Database Info

[Q] Back to stock recovery B137SP03 without recovery image

Hello all,
I have been going slightly mad today trying to get my mate 7 2GB back from CWM to stock recovery. The main problem is that I do not have a stock recovery image. But after being shown where to find one, I noticed that I could not get it successfully flashed either.
Since I do not really know how to do this, I used flashify, but that did not work and either returned me to the CWM or sent me to rescue.
Can someone help me to a) get a stock recovery image for the Mate 7 version MT7-L09 and b) show me how to properly flash it?

Find stock recovery is easy.. only a question why flashify don't work for you? It work fine for me... your device is rooted?

djzero86 said:
Find stock recovery is easy.. only a question why flashify don't work for you? It work fine for me... your device is rooted?
Click to expand...
Click to collapse
Hi @dzjero86, my device is rooted and I am on the B137SP03 version atm, using CWM. Don't know why Flashify is not working for flashing a recovery image. It works fine to flash a CWM recovery. Maybe I have the wrong stock recovery... If you can find it, can you send me the link or add it as an attachment here?

Please guys help me to . i have that same problem i have been trying to flash the stock recovery again but i couldn't even with flashify after i flash i takes me to bootloader screen and it shows me a fun_error message
I have a tl-10 device

dekraan said:
Hi @dzjero86, my device is rooted and I am on the B137SP03 version atm, using CWM. Don't know why Flashify is not working for flashing a recovery image. It works fine to flash a CWM recovery. Maybe I have the wrong stock recovery... If you can find it, can you send me the link or add it as an attachment here?
Click to expand...
Click to collapse
A way to find the stock recovery is : download the whole B137SP03 Rom from the Huawei site , and use a tool called "Firmware unpacker for Huawei" whit this tool you can extract the recovery.img from the Rom and try to flash it using flashify
Firmware unpacker
http://forum.xda-developers.com/mate-7/development/firmware-unpacker-huawei-t2879754
Rom
http://forum.xda-developers.com/mate-7/general/firmware-huawei-ascend-mate-7-b137sp03-t3041629
Pd : I am not a developer or anything similar but I have some years of experience rooting and etc ...
---------- Post added at 10:12 AM ---------- Previous post was at 10:00 AM ----------
Ali_adel_medo said:
Please guys help me to . i have that same problem i have been trying to flash the stock recovery again but i couldn't even with flashify after i flash i takes me to bootloader screen and it shows me a fun_error message
I have a tl-10 device
Click to expand...
Click to collapse
You have a unlocked bootloader???

Yes i have unlocked and rooted the phone using the cwm recovery and now a i can't flash the stock recovery any more

Ali_adel_medo said:
Yes i have unlocked and rooted the phone using the cwm recovery and now a i can't flash the stock recovery any more
Click to expand...
Click to collapse
Do you tried flash via fastboot ?
fastboot flash recovery recovery.img
Or try to use this tool
http://forum.xda-developers.com/mat...custom-recovery-tool-mt7-l10-l10-mt7-t3022424
This should work.

The fast boot just stucks at waiting for device
And the tool you send says that the stock recovery works only on tl_09 and my device is tl_10

djzero86 said:
A way to find the stock recovery is : download the whole B137SP03 Rom from the Huawei site , and use a tool called "Firmware unpacker for Huawei" whit this tool you can extract the recovery.img from the Rom and try to flash it using flashify
Firmware unpacker
http://forum.xda-developers.com/mate-7/development/firmware-unpacker-huawei-t2879754
Rom
http://forum.xda-developers.com/mate-7/general/firmware-huawei-ascend-mate-7-b137sp03-t3041629
Pd : I am not a developer or anything similar but I have some years of experience rooting and etc ...
---------- Post added at 10:12 AM ---------- Previous post was at 10:00 AM ----------
You have a unlocked bootloader???
Click to expand...
Click to collapse
Ok, I couldnt access your firmware unpacker, but I did manage to use the tool you suggested.
I have a different recovery screen, but is this the right one? It has EMUI large in centre screen and the options reboot system now, wipe data/factory reset and wipe cache partition.
If this is the correct one, and I am already on the D137SP03 ROM, I should be able to locally update right?
I tried this, and got a lot further this time, but my phone gave an error message during the update. Do I need to flash the original B137SP03 rom again, even though I am already on it?

I think you maybe can flash using adb commands and also you need adb drivers working
---------- Post added at 11:23 AM ---------- Previous post was at 11:15 AM ----------
dekraan said:
Ok, I couldnt access your firmware unpacker, but I did manage to use the tool you suggested.
I have a different recovery screen, but is this the right one? It has EMUI large in centre screen and the options reboot system now, wipe data/factory reset and wipe cache partition.
If this is the correct one, and I am already on the D137SP03 ROM, I should be able to locally update right?
I tried this, and got a lot further this time, but my phone gave an error message during the update. Do I need to flash the original B137SP03 rom again, even though I am already on it?
Click to expand...
Click to collapse
Ok.... you have the stock recovery now???

djzero86 said:
I think you maybe can flash using adb commands and also you need adb drivers working
---------- Post added at 11:23 AM ---------- Previous post was at 11:15 AM ----------
Ok.... you have the stock recovery now???
Click to expand...
Click to collapse
I think so. If stock looks like I described: black screen, large EMUI logo, and the options reboot system now, wipe data/factory reset and wipe cache partition?

That's right... you have stock recovery... sometimes the update fail if the UPDATE.APP is on the internal storage.. try to flash from a micro sd card or re-download the update ....
English is not my first language...

djzero86 said:
That's right... you have stock recovery... sometimes the update fail if the UPDATE.APP is on the internal storage.. try to flash from a micro sd card or re-download the update ....
English is not my first language...
Click to expand...
Click to collapse
Great, thank you for your fantastic help!
I will get a new micro-sd card tomorrow, and will try it right away!

Good luck... come back to report

djzero86 said:
Good luck... come back to report
Click to expand...
Click to collapse
No luck so far.... I've downloaded the update.zip, put it in my mnt/ext_sdcard/dload folder and start the local update. It begins OK, as the progress bar moves along. But after about 25% it shoots to the end, and then I get an update failed screen with a red exclamation mark.
What could I try to get it to work??

dekraan said:
No luck so far.... I've downloaded the update.zip, put it in my mnt/ext_sdcard/dload folder and start the local update. It begins OK, as the progress bar moves along. But after about 25% it shoots to the end, and then I get an update failed screen with a red exclamation mark.
What could I try to get it to work??
Click to expand...
Click to collapse
Ok, I just reinstalled the B137P03 version from the how to install lollipop thread, and that went successful. Now going to try the update.zip! Keep you posted

Ah, now we're talking It seems to have worked. Phone is now showing 'Android is upgrading' and 'optimising app.....'
Great! It does seem strange I had to reinstall the B137SP03 rom, but that did the trick!

Help! Did a Format Data on my MXP

I had the brilliant idea to format everything via TWRP...
TWRP is still there and I can transfer files on my phone but other than that I can do nothing else, I tried to flash 3 different roms, but none is flashing, always giving an 'error executing binary in zip /sd card' or something.
What can I do? Also tried sideloading with ADB but my computer is a ***** and never recognizes adb devices, in CMD at least.

Why don't you try rsd lite to flash stock rom? I think there are tutorials for that

Zakaria.R said:
Why don't you try rsd lite to flash stock rom? I think there are tutorials for that
Click to expand...
Click to collapse
Just downloaded and installed it.
It does not recognize my device, nothing shows up.
My computer is retarded like that. :/

coolkingler1 said:
Just downloaded and installed it.
It does not recognize my device, nothing shows up.
My computer is retarded like that. :/
Click to expand...
Click to collapse
I could recommend you to flash a cm recovery img through twrp to install a cm rom as I read in some threads (not for this device) that cm recovery helped install cm rom when twrp wouldn't, but then again if that fails you would lose twrp and end up with a crappy recovery, that's risky

Zakaria.R said:
I could recommend you to flash a cm recovery img through twrp to install a cm rom as I read in some threads (not for this device) that cm recovery helped install cm rom when twrp wouldn't, but then again if that fails you would lose twrp and end up with a crappy recovery, that's risky
Click to expand...
Click to collapse
I managed to fix my situation. My pc recognizes ADB devices again.
But not RSD Lite, that doesn't recognize my Xplay

coolkingler1 said:
I managed to fix my situation. My pc recognizes ADB devices again.
But not RSD Lite, that doesn't recognize my Xplay
Click to expand...
Click to collapse
You owe your pc some apologies haha, anyway hope you can manage to fix things up, good luck

Zakaria.R said:
You owe your pc some apologies haha, anyway hope you can manage to fix things up, good luck
Click to expand...
Click to collapse
Think i need to flash firmware first? Sideloading with CMD only got to 5% then stopped.

Tried a lot of things but I think it's simply 'bricked' if not hard then at least softbrick.
God, how am I going to explain this to my family, ruined a 330 euro device by tinkering.

coolkingler1 said:
Think i need to flash firmware first? Sideloading with CMD only got to 5% then stopped.
Click to expand...
Click to collapse
Hey buddy,
Look through these forums for a thread about TWRP flashable stock images for the X Play by dev>null. That thread SAVED me when I first got my X Play and was stuck in a bootloop.
You can push that file to your phone and then flash it with TWRP. Then you will have a stock 6.0 or 6.0.1 image with root on your phone. You can then go about reinstalling your apps and Xposed modules.
I hope this helps. Good luck, dude.
EDIT: Found the thread - http://forum.xda-developers.com/moto-x-play/general/rom-xt1563-brasil-stock-6-0-twrp-t3272979/page26

if adb recognises the device then flash the stock firmware though adb.

bablu048 said:
if adb recognises the device then flash the stock firmware though adb.
Click to expand...
Click to collapse
Doesn't work because adb only recognizes it sometimes. When I do start flashing stuff it goes <waiting for device>
EDIT: I can flash a rom maybe via fastboot but it says bootloader denies permission.

since you have twrp, why not flash (restore) those twrp specific roms?

pijes said:
since you have twrp, why not flash (restore) those twrp specific roms?
Click to expand...
Click to collapse
I didn't make one... only in titanium backup did I make a backup, for the rest I just didn't care.
The problem is that permission is denied when I try to flash via CMD/fastboot.
I got the stock EU rom, but it won't flash because permission is denied, also in TWRP it just says Failed

coolkingler1 said:
I didn't make one... only in titanium backup did I make a backup, for the rest I just didn't care.
The problem is that permission is denied when I try to flash via CMD/fastboot.
I got the stock EU rom, but it won't flash because permission is denied, also in TWRP it just says Failed
Click to expand...
Click to collapse
could you share with us some screenshots on your twrp restore attempt?

pijes said:
could you share with us some screenshots on your twrp restore attempt?
Click to expand...
Click to collapse
I can't ;( don't really have a camera to do that.
I can tell you that it looks like this with other roms:
https://www.google.nl/search?hl=nl&...mg..0.6.431.HJmBnci0L6A#imgrc=tt83t9W9pU7wmM:
and that it looks like this with the stock rom:
https://lh5.googleusercontent.com/-...09-h848-no/Screenshot_2013_12_13_13.17.49.png

Download a twrp backup from the forum put it on sdcard and restore. I think kernel won't be there in the twrp backup so install squid's

bablu048 said:
Download a twrp backup from the forum put it on sdcard and restore. I think kernel won't be there in the twrp backup so install squid's
Click to expand...
Click to collapse
I can install kernels, so squid should not be a prob.
Where can I find these backups?

coolkingler1 said:
I can install kernels, so squid should not be a prob.
Where can I find these backups?
Click to expand...
Click to collapse
Here http://forum.xda-developers.com/moto-x-play/general/rom-xt1563-brasil-stock-6-0-twrp-t3272979
---------- Post added at 04:18 AM ---------- Previous post was at 04:16 AM ----------
What OS are you running on PC ?? For RSD it must be windows 7/8 or lower , windows 10 isn't working

I linked to that thread on the previous page. No one cares about what I post!!!

bablu048 said:
Here http://forum.xda-developers.com/moto-x-play/general/rom-xt1563-brasil-stock-6-0-twrp-t3272979
---------- Post added at 04:18 AM ---------- Previous post was at 04:16 AM ----------
What OS are you running on PC ?? For RSD it must be windows 7 or lower , windows 10 isn't working
Click to expand...
Click to collapse
Windows 10 hehe. Will try out the backups.
EDIT: I can't, there is no EU version for the backups.

i cant not install custom roms!

i have problem installing custom roms... can anybody help me?
Steps I follow:
1- With Stock ROM (bootloader and modem correct for custom rom) without custom recovery.
2- OEM unlock activated in developers settings
3- Flash TWRP recovery 3.0.2-4 with Odin 3.12.3
4- In TWRP recovery, swype for do modifications
5- Wipe - Format Data - Write "yes" (tried 4 or 5 times)
6- Reboot to recovery again (tried without this)
7- Flash no-verity-opt-encrypt-4.1 from OTB USB (internal storage tried too)... no errors
8- Reboot to recovery (tried without this)
9- Flash custom rom from OTG USB (internal storage tried too)
10- samsung logo and nothing...
I think the problem is with the encryption of the folder /data but it is assumed that the no-verity-opt-encrypt-4.1 file disables encryption.
i tried Superman rom and The Galaxy project, last versions.

have you tried rooting your phone using this guide
works only on exynos models.

lifeisgood210 said:
have you tried rooting your phone using this guide
works only on exynos models.
Click to expand...
Click to collapse
the problem is installing custom roms, root is possible. But thanks

I have the same problem with most all the roms that I have tried. Superman and Phoenix are not working but TheGalaxyProject is.

I think there is something Samsung has done with the latest firmware that makes it impossible to install custom roms. And nobody in this forum knows it yet

Nothing? I need help...

sakun-ice said:
Nothing? I need help...
Click to expand...
Click to collapse
Have you tried other custom recovery beside TWRP.......

AshTechsoft said:
Have you tried other custom recovery beside TWRP.......
Click to expand...
Click to collapse
The installation tutorial says that I have to have the latest version of twrp (3.0.2-4)

sakun-ice said:
The installation tutorial says that I have to have the latest version of twrp (3.0.2-4)
Click to expand...
Click to collapse
Don't worry try other recovery beside twrp nothing will happens
!!! BUT BEFORE ANY STEPS YOU HAVE TO MAKE BACKUP OF YOUR DEVICE!!!

AshTechsoft said:
Don't worry try other recovery beside twrp nothing will happens
!!! BUT BEFORE ANY STEPS YOU HAVE TO MAKE BACKUP OF YOUR DEVICE!!!
Click to expand...
Click to collapse
Thanks. I'll try tomorrow. I will tell my experience here.

There is no recovery other than TWRP. Another option?

sakun-ice said:
There is no recovery other than TWRP. Another option?
Click to expand...
Click to collapse
Try after flash oldest twrp for your s7 means twrp 3.0.0-0 by Odin
Then try to install custom roms.........
Send your openion.....
---------- Post added at 01:25 PM ---------- Previous post was at 01:24 PM ----------
sakun-ice said:
There is no recovery other than TWRP. Another option?
Click to expand...
Click to collapse
Try after flash oldest twrp for your s7 means twrp 3.0.0-0 by Odin
Then try to install custom roms.........
Here is link of twrp 3.0.0-0
https://dl.twrp.me/herolte/twrp-3.0.0-0-herolte.img.tar
Send your openion.....

solved!!
The problem is that I downloaded the rom and the file was corrupt. Something happens with my computer and my wifi adapter.

sakun-ice said:
solved!!
The problem is that I downloaded the rom and the file was corrupt. Something happens with my computer and my wifi adapter.
Click to expand...
Click to collapse
Yeah!!! I happy that your problem is solved......

moto g3(xt1550) stuck in bootloader warning.

I manged to install superSU on my moto g 3rd gen (XT1550).It gave the error "superSU binaries not found"
So I installed superSU 2.65.Now my phone is stuck on bootloader warning.However I can still go to TWRP. Trouble is,installing the previous superSU is not helping either.
Please tell me what went wrong and how can I fix it.Its my first time so I apologise for any newbie mistake here.Thanks for help.

kanav11090 said:
I manged to install superSU on my moto g 3rd gen (XT1550).It gave the error "superSU binaries not found"
So I installed superSU 2.65.Now my phone is stuck on bootloader warning.However I can still go to TWRP. Trouble is,installing the previous superSU is not helping either.
Please tell me what went wrong and how can I fix it.Its my first time so I apologise for any newbie mistake here.Thanks for help.
Click to expand...
Click to collapse
Not sure what you're saying, but once you unlock the bootloader you will get a long bootloader warning unless you flash a boot logo.
See step 4 in:
https://forum.xda-developers.com/20...gin-how-to-t3599251/post72111431#post72111431

KrisM22 said:
Not sure what you're saying, but once you unlock the bootloader you will get a long bootloader warning unless you flash a boot logo.
See step 4 in:
https://forum.xda-developers.com/20...gin-how-to-t3599251/post72111431#post72111431
Click to expand...
Click to collapse
My phone is bootlooping as I tried to reinstall magisk 14.0 over the 14.5 in magisk manager app itself !! It is stuck on warning message !
Twrp is working hopefully ,
I tried to clear system, data , dalvik , cache but it still results in bootloop.
Pls help !

KrisM22 said:
Not sure what you're saying, but once you unlock the bootloader you will get a long bootloader warning unless you flash a boot logo.
See step 4 in:
https://forum.xda-developers.com/20...gin-how-to-t3599251/post72111431#post72111431
Click to expand...
Click to collapse
The phone is stuck on bootloader warning.The step you mentioned points out how to remove the warning screen. My phone was stuck on it until its battery ran out. I have today installed superSU 2.62 beta and did what Tassusian did.While the phone now boots after the warning,it is stuck on the motorola logo screen.I'm waiting to see what it does next.Thanks for the reply though.It is good to see a helping hand.

kanav11090 said:
The phone is stuck on bootloader warning.The step you mentioned points out how to remove the warning screen. My phone was stuck on it until its battery ran out. I have today installed superSU 2.62 beta and did what Tassusian did.While the phone now boots after the warning,it is stuck on the motorola logo screen.I'm waiting to see what it does next.Thanks for the reply though.It is good to see a helping hand.
Click to expand...
Click to collapse
Try to install a different rom ! Clean flash that ROM hopefully that will solve the bootloop issue !
(Clear the system while clean flashing ) and after booting the whole rom then instal root (superSU/magisk)zip file in twrp.

kanav11090 said:
The phone is stuck on bootloader warning.The step you mentioned points out how to remove the warning screen. My phone was stuck on it until its battery ran out. I have today installed superSU 2.62 beta and did what Tassusian did.While the phone now boots after the warning,it is stuck on the motorola logo screen.I'm waiting to see what it does next.Thanks for the reply though.It is good to see a helping hand.
Click to expand...
Click to collapse
What are you installing SuperSU TO? Have you flashed a ROM? Flash a different ROM. Some repeat of above post @Mohammed Siamwala . Avoid majisk until you fix this.- I find it buggy sometimes.

I suspect I have corrupted my ROM somehow.
Installing superSU 2.62 Beta seems to boot it but it still gets stuck at the motorola logo screen.Which ROM should I use and how do I install it?Thanks for diagnosing the problem.:good:

Mohammed Siamwala said:
Try to install a different rom ! Clean flash that ROM hopefully that will solve the bootloop issue !
(Clear the system while clean flashing ) and after booting the whole rom then instal root (superSU/magisk)zip file in twrp.
Click to expand...
Click to collapse
Will certainly try it tomorrow.Thanks for the tip.Any suggestions about which ROM I should use?

kanav11090 said:
Will certainly try it tomorrow.Thanks for the tip.Any suggestions about which ROM I should use?
Click to expand...
Click to collapse
Try any stable nougat ROM like LOS 14.1 ! Avoid installing Oreo ROM as they're still in beta

Mohammed Siamwala said:
Try any stable nougat ROM like LOS 14.1 ! Avoid installing Oreo ROM as they're still in beta
Click to expand...
Click to collapse
hi,
Sorry for getting back so late as I away with my family.I did as you said but the system is stuck at
'patching system image unconditionally....'
I browsed and found this link:
https://forum.xda-developers.com/oneplus-3t/help/twrp-stuck-patching-image-t3623593/page2
It says that sideloading the ROM worked.Will it work here? Thanks for being with me for this long time.

kanav11090 said:
hi,
Sorry for getting back so late as I away with my family.I did as you said but the system is stuck at
'patching system image unconditionally....'
I browsed and found this link:
https://forum.xda-developers.com/oneplus-3t/help/twrp-stuck-patching-image-t3623593/page2
It says that sideloading the ROM worked.Will it work here? Thanks for being with me for this long time.
Click to expand...
Click to collapse
Which version of TWRP you're using ???
Make sure you're having latest !
And try flashing again

kanav11090 said:
hi,
Sorry for getting back so late as I away with my family.I did as you said but the system is stuck at
'patching system image unconditionally....'
I browsed and found this link:
https://forum.xda-developers.com/oneplus-3t/help/twrp-stuck-patching-image-t3623593/page2
It says that sideloading the ROM worked.Will it work here? Thanks for being with me for this long time.
Click to expand...
Click to collapse
Sorry, I have no idea.

Mohammed Siamwala said:
Which version of TWRP you're using ???
Make sure you're having latest !
And try flashing again
Click to expand...
Click to collapse
I'm using twrp 3.2.0. Which one should I use?

KrisM22 said:
Sorry, I have no idea.
Click to expand...
Click to collapse
Will my phone get hard-bricked if i do it unsuccesfully? I'm new so I don't have much knowldege about this.Thanks.

kanav11090 said:
I'm using twrp 3.2.0. Which one should I use?
Click to expand...
Click to collapse
3.2.1
Make sure:
wipe/advanced/check: dalvik/art, system, data, cache - all 4, but NOT internal storage or SDcard
click the thing that says not to install the TWRP app when rebooting
take a screenshot of error (same way as in ROM) and post it.
---------- Post added at 12:18 AM ---------- Previous post was at 12:18 AM ----------
kanav11090 said:
Will my phone get hard-bricked if i do it unsuccesfully? I'm new so I don't have much knowldege about this.Thanks.
Click to expand...
Click to collapse
It's possible. I do not know.

no success.Is there a chance that the zip file is corrupted?Thanks for help.

kanav11090 said:
no success.Is there a chance that the zip file is corrupted?Thanks for help.
Click to expand...
Click to collapse
https://forum.xda-developers.com/2015-moto-g/help/problems-flashing-oreo-8-x-check-t3726839

KrisM22 said:
https://forum.xda-developers.com/2015-moto-g/help/problems-flashing-oreo-8-x-check-t3726839
Click to expand...
Click to collapse
Did as you said,still stuck at 'patching system unconditionally'. Any other OS ROMs that I can try using with TWRP 3.2.1? Thanks for the article though.It threw light on many other new things.

kanav11090 said:
Did as you said,still stuck at 'patching system unconditionally'. Any other OS ROMs that I can try using with TWRP 3.2.1? Thanks for the article though.It threw light on many other new things.
Click to expand...
Click to collapse
Thanks for the help mate.I finally managed to get the stock ROM and shifted to it.Now my phone is faster than ever because of minimal gapps and other useless stuff being thrown out.Thanks for your help once more.

YOTA3 full firmware and ROOT for Magisk

I'm form China.
YOTA3 full firmware Link:
[国人太利害，不想查水表.终于知道了！我投降！]
Y3-ota-236_Y3MXP1805077_full.zip is a local updata Full pag
Usage method:
Copy to your YOTA3.
Open setup->system update
Click on the top right corner menu.
Local upgrade
Select the file Y3-ota-236_Y3MXP1805077_full.zip
DO。。。。。。。。。

昨日之日不可留，今日之日多烦忧！

That is very cool. There is a root.docx that can be downloaded separately that can be partially translated using the google tools.

Update: Now i am facing a major problem. I have done this steps:
fastboot flashing unlock ok
fastboot boot patch_boot.img ok
now the phone starts and asks for a password. i tried 12345678 but it continues to say wrong password...how can i unlock it? for the phone there was no password set...
Hello,
is this the international rom version?
I tried to download it. To do so i have to install BaiduNetdisk. but after installing it, i still cant download it. It seems that i have to create an account or so...could you please upload it to a source, that offers at least an englisch version of its site?
update: found a workaround. I am using jdownloader. Start jdownloader, copy the url of the directory at baidu from browser. jdownloader asks for provided password "dnjq". Files are then added to jdownloader automatically. Start download and enter the capchas.

This solid is made by Chinese netizens.
Sorry!!!!Forgot to say that it is best to restore ROOT after the factory is out or without a password.

gor516don said:
This solid is made by Chinese netizens.
Sorry!!!!Forgot to say that it is best to restore ROOT after the factory is out or without a password.
Click to expand...
Click to collapse
I used your patched_boot.img, but now the phone asks for a password and I didn't have one.

vevgeniev said:
I used your patched_boot.img, but now the phone asks for a password and I didn't have one.
Click to expand...
Click to collapse
you can use magisk APP patch boot.img
I guess 128G and 64G's BOOT.img are different.

I found another way around:
Restored the factory image.
Set a PIN code.
Installed the patched boot img again.
Now the phone is unlocked and I have root.
Thank you for the instructions and the img file!
Do you know if it is possible to install custom recovery?

Some Chinese netizens are doing this, but nothing has been done.

2018/8/24 add twrp.img to this
https://pan.baidu.com/s/1ezT1OCrOMAzcrYRC5KbmPQ
password: dnjq
code:
fastboot flash recovery rec.img
fastboot flash recoverybp rec.img
(recoverybp is recovery backup)

Did you install this recovery img?

vevgeniev said:
Did you install this recovery img?
Click to expand...
Click to collapse
YES.I use this to backup my phone.

gor516don said:
YES.I use this to backup my phone.
Click to expand...
Click to collapse
Thanks a lot. The Y3 is now rooted!
Unfortunately i could not install the full rom you provided. Did anybody install this rom? I have the 128GB version of the Y3 could this be an issue?

leser12 said:
Thanks a lot. The Y3 is now rooted!
Unfortunately i could not install the full rom you provided. Did anybody install this rom? I have the 128GB version of the Y3 could this be an issue?
Click to expand...
Click to collapse
Mine is also 128G version. This ROM is brushed in local update mode. It is not painted with TWRP.

HI! I need STOK RECOVERY! anyone have, give me please !

KANT_IP said:
HI! I need STOK RECOVERY! anyone have, give me please !
Click to expand...
Click to collapse
I am update to baiduyun.

gor516don said:
I'm form China.
YOTA3 full firmware Link:
https://pan.baidu.com/s/1ezT1OCrOMAzcrYRC5KbmPQ
password: dnjq
Y3-ota-236_Y3MXP1805077_full.zip is a local updata Full pag
Usage method:
Copy to your YOTA3.
Open setup->system update
Click on the top right corner menu.
Local upgrade
Select the file Y3-ota-236_Y3MXP1805077_full.zip
DO。。。。。。。。。
Click to expand...
Click to collapse
what tool you use to flash, i cannot flash file img

whynot4444 said:
what tool you use to flash, i cannot flash file img
Click to expand...
Click to collapse
look 2 post.

gor516don said:
look 2 post.
Click to expand...
Click to collapse
i dont see it, can you help me find it, im use qpst to flash but it error
---------- Post added at 10:13 AM ---------- Previous post was at 10:12 AM ----------
gor516don said:
look 2 post.
Click to expand...
Click to collapse
i dont see it, im use QPST but it just error

whynot4444 said:
i dont see it, can you help me find it, im use qpst to flash but it error
---------- Post added at 10:13 AM ---------- Previous post was at 10:12 AM ----------
i dont see it, im use QPST but it just error
Click to expand...
Click to collapse
This Page has boot.img
Use Magisk Patch it
then press the power and volume down button after the fastboot screen.
use https://dl.google.com/android/reposi...st-windows.zip
run:
fastboot flashing unlock
fastboot boot patch_boot.img
patch_boot.img form magisk patch
if you flash recovery
fastboot flashing recovery TWRP.img