1. Download material
https://drive.google.com/folderview?id=0Bwc06sK8sOdIcjdxSE1WM214bzQ&usp=sharing
Mirror: https://www.dropbox.com/s/kenzqj9o6wcxedq/bahan.rar?dl=0
2.Install apk existing third in the palace folder . " Hack connectivity " it xposed module , must already know how to use the right . Do not forget to reboot .
3. turn on usb debugg , cable plugs into the PC . ( of this step you can skip to step 4 or directly view this video or download video https://www.youtube.com/watch?v=2L4x8VUhqbY https://drive.google.com/file/d/0Bwc06sK8sOdIdFNwNkMyQlRidFk/view?usp=sharing Mirror: https://www.dropbox.com/s/n44ebkjc3bpsi0g/How to reverse tethering.wmv?dl=0)
4.Extract ReverseTethering_3.19.zip , open AndroidTool.exe .
5.Copy adb_usb.ini to C : \ Documents and Settings \ Administrator \ .android .
6. Return to the agan AndroidTool.exe open earlier , select Tools > Kill ADB , close open again AndroidTool , later devicenya appears , select dns , dns check ( ok ) . click connect , if already connect later SuperSU ask permission for usbtunnel .
7. If already connect your turn tethring hotspot , and try the browser . finished .
method by me
All credit goes to :
http://forum.xda-developers.com/showthread.php?t=1371345
https://www.facebook.com/dj.rangga ( for adb_usb.ini )
Related
Hello all , i post my new guide to change icons without using apktool . This guide is for newbies though other all advance developer may think this useless or may be they known this a very ago.
# Note :-
1) This guide is for all newbies who want to edit there app icons , but dont have apktool or have no knowledge about it .
2) This guide is only applicable for system apps .
3) You should have knoweledge for flashing zips by CWM .
# What is needed ?
1) A must have computer with paint (opptional) [ some phones with Zarchiver app can be used . ]
2) WinRar
3) A flashable zip file supplied by other developer .
4) A icon Set which you want to replace with .
# Procedure :-
1) Make a directory called " stock " .
2) Paste your app in it .
3) Below i have taken SystemUI.apk.
4) Rename that app to SystemUI.zip ( just make .apk to .zip format )
5) Then go to options (press right mouse button) press Extract to SystemUI
6) After extracting go to the extracted folder " SystemUI"
7) Browse to res / drawable-mdpi / you will find all icons there . ( In my case its mdpi , it may be hpdi .)
8) Note that the resolution must be same or it may not look good . [ Expiremental ]
9) Replace the icon which you want to from your icon set .
10) Go back to folder where you will find folders like META-INF , res , & files like AndroidManifest.xml , classes.dex, resources.arsc .
11) Now select that all files and press the right button of the mouse ( the options button) .
12) Select the Add to Archive option .
13) Now keep the same name of the app you are modding and select " zip " .
14) A new zip file is created like " SystemUI.zip" . Rename it to SystemUI.apk ( just from .zip to .apk )
15) Now your modded app is ready .
16) Take the flashable zip provided by other developer .
17) open that zip and replace your file with his . ( in folder system/app/ " replace here ." )
18) Save the zip . And Flash it using CWM !!! Enjoy now you can see your modded icons .!!
I will post xml editing guide for newbies afterwards .
One Way .. First You Wait For Next Update . On That OTA Update .zip File ..
Eg Location : I337_NC1 to NI1_OTA_Update\patch\system\app\TetheringProvision.odex
Replace With http://forum.xda-developers.com/showthread.php?t=2535141 In This Link You Can Download The TetheringProvision.apk
Or Below Attached Check
TetheringProvision.apk and TetheringProvision.odex . Rename them to any name that you want, or just change apk and odex to bak .
Then Again .zip It. Then Update Via abd Sideloader
We Can Use This Method To Update Our Phone :
1) Install Samsung USB Drivers
2) Start Samsung Recovery [ Volume Up + Home + Power ]
3) Select " Apply Update From The ADB "
4) On PC : Install Minimal ADB and Fastboot Software ... Then Put The Update File (ZIP) On The Same Folder
5) Open Minimal ADB and Fastboot : After Type : - adb sideload FILE NAME.zip
5) Updated Successfully.
Afterwards Just Turn On Wifi Tethering / Hotspot .. It Will Works :laugh:
My Friend Tried This Method . Till Now I Didn't Try ..
Take U'r Own Risk
HII THERE !!
DID U LOST YOUR IMEI WHILE FLASHING ? FORMATTING ?
HERE IS SOLUTION FOR ALL THIS FUSS
REQUIREMENTS :
WINDOWS
CDC DRIVERS
MOBILE DRIVERS
MIUI META 3G (TORRENT)
USB CABLE
BRAIN
PATIENCE
COFFEE (OPTIONAL)
STEPS TO BE FOLLOWED :
STEP 1 :
INSTALLING CDC DRIVERS :
1.DOWNLOAD CDC DRIVERS FROM HYPERLINKS IN REQUIREMENTS
2. IF YOU ARE ON XP THEN REFER THIS LINK : http://forum.gsmhosting.com/vbb/f723/install-andriod-cdc-driver-andrid-imei-mtk-debug-modem-1636173/
IF YOU ARE ON WINDOWS 7 ,8 ,8.1 THEN : http://forum.xda-developers.com/and...installing-cdc-drivers-windows-8-tut-t3001353
3.OPEN MIUI META 3G
4.GOTO OPTION AND SELECT CONNECT SMART PHONE IN META MODE
5. CONNECT UR PHONE IS SWITCHED OF STATE AND WAIT FOR MIUI META TO BE RECOGNIZE IT ....
6.AFTER IT IS CONNECTED OPEN IMEI DOWNLOAD FROM DROPDOWN BESIDE USB COM OPTION
7.IMEI DOWNLOAD WILL OPEN U NEED TO CHANGE NVRAM DATABASE WHICH IS INCLUDED IN UR FIRMWARE U CAN GOOGLE AND FIND IT
8. ENTER YOUR IMEI AND LAST DIGIT (CHECKSUM IS LAST DIGIT )WILL BE RECOGNIZED AUTOMATICALLY DONT CHANGE ANYTHING
9.CLICK ON DOWNLOAD TO FLASH AND YOU ARE DONT
THANKS FOR READING THIS TUTORIAL
DOWNLOAD ATTACHMENT EXPLAINED WITH SCREENSHOT
Hi.all
Firmware : https://drive.google.com/file/d/0B1Wlhv05MNhaWUk1aUwtaW9NQzQ/view?usp=drivesdk
flash Tool : https://drive.google.com/file/d/0B98IBCmpSlvrLWtlRU1GdXZvNE0/view
Qallcomm Driver : https://drive.google.com/folderview?id=0B1Wlhv05MNhadWMzZU9LdThmM1U
0 ) install Qallcomm Driver.
1 ) install ( .net framework )
2 ) open flash Tool
3 ) load soft folder ,( firmware folder )
4 ) Select ( mbn ) programmar file
5 ) load ( XML ) file ( Raw program ) Select path0
6 ) Hit DOWNLOAD
All Done.
( if ur wind 3 has hard Bricked , PC not detacts ur phone , then . dismantle ur phone & Remove the battery Connection from phone & put ur USB cable . back side of PC , then press vol + (or) - now connect phone., if Not success , Try Emergency Download , ports Under Sim slot Short cicute 2 dots ,, for emergency port help search in googles )
Thanks & sorry for my bad english
Hey frnd my phone has lost its USB connectivity and proximity sensor isn't responding how to get it work back plz help
Guys! I have written a post about how to flash stock rom in lyf wind 3
please check this out. it might helps you and if not then leave your feedback there.
Is anyone have kernel source code for lyf wind 3?
How to do this without Pc
How to install without Pc
Install this in Android??
AnirudhSuryavanshi said:
How to install without Pc
Install this in Android??
Click to expand...
Click to collapse
Unfortunately you need computer for the flashing process.
Hello everyone ,
This is my firt's tutorial !
Today i'm going to teach you how to root your phone ( in my case it's a Ulefone Germini Pro ) and restore IMEI's.
/!\ATTENTION/!\ i don't take any responsability for anything that happen to your phone ! So do it at you own risk ! /!\
Before starting , my phone as a MTK chipset , so i don't advise you to try this if your chipset isn't a MTK ! And you need a OTG cable with a mouse !
Lets go :
TO ROOT [WORKS FOR ULEFONE GERMINI PRO] :
Important be sure to download PDANET it will solve alot of problems with the drivers !!
0-Enable USB DEBUGGING
1- Download the stock rom of your phone and check if is the same version as your phone ! ( exemple : my phone is an android 7.1.1 so i need to download the stock room version 7.1.1)
2- Download the drivers : http://www.devfiles.co/download/0InO9P5m/MT65xx_USB_VCOM_DRIVERS.zip and install them !
3-Download twrp (recovery.img) : https://mega.nz/#!8f43VYLa!o-elPp74o35tm3AdtcW1wVbFnBHIGi_dUP7skWWGmOM
4-Download Modified Boot (boot.img) : https://mega.nz/#!sHQxySJL!MRqtD6-VoZMLyEpr-ym7LlktiMR0GXYKUuLZlpbxhE0
5-Download latest version of SPFlash Tool : http://spflashtools.com/category/windows
6-Now you need to download SuperSu , but this one as to be downloaded with your phone directly on you need to put it on a sdcard , as you want !
here's the link : https://download.chainfire.eu/supersu-stable
7- Run Flashtool.exe
8- Choose scatter file ( it's on your downloaded Stock Rom )
9- Untick everything
10- Tick recovery
11 - Click on location to choose the custom recevery.img ( you downloaded before )
12 - double check only recovery is tick
13- Turn off you phone and plug it one time and check if the pc detect's it
14 - Unplug it
15 - So now the phone stills off , on sp flash tool click download
16- Plug your phone and wait few seconds
17 - the flashing should start
18 - if all go well you could see a green arrow on the program
19 - now untick recovery
20 - tick boot
21- click on location and find your custom boot.img
22 - and flash it the same way as recovery.img
23 - Now as a said before if you have downloaded SuperSu direclty in your phone , just turn it on by pressing power + volume UP
24 - You should see a little menu , use volume up to choose recovery and volume down to confirm it
25-TWRP should appear
26 - Put the otg cable on your phone and plug a mouse on it
27 - you should get a message asking to modify system , with the mouse slide to authorize
28 - after that click on install
29 - choose the superSU.zip where you download it
30 - slide to flash it
31 - Reboot and you should get rooted
32 - Enjoy
TO RESTORE YOUR IMEI'S :
You need :
-PC
-The Program
-The Stock room you downloaded before
- The drivers
- The box of your imei's
Let's go :
0- Download the program
http://www12.zippyshare.com/v/UafLqKD2/file.html
Important be sure to download PDANET it will solve alot of problems with the drivers !!
1- Start the program
2- Go to help about sn and check that you have a new version mine is : 1.1604.00
3- Comport : select USB VCOM
4- Target Type : Select SmartPhone
5- click on system config
6- tick imei and dual imei ( if you have 2 imei's else tick only imei )
7- click on MD1_DB and choose a file in your stock rom that the name start like this :
MDDB_InfoCustomAppSrcP_MT6797_S00_MOLY_LR11_W1603_MD_MP_V62_4_P3_1_ulwctg_n.EDB
Be sure to check that and the end of the file is a .EDB
8- click on AP_DB and choose a file in you stock room that the name is start like this :
APDB_MT6797_S01_alps-mp-n1.mp9_W17.18
Be careful you stock room can contain to files choose the one that end with a number and not with a ENUM
9 - click on save
10 - power off you phone and disconnect it from the pc
11- press start
12 - put you imei's
13 - press ok
14 - connect your phone
15- if it's all okay you should see a message with passed on it ! IF it fails try again one time because my firts time failed too
16 - After getting the message passed , disconnect your phone and turn it on !
17 - You should get your imei's back !
18 - ENJOY !!
Credits :
Annubiis : For helping with my phone.
RAMANDEEP SINGH from androidweblog.
dodos from bbs.elephone .
If it helped you click on say thank's and if you need help comment this post !
Thanks alot bro it worked for my lenovo k8 plus dual sim phone...... and also PdaNet is must i understood.....
Redmi note 7 pro working ?
Mine is Samsung m10s, exynos, latest version Android 11. Do u think it will woerk on my phone, actually my phone says imei NG status and I'm unable to make calls, mobile data or sms. Please help me