Hello world. I'm running faux 004 but when I try to mess with my CPU limits with SetCpu etc. It only goes up to 1.51. What do I have to do to make higher speeds available?
FrenzyGr said:
Hello world. I'm running faux 004 but when I try to mess with my CPU limits with SetCpu etc. It only goes up to 1.51. What do I have to do to make higher speeds available?
Click to expand...
Click to collapse
the kernel wont have higer speeds try bricked kernel n cpu master free
Sent from my Sensation using xda premium
FrenzyGr said:
Hello world. I'm running faux 004 but when I try to mess with my CPU limits with SetCpu etc. It only goes up to 1.51. What do I have to do to make higher speeds available?
Click to expand...
Click to collapse
try system tuner to overclock your processor...it works with faux 004 (also if you want performance change the governer to ondemand. its possible with system tuner too)
janarioo said:
the kernel wont have higer speeds try bricked kernel n cpu master free
Sent from my Sensation using xda premium
Click to expand...
Click to collapse
Each kernel has a range of frequencies built in, check the specification before you flash to get the range you want. All of the CPU management apps can only work within the ranges defined in the kernel.
sent from HTC Pyramid using Tapatalk 2
Try the new Bricked kernel. You can easily set the maximum and minimum frequencies simply by renaming the ZIP file. Use Recovery to flash. Setting CPU frequencies was never that easy!
I would say try bricked (like aayush mentioned). As he said, you can change the clock speeds by renaming the zip file (up to 1,944 Ghz, but only if your phone can handle it, so I would suggest that you first use "System Tuner" to test how high you can go with oc).
try searching for a kernel that supports hiigher clock rate
for example when flashing arhd it asks you about the kernel you want and not sure wich one can go to 1.7ghz or more
http://www.google.com/url?sa=t&rct=...xOjqCQ&usg=AFQjCNFPmCXITLZFHlmL0XotkhrO8YRVEQ
janarioo said:
the kernel wont have higer speeds try bricked kernel n cpu master free
Sent from my Sensation using xda premium
Click to expand...
Click to collapse
I agree...with bricked kernel, you can set CPU min/max....
I tried Bricked at 1.83 and works like a charm. Tried at 1.99 but after a minute or so my phone rebooted so I'm back to the more stable 1.83 and the battery is amazing!
Sent from my HTC Sensation XE using Tapatalk 2
Related
I use the SetCPU on the HTC Sensation 4G, it looks like it only scaling the cpu0. I am overclocking it to 1.5GHz but when I query the cpu frequency I don't see it on cpu1.
can somebody run the fallowing lines on adb shell to see if the scaling works for you?
Code:
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq
cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_cur_freq
cpu0 gives 1512000 for me but cpu1 gives 1188000
ps cpu1 goes idle and this file becomes unavaliable, I run linpack run multi-thread just before I query the cpu1.
Sent from my HTC Sensation 4G using XDA App
How did you even get the Setcpu to recognize the sensation's 1.2ghz? How did you detect the device?!
Knucklessg1 said:
How did you even get the Setcpu to recognize the sensation's 1.2ghz? How did you detect the device?!
Click to expand...
Click to collapse
Custom kernel but setcpu definitely isn't working right with them either. Still not 100% compatible with our asynchronous cpu.
Sent from my Leedroided Htc Sensation 4g!
dr.m0x said:
Custom kernel but setcpu definitely isn't working right with them either. Still not 100% compatible with our asynchronous cpu.
Sent from my Leedroided Htc Sensation 4g!
Click to expand...
Click to collapse
I have a custom kernel that supports 1.8ghz. but setcpu only allows 998 to be the maximum when i click nexus one/snapdragon. I don't know what other options i have.
If you have a custom kernel that supports it (most do i think) setcpu should have an option to autodetect. You shouldn't have to select a device. If autodetect isn't available try uninstalling setcpu and reinstalling it. None of the device selections will work for us because our device/chipset isn't supported for manual selection (yet).
If You're using a custom kernel then delete set cpu and use an OC Daemon like the Virtuous Daemon with Unity Kernel or user Android Rev HD and Mike's OC Daemon with any compatible custom kernel -- which depends on if you're using a 2.3.3 or a 2.3.4 ROM.
How that helps d0oD
Sent from my HTC Sensation Z710e using XDA Premium App
BonesRed said:
If You're using a custom kernel then delete set cpu and use an OC Daemon like the Virtuous Daemon with Unity Kernel or user Android Rev HD and Mike's OC Daemon with any compatible custom kernel -- which depends on if you're using a 2.3.3 or a 2.3.4 ROM.
How that helps d0oD
Sent from my HTC Sensation Z710e using XDA Premium App
Click to expand...
Click to collapse
How easy is it to employ the OC Daemon and a kernal for it? Is it something we can just DL to out SD card?
Yes Dude, just flash a custom rom. If you're on a 2.3.3 based rom there's plenty of custom kernels and if you're on a 2.3.4 based rom just flash The Unity V6 or V7 kernel which should come with the virtuous OVERCLOCK Daemon included as part of the flashable.zip that you can find in the Leedroid ROM's thread in development.
Sent from my HTC Sensation 4G using XDA Premium App
BonesRed said:
If You're using a custom kernel then delete set cpu and use an OC Daemon like the Virtuous Daemon with Unity Kernel or user Android Rev HD and Mike's OC Daemon with any compatible custom kernel -- which depends on if you're using a 2.3.3 or a 2.3.4 ROM.
How that helps d0oD
Sent from my HTC Sensation Z710e using XDA Premium App
Click to expand...
Click to collapse
Great info, thanks.
Btw, love your avatar.
Sent from my HTC Glacier using XDA Premium App
I just set OC to 1890Mhz
Cpu0 is at 1890
and when i ran linpack and got Cpu1 it was only at 1188.
Unity V5 on Senseless 1.3
I found this out before SOFF with the kernel module insmod. Even with the virtusous_oc demon, it still not working. I'm using 2.3.4 kernel with smartass, I wonder if that works on second core.
Sent from my HTC Sensation Z710e using XDA App
I just checked with insert coin 2.3.4 rom scaling governor of the cpu0 is smartass and governor of cpu1 is ondemand. I guess that does not work either.
cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
Sent from my HTC Sensation Z710e using XDA App
haha, I bet this phone is a single core really with a bit HTC fakery... could be why the cpu benchmarks are so bad lol
anarchyuk said:
haha, I bet this phone is a single core really with a bit HTC fakery... could be why the cpu benchmarks are so bad lol
Click to expand...
Click to collapse
hahaha, they also said its unibody when in fact its not...
Come on we need further testing, need to know the KERNEL, ROM, and what app you are using to control the CPU. CF-Bench is a longer test that stresses both cores.
If you look a the thread with Faux this is an issue with the ROMs or the OC apps, not the CPU, which the CPU in the phone is one of the only ones with an ASYMMETRIC CPU, meaning that the cores do not sync or lock to one another.
I am using set cpu with the unity v7 kernel and it works fine I am over clocked to 1.7ghz at full, when battery gets low goes down to 700mhz, when screen off about 500 mhz
when using stock kernal I used a manual settings using setCPU.txt obv cant over clock it but could under volt it to save battery when screen was off... if anybody wants my set cpu profile (txt file) I still have it floating about
you know what here is the file
place the file on the root of your sd card and in set cpu select manful from the device list.
remember stock kernel = no overclock but happy under clocking
Kurisu87 said:
I am using set cpu with the unity v7 kernel and it works fine I am over clocked to 1.7ghz at full, when battery gets low goes down to 700mhz, when screen off about 500 mhz
when using stock kernal I used a manual settings using setCPU.txt obv cant over clock it but could under volt it to save battery when screen was off... if anybody wants my set cpu profile (txt file) I still have it floating about
Click to expand...
Click to collapse
Kurisu87 said:
you know what here is the file
place the file on the root of your sd card and in set cpu select manful from the device list.
remember stock kernel = no overclock but happy under clocking
Click to expand...
Click to collapse
Ok you can't apparently pay attention to the point of this thread, all CPU apps, CPU Master, SetCPU, Virtuous Overclock all are able to overclock my CPU with the custom kernels, the problem is not me being able to overclock or not, its been tested by me many times with other kernels as well, and the OP that the Second Core is not sync and also not being modified by the governor as well. So all the CPU apps are only controlling the single core.
Does anybody tried CPU Master ? I think it's the OC utility that coredroid ROM suggest...
MasterKaiser said:
Does anybody tried CPU Master ? I think it's the OC utility that coredroid ROM suggest...
Click to expand...
Click to collapse
same problem exists, you can look at my discussion with Faux123
http://forum.xda-developers.com/showthread.php?t=1216197&page=7
ok guys i dont know weather its me or not
but i had flashed some kernals the are 1.5ghz but my quadrant score wont go up than 3010 highest i got.
some people on youtube shows them more than 5000 so i was wonder what was i doing wrong
at the moment im running CM7 lates build 158
and i notice some kernals wont work with lates buil
what kernals can i flash to overclock my phone as fastest?
and how.
thanks in advance
Try the cm oc/uv 0.4.2 kernel by faux, install setcpu (free to members here, don't have link at the moment). Inside setcpu is where you adjust the kernel speeds. From what I've noticed, a custom kernel will be clocked around the normal kernel speed (stability reasons maybe) so even with custom kernels your not running as fast as you can.
Sent from my LG-P999 using xda premium
wgrant said:
Try the cm oc/uv 0.4.2 kernel by faux, install setcpu (free to members here, don't have link at the moment). Inside setcpu is where you adjust the kernel speeds. From what I've noticed, a custom kernel will be clocked around the normal kernel speed (stability reasons maybe) so even with custom kernels your not running as fast as you can.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
i done the setcpu all the way to 1000 but it didnt seems to helped. i didnt go into profiles cause i dont know what im doing in there.
What kernel are you using? You have to use a custom kernel to overclock. Setcpu will detect the settings created by the person that made the kernel and allow higher settings. With the kernel I suggested you can go up to 1.55ghz
Sent from my LG-P999 using xda premium
i have 1.4.1 first link kernel!!!!(no open sensation.. touch fix..)
in every software like antutu benchmark show my CPU 1.5 and...!!!
kernel is 1.781?? why?
kamranhaghighi said:
i have 1.4.1 first link kernel!!!!(no open sensation.. touch fix..)
in every software like antutu benchmark show my CPU 1.5 and...!!!
kernel is 1.781?? why?
Click to expand...
Click to collapse
And what ? I don't understand what your trying to explain...
Sent from my HTC Sensation Z710e using xda premium
kamranhaghighi said:
i have 1.4.1 first link kernel!!!!(no open sensation.. touch fix..)
in every software like antutu benchmark show my CPU 1.5 and...!!!
kernel is 1.781?? why?
Click to expand...
Click to collapse
Because you need to use a program (like setcpu) to control the clock speed.
GROGG88 said:
Because you need to use a program (like setcpu) to control the clock speed.
Click to expand...
Click to collapse
Ohh that's what he meant yeah or you can use cpu tuner ..
Sent from my HTC Sensation Z710e using xda premium
the kernel auto set CPU freq 1.5 and 1.8 !!!
when my phone get heat it auto go down into 1.5 (i see in kernel page!)
and my phone hangs when i using cputuner and set cpu to 1.8!
you're annoying stop using "!" if you dont want that kernel then create your own. .
kamranhaghighi said:
the kernel auto set CPU freq 1.5 and 1.8 !!!
when my phone get heat it auto go down into 1.5 (i see in kernel page!)
and my phone hangs when i using cputuner and set cpu to 1.8!
Click to expand...
Click to collapse
I think you need to read more about it.... That means your phone cant handle 1.8 if it hangs.... Some phones can handle it some phones cant...
Sent from my HTC Sensation using Tapatalk
Can i use No frills CPU or any other cpu controller with stock rom and kernel?
Yes I believe you can as long as your rooted.
Sent from my HTC Sensation 4G
Yes, you can. However you won't be able to overclock anything since the stock kernel doesn't support that. You can only change governors and I/O scedulers. If you want to stay on the stock kernel but have the ability to overclock/undervolt, you can try SebastianFM's kernels.
I also tried to overclock my CPU with stock kernel. Is does not work and changing the governors just makes the phone a bit slower for me cause the kernel doesn't really support is. Try senseomaniac rom, has the bricked kernel. I am using now and works great.
Welsyntoffie said:
I also tried to overclock my CPU with stock kernel. Is does not work and changing the governors just makes the phone a bit slower for me cause the kernel doesn't really support is. Try senseomaniac rom, has the bricked kernel. I am using now and works great.
Click to expand...
Click to collapse
You don't have to change ROM to use another kernel . If changing the governors makes your phone slower, you probably tried 'conservative' or 'powersave'.
Yeah I know for only changing kernel, but is much easier to flask complete rom then only kernel, kernels differ and are many for different phone roms made for spicific phone then kernel will work. I had screen off governor set to 1cpu and 192 fq, made the unlock slow
Sent from my Sensation Z710e using xda app-developers app
V1k70r said:
Yes, you can. However you won't be able to overclock anything since the stock kernel doesn't support that. You can only change governors and I/O scedulers. If you want to stay on the stock kernel but have the ability to overclock/undervolt, you can try SebastianFM's kernels.
Click to expand...
Click to collapse
No i was unable to use No frills, i set min to 192Mhz, in the application it says 192Mhz but actually it stays at 384Mhz.
I think he meant stock rom. You need a custom kernel to change the frequencies and voltage, that includes lowering the lowest possible frequency (384 to 192).
Yes, i apologise, min was 384. Didnt pay much attention to the numbers
I have been unsuccessful on being able to get CPU settings to stick. I am on clean kernel and its overclockabke up to 1.9, and the low side can be under clocked to 192, with default being 384.
I personally want mine to stick at 192 low and 1728 high...and it does for maybe 5 minutes, then its back to the CPU wide open at 1.9 and low 384.
What can I do to get my settings to stick? I have set on boot checked.
Sent from my HTC One X using xda app-developers app
most early kernels were made to run at the creators best stable overclock. i would use a newer kernel that might have more inherent flexibility such as the new beastmode v4 or ElementalX which might allow you to get a stable overclock at frequencies lower then max.
DvineLord said:
most early kernels were made to run at the creators best stable overclock. i would use a newer kernel that might have more inherent flexibility such as the new beastmode v4 or ElementalX which might allow you to get a stable overclock at frequencies lower then max.
Click to expand...
Click to collapse
Has beastmode setup where I can pull only the boot.IMG out yet?
Sent from my HTC One X using xda app-developers app
joho5 said:
Has beastmode setup where I can pull only the boot.IMG out yet?
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Negative on Beastmode v4. I'm still trying to figure out how to flash that kernel.
In the mean time, I've flashed ElementalX v1.14. So far, settings have stuck, and I'm using kernel tuner.
No frills CPU app works very well for me. Kernel tuner was unable to keep my settings where i wanted them.
Sent from my One X using xda premium