On LG l3 II (have the samy cpu) i can overclock it to 1400. Can i OC htc pico to 1400MHz?? It's posibble?
Ps: I know i can burn my nand but this is only question.
it wld nt only burn ur nand..also ur phone will b burnt.. :laugh:
check this video out dude i think its possible
vijnathin said:
check this video out dude i think its possible
Click to expand...
Click to collapse
try your luck with pandora extreme kernel..it supports overclock upto 900mhz..& I think cranium kernel 1.3ghz overclock is fake(no offense to the developer) because it gives lower benchmark as compared to pll2 overclock kernels.
Try it
You can try it one last time... (I think)
Now i Oc my phone to 844MHz. It's possible to OC the phone up to 1300MHz? My phone don't will burn?
michal16 said:
Now i Oc my phone to 844MHz. It's possible to OC the phone up to 1300MHz? My phone don't will burn?
Click to expand...
Click to collapse
you can use cranium kernel with jaggyrom, it'll work but the performance won't be as good as you're getting now because this is pll2 true overclock you are using now..you're lucky you got your pico working stable @844mhz, mine can't go above 767mhz.
I think its not possible ,i checked the specification of MSM 7225A chipsets,the maximum cpu clock frequency for them is 800 Mhz (official) u can overclock them a bit but 1400 Mhz is too high ....
sent from
little pico
Look at the LG l3 II. This phone have the same CPU and have 1GHz. On this phone you can overclock up to 1400MHz.
Ok i don't will test I have SDHC class 4 but i can OC up to 844MHz strange
I have next question(i didn't want doing spam) My phone is increasingly slowly. I think its NAND. I OC my ophone only one of week (on one hour) and normally working at 600 MHz. What i can do?
Ok. I have aries kernel with one partion and this laggy. Now i shearch kernel for CM10.1. I have only one partion made in recovery and this kernel must overclock pll2
michal16 said:
Ok. I have aries kernel with one partion and this laggy. Now i shearch kernel for CM10.1. I have only one partion made in recovery and this kernel must overclock pll2
Click to expand...
Click to collapse
use two external partitions for pll2 overclocking..why can't you follow developer's instruction?
i can't do it.
Related
hye folks,
i have rooted my asus transformer and installed prime1,9. I also tested the psx emulator with tekken 3 but the games lags so i thougt to increase the cpu from 1 ghz to 1,2 ghz can some tell what i have to do ..
abati said:
hye folks,
i have rooted my asus transformer and installed prime1,9. I also tested the psx emulator with tekken 3 but the games lags so i thougt to increase the cpu from 1 ghz to 1,2 ghz can some tell what i have to do ..
Click to expand...
Click to collapse
Use the seach button and read the kernel threads.
Rule #1
dude i searched allot but i only found kernels for 1,4 ghz or 1,6 ghz i realy need 1,2 cus that is the one that is most stable
dude i searched allot but i only found kernels for 1,4 ghz or 1,6 ghz i realy need 1,2 cus that is the one that is most stable
abati said:
dude i searched allot but i only found kernels for 1,4 ghz or 1,6 ghz i realy need 1,2 cus that is the one that is most stable
Click to expand...
Click to collapse
You set the kernel speed to what you want with setcpu or something like it. These kernels tell you what the max is. You can set it however you want.
You obviously have no understanding or concept of what you want to do.
Therefore i suggest you dont do it.
i know exactly want i want, but it is so confusing cus i followed this how to
http://eeepadhacks.net/transformer-hacks/how-to-overclock-your-eeepad-transformer-to-1-6ghz/
after i installed the kernel and rebooted it freezed and i rebooted several times but it kept freezing.
So can you offer me some help so that i can overclock tot 1,2 ghz
flashing kernels is easy, making sure they're compatible can be tough. for you running Prime 1.9 I suggest clemsyns latest kernel. I think he's up to 21 now. you can find his tread in development. just also know that if the kernel flashing doesn't go well you can always reflash your rom to return to a kernel that works. once your new kernel is installed you need to install an app to regulate your CPU frequencies. I recommend setcpu which can be acquired on xda for free. I'm not going to post the link, just search for it, I believe its in android general forums. other than that you can search the market for overclock and choose from the many options available, just know that some programs might not work for the transformer.
EDIT: make sure to get clemsyns "b" kernel unless you have installed voodoo sound separately.
thnxx for the replay i wiil try the other romm
abati said:
dude i searched allot but i only found kernels for 1,4 ghz or 1,6 ghz i realy need 1,2 cus that is the one that is most stable
Click to expand...
Click to collapse
Depends. In my case using Prime 1.9.1 with the "official" overclock kernel I can use in perfect stability 1.6ghz. Last time I gave a try to a clemsyns kernel (v9 maybe?) I could get stability only up to 1.2ghz..... it kinda varies between the kernel, rom and specific machine as some might work better than others.
Also as already said, just get a kernel that works with your rom and set it at the clock you want using SetCPU or another app.
Great work ! you helped me all out, now i overclocked to 1,2 ghz succesfully and i can play tekken 3 without any lag thnx to you !
Hey people today I flash UC Kernel V08 NOC to my phone DDKP2 2.3.6 but I was not able to see improvement in video recording. I saw in the comments that Chaos and team has fixed only V08 Overclocked version. So i was thinkin why not overclock my phone and then flash OC version.
My question is I have installed NO FRILLS CPU Control.. I Wanted to know what setting should i keep on it and then should I flash V08 OC version! Thanks
anuragvivek93 said:
Hey people today I flash UC Kernel V08 NOC to my phone DDKP2 2.3.6 but I was not able to see improvement in video recording. I saw in the comments that Chaos and team has fixed only V08 Overclocked version. So i was thinkin why not overclock my phone and then flash OC version.
My question is I have installed NO FRILLS CPU Control.. I Wanted to know what setting should i keep on it and then should I flash V08 OC version! Thanks
Click to expand...
Click to collapse
max freq - 1200 mhz
min freq - 300 mhz
i/o schedular - sio
governer - smartassv2
dont set 200 mhz min freq. Phone will freeze.
ok after that can i flash v08 ov version over noc version??
anuragvivek93 said:
ok after that can i flash v08 ov version over noc version??
Click to expand...
Click to collapse
@Dude, Yes you can flash OC version over NOC version - but i believe that currently NOC version is more stable than OC ; However OC will definitely give an inch over NOC in performance.
but in the uc kernel thread I saw that fix has been done for OC version whereas for NONOC version there is not fix....
vishal24387 said:
max freq - 1200 mhz
min freq - 300 mhz
i/o schedular - sio
governer - smartassv2
dont set 200 mhz min freq. Phone will freeze.
Click to expand...
Click to collapse
hey i am only gettin 1.0 mhz option in No frills! what to do!
anuragvivek93 said:
hey i am only gettin 1.0 mhz option in No frills! what to do!
Click to expand...
Click to collapse
buddy first flash OC v08 version & then do that settings. Its so simple...
hi vishal is overclocking harmful to d phone?
also tell me can i get back ti original stock kernel by just flashing stock firmware:xxkpe-->xxkpq.?
burninghouse said:
hi vishal is overclocking harmful to d phone?
also tell me can i get back ti original stock kernel by just flashing stock firmware:xxkpe-->xxkpq.?
Click to expand...
Click to collapse
yes and yes
Agreed.. and Iam Still thinking why do we need 1.2 OC???? anyone?!?!?!
Well, after installing Sch ROM, ICS Theme, and UC-Kernel v8 with OC everything is running super smooth. I'm able to play Dungeon Defenders on highest graphics quality (which is in fact native screen resolution), although my quadrant benchmark has dropped from 2600/2800 to 1500.
Why not? Of course it would be better to have some more frequencys to choose from and i would like to also have additional 1000 MHz as a frequency the CPU is clocked maximum in standard situations and only manually "overclock" to 1.2 GHz in example for gaming.
1.2 ОС-is the speed!
to fasten our phone! althoug I have overcloked but not able to see any major overhaul!
to fasten our phone! althoug I have overcloked but not able to see any major overhaul!
Click to expand...
Click to collapse
have you enabled a cpu managing app like Nofrills CPU control?
you wont really recognize the improvement in daily usage, try out a HD game like asphalt, you WILL fell the difference, (in performance as in battery drain^^)
i got this problem when i used Creeds 3.0 and no frills to overclocked to 806 Hhz, with conservative govenor and I/o scheduler : deadline.... i got a loud beep and my phone hung... though i remove the battery adn rebooted and it worked.... so i tried on 787 mhz adn the phone again hung?
Am i doing something wrong ? Please help
Looks like your phone can't handle the overclock.
i have a samsung galaxy fit and it can be easily overclocked over 800 mhz in other custom Roms
Raval Kaushal said:
i have a samsung galaxy fit and it can be easily overclocked over 800 mhz in other custom Roms
Click to expand...
Click to collapse
well this rom cant handle it, thats all just find the oc that is stable
hmm... i thought it could be that ... something to do with cf files
might not be the rom so much as the kernel it comes with. If u like ur current rom flash a different kernel
I have an LG P920 (30a) with stock android 4.0.4 but rooted., please recomand me an kernel with overclock , i have try some kernels but im not satisfied, the phone still have lag.
mkiller88 said:
I have an LG P920 (30a) with stock android 4.0.4 but rooted., please recomand me an kernel with overclock , i have try some kernels but im not satisfied, the phone still have lag.
Click to expand...
Click to collapse
try this for lags http://forum.xda-developers.com/showthread.php?t=1987032
chewingum16 said:
try this for lags http://forum.xda-developers.com/showthread.php?t=1987032
Click to expand...
Click to collapse
I want an kernel with overclock option on GPU and CPU, i have try an kernel that say its overclocking the gpu at 442Mhz , but in antutu and qadrant i can see the difference between the kernel with 386Mhz gpu overclock , in all kernels the cpu was clocked at 1400mhz and profile set to performance and I/O to deadline .
In Minion rush or Plants Vs Zombies i have to wait a lot of time until the games are loading.
Now i have buy and 8Gb mem card Class 10 and i will try to partition that card in ext4 and make an Swap of 2Gb.
ps: i have try seeder 2.0 but it says it can not start because it dose not have root acces , but i have granded the acces in Su.
mkiller88 said:
I want an kernel with overclock option on GPU and CPU, i have try an kernel that say its overclocking the gpu at 442Mhz , but in antutu and qadrant i can see the difference between the kernel with 386Mhz gpu overclock , in all kernels the cpu was clocked at 1400mhz and profile set to performance and I/O to deadline .
In Minion rush or Plants Vs Zombies i have to wait a lot of time until the games are loading.
Now i have buy and 8Gb mem card Class 10 and i will try to partition that card in ext4 and make an Swamp of 2Gb.
ps: i have try seeder 2.0 but it says it can not start because it dose not have root acces , but i have granded the acces in Su.
Click to expand...
Click to collapse
remove all ****ty programs that offer you performance !!!
do not make SWAP files
tell us what kind of kernel you already use and what you are not satisfied - exactly. What kind of programs you use all the time and the most used programs and features for you. then we can start thinking about your lag.
OC does not bring you much. especially in benchmarking. I suppose in your case you have many background services and wakelocks.
p-vlad said:
remove all ****ty programs that offer you performance !!!
Click to expand...
Click to collapse
I have flashed the PH85 KERNEL ICS-1.zip kernel, before this i have try others kernel (PH85 KERNEL v1.1.8-496iva-483gpu-486ram.zip , kernelICSV28b_V1.1.zip ,Kernel_Next_V4.zip ,Shazo's Kernel.zip,bluekernel_for_p920_v120.zip,),i have used PIMP my room to tweek the phone.
I have flashed the PurePerformances™X_CM.1.4.zip , but with no results.
mkiller88 said:
I have flashed the PH85 KERNEL ICS-1.zip kernel, before this i have try others kernel (PH85 KERNEL v1.1.8-496iva-483gpu-486ram.zip , kernelICSV28b_V1.1.zip ,Kernel_Next_V4.zip ,Shazo's Kernel.zip,bluekernel_for_p920_v120.zip,),i have used PIMP my room to tweek the phone.
I have flashed the PurePerformances™X_CM.1.4.zip , but with no results.
Click to expand...
Click to collapse
my post has more questions...
Hi i need overclock kernel for CM 10.1. I have SDcard class 4. Please help me :crying: :crying: :crying: :crying:
michal16 said:
Hi i need overclock kernel for CM 10.1. I have SDcard class 4. Please help me :crying: :crying: :crying: :crying:
Click to expand...
Click to collapse
Hi there mate,i have a class 4 sd card too, you can use jarvis, pandora kernels, but i recommend you aries kernel which has the best performance (for me). Hope i helped you
Thanks but i will not have lags? Pandora have lags on 600MHz. When i use jaggyRom on 600MHz i not have lags. When i use setcpu and i set 900MHz the phone reboot why?. I need more MHz because i record video on YouTube
michal16 said:
Thanks but i will not have lags? Pandora have lags on 600MHz. When i use jaggyRom on 600MHz i not have lags. When i use setcpu and i set 900MHz the phone reboot why?. I need more MHz because i record video on YouTube
Click to expand...
Click to collapse
I havent got any lags with Aries kernel on 828 mhz i think, and yes, your pico reboots cause you have class 4 sd card and the class 4 supports upto 828-868 mhz. I dont know why but class 4 sd cards just dont support 878 and 900 mhz, its freakin' weird but the pll2 method its created that way :/
EDIT: Dont say thanks, just hit the THANKS button under any post that helped you "so i can become more famous, MUHAHAHA "
What does the OC in kernels? What is this?
I will test it when make Gapps to CM 10.1
michal16 said:
What does the OC in kernels? What is this?
I will test it when make Gapps to CM 10.1
Click to expand...
Click to collapse
The oc kernels make your device's cpu overclockable, the aries kernel is a kernel posted in original android development for pico and why would you make gapps for cm10.1 it already has xD
I no making i wait for gapps.
Gapps: I will upload special gapps later.Full package will NOT WORK
Click to expand...
Click to collapse
The gapps for CM 10.1 not exist
Unofficial Thread
Do you have gapps for CM 10.1?
michal16 said:
Do you have gapps for CM 10.1?
Click to expand...
Click to collapse
Your english is a little confusing but you will get it, here's a link for gapps cm10.1 http://www.androidfilehost.com/?fid=9390248398092763478, i've tested it and its working
EDIT: Download cm10.1 latest build that you've posted and flash gapps. You can even use oc kernel if you want great performance.
I come from Polish Thank you very much
I must install kernel after CM or earlier? Gapps last?
what kernel i have to get? OC or no-OC?
michal16 said:
I come from Polish Thank you very much
I must install kernel after CM or earlier? Gapps last?
Click to expand...
Click to collapse
Order: cm -> gapps -> kernel, you can use the aries non-oc kernel given in cm10.1 build 5 or you can use aries oc kernel, make your choise and feel free to give me questions.
Thanks
When i use OC kernel i have laags. When i use NO-OC i will not have lags?
When i set 878 the phone reboot and reboot and i have to reinstall rom. Why?
michal16 said:
When i use OC kernel i have laags. When i use NO-OC i will not have lags?
When i set 878 the phone reboot and reboot and i have to reinstall rom. Why?
Click to expand...
Click to collapse
I dont have lags with aries oc - 828 mhz, lulzactive or smartassv2, and it reboots cause class 4 sd cards dont support 878 and 900 mhz.
When i use NO-OC i will not have lags?
Click to expand...
Click to collapse
Can you anserw the question??
Usually with oc kernel you'll have better performance and less lags, with non-oc you will have more lags, try both if not sure or use aries oc kernel with min freq 122 mhz and max 600 mhz = non-oc, min freq 122 mhz and max 822 mhz = oc.
I must use OC if i want 822? NO-OC have max 600MHZ?
____________________________________________________
When i use jaggyrom i set 320MHz and i don't have lags. When i use cM 10.1 and aries i have lags.
michal16 said:
I must use OC if i want 822? NO-OC have max 600MHZ?
____________________________________________________
When i use jaggyrom i set 320MHz and i don't have lags. When i use cM 10.1 and aries i have lags.
Click to expand...
Click to collapse
Yes, thats right
I dont know, jaggyrom is with android 2.3.5, this is 4.2.2, older = smoother but with the new pll2 oc method by cute_prince it shouldn't have lags.
Do you make the 2 partitions, order SD-DATA(1gb)->SD-CACHE(60-70 mb)?
michal16 said:
I must install kernel after CM or earlier? Gapps last?
Click to expand...
Click to collapse
You have to flash cm then gapps and at last kernel. Hit thanks if I helped you
Sent from my HTC Explorer A310e using xda premium