Hello xda forums, I've done a lot of research and I can't find anything conclusive about this issue...
How do I flash a new kernel on my asus tf300t with custom rom cm10.1 nightlies? I want to do this because I can't overclock over 1.3 ghz .
I'm really happy with this rom on performence mode , but in heavier games like gta vice city it still lags a lot, so I'm guessing higher freq > better gamming experience. Please help this poor child :'( . And if I'm reposting or something, u have my sincere apologies.
Thank u so much for the help and I hope this post can help as many as possible.
Are you able to reboot into recovery mode? (Hold power, press reboot and select recovery)
If you can, just download the custom kernel .zip file and go back to recovery. Select 'install zip from sdcard', browse to and select the downloaded kernel.. reboot and enjoy
Sent from my LT18i
I use Cyanogenmod 10.1, CM's kernel is so good. Problem is in I/O. If you don't want to your apps lagging, you will have to move your apps to MicroSD class 10
zaki0saad said:
Are you able to reboot into recovery mode? (Hold power, press reboot and select recovery)
If you can, just download the custom kernel .zip file and go back to recovery. Select 'install zip from sdcard', browse to and select the downloaded kernel.. reboott from my LT18i
Click to expand...
Click to collapse
Hey man, my tablet is rooted and I have cwm recovery installed, so i can boot up the tablet and acess the cwm menu via powerbtn+vol down.
So yes I can flash roms and kernels, but now I ask?? Can I install any kernel having already cm10.1 installed?? If not please give me a list of safe kernels i can install changing cm10.1 kernel on my tf300t.
If this method is to risky maybe I should install other rom with higher costumable overcklock? If yes please recommend roms with overclock ranges higher than 1.3 ghz.
Thank u for ur help
absinto10 said:
Hey man, my tablet is rooted and I have cwm recovery installed, so i can boot up the tablet and acess the cwm menu via powerbtn+vol down.
So yes I can flash roms and kernels, but now I ask?? Can I install any kernel having already cm10.1 installed?? If not please give me a list of safe kernels i can install changing cm10.1 kernel on my tf300t.
If this method is to risky maybe I should install other rom with higher costumable overcklock? If yes please recommend roms with overclock ranges higher than 1.3 ghz.
Thank u for ur help
Click to expand...
Click to collapse
I think there is only one kernel for CM10.1 that you can safely flash and that is Surdu's kernel, what you need to do is get your CM10 zip file and open it with 7zip and then replace the kernel .blob file inside with the one you want to flash, close the zip and reflash your ROM, only wipe cache/dalvik and you should have a new kernel.
Another option is to try Surdu's CM10.1 build with its own kernel, that what I have and it runs great.
hope that helps.
Erik
ricco333 said:
I think there is only one kernel for CM10.1 that you can safely flash and that is Surdu's kernel, what you need to do is get your CM10 zip file and open it with 7zip and then replace the kernel .blob file inside with the one you want to flash, close the zip and reflash your ROM, only wipe cache/dalvik and you should have a new kernel.
Another option is to try Surdu's CM10.1 build with its own kernel, that what I have and it runs great.
hope that helps.
Erik
Click to expand...
Click to collapse
Hey man thank u so much . Just to be sure, so i download the leatest cm10.1.zip extract, change the blob kernel of cm10.1 with surdu's kernel, zip again, flash > wipe cache and dalvik and it is done?
Is it really safe? And after this change can i go higher then 1.3 ghz?
Sorry for being annoying but I just want to be sure.
Thank u so much
absinto10 said:
Hey man thank u so much . Just to be sure, so i download the leatest cm10.1.zip extract, change the blob kernel of cm10.1 with surdu's kernel, zip again, flash > wipe cache and dalvik and it is done?
Is it really safe? And after this change can i go higher then 1.3 ghz?
Sorry for being annoying but I just want to be sure.
Thank u so much
Click to expand...
Click to collapse
Yep, just like that, all you are doing is replacing the CM10 kernel with a compatible one. and yes Surdu's CM10.1 kernel has GPU overclock and also CPU overclock to 1.7ghz.
Erik
ricco333 said:
Yep, just like that, all you are doing is replacing the CM10 kernel with a compatible one. and yes Surdu's CM10.1 kernel has GPU overclock and also CPU overclock to 1.7ghz.
Erik
Click to expand...
Click to collapse
Thank u so much man. So just replacing the blob didn't really work so I had to install Surdo's cm10.1 over my installed rom(cm10.1 too)>then wipe dalvik + cache and voila
Now I can overclock to 1.7 ghz
Source of Surdo's cm10.1 oc to 1.7 ghz for tf300t: http://forum.xda-developers.com/showthread.php?t=2112369
Thank u once again and hope this post can help others with the same issue
Perf Kernel in the dev setion works GREAT on CM10.1 4.2.2 builds. Tunable with franco.Kernel Updated app :good: GPU settings on the fly, mine's set @ 512. The tablet oozes butter, it's that smooth
Ti2 said:
Perf Kernel in the dev setion works GREAT on CM10.1 4.2.2 builds. Table with franco.Kernel Updated app :good: GPU settings on the fly, mine's set @ 512. The tabt oozes butter, it's that smooth
Click to expand...
Click to collapse
Hello man, so i finally figure it out, how to use perf kernel in cm10.1, and OMG it's so freaking amazing I've tunned up my cpu speed between 200 mhz and 1600 mhz in interactive mode, when gamming I use performance mode up 1.7ghz and 706 mhz gpu... Well I hope I'm not pushing to much of little tf300t xD
Thank u so much Ti2.
Ps. I use trickster insted of f.kernel app... Works really good too
You want to clock down good GPU a tad, I think 706 is really pushing it. Stock is ~440, standard Perf setting is 600.
Ti2 said:
You want to clock down good GPU a tad, I think 706 is really pushing it. Stock is ~440, standard Perf setting is 600.
Click to expand...
Click to collapse
Yeah you are probably right. Gpu with 706 oc it's to much and very unstable. When I play heavy games like Vice city and nova 3, the best settings I've found were 1.7ghz performance mode and gpu with standart perf settings(600mhz). So if u want a stable gamming experience on the tf300t, I would recommend this settings.
help?
Hello. I've flashed CM 10.1 and perf kernel and it oc my cpu to 1.7, which is good' but I can't find where to oc my gpu, can you help me?
Related
Hi,
I am a new rooted user and have been following all MT4G threads here at XDA pretty closely. Can anyone help me know which kernels I can flash on the 03012011 Nightly(cm_glacier_full-11.zip ). I haven't ever flashed a kernel and I don't know what it does and how it helps.
I'll appreciate any info that you can give me.
dipsy1849 said:
Hi,
I am a new rooted user and have been following all MT4G threads here at XDA pretty closely. Can anyone help me know which kernels I can flash on the 03012011 Nightly(cm_glacier_full-11.zip ). I haven't ever flashed a kernel and I don't know what it does and how it helps.
I'll appreciate any info that you can give me.
Click to expand...
Click to collapse
Well you can use dumfuq's SmartCMKernel or Faux's CM7RC v1.3 kernels. ATM you might want to go with dumfuq's as its the most stable CM7 kernel other than default. You can find it in development section, once downloaded to SDCard just go in to Recovery and wipe cache, davlik and then Install zip from SDCard> Choose from SDCard> Select it wherever you put it and then flash it as you normally flash rom's. Then reboot and let it run for few min and let it do its thing.
BlackSHELF said:
Well you can use dumfuq's SmartCMKernel or Faux's CM7RC v1.3 kernels. ATM you might want to go with dumfuq's as its the most stable CM7 kernel other than default. You can find it in development section, once downloaded to SDCard just go in to Recovery and wipe cache, davlik and then Install zip from SDCard> Choose from SDCard> Select it wherever you put it and then flash it as you normally flash rom's. Then reboot and let it run for few min and let it do its thing.
Click to expand...
Click to collapse
Which is the dumfuq's kernel . I hear it reffered in threads but I cant seem to find it.
Thanks
dipsy1849 said:
Which is the dumfuq's kernel . I hear it reffered in threads but I cant seem to find it.
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=930961
Its very stable I virtually tested them all and this seem to be THE one, for now till Faux come down to CM7 world.
BlackSHELF said:
http://forum.xda-developers.com/showthread.php?t=930961
Its very stable I virtually tested them all and this seem to be THE one, for now till Faux come down to CM7 world.
Click to expand...
Click to collapse
Thanks for your help. Getting this kernel now. I heard about setcpu and Quadrant. Do I need those and how/what are they used for? what kind of difference would this kernel give me?
SetCPU - name explains it but if you don't know its controls clock frequency, so you can over/under clock and even set profiles.
Quadrant - benchmark app its just to brag how high score you got nothing special, don't let it get to your head it means nothing as the synthetic benchmark no way translate in to real world performance its just pissing contest lol
Keep in mind in CM7 you have built in mCPU performance controller to to handle clock frequency which you can access via Setting> CM Setting> Performance> CPU Setting.
BlackSHELF said:
SetCPU - name explains it but if you don't know its controls clock frequency, so you can over/under clock and even set profiles.
Quadrant - benchmark app its just to brag how high score you got nothing special, don't let it get to your head it means nothing as the synthetic benchmark no way translate in to real world performance its just pissing contest lol
Keep in mind in CM7 you have built in mCPU performance controller to to handle clock frequency which you can access via Setting> CM Setting> Performance> CPU Setting.
Click to expand...
Click to collapse
Thanks Blackshelf. I am on that kernel now. What should my min and max be? and should the set on boot be set to yes?
What is Linpack?
dipsy1849 said:
Thanks Blackshelf. I am on that kernel now. What should my min and max be? and should the set on boot be set to yes?
Click to expand...
Click to collapse
You do relize you allready have a aftermarket kernel installed when you download any Rom here in the forums, right? Its ok to install different ones but FYI you dont need to in order to overclock.
TrueBlue_Drew said:
You do relize you allready have a aftermarket kernel installed when you download any Rom here in the forums, right? Its ok to install different ones but FYI you dont need to in order to overclock.
Click to expand...
Click to collapse
not past 1504Mhz though...
dipsy1849 said:
Thanks Blackshelf. I am on that kernel now. What should my min and max be? and should the set on boot be set to yes?
Click to expand...
Click to collapse
Thats up to you as only you know what you use so you can better utilize the resource. I mean if you don't use anything no reason to OC it to 1.8ghz lol that way you will kill battery.
BlackSHELF said:
http://forum.xda-developers.com/showthread.php?t=930961
Its very stable I virtually tested them all and this seem to be THE one, for now till Faux come down to CM7 world.
Click to expand...
Click to collapse
What are the differences between dumfuq's and faux's? Is there an advantage to one over the other? I've always been using faux's the whole time.
I keep going back to just using the stock CM 7 kernel clocked at 1.5 honestly I think it gives the best overall performance (on my phone at least) and honestly I had issues running over anything past 1.7 with any kernel but again that could just be my phone. I had it oc'ed at 1.7 for a while and now I have it clocked at 1.5 and notice I have less FC (not that I had many at 1.7 but def more apps would choke from time to time) This phone is pretty fast bone dry stock with no oc'ing but it runs beautiful at 1.5. I dont really notice much performance difference from 1.5 to 1.7 but I do notice a battery difference
Hi guys,
I'm very noob with Sensation, spent two nights for FAQ's, guides, etc. anyhow, still need help...
I've flashed recent CM9.1. Noticed default kernel (shipped with CM) is not overlocked and has 1.2MHz. Also noticed it has low benchmark results on Quadrant.
Then I've updated kernel with recent Faux v008, as it has a lot of positive feedbacks. Now able to overlock (didn't modified anything, just left with defaults) and benchmarks dramatically increased. So I was happy. Till yesterday when noticed it's not possible to connect phone to PC as USB drive. On forums found some similar reports with complains that this happening after kernel change.
Now questions:
1. is it possible to revert back default kernel which shipped with CM9.1 without full ROM update? (I've already configured/installed tons of apps)
2. is it possible to overlock default kernel which shipped with CM9.1?
3. is there any kernel which already overlocked and definitely compatible with CM9.1?
Faux v008 kernel is not compatible with AOSP roms.
1. Flash the zip file without wiping.
2. Its in the settings. Scroll down for performance and then processor
3. You can try Tamcore kernel. http://files.tamcore.eu/android/
Pwnzor7 said:
Faux v008 kernel is not compatible with AOSP roms.
1. Flash the zip file without wiping.
2. Its in the settings. Scroll down for performance and then processor
3. You can try Tamcore kernel. http://files.tamcore.eu/android/
Click to expand...
Click to collapse
for 2. you can't overclock the stock cm9/cm9.1 kernel...
fredcorp6 said:
for 2. you can't overclock the stock cm9/cm9.1 kernel...
Click to expand...
Click to collapse
Doesn't same CM9.1 zip is flashed both to Sensation and Sensation XE? Does it mean that XE also has 1.2MHz with stock CM9? Or there is some additional info (about default clock/voltage settings) somewhere out of ROM (in EEPROM?)?
Pwnzor7 said:
3. You can try Tamcore kernel.
Click to expand...
Click to collapse
Thanks a lot! I've installed it and now USB storage has been fixed.
Performance of TamCore is not so good as on Faux, but in principle not so bad (much better than stock one): overlocked CPU (up to 1.52MHz) and GPU (3D up to 320MHz, 2D up to 266MHz ), enabled ZRAM, and badass ('balanced' plan).
Quadrant score:
TamCore: ~2800
Faux: >3100
stock kernel: ~2200
Hello frends i am new to htc explore(not new to android).i am using stock indian rom with default kernel.i already rooted my rom.i want a kernel which work in stock rom and have NO bug and support ext partition and overclockable to more than 600mhz.thanks guys.
Welcome, there is no such kernel, mostly they are only 3 kernels for explorer, non of them works fine on stock rom, If you want stock, closest you can do is Ateeq's rom, then to clock it you have to flash yannou's kernel, which has OC but most of the guys sayed that it is fake OC, I think not but....... I'm a noob. So far what I figure out is cranium kernel, whit that you can clock it to 1307 which is fun for a while, but battery is just diyng with full clock. All of them supports ext partition.
Thanks.so cranium kernel work with stock Tom.
I have my doubts, anyway do a backup and try, I'm sure about yannou's and ateeq's they don't work with stock, when I tryed cranium, I've already forgot what stock was, so don't know but nowhere says that it wont, so it's up to you. My doubts are about stock, ti's odexed and that's why I'm not sure will it work corectly.
No kernels work with stock....only on custom roms..
my htc
Ok guys i want to install custom rom.plz suggest me a custom rom(ics based)?aokp or cm9?and what is the safe max frequency that we can overclock our phone?thanks
vikasb32 said:
Ok guys i want to install custom rom.plz suggest me a custom rom(ics based)?aokp or cm9?and what is the safe max frequency that we can overclock our phone?thanks
Click to expand...
Click to collapse
I personally recommend to try CM9, I've installed it yesterday and I can say there wasn't bugs(oh yeah, there was something, when I used phone in USB storage mode(plugged in to computer) Google Play wasn't working properly, it was force closing on the app startup. But this is nothing).
Ok thanks.can you tell me what is the max frequency which our phone can hold without any kernel panic.??
vikasb32 said:
Ok thanks.can you tell me what is the max frequency which our phone can hold without any kernel panic.??
Click to expand...
Click to collapse
Sorry, exactly now, I'm using default CM9 kernel, so I can't say that.
So default cm9 kernel is not overclockable?i assume that all custom rom have overclockable kernel?
vikasb32 said:
So default cm9 kernel is not overclockable?i assume that all custom rom have overclockable kernel?
Click to expand...
Click to collapse
I thought it too, but setCPU shows max clock 600Mhz.
zgintasz said:
I thought it too, but setCPU shows max clock 600Mhz.
Click to expand...
Click to collapse
Ok then its not overclockable.i will check.thanks
Oc is not a gud idea..du to hvy battery drain..cm9 with oc is available..but not a stable one...
my htc
Which program is everyone using to OC their TF700T? Which clock is most effective without damaging/stressing the device too hard?
Sent from my ASUS Transformer Pad TF700T
Bump-a-dump.
Sent from my HTC Rezound
No one has OC'd their Infinity?
Everyone is probably in the development section
Ummm
Clemsyn's kernel here with the 1.8 oc
I haven't dabbled with voltages.
I'm using System Tuner Pro to push the CPU to max.
I just did a stress test under the kernel with no tweaks set.
No overheat and it didn't reboot until system load hit 3.92
I'll call that good for now.
Thats OK said:
Everyone is probably in the development section
Ummm
Clemsyn's kernel here with the 1.8 oc
I haven't dabbled with voltages.
I'm using System Tuner Pro to push the CPU to max.
I just did a stress test under the kernel with no tweaks set.
No overheat and it didn't reboot until system load hit 3.92
I'll call that good for now.
Click to expand...
Click to collapse
How would I go about using Clemsyn's kernel with CleanROM 2.3? Are there any risks with combining something like Clemsyn's kernel with a custom ROM?
I didn't really want to ask in the development thread because I didn't think it was for question and answers.
Clemsyn and CleanROM work perfectly together. Check out the dev thread for either, and look at the results...
Joeful said:
How would I go about using Clemsyn's kernel with CleanROM 2.3? Are there any risks with combining something like Clemsyn's kernel with a custom ROM?.
Click to expand...
Click to collapse
Joe,
If you have flashed CleanROM 2.3 it's important to be on the JellyBean boot-loader.
If you are still on ICS upgrade to JB. (I won't go into rooting, saving root, custom recovery...blah blah)
Once you have Scotts CleanROM flashed and working.
Simply flash Clemsyn's kernel from a custom recovery.
I will say the risk is less than moderate.
I have had a good experience to this point in time.
______________________________________________________________________________________
*Trying to stay simple here so I won't post links and other confusion.
I'm kind of a dummy or "newbster" if you will myself.
Once I got unlocked I was committed to either bricking or learning how to do this.
I made the mistake of installing Scotts ROM then flashed Clemsyn's over an ICS downgrade.
Dismal results there...so I just started from scratch...learned about flashing thru ADB from my windows PC.
I recommend getting to know the ADB (android development bridge) commands.
ADB is just a command prompt...like a DOS window that speaks to Android on a device.
It's certainly possible to crap the tab using it, yet it's an invaluable tool for flashing.
Used hiemanshu's method to gain root after flashing JellyBean .18.
Worked very well once the procedure clicked in my head.
Tons of help here at the development paradise known as XDA...
danger-rat said:
Clemsyn and CleanROM work perfectly together. Check out the dev thread for either, and look at the results...
Click to expand...
Click to collapse
Is there a tutorial on how to install Clemsyn buried in the official thread?
Sent from my ASUS Transformer Pad TF700T
If you have CleanROM installed.
Simply flash the kernel.
It works in addition to CleanROM.
Clemsyn's is added to Scotts ROM.
Thats OK said:
If you have CleanROM installed.
Simply flash the kernel.
It works in addition to CleanROM.
Clemsyn's is added to Scotts ROM.
Click to expand...
Click to collapse
Ok. Awesome! Thanks. If it causes problems for my device, does TWRP allow me to unflash (if that is even a thing)?
Sent from my HTC Rezound
I built a flashable zip with the clean ROM stock kernel. I'll send you a copy of you need it, and you can flash it just like you do with Clemsyn's kernel. I doubt you'll need it...
As noted above, you want to be on the JB (10.x) bootloader. Nothing to do with losing root, saving root, accessing recovery, and all that crap, but there's a restriction on the 9.x bootloader that restricts increased voltages, and this restricts the higher clock speeds associated with the increased voltage...
Personally I would make a backup of the tablet without the Kernal just in case then flash the kernal and if for some reason it doesnt work or you dont like it then you can go back to the recovery.
Don't forget to do a backup in TWRP before each step.
I have been renaming my backups ie; B4CL22, B4CL23, B4Clems22 and so on...you get the idea.
I can keep them straight that way.
Backups are very important as I now know.
hi, i have tf300t and i succesful flash cleanrom 2.3 and clemsyn kernel, but i haven't overclock. why?
abburci said:
hi, i have tf300t and i succesful flash cleanrom 2.3 and clemsyn kernel, but i haven't overclock. why?
Click to expand...
Click to collapse
Did you flash the 1.8 ghz kernel?
buhohitr said:
Did you flash the 1.8 ghz kernel?
Click to expand...
Click to collapse
yes
abburci said:
yes
Click to expand...
Click to collapse
what is your clock speed?
buhohitr said:
what is your clock speed?
Click to expand...
Click to collapse
1300 mhz in performance
abburci said:
1300 mhz in performance
Click to expand...
Click to collapse
What app did you use to set your clock speed? have you tried "setcpu" or "System tuner" to see if it's over clocked to 1.8?
buhohitr said:
What app did you use to set your clock speed? have you tried "setcpu" or "System tuner" to see if it's over clocked to 1.8?
Click to expand...
Click to collapse
no, i tried nofrills cpu (sorry) and my max frequency is 1.3
Hello everyone from XDA forum. I am new to everything in this forum lol. I currently have TF300T tablet running the latest 4.2.1 Jelly Bean and Build 10.6.1.15.3. After a week of research over the internet, I have finally unlocked my boot loader and rooted the tablet. I followed the directions from the top of the page of this forum http://forum.xda-developers.com/showthread.php?t=2204166 on how to install the new [CROMi-Xenogenesis 4.6.9]. My flashing steps are as follow.
1. Made a nandroi backup with twerp TWRP 2.5.0.0
2. While still in TWRP I hit install CROMi-Xenogenesis 4.6.8. Zip when finish I wipe dalvik and cache after rom flash
3. I then hit install again and flash CROMI-X 4.6.9 System Patch Download 1 - 151.88 KB when finish I wipe dalvik and cache after rom flash
4. Booted into system successfully and let the system stay idle for 10 minutes (assuming this is what stabilzing the rom meant)
5. I ran quadrant and only got a score improvement from 3393 stock to a 4601 with the cromi 4.6.9 as oppose to the 6614 score shown on the [CROMi-Xenogenesis 4.6.9] forum page
So my main concern is did I do something wrong in the process of installing the custom rom? I really want to get that quadrant score of 6614. If anyone from the team can help I be much appreciated. Thank you
The screenshot showed the result from the TF700 which obviously have a faster CPU then the 300. You should look at the individual scores at the bottom or you can flash a custom kernel to overclock your device. Even then, I don't understand why you are distressing yourself over something of such trivial significance.
Hint Hint http://forum.xda-developers.com/showpost.php?p=40919820&postcount=71 ive got benchmarks of 7000 with it on cromi. Which is about he same as most tf700s, only the tf700 has higher overclocked kernels available, higher revisions of our cpu should be able to handle the same overclocks, but there isn't a high oc kernel to test yet
Username invalid said:
The screenshot showed the result from the TF700 which obviously have a faster CPU then the 300. You should look at the individual scores at the bottom or you can flash a custom kernel to overclock your device. Even then, I don't understand why you are distressing yourself over something of such trivial significance.
Click to expand...
Click to collapse
Well the reason I unlock my tablet was to unleash its full potential with a stable overclock thats why I wanted to reach the "6614" score on quadrant. Anyway, thanks for clarifying. I didn't know that it was a tf700 score, just assume that installing that rom would yield a higher score.
JoinTheRealms said:
Hint Hint http://forum.xda-developers.com/showpost.php?p=40919820&postcount=71 ive got benchmarks of 7000 with it on cromi. Which is about he same as most tf700s, only the tf700 has higher overclocked kernels available, higher revisions of our cpu should be able to handle the same overclocks, but there isn't a high oc kernel to test yet
Click to expand...
Click to collapse
Hey JoinTheReamls, that's an awesome score. Didnt think it was possible to bench that high on a tf300t. Is that kernel from the link you shown provide a stable over clock for a 24/7 a day usage? If not are there any other kernel that's compatible with my current custom ROM? If the rom you mention is stable, how would I go about installing this kernel on my tf300t running 4.2.1 Cromi 4.6.9? Please be thorough with your installation step as I am still fairly a noob. Thank you
dante510 said:
Hey JoinTheReamls, that's an awesome score. Didnt think it was possible to bench that high on a tf300t. Is that kernel from the link you shown provide a stable over clock for a 24/7 a day usage? If not are there any other kernel that's compatible with my current custom ROM? If the rom you mention is stable, how would I go about installing this kernel on my tf300t running 4.2.1 Cromi 4.6.9? Please be thorough with your installation step as I am still fairly a noob. Thank you
Click to expand...
Click to collapse
That kernel is completely stable for me and should be for you to, if it isnt for you there is a kernel in that thread with 1.75ghz overclock that will be.
installation is very easy, just reboot to twrp and flash the zip. No need for any wipes, this is the same for most android kernel install across most devices
Enjoy
I am pretty sure the Quadrant scores are based on performance mode selected. Try that. I'm getting close to 6000 if I do this.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
You should be able to get over 6000 on the TF300 with Hunds kernel. That's will probably be 1000 less.
JoinTheRealms said:
That kernel is completely stable for me and should be for you to, if it isnt for you there is a kernel in that thread with 1.75ghz overclock that will be.
installation is very easy, just reboot to twrp and flash the zip. No need for any wipes, this is the same for most android kernel install across most devices
Enjoy
Click to expand...
Click to collapse
I flash the 1.8 GHz kernel with cromi and it was not stable when I increase frequency to 1.8ghz. Then flash the 1.75 GHz and has been stale for the past two days .
Weaponx525 said:
I am pretty sure the Quadrant scores are based on performance mode selected. Try that. I'm getting close to 6000 if I do this.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
I finally bench in performance mode and score was totally different. Thanks for info.
sbdags said:
You should be able to get over 6000 on the TF300 with Hunds kernel. That's will probably be 1000 less.
Click to expand...
Click to collapse
Thanks for your awesome cromix 4.6.9 ROM cheers everyone for the friendly assistant.
:victory: