install twrp a little bit of the boot partition is altered and so the boot is blocked.
Install the zip using twrp. You can take a look at this (https://www.getdroidtips.com/twrp-recovery-ulefone-s8-pro/), but if I remember well, that s8 pro toolkit app is the one that asks you to install the zip
Click to expand...
Click to collapse
Hi, thanks for the help, still didn't work even after flashing the noverity.zip but cheers anyway
4ndyroid said:
Hi, thanks for the help, still didn't work even after flashing the noverity.zip but cheers anyway
Click to expand...
Click to collapse
which firmware version are installed on your phone? Have you tried flashing the official ROM from the ulefone site, then retried the process?
Have tried on both v3. 01 & v3. 03 firmwares. Stock firmware wasn't downloaded directly from ulefone site, imagine it will be the same but will give it a go.
Hay guys this is the first TWRP for blackberry
It's only test on blackberry keyone none bootloader version
It's already can use keyboard touch and none bug
For some reason i cant open source my code,im sorry about it
How to flash it?
1.make your keyone into fastboot mode
2.use fastboot.exe to flash twrp
3.fastboot flash recovery twrp-3.2.1-0-keyone.img
maybe someone don't think this is real,so i provide a video
TWRP ON BLACKBERRY KEYONE
DOWNLOAD LINK
The Google Drive download link you posted doesn't work. I don't have permission to download the file.
There is no access to download TWRP from the specified link.
Good to see it! But you need to change google drive permission.
Dayongdo said:
Good to see it! But you need to change google drive permission.
Click to expand...
Click to collapse
try this link https://drive.google.com/file/d/164QUwX0UH8s-A8FyT8Mbc3in7QroO_Ss/view?usp=sharing
Dayongdo said:
Good to see it! But you need to change google drive permission.
Click to expand...
Click to collapse
RipenedCoconut said:
The Google Drive download link you posted doesn't work. I don't have permission to download the file.
Click to expand...
Click to collapse
komir112 said:
There is no access to download TWRP from the specified link.
Click to expand...
Click to collapse
komir112 said:
There is no access to download TWRP from the specified link.
Click to expand...
Click to collapse
try this link https://drive.google.com/file/d/164QUwX0UH8s-A8FyT8Mbc3in7QroO_Ss/view?usp=sharing
SKDushow said:
Hay guys this is the first TWRP for blackberry
It's only test on blackberry keyone none bootloader version
It's already can use keyboard touch and none bug
For some reason i cant open source my code,im sorry about it
How to flash it?
1.make your keyone into fastboot mode
2.use fastboot.exe to flash twrp
3.fastboot flash recovery twrp-3.2.1-0-keyone.img
maybe someone don't think this is real,so i provide a video
TWRP ON BLACKBERRY KEYONE
DOWNLOAD LINK
Click to expand...
Click to collapse
Is it possible to install custom rom if you already install TWRP?
st4rt2th1nk said:
Is it possible to install custom rom if you already install TWRP?
Click to expand...
Click to collapse
I can install MIUI9 port rom by myself
SKDushow said:
I can install MIUI9 port rom by myself
Click to expand...
Click to collapse
Wow, that's good... is there any bugs?
SKDushow said:
I can install MIUI9 port rom by myself
Click to expand...
Click to collapse
Do you try to install magisk via TWRP?
komir112 said:
Do you try to install magisk via TWRP?
Click to expand...
Click to collapse
magisk is already works good
st4rt2th1nk said:
Wow, that's good... is there any bugs?
Click to expand...
Click to collapse
it's still in porting
Can you port for BBB100-7 Indonesia?
Rom like pixel experience or another stock android
If i install TWRP on my device, how to enter recovery mode? As i know Keyone has only fastboot mode, so if we reboot device (power button + volume up / volume down) we get fastboot, not recovery.
SKDushow said:
Hay guys this is the first TWRP for blackberry
Click to expand...
Click to collapse
hey dude! u are cool if u made this thing! but there are too many questions about this.
1) how i can boot this recovery?
2) does it persist after reboot?
3) are there any viruses, trojans or other destructive behavior in this recovery?
4) how is it possible to work? as far as i know it needs an unlocked bootloader to boot. Magisk should patch the kernel, but after the patch its signature will change (i think the kernel have sign too), will it really not affect the boot?
5) how does recovery bypass flash encryption? maybe recovery turns off encryption?
6) after installing the recovery, the system is not damaged? are all system and applications, their data, photos saved?
komir112 said:
If i install TWRP on my device, how to enter recovery mode? As i know Keyone has only fastboot mode, so if we reboot device (power button + volume up / volume down) we get fastboot, not recovery.
Click to expand...
Click to collapse
use adb
-=Raider=- said:
hey dude! u are cool if u made this thing! but there are too many questions about this.
1) how i can boot this recovery?
2) does it persist after reboot?
3) are there any viruses, trojans or other destructive behavior in this recovery?
4) how is it possible to work? as far as i know it needs an unlocked bootloader to boot. Magisk should patch the kernel, but after the patch its signature will change (i think the kernel have sign too), will it really not affect the boot?
5) how does recovery bypass flash encryption? maybe recovery turns off encryption?
6) after installing the recovery, the system is not damaged? are all system and applications, their data, photos saved?
Click to expand...
Click to collapse
u can use adb enter recovery after flash,I use development device system,that doesn't have boot sign check,after flash the system still works good,if you just want root,u can try supersu or addon su(by mokee)
This is epic! I always loved the device. I hope there is some kind of development soon!
st4rt2th1nk said:
Can you port for BBB100-7 Indonesia?
Rom like pixel experience or another stock android
Click to expand...
Click to collapse
Hope to see this too, since i'm BB Merah Putih user too
SKDushow said:
Hay guys this is the first TWRP for blackberry
It's only test on blackberry keyone none bootloader version
It's already can use keyboard touch and none bug
For some reason i cant open source my code,im sorry about it
How to flash it?
1.make your keyone into fastboot mode
2.use fastboot.exe to flash twrp
3.fastboot flash recovery twrp-3.2.1-0-keyone.img
maybe someone don't think this is real,so i provide a video
TWRP ON BLACKBERRY KEYONE
DOWNLOAD LINK
Click to expand...
Click to collapse
Hey man, 1st of all - thank you so much for all the hard work you've done
I tried doing as you've said
That's what I get:
fastboot devices
1164180706 fastboot
fastboot flash recovery twrp-3.2.1-0-keyone.img
Sending 'recovery' (25532 KB) FAILED (remote: 'authboot command permission denied')
fastboot: error: Command failed
Some kind of permission error
I really need to get root access on my BlackBerry keyone - I hope I can make it with Magisk after installing TWRP
any suggestions?