Hi there,
Please I have a Samsung tablet
SM-T311 didn't know its a clone phone, always having a problem with space, so I tried to format and clear cache, it got stocked on Android logo, so I used sp flash tool which let me to a dark screen, but PC can dictate device, it makes a sound when I plug device to PC, and after a few minutes, sound will signal again as when you unplug device. Please I need a firmware to this device please, I got one when I tried to use via sp tool, I got an error message
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL"
Please I need a firmware . device is a clone SM-T311 tablet mtk 6582 running on android 4.2.2 jelly bean.
Please help!!!!
Related
My phone was ok. I installed cwm recovery by mtk dorid tool. But , I wanted to install TWRP recovery by a pc software- during installation a warning message appeared and I clicked ok (something formatted – I did not remember). Then I lost my mobile network signal, null imei and null baseband. Then I install N9500_MTK6589_Miui_Revolution_4.5.23_Cwm via CWM recovery (2 times, but system closed automatically. But, third time after installation phone totally bricked ). Basically phone starts with startup sound, but with crushing screen. I was able to connect mtk dorid tool and it says Model: N9500- null baseband-null imei, then I tried to Install CWM recovery. Then phone totally bricked without starting. I tried everything from google to solve. Then I was able to firmware upgrade – stock rom (Only one time). Now, stock rom is not downloading. I used all sp flash tools. All the times one error appears –Brom Error: S_FT_Enable_DARM_Fail (4032).
Please anyone help me. (My Pc Detect My Phone as preloader usb vcom port, I am using windows 8.1 64 bit, no issue with driver software and sp flash tool)
Device Name: Symphony w 92, MTK 6589 , 1.2 GHz ,Quad Core , 4 GB rom . 512 Ram, 5 inch Capacitive Full Touch, (854*480),8MP Primary (Flash light) + 2MP Secondary.
Please Help me to solve .
Hi,
I can't find anything relevant on XDA for your device. Be sure anything you flash is for your exact make and model number of your device. Otherwise very bad outcomes can occur.
You will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
ok i've got a note 4 clone i occidentally bricked it when i tried to flash an miui rom zip in cwm. now It wont turn on anymore ,but it gets detected at the device manager (Mtk usb v com) although it keeps connects and disconnects, what i have is a cwm backup i cant get spft to download the cwm backup i also dont have a scatter file i tried to load an mtk scatter file for the mtk chip 6572 didn't work either spft says there is a mismatch and sometimes DRAM FAIl error messages any ideas?
kinzy2004 said:
ok i've got a note 4 clone i occidentally bricked it when i tried to flash an miui rom zip in cwm. now It wont turn on anymore ,but it gets detected at the device manager (Mtk usb v com) although it keeps connects and disconnects, what i have is a cwm backup i cant get spft to download the cwm backup i also dont have a scatter file i tried to load an mtk scatter file for the mtk chip 6572 didn't work either spft says there is a mismatch and sometimes DRAM FAIl error messages any ideas?
Click to expand...
Click to collapse
Hello, this is herna from XDA Assist.
I´m sorry for what you faced with your device, but this is the main problem about buying and using clone devices. I can´t help with that since there a ton of clones and most of clones use to be very poor devices.
My suggestion is you to try to reach whoever sent you the device or the company which created it, or try to search on Google for someone who also has the device.
As a personal suggestion, if you are out of money, next time you buy a device, and wanna custom it and play with it like you tried with your device, try to reach some Motorola or "most famous" device, where you will have a bigger development under it, and you will have solutions for almost all the troubles.
I wish you get back your device on working, and also wish you to spend a nice weekend.
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
rudycroes said:
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
Click to expand...
Click to collapse
Hello,
Please try posting your query here Ask any Query Newbie friendly with all relevant details, the experts there maybe able to assist you.
-Vatsal
Please I need some working link to ROM to this phone , I tried lots of roms and always says "Enable DRAM Failed", drivers are alright and preloader working(appears in device manager). i tried also firmware upgrade but nothing works I think because this mobile is clone and has different rom from original A850. As you can see at the front of mobile is placed home not lenovo logo (at down in middle of digitizer) . Also tried different version of SP Flash tools but all said the same error. In other way I tried push buttons before connecting to pc still the same. I check the procesor and is MTK6582, has kcolo point but preloader working so its dont needed now. Thank for your time and hope somebody for help!
back of phone https://postimg.org/image/h7igdxesz/
Front of phone https://postimg.org/image/6ypz83qr7/
Battery case https://postimg.org/image/8f1hq8to3/
Placeboard(DPS) https://postimg.org/image/bn5z3afxv/
hello pls help me i bought a coolpad 8298-A01 working well with no issue so i tried to install gapps because it has none ..so i took google to get a twrp for it and i did not get any so i tried to port but got my device bricked after flashing device kept on rebooting ..now i search for the firmware online and i got it and try flashing it all Sp Flash Tool not working giving error ONLY v5.1532 that flashed it 100% but the device is not powering on nore even responding to charge only show red light when i connect to socket and system still detect it,,,please i need help
PHONE-COOLPAD_8298-A01
ANDROID VERSION - 5.1
CHIP -MT6735
RAM -2GB
ROM -8GB
THAKNS