i got this problem when i used Creeds 3.0 and no frills to overclocked to 806 Hhz, with conservative govenor and I/o scheduler : deadline.... i got a loud beep and my phone hung... though i remove the battery adn rebooted and it worked.... so i tried on 787 mhz adn the phone again hung?
Am i doing something wrong ? Please help
Looks like your phone can't handle the overclock.
i have a samsung galaxy fit and it can be easily overclocked over 800 mhz in other custom Roms
Raval Kaushal said:
i have a samsung galaxy fit and it can be easily overclocked over 800 mhz in other custom Roms
Click to expand...
Click to collapse
well this rom cant handle it, thats all just find the oc that is stable
hmm... i thought it could be that ... something to do with cf files
might not be the rom so much as the kernel it comes with. If u like ur current rom flash a different kernel
Related
Hey Hi guys need some help here. I Flashed my galaxy fit with 7.2 rom and i Overclocked it to 800 mhz now what should i do to check whether it is overclocked or not and what are the steps further to make my Device faster.
Steps i have done so far
Flashed With Recovery
Installed 7.2
Install 800 mhz Kernal
Thats it now what..........?
Mr.Oug said:
Hey Hi guys need some help here. I Flashed my galaxy fit with 7.2 rom and i Overclocked it to 800 mhz now what should i do to check whether it is overclocked or not and what are the steps further to make my Device faster.
Steps i have done so far
Flashed With Recovery
Installed 7.2
Install 800 mhz Kernal
Thats it now what..........?
Click to expand...
Click to collapse
Now install SetCPU (or any other app like that) and set the max freq. to 801mhz and then choose an scaling (I recommend Smartassv2 or InteractiveX)
You can find SetCPU here http://forum.xda-developers.com/showthread.php?t=505419
after that play some hardcore 3d games like deadspace
Hey people today I flash UC Kernel V08 NOC to my phone DDKP2 2.3.6 but I was not able to see improvement in video recording. I saw in the comments that Chaos and team has fixed only V08 Overclocked version. So i was thinkin why not overclock my phone and then flash OC version.
My question is I have installed NO FRILLS CPU Control.. I Wanted to know what setting should i keep on it and then should I flash V08 OC version! Thanks
anuragvivek93 said:
Hey people today I flash UC Kernel V08 NOC to my phone DDKP2 2.3.6 but I was not able to see improvement in video recording. I saw in the comments that Chaos and team has fixed only V08 Overclocked version. So i was thinkin why not overclock my phone and then flash OC version.
My question is I have installed NO FRILLS CPU Control.. I Wanted to know what setting should i keep on it and then should I flash V08 OC version! Thanks
Click to expand...
Click to collapse
max freq - 1200 mhz
min freq - 300 mhz
i/o schedular - sio
governer - smartassv2
dont set 200 mhz min freq. Phone will freeze.
ok after that can i flash v08 ov version over noc version??
anuragvivek93 said:
ok after that can i flash v08 ov version over noc version??
Click to expand...
Click to collapse
@Dude, Yes you can flash OC version over NOC version - but i believe that currently NOC version is more stable than OC ; However OC will definitely give an inch over NOC in performance.
but in the uc kernel thread I saw that fix has been done for OC version whereas for NONOC version there is not fix....
vishal24387 said:
max freq - 1200 mhz
min freq - 300 mhz
i/o schedular - sio
governer - smartassv2
dont set 200 mhz min freq. Phone will freeze.
Click to expand...
Click to collapse
hey i am only gettin 1.0 mhz option in No frills! what to do!
anuragvivek93 said:
hey i am only gettin 1.0 mhz option in No frills! what to do!
Click to expand...
Click to collapse
buddy first flash OC v08 version & then do that settings. Its so simple...
hi vishal is overclocking harmful to d phone?
also tell me can i get back ti original stock kernel by just flashing stock firmware:xxkpe-->xxkpq.?
burninghouse said:
hi vishal is overclocking harmful to d phone?
also tell me can i get back ti original stock kernel by just flashing stock firmware:xxkpe-->xxkpq.?
Click to expand...
Click to collapse
yes and yes
Agreed.. and Iam Still thinking why do we need 1.2 OC???? anyone?!?!?!
Well, after installing Sch ROM, ICS Theme, and UC-Kernel v8 with OC everything is running super smooth. I'm able to play Dungeon Defenders on highest graphics quality (which is in fact native screen resolution), although my quadrant benchmark has dropped from 2600/2800 to 1500.
Why not? Of course it would be better to have some more frequencys to choose from and i would like to also have additional 1000 MHz as a frequency the CPU is clocked maximum in standard situations and only manually "overclock" to 1.2 GHz in example for gaming.
1.2 ОС-is the speed!
to fasten our phone! althoug I have overcloked but not able to see any major overhaul!
to fasten our phone! althoug I have overcloked but not able to see any major overhaul!
Click to expand...
Click to collapse
have you enabled a cpu managing app like Nofrills CPU control?
you wont really recognize the improvement in daily usage, try out a HD game like asphalt, you WILL fell the difference, (in performance as in battery drain^^)
guys why my galaxy fit can't handle OC up to 801Mhz? always get restart and restart again
i tried several ROMs like creed, CM7, choco,razo and still the same, can't go to 801Mhz and suddenly my phone restart
my phone can only handle and stable at 763Mhz, when i go to 774Mhz the result is not really stable, like closing app suddenly and freeze for a sec
any solution for that guys? thanks
aren't all phones basically the same?
so in this case i just unlucky?
all kernels are unstable at max and near max frequency....you can stick to anything below 750...im using 736 at razo is is as stable as stock rom...730 or 800 it shouldnt make a big deal of difference...and what app did you use to set frequency each rom dev might have mentioned the recommended one(no frills cpu control or setcpu mostly)and which governor do you use.........
i set governor ondemand and I/O deadline
almost all app freeze for a sec and then closing suddenly
but my friend's phone (galaxy fit) is stable with OC up to 800Mhz without problem
I keep my phone running on 801/245 MHz Ondemans/bfq all the time...
same with me, unestable if i try to go 740+ ... stable at 734 mhz
lomash said:
I keep my phone running on 801/245 MHz Ondemans/bfq all the time...
Click to expand...
Click to collapse
tried this, but after several minutes my phone restart again
it depends on wat ROM ur using currently... so wat are u using??
i'm using razodroid v1.0
and the op has tried oc on almost all the ROMs with same results.
lomash said:
i'm using razodroid v1.0
and the op has tried oc on almost all the ROMs with same results.
Click to expand...
Click to collapse
same with me ... i used razodroid v1, CM music edition, CM 7 RC5.5 and Chocobread v1 and still cant OC more than 734 Mhz ....
i have this problem too.
my rom is Cyanogen RC5.5 and i test OC frequency's on many roms"cyanogen music edition , CM7.2 , ..."
my phone was unstable over 740Mhz.
i test with no fillirs and Antutu benchmark and Overclock tools.
same prob...my gfit cant handle over 763..used razodroidv2 and cm roms
its not ur phones fault i think!!801Mhz is not stable yet on galaxy fit!! please wait for 801Mhz stable version b4 trying it! even my fit has issues at 801Mhz!! so chill guys!
Pretty Stable for me
can you insert the OC kernel and your Overclock App?
thanks.
hari047 said:
its not ur phones fault i think!!801Mhz is not stable yet on galaxy fit!! please wait for 801Mhz stable version b4 trying it! even my fit has issues at 801Mhz!! so chill guys!
Click to expand...
Click to collapse
hey my friend's galaxy fit is very stable using OC up to 801Mhz without any prob and issue, and the problem is why my galaxy fit can't?
i'm using RazoDroid's 801MHz OC kernel and NoFrillz CPU
i have to try out RazoDroid V1.0 on 801MHz then!!
my phone crash in 720+ mhz with all governors=(
I flashed vengeance kernel 1.46 on my tipo with 4.22 firmware and also flashed the modules.zip from 1.40 but set cpu is still showing max freq - 800 mhz
sou123 said:
I flashed vengeance kernel 1.46 on my tipo with 4.22 firmware and also flashed the modules.zip from 1.40 but set cpu is still showing max freq - 800 mhz
Click to expand...
Click to collapse
That's because overclocking was removed from the Vengeance features.
The kernel wasn't stable on overclock and overclocking will probably not be re-added to the features.
The old 1.40 still had overclocking I believe.
It's too bad, but don't try to make a big deal out of it, it was nice as long as it worked, but that's it.
Regards, Drago
was it stable with 800 mhz as max freq? i really want to try overclocking
sou123 said:
was it stable with 800 mhz as max freq? i really want to try overclocking
Click to expand...
Click to collapse
A 800Mhz frequency is stock. I'm not sure if the 1.40 Vengeance kernel is still available somewhere, maybe you could ask around and try it. But still I wouldn't recommend it, especially if you're new to this sort of stuff.
The 1.40 kernel van clock to max 1000Mhz, but that will definitely create random reboots, I say try max 900Mhz, check if you can find a nice combination of schedulers and governors to keep it stable.
Good luck!
Regards, Drago
On LG l3 II (have the samy cpu) i can overclock it to 1400. Can i OC htc pico to 1400MHz?? It's posibble?
Ps: I know i can burn my nand but this is only question.
it wld nt only burn ur nand..also ur phone will b burnt.. :laugh:
check this video out dude i think its possible
vijnathin said:
check this video out dude i think its possible
Click to expand...
Click to collapse
try your luck with pandora extreme kernel..it supports overclock upto 900mhz..& I think cranium kernel 1.3ghz overclock is fake(no offense to the developer) because it gives lower benchmark as compared to pll2 overclock kernels.
Try it
You can try it one last time... (I think)
Now i Oc my phone to 844MHz. It's possible to OC the phone up to 1300MHz? My phone don't will burn?
michal16 said:
Now i Oc my phone to 844MHz. It's possible to OC the phone up to 1300MHz? My phone don't will burn?
Click to expand...
Click to collapse
you can use cranium kernel with jaggyrom, it'll work but the performance won't be as good as you're getting now because this is pll2 true overclock you are using now..you're lucky you got your pico working stable @844mhz, mine can't go above 767mhz.
I think its not possible ,i checked the specification of MSM 7225A chipsets,the maximum cpu clock frequency for them is 800 Mhz (official) u can overclock them a bit but 1400 Mhz is too high ....
sent from
little pico
Look at the LG l3 II. This phone have the same CPU and have 1GHz. On this phone you can overclock up to 1400MHz.
Ok i don't will test I have SDHC class 4 but i can OC up to 844MHz strange
I have next question(i didn't want doing spam) My phone is increasingly slowly. I think its NAND. I OC my ophone only one of week (on one hour) and normally working at 600 MHz. What i can do?
Ok. I have aries kernel with one partion and this laggy. Now i shearch kernel for CM10.1. I have only one partion made in recovery and this kernel must overclock pll2
michal16 said:
Ok. I have aries kernel with one partion and this laggy. Now i shearch kernel for CM10.1. I have only one partion made in recovery and this kernel must overclock pll2
Click to expand...
Click to collapse
use two external partitions for pll2 overclocking..why can't you follow developer's instruction?
i can't do it.