Database Info

bionix 2 overclock

hey guys im having a lil problem getting my 1.5ghz overcloxk to stay.. i deleted cpuspeed, set a profile, enable it to boot on startup in pimpmycpu after lik 5 10 mins it goes bacl to stock yet everything is still enabled under pimpmy cpu anyideas???
G2x 1.5ghz 2.3.3

aspiredude86 said:
hey guys im having a lil problem getting my 1.5ghz overcloxk to stay.. i deleted cpuspeed, set a profile, enable it to boot on startup in pimpmycpu after lik 5 10 mins it goes bacl to stock yet everything is still enabled under pimpmy cpu anyideas???
G2x 1.5ghz 2.3.3
Click to expand...
Click to collapse
Did save the profile?
Set as boot?
Reboot?
Try reading how to use pimpmycpu
Cuz it works for me....
Or try to flash the morfic kernel again
Sent from my LG-P999 using XDA Premium App

yea tried dat.. its weird cuz linpack at 1.5ghz after5 mins goes back to 35flops n my quadrant is da same..mayb a gllitch w linpack..
G2x 1.5ghz 2.3.3

there are still currently some issues with the governor(s) that the tegra chips will use and OC on boot is a little quirky as well... patience my friend...
the great LG gods will hopefully release a nice 2.3.4 build for us with a new baseband and drivers to make our devices number 1!

Does SetCpu overclocking work on both cores?

I use the SetCPU on the HTC Sensation 4G, it looks like it only scaling the cpu0. I am overclocking it to 1.5GHz but when I query the cpu frequency I don't see it on cpu1.
can somebody run the fallowing lines on adb shell to see if the scaling works for you?
Code:
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq
cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_cur_freq
cpu0 gives 1512000 for me but cpu1 gives 1188000
ps cpu1 goes idle and this file becomes unavaliable, I run linpack run multi-thread just before I query the cpu1.
Sent from my HTC Sensation 4G using XDA App

How did you even get the Setcpu to recognize the sensation's 1.2ghz? How did you detect the device?!

Knucklessg1 said:
How did you even get the Setcpu to recognize the sensation's 1.2ghz? How did you detect the device?!
Click to expand...
Click to collapse
Custom kernel but setcpu definitely isn't working right with them either. Still not 100% compatible with our asynchronous cpu.
Sent from my Leedroided Htc Sensation 4g!

dr.m0x said:
Custom kernel but setcpu definitely isn't working right with them either. Still not 100% compatible with our asynchronous cpu.
Sent from my Leedroided Htc Sensation 4g!
Click to expand...
Click to collapse
I have a custom kernel that supports 1.8ghz. but setcpu only allows 998 to be the maximum when i click nexus one/snapdragon. I don't know what other options i have.

If you have a custom kernel that supports it (most do i think) setcpu should have an option to autodetect. You shouldn't have to select a device. If autodetect isn't available try uninstalling setcpu and reinstalling it. None of the device selections will work for us because our device/chipset isn't supported for manual selection (yet).

If You're using a custom kernel then delete set cpu and use an OC Daemon like the Virtuous Daemon with Unity Kernel or user Android Rev HD and Mike's OC Daemon with any compatible custom kernel -- which depends on if you're using a 2.3.3 or a 2.3.4 ROM.
How that helps d0oD
Sent from my HTC Sensation Z710e using XDA Premium App

BonesRed said:
If You're using a custom kernel then delete set cpu and use an OC Daemon like the Virtuous Daemon with Unity Kernel or user Android Rev HD and Mike's OC Daemon with any compatible custom kernel -- which depends on if you're using a 2.3.3 or a 2.3.4 ROM.
How that helps d0oD
Sent from my HTC Sensation Z710e using XDA Premium App
Click to expand...
Click to collapse
How easy is it to employ the OC Daemon and a kernal for it? Is it something we can just DL to out SD card?

Yes Dude, just flash a custom rom. If you're on a 2.3.3 based rom there's plenty of custom kernels and if you're on a 2.3.4 based rom just flash The Unity V6 or V7 kernel which should come with the virtuous OVERCLOCK Daemon included as part of the flashable.zip that you can find in the Leedroid ROM's thread in development.
Sent from my HTC Sensation 4G using XDA Premium App

BonesRed said:
If You're using a custom kernel then delete set cpu and use an OC Daemon like the Virtuous Daemon with Unity Kernel or user Android Rev HD and Mike's OC Daemon with any compatible custom kernel -- which depends on if you're using a 2.3.3 or a 2.3.4 ROM.
How that helps d0oD
Sent from my HTC Sensation Z710e using XDA Premium App
Click to expand...
Click to collapse
Great info, thanks.
Btw, love your avatar.
Sent from my HTC Glacier using XDA Premium App

I just set OC to 1890Mhz
Cpu0 is at 1890
and when i ran linpack and got Cpu1 it was only at 1188.
Unity V5 on Senseless 1.3

I found this out before SOFF with the kernel module insmod. Even with the virtusous_oc demon, it still not working. I'm using 2.3.4 kernel with smartass, I wonder if that works on second core.
Sent from my HTC Sensation Z710e using XDA App

I just checked with insert coin 2.3.4 rom scaling governor of the cpu0 is smartass and governor of cpu1 is ondemand. I guess that does not work either.
cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
Sent from my HTC Sensation Z710e using XDA App

haha, I bet this phone is a single core really with a bit HTC fakery... could be why the cpu benchmarks are so bad lol

anarchyuk said:
haha, I bet this phone is a single core really with a bit HTC fakery... could be why the cpu benchmarks are so bad lol
Click to expand...
Click to collapse
hahaha, they also said its unibody when in fact its not...

Come on we need further testing, need to know the KERNEL, ROM, and what app you are using to control the CPU. CF-Bench is a longer test that stresses both cores.
If you look a the thread with Faux this is an issue with the ROMs or the OC apps, not the CPU, which the CPU in the phone is one of the only ones with an ASYMMETRIC CPU, meaning that the cores do not sync or lock to one another.

I am using set cpu with the unity v7 kernel and it works fine I am over clocked to 1.7ghz at full, when battery gets low goes down to 700mhz, when screen off about 500 mhz
when using stock kernal I used a manual settings using setCPU.txt obv cant over clock it but could under volt it to save battery when screen was off... if anybody wants my set cpu profile (txt file) I still have it floating about

you know what here is the file
place the file on the root of your sd card and in set cpu select manful from the device list.
remember stock kernel = no overclock but happy under clocking

Kurisu87 said:
I am using set cpu with the unity v7 kernel and it works fine I am over clocked to 1.7ghz at full, when battery gets low goes down to 700mhz, when screen off about 500 mhz
when using stock kernal I used a manual settings using setCPU.txt obv cant over clock it but could under volt it to save battery when screen was off... if anybody wants my set cpu profile (txt file) I still have it floating about
Click to expand...
Click to collapse
Kurisu87 said:
you know what here is the file
place the file on the root of your sd card and in set cpu select manful from the device list.
remember stock kernel = no overclock but happy under clocking
Click to expand...
Click to collapse
Ok you can't apparently pay attention to the point of this thread, all CPU apps, CPU Master, SetCPU, Virtuous Overclock all are able to overclock my CPU with the custom kernels, the problem is not me being able to overclock or not, its been tested by me many times with other kernels as well, and the OP that the Second Core is not sync and also not being modified by the governor as well. So all the CPU apps are only controlling the single core.

Does anybody tried CPU Master ? I think it's the OC utility that coredroid ROM suggest...

MasterKaiser said:
Does anybody tried CPU Master ? I think it's the OC utility that coredroid ROM suggest...
Click to expand...
Click to collapse
same problem exists, you can look at my discussion with Faux123
http://forum.xda-developers.com/showthread.php?t=1216197&page=7

[q] overclock kernel????

hy guys..
i've oc my phone using no-frills and set max speed to 801mhz(using cm7 kernel)..governor : performance ;I/O : cfq...
it works while phone is on, then when i restart my phone it's back to default setting..
what about that?
it is usual for oc??
(sorry i am a newbie)

U must check apply on boot option in no frills cpu..well sometimes it might not work if ur phone hasn't shutdown properly n btw for precaution dont use max cpu for fit..in least cases it might damage ur hardware

MajinSaiyan4 said:
U must check apply on boot option in no frills cpu..well sometimes it might not work if ur phone hasn't shutdown properly n btw for precaution dont use max cpu for fit..in least cases it might damage ur hardware
Click to expand...
Click to collapse
so Dude, according to you what should i do? i've used a costum rom..so i think it is possible if i oc the cpu speed.. is that right?

Yup..if custom rom contains oc kernel then u can oc by using no frills cpu...most custm roms do have oc kernel BTW
Sent from my GT-S5670

Hmmmm.. i think using the max speed just wasting the battery..
I'm just using the oc for playing the hd games...
Just my opinion after all...
Sent from my GT-S5670 using xda premium

just suggestion, set min freq to minimum and set max freq to maximum freq

MajinSaiyan4 said:
Yup..if custom rom contains oc kernel then u can oc by using no frills cpu...most custm roms do have oc kernel BTW
Sent from my GT-S5670
Click to expand...
Click to collapse
thank you guys,,

cygnus39 said:
Hmmmm.. i think using the max speed just wasting the battery..
I'm just using the oc for playing the hd games...
Just my opinion after all...
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
thank you gan

[Q] (Q)How to overclock.

Hello world. I'm running faux 004 but when I try to mess with my CPU limits with SetCpu etc. It only goes up to 1.51. What do I have to do to make higher speeds available?

FrenzyGr said:
Hello world. I'm running faux 004 but when I try to mess with my CPU limits with SetCpu etc. It only goes up to 1.51. What do I have to do to make higher speeds available?
Click to expand...
Click to collapse
the kernel wont have higer speeds try bricked kernel n cpu master free
Sent from my Sensation using xda premium

FrenzyGr said:
Hello world. I'm running faux 004 but when I try to mess with my CPU limits with SetCpu etc. It only goes up to 1.51. What do I have to do to make higher speeds available?
Click to expand...
Click to collapse
try system tuner to overclock your processor...it works with faux 004 (also if you want performance change the governer to ondemand. its possible with system tuner too)

janarioo said:
the kernel wont have higer speeds try bricked kernel n cpu master free
Sent from my Sensation using xda premium
Click to expand...
Click to collapse
Each kernel has a range of frequencies built in, check the specification before you flash to get the range you want. All of the CPU management apps can only work within the ranges defined in the kernel.
sent from HTC Pyramid using Tapatalk 2

Try the new Bricked kernel. You can easily set the maximum and minimum frequencies simply by renaming the ZIP file. Use Recovery to flash. Setting CPU frequencies was never that easy!

I would say try bricked (like aayush mentioned). As he said, you can change the clock speeds by renaming the zip file (up to 1,944 Ghz, but only if your phone can handle it, so I would suggest that you first use "System Tuner" to test how high you can go with oc).

try searching for a kernel that supports hiigher clock rate
for example when flashing arhd it asks you about the kernel you want and not sure wich one can go to 1.7ghz or more
http://www.google.com/url?sa=t&rct=...xOjqCQ&usg=AFQjCNFPmCXITLZFHlmL0XotkhrO8YRVEQ

janarioo said:
the kernel wont have higer speeds try bricked kernel n cpu master free
Sent from my Sensation using xda premium
Click to expand...
Click to collapse
I agree...with bricked kernel, you can set CPU min/max....

I tried Bricked at 1.83 and works like a charm. Tried at 1.99 but after a minute or so my phone rebooted so I'm back to the more stable 1.83 and the battery is amazing!
Sent from my HTC Sensation XE using Tapatalk 2

Can i OC phone to 1400MHz?

On LG l3 II (have the samy cpu) i can overclock it to 1400. Can i OC htc pico to 1400MHz?? It's posibble?
Ps: I know i can burn my nand but this is only question.

it wld nt only burn ur nand..also ur phone will b burnt.. :laugh:

check this video out dude i think its possible

vijnathin said:
check this video out dude i think its possible
Click to expand...
Click to collapse
try your luck with pandora extreme kernel..it supports overclock upto 900mhz..& I think cranium kernel 1.3ghz overclock is fake(no offense to the developer) because it gives lower benchmark as compared to pll2 overclock kernels.

Try it
You can try it one last time... (I think)

Now i Oc my phone to 844MHz. It's possible to OC the phone up to 1300MHz? My phone don't will burn?

michal16 said:
Now i Oc my phone to 844MHz. It's possible to OC the phone up to 1300MHz? My phone don't will burn?
Click to expand...
Click to collapse
you can use cranium kernel with jaggyrom, it'll work but the performance won't be as good as you're getting now because this is pll2 true overclock you are using now..you're lucky you got your pico working stable @844mhz, mine can't go above 767mhz.

I think its not possible ,i checked the specification of MSM 7225A chipsets,the maximum cpu clock frequency for them is 800 Mhz (official) u can overclock them a bit but 1400 Mhz is too high ....
sent from
little pico

Look at the LG l3 II. This phone have the same CPU and have 1GHz. On this phone you can overclock up to 1400MHz.
Ok i don't will test I have SDHC class 4 but i can OC up to 844MHz strange
I have next question(i didn't want doing spam) My phone is increasingly slowly. I think its NAND. I OC my ophone only one of week (on one hour) and normally working at 600 MHz. What i can do?

Ok. I have aries kernel with one partion and this laggy. Now i shearch kernel for CM10.1. I have only one partion made in recovery and this kernel must overclock pll2

michal16 said:
Ok. I have aries kernel with one partion and this laggy. Now i shearch kernel for CM10.1. I have only one partion made in recovery and this kernel must overclock pll2
Click to expand...
Click to collapse
use two external partitions for pll2 overclocking..why can't you follow developer's instruction?

i can't do it.