Database Info

[Completed] [Q] Samsung Note 2 Clone MT6577 not loading into OS after factory reset

Hello Everybody, I think I have brik my phone. This is going to be a long thread, I am only explaining so that I am guided correctly by the members.
Configuration of my Phone:
BB Chip: MT6577
Modem Ver. : MAUI.11AMD.W12.22.SP.V5
UBoot Ver. : 2010.06
Kernel Ver. : 3.0.31-178067 ([email protected]) (gcc version 4.4.3 (GCC)) #1 SMP PREEMPT
Android Ver. : 4.1.1
SW Ver. : ALPS.ICS2.MP.V1
Custom Build verno. : I968.1700.02.02.B.C-V1.0.5B04Q17
Quad Core 1.6
2gb RAM
16GB built-in memory
Around 2 / 3GB ROM.
What I did with it
I installed MTK Droid Tools, SP Flash Tool and other things required to root and flash rom.
I had Android System Recovery e3 installed which did not allow me to install any rom. So I opened MTK Droid Tools, connected my phone, saved scatter file. Next I went to Root, recovery tab, took a complete backup of my phone, installed SuperSU, deleted china. Next I choose 'To choose the boot.img file' selected the original backed up boot.img file, then after few times hitting yes, MTK Droid installed CWM 5.5 to my phone.
I downloaded few custom roms from needrom.com. Entered recovery mode, tried to install from the internal sdcard the roms, CWM reported success but stock ROM did not went away. I tried to install the Android 4.3 ROM, to install google apps dev had told me to install the following file as while using the same method(recovery mode): gapps-jb-20130813-signed.zip
Problem started from here
when I now boot into the phone, many things started to crash, settings, android keyboard etc. I mistakenly went to settings and did the factory reset. Phone restarted, and a green Android robot appeared, blue bars running at the bottom of the robot, a octagon type shape moving in his stomach. It just flashed over the screen and phone restarted again. From then onwards this is the only thing that is happening, no matter I try to go into recovery mode or where, noting works. This is the only screen that appears constantly with 3 secs interval in between each. The only other screen I am able to go is by holding Vol Down, home and power, it takes the phone to factory mode. But it is of no use.
Please help. Have I brik my phone? Is there anything I can do? Phone is not getting detected at MKT Droid Tools, else I would have reinstalled the recovery and boot etc, when connected powered off (with / without battery).
Please help.
Thanks, HardDev!

Hi,
You would need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!

Thank you. Thread closed.

[Completed] [Q] Bricked device( i suppose)

Hi All ,
I have a xolo q1010i which was running on few custom roms previously before I managed to get the flash stock rom from (brieftutorials.com/how-to-unbrick-xolo-q1010i-by-installing-stock-rom/[/url])
Now I used the SP flash tool to unbrick it and install the stock rom, it worked fine until i found that the IMEI was lost.
Still i managed to insert imei using uncle tools and everything was fine.
this is where the problem starts:
I got an update OTA for KitKat and once I updated it the phone was stuck in a loop
So i connected sp flash tool and ran the 4.2.2 stock rom, but suddenly half way I got an error messasge and that was the end.
I have a black screen device on which nothing works, no logo , no charging light, no power + volume up, no power+volume up+down etc .
Not even lights,
Windows says an unidentified device detected and SP flash tool does'nt work.
Have no clue what to do , Is this the end ? or do I have to try the USB Jig / send it for Jtag repair ?
All comments & Ideas appreciated.
Thanks in advance
_____________
Hola,
I managed to resurrect my mobile, I tried Jtag to bypass the preloader by researching a lot ( thanks to my all posts china mobile website) then used SP tools to flash the stock rom ( thanks to Kalaishere XDA )
Finally its working on Jellybean.
I will soon update it and also fix the tiny issue with no imei number

Issue resolved, thread closed, thanks.

[Completed] help with bricked phone

ok i've got a note 4 clone i occidentally bricked it when i tried to flash an miui rom zip in cwm. now It wont turn on anymore ,but it gets detected at the device manager (Mtk usb v com) although it keeps connects and disconnects, what i have is a cwm backup i cant get spft to download the cwm backup i also dont have a scatter file i tried to load an mtk scatter file for the mtk chip 6572 didn't work either spft says there is a mismatch and sometimes DRAM FAIl error messages any ideas?

kinzy2004 said:
ok i've got a note 4 clone i occidentally bricked it when i tried to flash an miui rom zip in cwm. now It wont turn on anymore ,but it gets detected at the device manager (Mtk usb v com) although it keeps connects and disconnects, what i have is a cwm backup i cant get spft to download the cwm backup i also dont have a scatter file i tried to load an mtk scatter file for the mtk chip 6572 didn't work either spft says there is a mismatch and sometimes DRAM FAIl error messages any ideas?
Click to expand...
Click to collapse
Hello, this is herna from XDA Assist.
I´m sorry for what you faced with your device, but this is the main problem about buying and using clone devices. I can´t help with that since there a ton of clones and most of clones use to be very poor devices.
My suggestion is you to try to reach whoever sent you the device or the company which created it, or try to search on Google for someone who also has the device.
As a personal suggestion, if you are out of money, next time you buy a device, and wanna custom it and play with it like you tried with your device, try to reach some Motorola or "most famous" device, where you will have a bigger development under it, and you will have solutions for almost all the troubles.
I wish you get back your device on working, and also wish you to spend a nice weekend.

[Completed] delicious matter !help me! my bricked device keeps re/disconnect with my pc quickly

:silly: delicious matter for xda-developers [!!help me!! my bricked device keeps reconnect and disconnect quickly 3 sec with my pc ;so I can't restore stock rom on my device]
hi guys,since two day I've flashed my device with wrong rom :angel:{I'm not know about flashing wrong rom because I browsed a lot of porting roms subject in some forums then I've become able to flash my device and I've knowledge about this operating but I believed like this "now I owned the world " :laugh:after installing custom recovery cwm and backuping overall the device}.
however I flashed three rom adapted with my tablet before porting the wrong rom.
in abbreviately,after wrong rom the tablet is in boot loop 5 sec and restart,is it stuck in manufacture lego
which are mayhem picture after flashing the wrong rom then restart again .
I try and try again to booting into custom recovery
but is unuseful the tablet not reach custom recovery with pressing (vol.up button +pwr.button)
or reach factory mod with pressing (vol.down button+pwr buttton).
now,I try to fix the problem when connect the tablet with my pc via usb cord
,my bricked device reconnect & disconnect with pc quickly almost 3 sec ,usb cable otg is perfect functional though
is it occurring (I able to driving the tablet but I am not able to flashing with flashing tools such as : sp flash tool & mtkdroid tools)
the trouble is not fix when pressing (vol.up or vol.down or both these or both these with pwr or pwr alone ) before plug otg cable with my pc.
I searched and watched solved mtk problem on youtube but my trouble is not similar anything of this problems
and nothing about this on sites and forums.:crying:
in addition to :
I disassembly the case of my tablet and disconnect the battery connection with tablet motherboard
but same result.
!!!!please tell my how to fix this trouble!!! and able to flash stock rom
detail device
name :CCIT A799W (china tablet)
cpu :mediatek 6572
intsd: 8G
RAM : 1g
ANDRO: 4.2.2 (jellybean)
board: HX-M706-MB-V1.1.0
N.B: the wrong rom is Lollifox_MT6572_Kitkat_Ajit_mtkroms-com exactly. they say: for mt6572 only (not mt6572 running kitkat )
for more info tell me and good luck for every body .

mohamed thebear said:
:silly: delicious matter for xda-developers [!!help me!! my bricked device keeps reconnect and disconnect quickly 3 sec with my pc ;so I can't restore stock rom on my device]
hi guys,since two day I've flashed my device with wrong rom :angel:{I'm not know about flashing wrong rom because I browsed a lot of porting roms subject in some forums then I've become able to flash my device and I've knowledge about this operating but I believed like this "now I owned the world " :laugh:after installing custom recovery cwm and backuping overall the device}.
however I flashed three rom adapted with my tablet before porting the wrong rom.
in abbreviately,after wrong rom the tablet is in boot loop 5 sec and restart,is it stuck in manufacture lego
which are mayhem picture after flashing the wrong rom then restart again .
I try and try again to booting into custom recovery
but is unuseful the tablet not reach custom recovery with pressing (vol.up button +pwr.button)
or reach factory mod with pressing (vol.down button+pwr buttton).
now,I try to fix the problem when connect the tablet with my pc via usb cord
,my bricked device reconnect & disconnect with pc quickly almost 3 sec ,usb cable otg is perfect functional though
is it occurring (I able to driving the tablet but I am not able to flashing with flashing tools such as : sp flash tool & mtkdroid tools)
the trouble is not fix when pressing (vol.up or vol.down or both these or both these with pwr or pwr alone ) before plug otg cable with my pc.
I searched and watched solved mtk problem on youtube but my trouble is not similar anything of this problems
and nothing about this on sites and forums.:crying:
in addition to :
I disassembly the case of my tablet and disconnect the battery connection with tablet motherboard
but same result.
!!!!please tell my how to fix this trouble!!! and able to flash stock rom
detail device
name :CCIT A799W (china tablet)
cpu :mediatek 6572
intsd: 8G
RAM : 1g
ANDRO: 4.2.2 (jellybean)
board: HX-M706-MB-V1.1.0
N.B: the wrong rom is Lollifox_MT6572_Kitkat_Ajit_mtkroms-com exactly. they say: for mt6572 only (not mt6572 running kitkat )
for more info tell me and good luck for every body .
Click to expand...
Click to collapse
Greetings,
Thanks for using XDA Assist.
There are no specific forums for your device so I ask that you post your questions here:
Android Q&A, Help and Troubleshooting
The experts you'll find there may be able to help you.
Good luck!

ROM/firmware flash!

Hi there,
Please I have a Samsung tablet
SM-T311 didn't know its a clone phone, always having a problem with space, so I tried to format and clear cache, it got stocked on Android logo, so I used sp flash tool which let me to a dark screen, but PC can dictate device, it makes a sound when I plug device to PC, and after a few minutes, sound will signal again as when you unplug device. Please I need a firmware to this device please, I got one when I tried to use via sp tool, I got an error message
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL"
Please I need a firmware . device is a clone SM-T311 tablet mtk 6582 running on android 4.2.2 jelly bean.
Please help!!!!