hey guys im having a lil problem getting my 1.5ghz overcloxk to stay.. i deleted cpuspeed, set a profile, enable it to boot on startup in pimpmycpu after lik 5 10 mins it goes bacl to stock yet everything is still enabled under pimpmy cpu anyideas???
G2x 1.5ghz 2.3.3
aspiredude86 said:
hey guys im having a lil problem getting my 1.5ghz overcloxk to stay.. i deleted cpuspeed, set a profile, enable it to boot on startup in pimpmycpu after lik 5 10 mins it goes bacl to stock yet everything is still enabled under pimpmy cpu anyideas???
G2x 1.5ghz 2.3.3
Click to expand...
Click to collapse
Did save the profile?
Set as boot?
Reboot?
Try reading how to use pimpmycpu
Cuz it works for me....
Or try to flash the morfic kernel again
Sent from my LG-P999 using XDA Premium App
yea tried dat.. its weird cuz linpack at 1.5ghz after5 mins goes back to 35flops n my quadrant is da same..mayb a gllitch w linpack..
G2x 1.5ghz 2.3.3
there are still currently some issues with the governor(s) that the tegra chips will use and OC on boot is a little quirky as well... patience my friend...
the great LG gods will hopefully release a nice 2.3.4 build for us with a new baseband and drivers to make our devices number 1!
Related
Hey everyone, I flashed a custom Kernal and im Oc'd at 825mhz, and im thinking hmm thats actually about 199mhz away from 1ghz....so is it possible to OC my phone to that speed?...if so please tell me how!!!!
established said:
Hey everyone, I flashed a custom Kernal and im Oc'd at 825mhz, and im thinking hmm thats actually about 199mhz away from 1ghz....so is it possible to OC my phone to that speed?...if so please tell me how!!!!
Click to expand...
Click to collapse
sure if you want to fry your phone, my phone gets hot at about 600, your phone shouldnt even be stable at 825mhz, your phone would catch fire if you tried to set it that high, the mytouch just isnt built for that.
i use the cm5.0.7 kernel and am using 122/576Mhz. how do i easily overclock to 600mhz? is this possible with a hack or do i have to flash another kernel ?
established said:
Hey everyone, I flashed a custom Kernal and im Oc'd at 825mhz, and im thinking hmm thats actually about 199mhz away from 1ghz....so is it possible to OC my phone to that speed?...if so please tell me how!!!!
Click to expand...
Click to collapse
If your asking if u can get to 1ghz then how did u get to 825mhz? I wouldnt even trust my phone running that high, I would put it down to 600-700
How hot is it running atm?
my phone flies actually and keeps cool like it was clocked at 384mhz and the battery rocks to tell u the truth...
u guys want me to post the kernal i use for u guys to see for urselves?
-------------------------------------
Sent via the XDA Tapatalk App
established said:
my phone flies actually and keeps cool like it was clocked at 384mhz and the battery rocks to tell u the truth...
u guys want me to post the kernal i use for u guys to see for urselves?
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
just flash it like u would flash a rom and reboot ur phone..get set cpu from the market or anywhere else...choose auto detect speeds...set the governor to userspac because if you dont then ur phone will crash...set to 825 mhz and enjoy!!!
Well, on my Inspire I have flashed a custom rom that gives me up to a 1400 score on my Quadcore tests, yet I see other people hitting 2000-2500, what am I doing wrong? I'm using Core Droid v5.0 with a flashed radio that speeds up my download and upload speeds. Do you guys have any advice on how to speed up my Android?
And by the way, yes I do have set CPU and I have the settings on Max (1024000) and on Minimum (245761) I also have set on boot ticked along with profiles to save battery life. Any help is appreciated.
Sincerely,
RootTheNoob
Are you running a kernael that can be overclocked?
How can I tell of it can be overlooked, and I'm pretty sure I am its the default core Droid Rom, or do I have to install the kernel separately as well?
Sent from my Desire HD using XDA App
The default CoreDroid kernel isn't overclocked. Also if you have an overlooked kernel, setcpu would let you push past 1ghz.
Sent from my Inspire 4G using XDA App
I think you can use the leedroid kernel with coredroid can't you? If so, I'm using that one. It will overclock to 1.8. I only run at 1.2 though.
see post 957:
http://forum.xda-developers.com/showthread.php?p=12123867&highlight=leedroid#post12123867
So what do I set it to to overclock it?
First you have to floash the kernel. The you use the slider in set cpu to overclock.
How do I flash it?
Sounds like you have some reading to do. Download the kernel to the root of your SD card. Then from ROM manager use CWM to flash rom from SD Card. DO A BACK UP FIRST THOUGH. Read the first few leedroid posts and that will help
No, I know how to flash things but what kernel do I use?
What kernel do I use with Core Droid?
http://leedroid.ftp.rshost.eu/DHD-Kernels/
it is the 2.2.9. Check his post here and it will tell you what you are getting
http://forum.xda-developers.com/showthread.php?t=991848
Try the Inversely ROM...sure its stock based but the kernel can be oc'd to 1.8.... at 1.5 I got over 2600 and at 1.8 I got a 3309 and could do better sub some tweaking...right now though kernel is not a separate flash package.
Sent from my Desire HD using XDA App
Um..should be Ingersoll ROM.
Autocorrect fail....
What also helps is be fully charged...do your quad right after fresh boot and stop/shutdown all background processes you can..that's when you get best score.
Sent from my Inspire 4G using XDA App
Edit: hey he just posted his kernel ad a separate package...will make things interesting.
Guys, none of those kernels worked , I had to restore my Android to a previous backup.
Anything I can do?
Sent from my Desire HD using XDA App
Coredroid 5 is based off the the leaked GB rom no custom OC kernels are available. 1500 is about what I get with that rom also. If you want higher quadrant scores you need a froyo 2.2 based rom and kernel.
RootTheNoob said:
Anything I can do?
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
You'll prolly have to download a Rom with an oc kernel and wipe everything before you install it.
May not be what you want to do...but might be the only way to get what speeds you're wanting.
Otherwise...you'll have to wait till there's an oc kernel for the Rom your using.
yelp there isnt Oc of the core with gingerbread.. they do a 2.2 with oc. i havent done those yet cause i do like this gingerbread.. Im just going to keep with this V5.0 MIUI guys have the OC kernal for their gingerbread but they have more steps than i wanna deal with.
Has anyone been successfull? i have tried every OC kernel and as soon as i overclock it just reboots my phone to a freeze (only way out is to either pull the battery or adb reboot). That being said the UV kernel runs fine.
Not sure if it has to do with the I9020A series.
But overall, each NS phone can tolerate its own OC levels. Some phones can tolerate only up to 1.2 GHz, some may be able to achieve 1.4GHz (or beyond). And for some of the unfortunate, some aren't able to OC at all.
Thus this post. I hope my phone is'nt the issue. it would be nice to push a little bit more out of it if i needed it down the line.
I over clocked mine to 1.4 and it was fine, I leave it at 1.0 tho, this friggin thing is quick enough for now.
hmm how do you check your radio. I'm gonna try that as a last resort. And i can set mine as 1.4 but as soon as i run a resource heavy task (n64) my phone locks up and reboot freezes.
themapleboy said:
hmm how do you check your radio. I'm gonna try that as a last resort. And i can set mine as 1.4 but as soon as i run a resource heavy task (n64) my phone locks up and reboot freezes.
Click to expand...
Click to collapse
Not sure why a radio would affect your ability to OC but...
Menu -> Settings -> About Phone -> Baseband Version
the last 3 are what you want to look at "JK8/KB1/KB3"
List all the kernels you've tried. The best in my opinion is Netarchy's 1.3.0.3-CFS kernel using SetCPU
Try intervals of 1.2 GHz too. My phone can only go up to 1.2 GHz
Yeah actually i had tried all of the bfs kernels. I just succeeded in getting Netarchy's 1.3.0.3-CFS kernel. And i can run up to 1.4 . Maybe the brain fk scheduler does not play nice with 9020a's
themapleboy said:
Yeah actually i had tried all of the bfs kernels. I just succeeded in getting Netarchy's 1.3.0.3-CFS kernel. And i can run up to 1.4 . Maybe the brain fk scheduler does not play nice with 9020a's
Click to expand...
Click to collapse
awesome. I just prefer CFS because with BFS the boot animation doesn't show, and it bothers me.
zephiK said:
awesome. I just prefer CFS because with BFS the boot animation doesn't show, and it bothers me.
Click to expand...
Click to collapse
i flashed the BFS first, and lost my boot animation. Then i switched to the CFS, and the boot animation still didnt appear.
Any ideas as to how i can get it back?
Also, is there anyway to recover the stock kernel? I'd like to have it handy to be able to go back to it.
thnks
mixxy said:
i flashed the BFS first, and lost my boot animation. Then i switched to the CFS, and the boot animation still didnt appear.
Any ideas as to how i can get it back?
Also, is there anyway to recover the stock kernel? I'd like to have it handy to be able to go back to it.
thnks
Click to expand...
Click to collapse
Wipe dalvik and cache. Flash a rom that flashes stock. Like cm7 but netarchys is so much better than stock
You can also get ogdobbers which is stock + ext4 + voodoo.
Sent from my Nexus S using XDA Premium App
Hey everyone,
This is an off topic question but does anyone know what happened to the 1.6 OC support for Netarchy? I loved to see the absurdly high quadrant scores and instantaneous screen transitions.
Thanks,
Justin
JTECJ said:
Hey everyone,
This is an off topic question but does anyone know what happened to the 1.6 OC support for Netarchy? I loved to see the absurdly high quadrant scores and instantaneous screen transitions.
Thanks,
Justin
Click to expand...
Click to collapse
you're better off asking that in the netarchy kernel thread in dev forums.
netarchy could answer that... not a lot of phones can tolerate 1.6 GHz Oc
Thanks, yeah i felt a little bad posting the question here. Though ive been an avid user for a long time i have never posted so i didnt have sufficient rites to post in the decelopment section yet : (
Justin
Sent from my Nexus S using XDA Premium App
zephiK said:
Wipe dalvik and cache. Flash a rom that flashes stock. Like cm7 but netarchys is so much better than stock
You can also get ogdobbers which is stock + ext4 + voodoo.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
so cm7 flashes the stock kernel?
mixxy said:
so cm7 flashes the stock kernel?
Click to expand...
Click to collapse
yep! low on bugs and freezes but no voodoo or bln.. dammit
Why when I flash a faux kernel no matter what version it is the Gigahertz always stay the same but when.I flash a bricked kernel no matter what version it goes up to 1.566 times 2.why doesn't the faux kernels ever raise the phones Gigahertz.I only had the Gigahertz go down 1 time with a faux kernel and that when I used the no frills,no thrills overclocking app.and I clocked it to 1.566 and it was killing my battery so I flashed faux kernel v005 and it took it down to 1.5.I couldn't declock it with the app became I found out that the app sucks and it stayed stuck at 1.566 which is 1.6.If anyone has ever experienced a similiar problem or know why these different problems occurred would you please let me know.and I have searched the internet before posting this. Thanks in advance.
Sent from my HTC Sensation 4G
Im absolutely not an expert so sry if my question seems a little stupid but are you flashing a working kernel for your phone??
Whats the name of the rom your running and whats your firmware?
Im running SmartDroids Beserk Rom with Brickeds Kernel and my Sensation XE is running like crazy... with normal batterylife...
clocked it for 584 mhz (min) and 1866 (Max) as std
Hope you´ll get you phone running soon...
Regards
/Lossi
When I install a kernel that OC more than 2700 MHz my phone sticks on Google logo and continuously reboot... If kernel UC and/or OC up to 2700 MHz then phone boots normally
How I can fix it...
CPU SPEED BIN: 1
ACPU PVS: 2.(nominal)
Ok.. I can tell you a fix for this..
Don't overclock to 2700
Ben36 said:
Ok.. I can tell you a fix for this..
Don't overclock to 2700
Click to expand...
Click to collapse
Very "funny" ,but faux kernel basically overclocked on this value and i cannot boot on it.
DimkaTsv said:
Very "funny" ,but faux kernel basically overclocked on this value and i cannot boot on it.
Click to expand...
Click to collapse
Then flash another kernel.
Don't oc above 2.7.. Simple. Or maybe you just need to up the voltage…
Don't do it dummy
Kinda funny I was reading this and the XDA app crashed.
But your phone may just not over clock that high.
Sent from my Nexus 5 using XDA Free mobile app