Hi i need overclock kernel for CM 10.1. I have SDcard class 4. Please help me :crying: :crying: :crying: :crying:
michal16 said:
Hi i need overclock kernel for CM 10.1. I have SDcard class 4. Please help me :crying: :crying: :crying: :crying:
Click to expand...
Click to collapse
Hi there mate,i have a class 4 sd card too, you can use jarvis, pandora kernels, but i recommend you aries kernel which has the best performance (for me). Hope i helped you
Thanks but i will not have lags? Pandora have lags on 600MHz. When i use jaggyRom on 600MHz i not have lags. When i use setcpu and i set 900MHz the phone reboot why?. I need more MHz because i record video on YouTube
michal16 said:
Thanks but i will not have lags? Pandora have lags on 600MHz. When i use jaggyRom on 600MHz i not have lags. When i use setcpu and i set 900MHz the phone reboot why?. I need more MHz because i record video on YouTube
Click to expand...
Click to collapse
I havent got any lags with Aries kernel on 828 mhz i think, and yes, your pico reboots cause you have class 4 sd card and the class 4 supports upto 828-868 mhz. I dont know why but class 4 sd cards just dont support 878 and 900 mhz, its freakin' weird but the pll2 method its created that way :/
EDIT: Dont say thanks, just hit the THANKS button under any post that helped you "so i can become more famous, MUHAHAHA "
What does the OC in kernels? What is this?
I will test it when make Gapps to CM 10.1
michal16 said:
What does the OC in kernels? What is this?
I will test it when make Gapps to CM 10.1
Click to expand...
Click to collapse
The oc kernels make your device's cpu overclockable, the aries kernel is a kernel posted in original android development for pico and why would you make gapps for cm10.1 it already has xD
I no making i wait for gapps.
Gapps: I will upload special gapps later.Full package will NOT WORK
Click to expand...
Click to collapse
The gapps for CM 10.1 not exist
Unofficial Thread
Do you have gapps for CM 10.1?
michal16 said:
Do you have gapps for CM 10.1?
Click to expand...
Click to collapse
Your english is a little confusing but you will get it, here's a link for gapps cm10.1 http://www.androidfilehost.com/?fid=9390248398092763478, i've tested it and its working
EDIT: Download cm10.1 latest build that you've posted and flash gapps. You can even use oc kernel if you want great performance.
I come from Polish Thank you very much
I must install kernel after CM or earlier? Gapps last?
what kernel i have to get? OC or no-OC?
michal16 said:
I come from Polish Thank you very much
I must install kernel after CM or earlier? Gapps last?
Click to expand...
Click to collapse
Order: cm -> gapps -> kernel, you can use the aries non-oc kernel given in cm10.1 build 5 or you can use aries oc kernel, make your choise and feel free to give me questions.
Thanks
When i use OC kernel i have laags. When i use NO-OC i will not have lags?
When i set 878 the phone reboot and reboot and i have to reinstall rom. Why?
michal16 said:
When i use OC kernel i have laags. When i use NO-OC i will not have lags?
When i set 878 the phone reboot and reboot and i have to reinstall rom. Why?
Click to expand...
Click to collapse
I dont have lags with aries oc - 828 mhz, lulzactive or smartassv2, and it reboots cause class 4 sd cards dont support 878 and 900 mhz.
When i use NO-OC i will not have lags?
Click to expand...
Click to collapse
Can you anserw the question??
Usually with oc kernel you'll have better performance and less lags, with non-oc you will have more lags, try both if not sure or use aries oc kernel with min freq 122 mhz and max 600 mhz = non-oc, min freq 122 mhz and max 822 mhz = oc.
I must use OC if i want 822? NO-OC have max 600MHZ?
____________________________________________________
When i use jaggyrom i set 320MHz and i don't have lags. When i use cM 10.1 and aries i have lags.
michal16 said:
I must use OC if i want 822? NO-OC have max 600MHZ?
____________________________________________________
When i use jaggyrom i set 320MHz and i don't have lags. When i use cM 10.1 and aries i have lags.
Click to expand...
Click to collapse
Yes, thats right
I dont know, jaggyrom is with android 2.3.5, this is 4.2.2, older = smoother but with the new pll2 oc method by cute_prince it shouldn't have lags.
Do you make the 2 partitions, order SD-DATA(1gb)->SD-CACHE(60-70 mb)?
michal16 said:
I must install kernel after CM or earlier? Gapps last?
Click to expand...
Click to collapse
You have to flash cm then gapps and at last kernel. Hit thanks if I helped you
Sent from my HTC Explorer A310e using xda premium
Related
Hello xda forums, I've done a lot of research and I can't find anything conclusive about this issue...
How do I flash a new kernel on my asus tf300t with custom rom cm10.1 nightlies? I want to do this because I can't overclock over 1.3 ghz .
I'm really happy with this rom on performence mode , but in heavier games like gta vice city it still lags a lot, so I'm guessing higher freq > better gamming experience. Please help this poor child :'( . And if I'm reposting or something, u have my sincere apologies.
Thank u so much for the help and I hope this post can help as many as possible.
Are you able to reboot into recovery mode? (Hold power, press reboot and select recovery)
If you can, just download the custom kernel .zip file and go back to recovery. Select 'install zip from sdcard', browse to and select the downloaded kernel.. reboot and enjoy
Sent from my LT18i
I use Cyanogenmod 10.1, CM's kernel is so good. Problem is in I/O. If you don't want to your apps lagging, you will have to move your apps to MicroSD class 10
zaki0saad said:
Are you able to reboot into recovery mode? (Hold power, press reboot and select recovery)
If you can, just download the custom kernel .zip file and go back to recovery. Select 'install zip from sdcard', browse to and select the downloaded kernel.. reboott from my LT18i
Click to expand...
Click to collapse
Hey man, my tablet is rooted and I have cwm recovery installed, so i can boot up the tablet and acess the cwm menu via powerbtn+vol down.
So yes I can flash roms and kernels, but now I ask?? Can I install any kernel having already cm10.1 installed?? If not please give me a list of safe kernels i can install changing cm10.1 kernel on my tf300t.
If this method is to risky maybe I should install other rom with higher costumable overcklock? If yes please recommend roms with overclock ranges higher than 1.3 ghz.
Thank u for ur help
absinto10 said:
Hey man, my tablet is rooted and I have cwm recovery installed, so i can boot up the tablet and acess the cwm menu via powerbtn+vol down.
So yes I can flash roms and kernels, but now I ask?? Can I install any kernel having already cm10.1 installed?? If not please give me a list of safe kernels i can install changing cm10.1 kernel on my tf300t.
If this method is to risky maybe I should install other rom with higher costumable overcklock? If yes please recommend roms with overclock ranges higher than 1.3 ghz.
Thank u for ur help
Click to expand...
Click to collapse
I think there is only one kernel for CM10.1 that you can safely flash and that is Surdu's kernel, what you need to do is get your CM10 zip file and open it with 7zip and then replace the kernel .blob file inside with the one you want to flash, close the zip and reflash your ROM, only wipe cache/dalvik and you should have a new kernel.
Another option is to try Surdu's CM10.1 build with its own kernel, that what I have and it runs great.
hope that helps.
Erik
ricco333 said:
I think there is only one kernel for CM10.1 that you can safely flash and that is Surdu's kernel, what you need to do is get your CM10 zip file and open it with 7zip and then replace the kernel .blob file inside with the one you want to flash, close the zip and reflash your ROM, only wipe cache/dalvik and you should have a new kernel.
Another option is to try Surdu's CM10.1 build with its own kernel, that what I have and it runs great.
hope that helps.
Erik
Click to expand...
Click to collapse
Hey man thank u so much . Just to be sure, so i download the leatest cm10.1.zip extract, change the blob kernel of cm10.1 with surdu's kernel, zip again, flash > wipe cache and dalvik and it is done?
Is it really safe? And after this change can i go higher then 1.3 ghz?
Sorry for being annoying but I just want to be sure.
Thank u so much
absinto10 said:
Hey man thank u so much . Just to be sure, so i download the leatest cm10.1.zip extract, change the blob kernel of cm10.1 with surdu's kernel, zip again, flash > wipe cache and dalvik and it is done?
Is it really safe? And after this change can i go higher then 1.3 ghz?
Sorry for being annoying but I just want to be sure.
Thank u so much
Click to expand...
Click to collapse
Yep, just like that, all you are doing is replacing the CM10 kernel with a compatible one. and yes Surdu's CM10.1 kernel has GPU overclock and also CPU overclock to 1.7ghz.
Erik
ricco333 said:
Yep, just like that, all you are doing is replacing the CM10 kernel with a compatible one. and yes Surdu's CM10.1 kernel has GPU overclock and also CPU overclock to 1.7ghz.
Erik
Click to expand...
Click to collapse
Thank u so much man. So just replacing the blob didn't really work so I had to install Surdo's cm10.1 over my installed rom(cm10.1 too)>then wipe dalvik + cache and voila
Now I can overclock to 1.7 ghz
Source of Surdo's cm10.1 oc to 1.7 ghz for tf300t: http://forum.xda-developers.com/showthread.php?t=2112369
Thank u once again and hope this post can help others with the same issue
Perf Kernel in the dev setion works GREAT on CM10.1 4.2.2 builds. Tunable with franco.Kernel Updated app :good: GPU settings on the fly, mine's set @ 512. The tablet oozes butter, it's that smooth
Ti2 said:
Perf Kernel in the dev setion works GREAT on CM10.1 4.2.2 builds. Table with franco.Kernel Updated app :good: GPU settings on the fly, mine's set @ 512. The tabt oozes butter, it's that smooth
Click to expand...
Click to collapse
Hello man, so i finally figure it out, how to use perf kernel in cm10.1, and OMG it's so freaking amazing I've tunned up my cpu speed between 200 mhz and 1600 mhz in interactive mode, when gamming I use performance mode up 1.7ghz and 706 mhz gpu... Well I hope I'm not pushing to much of little tf300t xD
Thank u so much Ti2.
Ps. I use trickster insted of f.kernel app... Works really good too
You want to clock down good GPU a tad, I think 706 is really pushing it. Stock is ~440, standard Perf setting is 600.
Ti2 said:
You want to clock down good GPU a tad, I think 706 is really pushing it. Stock is ~440, standard Perf setting is 600.
Click to expand...
Click to collapse
Yeah you are probably right. Gpu with 706 oc it's to much and very unstable. When I play heavy games like Vice city and nova 3, the best settings I've found were 1.7ghz performance mode and gpu with standart perf settings(600mhz). So if u want a stable gamming experience on the tf300t, I would recommend this settings.
help?
Hello. I've flashed CM 10.1 and perf kernel and it oc my cpu to 1.7, which is good' but I can't find where to oc my gpu, can you help me?
hello
so i have cm 10.1 (4.2.2) and i have flashed the newest matr1x kernel to have 1.32 ghz
this is working but the phone is often reboot if i look at picures .. play a game or set settings on settings ..
what i must do pleas help me
and sorry for my bad english
Emre34 said:
hello
so i have cm 10.1 (4.2.2) and i have flashed the newest matr1x kernel to have 1.32 ghz
this is working but the phone is often reboot if i look at picures .. play a game or set settings on settings ..
what i must do pleas help me
and sorry for my bad english
Click to expand...
Click to collapse
First I think that this shouldent be in this section, but this is not my concern, second to answer your question, Matrix is one of the best kernels for Nexus S (my personal favorite is Marmite but still this is good), so I thinkl it's safe to say that this is not a kernel related issue but rather a owerclock one, be sure that there is a reason why Samsung clocked the procesor at 1GHz
Emre34 said:
hello
so i have cm 10.1 (4.2.2) and i have flashed the newest matr1x kernel to have 1.32 ghz
this is working but the phone is often reboot if i look at picures .. play a game or set settings on settings ..
what i must do pleas help me
and sorry for my bad english
Click to expand...
Click to collapse
first of all... this is written in the wrong place...
anyway, try version 24.0 of matr1x. it works on my nexus s.
the v25 of matr1x kernel is working on 1.2 normaly ...
is the marmariv or the v24 working with more clock speed ?
Emre34 said:
the v25 of matr1x kernel is working on 1.2 normaly ...
is the marmariv or the v24 working with more clock speed ?
Click to expand...
Click to collapse
marmite is more stable but it is not good for overclocking.
on matr1x v25.0 i couldnt overclock because i had the same problem with you. rebooting.
the only kernel i was able to overclock cpu without any reboot problem is matr1x v24.0 on 1320 mhz
now i am using marmite and i dont even try to overclock because i dont need more cpu power. it drains so much battery...
NickName98 said:
marmite is more stable but it is not good for overclocking.
on matr1x v25.0 i couldnt overclock because i had the same problem with you. rebooting.
the only kernel i was able to overclock cpu without any reboot problem is matr1x v24.0 on 1320 mhz
now i am using marmite and i dont even try to overclock because i dont need more cpu power. it drains so much battery...
Click to expand...
Click to collapse
thank you i have installed the v24 and do a overclock now i dont have problems
i hope i will never have been
Hi all! When i use jaggy rom i set 320MHz and i have 0 lags. when i use CM 10.1 and i write anything i have extremely lags (on 600 MHz). I have aries kernel v1 (v2 not working). And battery use is very high. With wich kernel and rom i will nave no lags and i will can set 828 MHz?
Ps: i like CM is very nice
michal16 said:
Hi all! When i use jaggy rom i set 320MHz and i have 0 lags. when i use CM 10.1 and i write anything i have extremely lags (on 600 MHz). I have aries kernel v1 (v2 not working). And battery use is very high. With wich kernel and rom i will nave no lags and i will can set 828 MHz?
Ps: i like CM is very nice
Click to expand...
Click to collapse
Maybe CM10 or CM9 with pandora or jarvis kernel but i tried them a lot of times and cant boot. Battery use will always be high i think, cause its CM10.1 and it is oc-ed.
P.S i think maybe ill try some sense (3.5 maybe) cause it boots very fast, no lags and better battery life.
for example
http://forum.xda-developers.com/showthread.php?t=2344110 i find this. this will be good?
Help me with rom and kernel i have to use?
help?
:crying:
michal16 said:
help?
:crying:
Click to expand...
Click to collapse
Use any other rom
hit thanks if it helped
send from my HTC explorer from earth
very funny
Under clocking CM 10.1 will reduce performance. Its android 4.2, need more memory and cpu
@michal16
so u want OC? try OCed kernel,but remember to carefully follow cute_prince pll2 method
and about lag,it depends not only on cpu,but also sd-card u use,(class 4,6,10)...
remember to calibrate your battery after installing new rom
On LG l3 II (have the samy cpu) i can overclock it to 1400. Can i OC htc pico to 1400MHz?? It's posibble?
Ps: I know i can burn my nand but this is only question.
it wld nt only burn ur nand..also ur phone will b burnt.. :laugh:
check this video out dude i think its possible
vijnathin said:
check this video out dude i think its possible
Click to expand...
Click to collapse
try your luck with pandora extreme kernel..it supports overclock upto 900mhz..& I think cranium kernel 1.3ghz overclock is fake(no offense to the developer) because it gives lower benchmark as compared to pll2 overclock kernels.
Try it
You can try it one last time... (I think)
Now i Oc my phone to 844MHz. It's possible to OC the phone up to 1300MHz? My phone don't will burn?
michal16 said:
Now i Oc my phone to 844MHz. It's possible to OC the phone up to 1300MHz? My phone don't will burn?
Click to expand...
Click to collapse
you can use cranium kernel with jaggyrom, it'll work but the performance won't be as good as you're getting now because this is pll2 true overclock you are using now..you're lucky you got your pico working stable @844mhz, mine can't go above 767mhz.
I think its not possible ,i checked the specification of MSM 7225A chipsets,the maximum cpu clock frequency for them is 800 Mhz (official) u can overclock them a bit but 1400 Mhz is too high ....
sent from
little pico
Look at the LG l3 II. This phone have the same CPU and have 1GHz. On this phone you can overclock up to 1400MHz.
Ok i don't will test I have SDHC class 4 but i can OC up to 844MHz strange
I have next question(i didn't want doing spam) My phone is increasingly slowly. I think its NAND. I OC my ophone only one of week (on one hour) and normally working at 600 MHz. What i can do?
Ok. I have aries kernel with one partion and this laggy. Now i shearch kernel for CM10.1. I have only one partion made in recovery and this kernel must overclock pll2
michal16 said:
Ok. I have aries kernel with one partion and this laggy. Now i shearch kernel for CM10.1. I have only one partion made in recovery and this kernel must overclock pll2
Click to expand...
Click to collapse
use two external partitions for pll2 overclocking..why can't you follow developer's instruction?
i can't do it.
Hey can ny one give me the link for overclocked kernel for cm10??:laugh:
cm10 beta#6 already have overclocked kernal just download and flash it.
Its in setting performance option can set upto 800MHz
pulkitkumar190 said:
cm10 beta#6 already have overclocked kernal just download and flash it.
Its in setting performance option can set upto 800MHz
Click to expand...
Click to collapse
Any other oc kernel upports tht rom?? with s2w??