[Completed] [Q] Samsung Note 2 Clone MT6577 not loading into OS after factory reset - XDA Assist

Hello Everybody, I think I have brik my phone. This is going to be a long thread, I am only explaining so that I am guided correctly by the members.
Configuration of my Phone:
BB Chip: MT6577
Modem Ver. : MAUI.11AMD.W12.22.SP.V5
UBoot Ver. : 2010.06
Kernel Ver. : 3.0.31-178067 ([email protected]) (gcc version 4.4.3 (GCC)) #1 SMP PREEMPT
Android Ver. : 4.1.1
SW Ver. : ALPS.ICS2.MP.V1
Custom Build verno. : I968.1700.02.02.B.C-V1.0.5B04Q17
Quad Core 1.6
2gb RAM
16GB built-in memory
Around 2 / 3GB ROM.
What I did with it
I installed MTK Droid Tools, SP Flash Tool and other things required to root and flash rom.
I had Android System Recovery e3 installed which did not allow me to install any rom. So I opened MTK Droid Tools, connected my phone, saved scatter file. Next I went to Root, recovery tab, took a complete backup of my phone, installed SuperSU, deleted china. Next I choose 'To choose the boot.img file' selected the original backed up boot.img file, then after few times hitting yes, MTK Droid installed CWM 5.5 to my phone.
I downloaded few custom roms from needrom.com. Entered recovery mode, tried to install from the internal sdcard the roms, CWM reported success but stock ROM did not went away. I tried to install the Android 4.3 ROM, to install google apps dev had told me to install the following file as while using the same method(recovery mode): gapps-jb-20130813-signed.zip
Problem started from here
when I now boot into the phone, many things started to crash, settings, android keyboard etc. I mistakenly went to settings and did the factory reset. Phone restarted, and a green Android robot appeared, blue bars running at the bottom of the robot, a octagon type shape moving in his stomach. It just flashed over the screen and phone restarted again. From then onwards this is the only thing that is happening, no matter I try to go into recovery mode or where, noting works. This is the only screen that appears constantly with 3 secs interval in between each. The only other screen I am able to go is by holding Vol Down, home and power, it takes the phone to factory mode. But it is of no use.
Please help. Have I brik my phone? Is there anything I can do? Phone is not getting detected at MKT Droid Tools, else I would have reinstalled the recovery and boot etc, when connected powered off (with / without battery).
Please help.
Thanks, HardDev!

Hi,
You would need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!

Thank you. Thread closed.

Related

[Q] android tab 10 help

hello,
i ve' bought a tab from ebay. i don't like how it moves and tried to install an other image. searched on few forums, but can't find any good help.
pls help me with a custom image that work on my tablet.
here are the info's from "about device":
Model number: Android Tab 10
Kernel: 2.6.32.9 [email protected] #137
Android version: v 2.3 2011-09-01 (001112)
Build number: FRF85B
tried to install Tim6a or other from SD, but the tablet won't enter in recovery mode. the tablet i see that is rooted (or not?), tried many combinations (power+vol up, power+menu, etc), but no luck.
installed superuser, received the message su is outdated, tried to update, but say "seems to have write permission on system like s-on". how can i s-off? with unrevoked forever?
pls help me, because my wife is very uppset of me spending a lot of time with this tab to "tune"...
thx.
calin.
p.s.: is the model with only one tf card slot, 512m ram and 4g hdd (SD CARD)
nobody?
ok, i answer myself: if you want to enter in recovery mode, press "home+back+power" it in couple of seconds you will see a message to tell you to push the right combination to enter in recovery mode in less than 5 seconds; this combination is home+back. then you are in recovery mode.
btw, i'm stuck here: entered in recovery, tried a lot of rom's (tim6, flanflingers, etc) in a lot of formats (android folder, separate img files, 2 firmware files, etc) but allways receive a message: "extracting data failed, please check your zsys.img".
where is the problem?

led telechips 8902 (arm11) android ss

Hi ya
I'm new to this and need a little help. I've been given a non-branded android tablet, when i connect it to my pc it is showing up as a android eclair, and within the settings of the android it's is listed as a android s22... The issue i'm having is that i want to factory restore the device but this keeps failing when i try via the privacy option, i choose the factory restore and erase everything and as soon as i select this the device shuts itself off ... and when i restart it, it just loads up as normal with the settings still in place... the firmware version is 2.2 , kernel version is 2.632.9#344 and the build number is ver2.20128.20101213-162053 ...
So i would really appreciate any advice on how I can factory restore this device....

Please Help me Starting My Nexus S GT I-9020

Dears
Recently I rooted my nexuys s GT -i9020 , and also installed touch clockwork mode recovery . today i was installed one software and I am granted superuser permission to him, the name of the software is forgotten from me, but when I opened that software my phone is restarted and hanged on Google's logo startup screen.
THEN I WIPED ANY THING ON MY NEXUS S, SUCH AS FACTORY DATA RESET, AND USB STORAGE AND FORMAT SYSTEM ETC
I also completely formatted all the data on my phone and
Now when I am pushing the power button it directly going to recovery mode and the option on my screen are.
FASTBOOT MODE - NO BOOT OR RECVOERY IMG
PRODUCT NAME - HERRING
HW VERSION - REV 11
BOOTLOADER VERSION - I9020XXLC2
BASEBAND VERSION - I9020XXKL1
CARRIE INFO - KIT
SERIAL NUMBER - 3035C767C6600EC
LOCK STATE - UNLOCKED
SELECT - VOLUME UP OR VOLUME DOWN
EXCUTE - POWER
Please help Me that how to solve this problem, and also tell me that if there is easiest method to install kitkat on my phone because this is my dream to see kitkat 4.4.2 on my nexus s GT -I9020
AND ALSO SHARE ME SPECIFIC USB DRIVERS OF THIS PHONE ,
THANKS
REGARDS!!!!!!!!!!!!!!!!!!!!!!!!
http://www.droidviews.com/nexus-s-guide-unlock-bootloader-root-install-custom-recovery-custom-roms/
I visited this site many times but this website is not helpful for me because there is no link to download custom roms, And also I dont know that what type of ROM is suitable for me please share a good custom Rom for me and also method of installing custom Rom .
I will be very thankful to you
Download Nexus Root Toolkit if you're too lazy
Please close this thread
My problem is Solved Thanks XDA Team
I was Installed CM10.2 And nice working for me
THANKS AND REGARDS
ALL CREDIT GOES TO XDA TEAM!!!!!!!!!!

[Completed] Solve Symphony w 92 MTK 6589 Dard Bricked

My phone was ok. I installed cwm recovery by mtk dorid tool. But , I wanted to install TWRP recovery by a pc software- during installation a warning message appeared and I clicked ok (something formatted – I did not remember). Then I lost my mobile network signal, null imei and null baseband. Then I install N9500_MTK6589_Miui_Revolution_4.5.23_Cwm via CWM recovery (2 times, but system closed automatically. But, third time after installation phone totally bricked ). Basically phone starts with startup sound, but with crushing screen. I was able to connect mtk dorid tool and it says Model: N9500- null baseband-null imei, then I tried to Install CWM recovery. Then phone totally bricked without starting. I tried everything from google to solve. Then I was able to firmware upgrade – stock rom (Only one time). Now, stock rom is not downloading. I used all sp flash tools. All the times one error appears –Brom Error: S_FT_Enable_DARM_Fail (4032).
Please anyone help me. (My Pc Detect My Phone as preloader usb vcom port, I am using windows 8.1 64 bit, no issue with driver software and sp flash tool)
Device Name: Symphony w 92, MTK 6589 , 1.2 GHz ,Quad Core , 4 GB rom . 512 Ram, 5 inch Capacitive Full Touch, (854*480),8MP Primary (Flash light) + 2MP Secondary.
Please Help me to solve .
Hi,
I can't find anything relevant on XDA for your device. Be sure anything you flash is for your exact make and model number of your device. Otherwise very bad outcomes can occur.
You will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!

[Completed] iRulu x9 16 gig 4.42 firmware needed

After rooting this tablet I immediately started having WiFi issues, plus each boot or power cycle would trigger a factory erase. By placing my apks in the preinstall folder all of my apps would be replaced each time, but personal data and setup were deleted.
Due to this I started using Kernal Auditor to soft reboot. Somehow I managed to hit " reboot to boot loader " and now my tab is stuck dead on first android logo screen. I downloaded the Phoenix suite and a ROM that was supposed to work but Phoenix refuses to flash it.
Astar_y3 KVT49L A33 realtek WiFi etc... It was a release key but I would be happy with any firmware that would work for this. I am currently trying to I stall a minimal like ux on my xp PC and will be better set to communicate with the phone.
I was also wondering I'd it would be possible to load a Linux distro on this tablet????
Ky2T said:
After rooting this tablet I immediately started having WiFi issues, plus each boot or power cycle would trigger a factory erase. By placing my apks in the preinstall folder all of my apps would be replaced each time, but personal data and setup were deleted.
Due to this I started using Kernal Auditor to soft reboot. Somehow I managed to hit " reboot to boot loader " and now my tab is stuck dead on first android logo screen. I downloaded the Phoenix suite and a ROM that was supposed to work but Phoenix refuses to flash it.
Astar_y3 KVT49L A33 realtek WiFi etc... It was a release key but I would be happy with any firmware that would work for this. I am currently trying to I stall a minimal like ux on my xp PC and will be better set to communicate with the phone.
I was also wondering I'd it would be possible to load a Linux distro on this tablet????
Click to expand...
Click to collapse
Greetings and welcome to assist. Unfortunately I can't find any information for your device on xda. It is possible to run linux on most tablets but each device is different. There is a guide for a similar device here
https://forum.xda-developers.com/th...dd-gui-desktop-linux-to-aol-base-yt2-t3244681
Good Luck
Sawdoctor

Categories

Resources