Database Info

[Q] Overclocking

Im rooted my desire Z yesterday to the gingerbread sense 3.0/3D rom.
im very happy that i have done it and my battery experience is either improved.
but my experience of the reaction time, smooth animation ect. were kindly bad
this is why i want to overclock my processor, but the rom included the new kernel 2.6.35.10 to be exactly. this kernel is not yet overclockable and i wanna know why.
- why make different kernels need different methods of overclocking
- why can it by bad if you overclock it to high.
- can i just flash another kernel to overclock my new gingerbread sense 3.0 rom.

Soulbody said:
Im rooted my desire Z yesterday to the gingerbread sense 3.0/3D rom.
im very happy that i have done it and my battery experience is either improved.
but my experience of the reaction time, smooth animation ect. were kindly bad
this is why i want to overclock my processor, but the rom included the new kernel 2.6.35.10 to be exactly. this kernel is not yet overclockable and i wanna know why.
- why make different kernels need different methods of overclocking
- why can it by bad if you overclock it to high.
- can i just flash another kernel to overclock my new gingerbread sense 3.0 rom.
Click to expand...
Click to collapse
if you overclock the processor of your device you can smoke your DZ
but if you do it with careful it is not bad for your device.
the kernel that you have its a stock kernel (factory kernel) and its not customized for to be over/underclocked... you should flash another kernel for to change CPU speeds...
nornally you can overclock your desire z (good machine mate ) 1.300mhz-1500mhz i not recommend to do overclock upper than 1500-1700... i had read some threads that some people was smoked his device (all with the proccessor QUALCOMM SNAPDRAGON 1ghz)another think its the freeze problem when you overclock your processor too much.. be careful!
and one important thing.. also its important if you do underclock.... don´t put it under 245mhz more or less because maybe your device don´t has sufficient power to exit of stanby mode
i recommend that ALWAYS do overclock with SETCPU.apk that its available free for XDA MEMBERS its the most safety mode
sorry for my english

SERGI.3210 said:
if you overclock the processor of your device you can smoke your DZ
but if you do it with careful it is not bad for your device.
the kernel that you have its a stock kernel (factory kernel) and its not customized for to be over/underclocked... you should flash another kernel for to change CPU speeds...
nornally you can overclock your desire z (good machine mate ) 1.300mhz-1500mhz i not recommend to do overclock upper than 1500-1700... i had read some threads that some people was smoked his device (all with the proccessor QUALCOMM SNAPDRAGON 1ghz)another think its the freeze problem when you overclock your processor too much.. be careful!
and one important thing.. also its important if you do underclock.... don´t put it under 245mhz more or less because maybe your device don´t has sufficient power to exit of stanby mode
i recommend that ALWAYS do overclock with SETCPU.apk that its available free for XDA MEMBERS its the most safety mode
sorry for my english
Click to expand...
Click to collapse
EDIT:for to do overclock you must to download a new kernel (compatible with your current rom) and flash it from recovery or via adb you decide!
cheeeerrrssss mate

Noob
Hey guys, just wanted to know if theres an easier way to overclock the newest htc kernel?

Hey guys, just wanted to know if theres an easier way to overclock the newest htc kernel?
Click to expand...
Click to collapse
YOU CANT OVERCLOCK AN STOCK KERNEL YOU MAY TRY AN OVERCLOCKABLE KERNEL IN DEVELOPMENT SECTIION OF YOUR DEVICE..
Sent from my NEXUS Susing the XDA mobile application powered by Tapatalk

overclock question 1 to 1,2 ghz

hye folks,
i have rooted my asus transformer and installed prime1,9. I also tested the psx emulator with tekken 3 but the games lags so i thougt to increase the cpu from 1 ghz to 1,2 ghz can some tell what i have to do ..

abati said:
hye folks,
i have rooted my asus transformer and installed prime1,9. I also tested the psx emulator with tekken 3 but the games lags so i thougt to increase the cpu from 1 ghz to 1,2 ghz can some tell what i have to do ..
Click to expand...
Click to collapse
Use the seach button and read the kernel threads.
Rule #1

dude i searched allot but i only found kernels for 1,4 ghz or 1,6 ghz i realy need 1,2 cus that is the one that is most stable

dude i searched allot but i only found kernels for 1,4 ghz or 1,6 ghz i realy need 1,2 cus that is the one that is most stable

abati said:
dude i searched allot but i only found kernels for 1,4 ghz or 1,6 ghz i realy need 1,2 cus that is the one that is most stable
Click to expand...
Click to collapse
You set the kernel speed to what you want with setcpu or something like it. These kernels tell you what the max is. You can set it however you want.

You obviously have no understanding or concept of what you want to do.
Therefore i suggest you dont do it.

i know exactly want i want, but it is so confusing cus i followed this how to
http://eeepadhacks.net/transformer-hacks/how-to-overclock-your-eeepad-transformer-to-1-6ghz/
after i installed the kernel and rebooted it freezed and i rebooted several times but it kept freezing.
So can you offer me some help so that i can overclock tot 1,2 ghz

flashing kernels is easy, making sure they're compatible can be tough. for you running Prime 1.9 I suggest clemsyns latest kernel. I think he's up to 21 now. you can find his tread in development. just also know that if the kernel flashing doesn't go well you can always reflash your rom to return to a kernel that works. once your new kernel is installed you need to install an app to regulate your CPU frequencies. I recommend setcpu which can be acquired on xda for free. I'm not going to post the link, just search for it, I believe its in android general forums. other than that you can search the market for overclock and choose from the many options available, just know that some programs might not work for the transformer.
EDIT: make sure to get clemsyns "b" kernel unless you have installed voodoo sound separately.

thnxx for the replay i wiil try the other romm

abati said:
dude i searched allot but i only found kernels for 1,4 ghz or 1,6 ghz i realy need 1,2 cus that is the one that is most stable
Click to expand...
Click to collapse
Depends. In my case using Prime 1.9.1 with the "official" overclock kernel I can use in perfect stability 1.6ghz. Last time I gave a try to a clemsyns kernel (v9 maybe?) I could get stability only up to 1.2ghz..... it kinda varies between the kernel, rom and specific machine as some might work better than others.
Also as already said, just get a kernel that works with your rom and set it at the clock you want using SetCPU or another app.

Great work ! you helped me all out, now i overclocked to 1,2 ghz succesfully and i can play tekken 3 without any lag thnx to you !

CPU Overclocking

Hey people today I flash UC Kernel V08 NOC to my phone DDKP2 2.3.6 but I was not able to see improvement in video recording. I saw in the comments that Chaos and team has fixed only V08 Overclocked version. So i was thinkin why not overclock my phone and then flash OC version.
My question is I have installed NO FRILLS CPU Control.. I Wanted to know what setting should i keep on it and then should I flash V08 OC version! Thanks

anuragvivek93 said:
Hey people today I flash UC Kernel V08 NOC to my phone DDKP2 2.3.6 but I was not able to see improvement in video recording. I saw in the comments that Chaos and team has fixed only V08 Overclocked version. So i was thinkin why not overclock my phone and then flash OC version.
My question is I have installed NO FRILLS CPU Control.. I Wanted to know what setting should i keep on it and then should I flash V08 OC version! Thanks
Click to expand...
Click to collapse
max freq - 1200 mhz
min freq - 300 mhz
i/o schedular - sio
governer - smartassv2
dont set 200 mhz min freq. Phone will freeze.

ok after that can i flash v08 ov version over noc version??

anuragvivek93 said:
ok after that can i flash v08 ov version over noc version??
Click to expand...
Click to collapse
@Dude, Yes you can flash OC version over NOC version - but i believe that currently NOC version is more stable than OC ; However OC will definitely give an inch over NOC in performance.

but in the uc kernel thread I saw that fix has been done for OC version whereas for NONOC version there is not fix....

vishal24387 said:
max freq - 1200 mhz
min freq - 300 mhz
i/o schedular - sio
governer - smartassv2
dont set 200 mhz min freq. Phone will freeze.
Click to expand...
Click to collapse
hey i am only gettin 1.0 mhz option in No frills! what to do!

anuragvivek93 said:
hey i am only gettin 1.0 mhz option in No frills! what to do!
Click to expand...
Click to collapse
buddy first flash OC v08 version & then do that settings. Its so simple...

hi vishal is overclocking harmful to d phone?
also tell me can i get back ti original stock kernel by just flashing stock firmware:xxkpe-->xxkpq.?

burninghouse said:
hi vishal is overclocking harmful to d phone?
also tell me can i get back ti original stock kernel by just flashing stock firmware:xxkpe-->xxkpq.?
Click to expand...
Click to collapse
yes and yes

Agreed.. and Iam Still thinking why do we need 1.2 OC???? anyone?!?!?!

Well, after installing Sch ROM, ICS Theme, and UC-Kernel v8 with OC everything is running super smooth. I'm able to play Dungeon Defenders on highest graphics quality (which is in fact native screen resolution), although my quadrant benchmark has dropped from 2600/2800 to 1500.
Why not? Of course it would be better to have some more frequencys to choose from and i would like to also have additional 1000 MHz as a frequency the CPU is clocked maximum in standard situations and only manually "overclock" to 1.2 GHz in example for gaming.

1.2 ОС-is the speed!

to fasten our phone! althoug I have overcloked but not able to see any major overhaul!

to fasten our phone! althoug I have overcloked but not able to see any major overhaul!
Click to expand...
Click to collapse
have you enabled a cpu managing app like Nofrills CPU control?
you wont really recognize the improvement in daily usage, try out a HD game like asphalt, you WILL fell the difference, (in performance as in battery drain^^)

Help with CM

Hi all! When i use jaggy rom i set 320MHz and i have 0 lags. when i use CM 10.1 and i write anything i have extremely lags (on 600 MHz). I have aries kernel v1 (v2 not working). And battery use is very high. With wich kernel and rom i will nave no lags and i will can set 828 MHz?
Ps: i like CM is very nice

michal16 said:
Hi all! When i use jaggy rom i set 320MHz and i have 0 lags. when i use CM 10.1 and i write anything i have extremely lags (on 600 MHz). I have aries kernel v1 (v2 not working). And battery use is very high. With wich kernel and rom i will nave no lags and i will can set 828 MHz?
Ps: i like CM is very nice
Click to expand...
Click to collapse
Maybe CM10 or CM9 with pandora or jarvis kernel but i tried them a lot of times and cant boot. Battery use will always be high i think, cause its CM10.1 and it is oc-ed.
P.S i think maybe ill try some sense (3.5 maybe) cause it boots very fast, no lags and better battery life.

for example

http://forum.xda-developers.com/showthread.php?t=2344110 i find this. this will be good?

Help me with rom and kernel i have to use?

help?
:crying:

michal16 said:
help?
:crying:
Click to expand...
Click to collapse
Use any other rom
hit thanks if it helped
send from my HTC explorer from earth

very funny

Under clocking CM 10.1 will reduce performance. Its android 4.2, need more memory and cpu

@michal16
so u want OC? try OCed kernel,but remember to carefully follow cute_prince pll2 method
and about lag,it depends not only on cpu,but also sd-card u use,(class 4,6,10)...
remember to calibrate your battery after installing new rom

Can i OC phone to 1400MHz?

On LG l3 II (have the samy cpu) i can overclock it to 1400. Can i OC htc pico to 1400MHz?? It's posibble?
Ps: I know i can burn my nand but this is only question.

it wld nt only burn ur nand..also ur phone will b burnt.. :laugh:

check this video out dude i think its possible

vijnathin said:
check this video out dude i think its possible
Click to expand...
Click to collapse
try your luck with pandora extreme kernel..it supports overclock upto 900mhz..& I think cranium kernel 1.3ghz overclock is fake(no offense to the developer) because it gives lower benchmark as compared to pll2 overclock kernels.

Try it
You can try it one last time... (I think)

Now i Oc my phone to 844MHz. It's possible to OC the phone up to 1300MHz? My phone don't will burn?

michal16 said:
Now i Oc my phone to 844MHz. It's possible to OC the phone up to 1300MHz? My phone don't will burn?
Click to expand...
Click to collapse
you can use cranium kernel with jaggyrom, it'll work but the performance won't be as good as you're getting now because this is pll2 true overclock you are using now..you're lucky you got your pico working stable @844mhz, mine can't go above 767mhz.

I think its not possible ,i checked the specification of MSM 7225A chipsets,the maximum cpu clock frequency for them is 800 Mhz (official) u can overclock them a bit but 1400 Mhz is too high ....
sent from
little pico

Look at the LG l3 II. This phone have the same CPU and have 1GHz. On this phone you can overclock up to 1400MHz.
Ok i don't will test I have SDHC class 4 but i can OC up to 844MHz strange
I have next question(i didn't want doing spam) My phone is increasingly slowly. I think its NAND. I OC my ophone only one of week (on one hour) and normally working at 600 MHz. What i can do?

Ok. I have aries kernel with one partion and this laggy. Now i shearch kernel for CM10.1. I have only one partion made in recovery and this kernel must overclock pll2

michal16 said:
Ok. I have aries kernel with one partion and this laggy. Now i shearch kernel for CM10.1. I have only one partion made in recovery and this kernel must overclock pll2
Click to expand...
Click to collapse
use two external partitions for pll2 overclocking..why can't you follow developer's instruction?

i can't do it.