Related
At last found the way to flash our phones with "Windows 8 x64"
I flashed my CHD with 4.2.1 orginal stock fw in the following steps:-
1) download Usbdeview
http://www.mediafire.com/download/41i2k36yyi1fzhz/usbdeview-x64.zip
2) unistall all the MTK65xx drivers u get in it (remember to use this as admin)
3)Reboot ur PC
4)Download Sp drivers for win8
http://www.mediafire.com/download/7yee2of64nhl947/SP_Drivers_v1.4.rar
5)Now open Device manager (right click on My Computer>Manage>Device manager)
6)Remove the battery and connect the phone via USB u will see unknown device in device manager and then MTK65xx Preloader
7)Quickly Right click on the MTK65xx preloader and update driver go for manual and then give the path for sp tools and just select the folder inside SP tools
8) u will c dialouge box asking for installing here select install anyway
9)and u r done.. u will here sound of disconnected device
10)connect again and u will c your device appearing and dissapearing on COM ports
11) Now open sp flash tools use this 1
http://www.mediafire.com/download/wd8au297r6w9qzd/SP_Flash_Tool_v3.1304.0.119.rar
12)dont forget to open sp tools in admin mode..
13) select the scatter file and make sure u have disconnected ur phone
14) select USB in options and force to high speed
15) Press Firmware Upgrade and then insert USB cable to ur phone
16) Sit back for 5-6 min until u c a green circle on ur screen.
as soon as u see green circle just remove the USB cable and plug in ur battery and boot your mobile
Digital signature error
when i try to install the drivers through your procedure it shows an error that the third party inf does not contain digital signature information
Not able to update A116 4.2.1 on Win8 x64
Tried numerous times. I Above mentioned procedure does not work! Certificate error shows up!
It did work. Thanks. The preloader will really disappear but as you use the flash tool it will automatically detect the driver.
PERMANENT SOLUTION OF IMEI IN CANVAS 2+
MANY PEOPLE ALWAYS SUFFER PROM THIS PROBLEM INVALID IMEI IN CUSTOM ROM OR STOCK ROM
SO,HERE I BROUGHT PERMANENT SOLUTION OF IMEI ON CANVAS 2+
**DOWNLOAD-LINKS**
1. IMEI_FILES;- http://d-h.st/L5N
2. IMEI_TOOL;- http://d-h.st/WDg
3. Cdc Driver :- http://d-h.st/riS
**REQUIREMENT**
1. PC
2. MINE UPLOADED FILES
3. LITTLE KNOWLEDGE AND MIND
**PROCEDURE**
1. EXTRACT IMEI_FILES AND IMEI TOOLS ON THE DESKTOP OF UR PC
2. NOW OPEN IMEI TOOL ( IMEI&SN Writer.exe)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. NOW IN PLATFORM SELECT SMARTPHONE AND SELECT USB (SEE BELOW PLATFORM IN TOOL)
4. IN WRITE TOOL TICK IMEI 1 AND IMEI 2 AND WRITE THERE BOTH UR IMEI
5. NOW CLICK ON SELECT DB AND BROWSE TO THE FOLDER DATABASE AS DIRECTED IN STEP 2
6. SELECT THE FILE WHICH IS IN DATABASE FOLDER AND AGAIN IT ASK U TO SELECT AP FILE
7. THEN SELECT FILE WHICH IS IN AP FOLDER AND CLICK ON START
8. NOW SWITCH OFF UR CELL AND CONNECT
9. NOW GO TO DEVICE MANAGER ( BY RIGHT CLICK ON MY COMPUTER ICON AND CLICK ON PROPERTY ,AFTER OPENING WINDOW CLICK ON DEVICE MANAGER FROM SIDE BAR IN WIN 7 AND ABOVE...
10. AFTER OPENING OF DEVICE MANAGER ,GO TO CDC DRIVER WHICH WILL SHOW RED OR YELLOW CROSS SIGN ,NOW RIGHT CLICK ON AND CLICK ON UPDATE DRIVER .
11. NOW EXTRACT THE CDC DRIVER IN NEW FOLDER ANYWHERE AND BROWSER TO THE CDC DRIVER LOCATION AMD SELECT FOLDER AND CLICK OK TO UPDATE THE CDC DRIVER.. AFTER SUCCESSFULLY DONE
12. AGAIN CLICK ON START AND CONNECT UR PHONE ....NOW IT WILL WRITE IMEI PERMANENTLY
13. AFTER PROCESS FINISH REBOOT AND ENJOY.....[/SIZE][/FONT]
NOTES:-
1. THIS WILL NEVER GIVE U INVALID IMEI ERROR DURING FLASHING ANY ROM OR CHANGING ANY ROM.
2. WHEN U FORMAT UR CELL THROUGH SP FLASH TOOL THEN ONLY IT WILL SHOW INVALID IMEI..
3. THIS IS UNIVERSAL METHOD SO IT WILL WORK ON ALL MEDIATEK CHIPSET WHOSE GETTING INVALID IMEI.
4. FOR OTHER MEDIATEK CHIPSET USER U NEED UR STOCK DATABASE FILE (BASEBAND FILE AND AP FILE)
5. THIS WILL ONLY WORK WHEN U GET INVALID IMEI THEN DO THIS PROCESS AND U GET FREE FROM INVALID IMEI PROBLEM
CREDITS:-
1. [email protected]
2. IMEI TOOL MAKER (DON'T KNOW WHO MAKE THIS WONDERFUL IMEI TOOL)
3. PRATEEK SINGH (TESTER)
in d imei 1 n 2 nothing comes up and everything skips
Ayaorei said:
in d imei 1 n 2 nothing comes up and everything skips
Click to expand...
Click to collapse
for which phone u trying and make sure u installed driver properly
Sent from my A110Q using XDA Premium 4 mobile app
hi bro thanks a lot for ur support,
but i dont have my stock rom for my micromax a110,so could u give me the required files kindly,
if u want i can give u my imei no.s
pls help me.
i'm in miui v5 rom, in this even i'm not getting my imei no.s from engineering mode>cds info> radio info> phone1 Phone2 paths as this cds info button is not enabled there to press it. but i've a doubt here i've flashed ultimate galaxy v2 rom even in that i got d same problem for imei but in engineering mode i'm able to go to cds info> radio info> phone1...... & i got my imei back in that rom, but i'm not getting in this rom.
so kindly help me
thanks a lot in advance
not help ful
i firstly flashed stock rom 1 and then applied this patch but now first sim works fine but second sim does not work there is a cross on second sim
i tryed to connect manualy to network no effect al forbidden networks present
and i put sim in other phone it works fine
how to make my sim work on my canvas 2 + which is gone through system storage increase
Saurabh mulik said:
i firstly flashed stock rom 1 and then applied this patch but now first sim works fine but second sim does not work there is a cross on second sim
i tryed to connect manualy to network no effect al forbidden networks present
and i put sim in other phone it works fine
how to make my sim work on my canvas 2 + which is gone through system storage increase
Click to expand...
Click to collapse
Try again and make sure u put ur both imei properly first imei is Hw and second is Sw so check that
Sent from my A110Q using XDA Premium 4 mobile app
[email protected] said:
Try again and make sure u put ur both imei properly first imei is Hw and second is Sw so check that
Sent from my A110Q using XDA Premium 4 mobile app
Click to expand...
Click to collapse
but can i know what is Hw and Sw plz
canvas 4 problem
i am facing d invalid Imei number problem, in my canvas A210. Engineering mode didn't worked. Please help me !
invalid imei solved from within the phone
1. Go to Engineering Mode with this code * # * # 3646633 # * # *
2. Type it on call pad
3. Engineering Mode show on your phone screen
4. Go to CDS info
5. Go to Radio info
6. then go to Phone1 (For the first IMEI No)
7. At the top there is a command line which begins "AT+" just type there "AT +EGMR=1,7,"IMEI_1" (Instead of IMEI_1 put your first IMEI No)
8. Hit send command
9. If you done just reboot the phone
10. If you change the second IMEI No then go to step 2 and select "Phone2"
11. And enter the code "AT +EGMR=1,10,"IMEI_2" (Instead of IMEI_2 put your second IMEI No)
12. Hit send command
13. Reboot your phone
Thank you..!
[email protected]
Thanks dude...it worked for my Xolo Q800.
Not working.....tried 10 times.Deeply followed all steps.
plz help i m pissed help me
[email protected] said:
PERMANENT SOLUTION OF IMEI IN CANVAS 2+
MANY PEOPLE ALWAYS SUFFER PROM THIS PROBLEM INVALID IMEI IN CUSTOM ROM OR STOCK ROM
SO,HERE I BROUGHT PERMANENT SOLUTION OF IMEI ON CANVAS 2+
**DOWNLOAD-LINKS**
1. IMEI_FILES;- http://d-h.st/L5N
2. IMEI_TOOL;- http://d-h.st/WDg
3. Cdc Driver :- http://d-h.st/riS
**REQUIREMENT**
1. PC
2. MINE UPLOADED FILES
3. LITTLE KNOWLEDGE AND MIND
**PROCEDURE**
1. EXTRACT IMEI_FILES AND IMEI TOOLS ON THE DESKTOP OF UR PC
2. NOW OPEN IMEI TOOL ( IMEI&SN Writer.exe)
3. NOW IN PLATFORM SELECT SMARTPHONE AND SELECT USB (SEE BELOW PLATFORM IN TOOL)
4. IN WRITE TOOL TICK IMEI 1 AND IMEI 2 AND WRITE THERE BOTH UR IMEI
5. NOW CLICK ON SELECT DB AND BROWSE TO THE FOLDER DATABASE AS DIRECTED IN STEP 2
6. SELECT THE FILE WHICH IS IN DATABASE FOLDER AND AGAIN IT ASK U TO SELECT AP FILE
7. THEN SELECT FILE WHICH IS IN AP FOLDER AND CLICK ON START
8. NOW SWITCH OFF UR CELL AND CONNECT
9. NOW GO TO DEVICE MANAGER ( BY RIGHT CLICK ON MY COMPUTER ICON AND CLICK ON PROPERTY ,AFTER OPENING WINDOW CLICK ON DEVICE MANAGER FROM SIDE BAR IN WIN 7 AND ABOVE...
10. AFTER OPENING OF DEVICE MANAGER ,GO TO CDC DRIVER WHICH WILL SHOW RED OR YELLOW CROSS SIGN ,NOW RIGHT CLICK ON AND CLICK ON UPDATE DRIVER .
11. NOW EXTRACT THE CDC DRIVER IN NEW FOLDER ANYWHERE AND BROWSER TO THE CDC DRIVER LOCATION AMD SELECT FOLDER AND CLICK OK TO UPDATE THE CDC DRIVER.. AFTER SUCCESSFULLY DONE
12. AGAIN CLICK ON START AND CONNECT UR PHONE ....NOW IT WILL WRITE IMEI PERMANENTLY
13. AFTER PROCESS FINISH REBOOT AND ENJOY.....[/SIZE][/FONT]
NOTES:-
1. THIS WILL NEVER GIVE U INVALID IMEI ERROR DURING FLASHING ANY ROM OR CHANGING ANY ROM.
2. WHEN U FORMAT UR CELL THROUGH SP FLASH TOOL THEN ONLY IT WILL SHOW INVALID IMEI..
3. THIS IS UNIVERSAL METHOD SO IT WILL WORK ON ALL MEDIATEK CHIPSET WHOSE GETTING INVALID IMEI.
4. FOR OTHER MEDIATEK CHIPSET USER U NEED UR STOCK DATABASE FILE (BASEBAND FILE AND AP FILE)
5. THIS WILL ONLY WORK WHEN U GET INVALID IMEI THEN DO THIS PROCESS AND U GET FREE FROM INVALID IMEI PROBLEM
CREDITS:-
1. [email protected]
2. IMEI TOOL MAKER (DON'T KNOW WHO MAKE THIS WONDERFUL IMEI TOOL)
3. PRATEEK SINGH (TESTER)
Click to expand...
Click to collapse
hey bro i did as said in description but i m kinda stuck on start wrting imei i installed the driver n than run as admin load files for 6589 remove battery then insert again then connect phone boots up then write imei startes n nothin moves forwrd even after 20min of waiting plz help i hav installed a custom rom n dont want to restore bk to my stock rom plz help bro plzzzz.....
---------- Post added at 06:03 PM ---------- Previous post was at 05:58 PM ----------
dhruv chandhok said:
1. Go to Engineering Mode with this code * # * # 3646633 # * # *
2. Type it on call pad
3. Engineering Mode show on your phone screen
4. Go to CDS info
5. Go to Radio info
6. then go to Phone1 (For the first IMEI No)
7. At the top there is a command line which begins "AT+" just type there "AT +EGMR=1,7,"IMEI_1" (Instead of IMEI_1 put your first IMEI No)
8. Hit send command
9. If you done just reboot the phone
10. If you change the second IMEI No then go to step 2 and select "Phone2"
11. And enter the code "AT +EGMR=1,10,"IMEI_2" (Instead of IMEI_2 put your second IMEI No)
12. Hit send command
13. Reboot your phone
Click to expand...
Click to collapse
plz help mate when i do it in engg mode it says at fails to send it worked with my stock rom but dont really want stock rom n now used imei writer i got all drivers n stuff with me install n working just problem is that imei writer is idling at the start of write imei i waited for like 30min n no progress still at wrtie imei plz help i m really pissed
stuck
Stuck on enter modemmeta and then failed
What to do?
i lost my canvas lite imei number can you plz do the same with canvas lite
dhruv chandhok said:
1. Go to Engineering Mode with this code * # * # 3646633 # * # *
2. Type it on call pad
3. Engineering Mode show on your phone screen
4. Go to CDS info
5. Go to Radio info
6. then go to Phone1 (For the first IMEI No)
7. At the top there is a command line which begins "AT+" just type there "AT +EGMR=1,7,"IMEI_1" (Instead of IMEI_1 put your first IMEI No)
8. Hit send command
9. If you done just reboot the phone
10. If you change the second IMEI No then go to step 2 and select "Phone2"
11. And enter the code "AT +EGMR=1,10,"IMEI_2" (Instead of IMEI_2 put your second IMEI No)
12. Hit send command
13. Reboot your phone
Click to expand...
Click to collapse
at command failed to send
????
good work manish bro...
[email protected] said:
PERMANENT SOLUTION OF IMEI IN CANVAS 2+
MANY PEOPLE ALWAYS SUFFER PROM THIS PROBLEM INVALID IMEI IN CUSTOM ROM OR STOCK ROM
SO,HERE I BROUGHT PERMANENT SOLUTION OF IMEI ON CANVAS 2+
**DOWNLOAD-LINKS**
1. IMEI_FILES;- http://d-h.st/L5N
2. IMEI_TOOL;- http://d-h.st/WDg
3. Cdc Driver :- http://d-h.st/riS
**REQUIREMENT**
1. PC
2. MINE UPLOADED FILES
3. LITTLE KNOWLEDGE AND MIND
**PROCEDURE**
1. EXTRACT IMEI_FILES AND IMEI TOOLS ON THE DESKTOP OF UR PC
2. NOW OPEN IMEI TOOL ( IMEI&SN Writer.exe)
3. NOW IN PLATFORM SELECT SMARTPHONE AND SELECT USB (SEE BELOW PLATFORM IN TOOL)
4. IN WRITE TOOL TICK IMEI 1 AND IMEI 2 AND WRITE THERE BOTH UR IMEI
5. NOW CLICK ON SELECT DB AND BROWSE TO THE FOLDER DATABASE AS DIRECTED IN STEP 2
6. SELECT THE FILE WHICH IS IN DATABASE FOLDER AND AGAIN IT ASK U TO SELECT AP FILE
7. THEN SELECT FILE WHICH IS IN AP FOLDER AND CLICK ON START
8. NOW SWITCH OFF UR CELL AND CONNECT
9. NOW GO TO DEVICE MANAGER ( BY RIGHT CLICK ON MY COMPUTER ICON AND CLICK ON PROPERTY ,AFTER OPENING WINDOW CLICK ON DEVICE MANAGER FROM SIDE BAR IN WIN 7 AND ABOVE...
10. AFTER OPENING OF DEVICE MANAGER ,GO TO CDC DRIVER WHICH WILL SHOW RED OR YELLOW CROSS SIGN ,NOW RIGHT CLICK ON AND CLICK ON UPDATE DRIVER .
11. NOW EXTRACT THE CDC DRIVER IN NEW FOLDER ANYWHERE AND BROWSER TO THE CDC DRIVER LOCATION AMD SELECT FOLDER AND CLICK OK TO UPDATE THE CDC DRIVER.. AFTER SUCCESSFULLY DONE
12. AGAIN CLICK ON START AND CONNECT UR PHONE ....NOW IT WILL WRITE IMEI PERMANENTLY
13. AFTER PROCESS FINISH REBOOT AND ENJOY.....[/SIZE][/FONT]
NOTES:-
1. THIS WILL NEVER GIVE U INVALID IMEI ERROR DURING FLASHING ANY ROM OR CHANGING ANY ROM.
2. WHEN U FORMAT UR CELL THROUGH SP FLASH TOOL THEN ONLY IT WILL SHOW INVALID IMEI..
3. THIS IS UNIVERSAL METHOD SO IT WILL WORK ON ALL MEDIATEK CHIPSET WHOSE GETTING INVALID IMEI.
4. FOR OTHER MEDIATEK CHIPSET USER U NEED UR STOCK DATABASE FILE (BASEBAND FILE AND AP FILE)
5. THIS WILL ONLY WORK WHEN U GET INVALID IMEI THEN DO THIS PROCESS AND U GET FREE FROM INVALID IMEI PROBLEM
CREDITS:-
1. [email protected]
2. IMEI TOOL MAKER (DON'T KNOW WHO MAKE THIS WONDERFUL IMEI TOOL)
3. PRATEEK SINGH (TESTER)
Click to expand...
Click to collapse
sir when i press the start button..and connect my mobile in switch off mode the the mobile is not start up and in the software it show enter meta mod fail...what to do sir please help me....
dhruv chandhok said:
1. Go to Engineering Mode with this code * # * # 3646633 # * # *
2. Type it on call pad
3. Engineering Mode show on your phone screen
4. Go to CDS info
5. Go to Radio info
6. then go to Phone1 (For the first IMEI No)
7. At the top there is a command line which begins "AT+" just type there "AT +EGMR=1,7,"IMEI_1" (Instead of IMEI_1 put your first IMEI No)
8. Hit send command
9. If you done just reboot the phone
10. If you change the second IMEI No then go to step 2 and select "Phone2"
11. And enter the code "AT +EGMR=1,10,"IMEI_2" (Instead of IMEI_2 put your second IMEI No)
12. Hit send command
13. Reboot your phone
Click to expand...
Click to collapse
Wow........Wow......Wow...... I was actually messed up with all the methods.... And this tutorial is just awesome.... Thanks a ton...... Amazing solution.... Worked like a charm....Many Many thanks..... Salute youuuuuuuu
Many thanks working for me..........
[email protected] said:
PERMANENT SOLUTION OF IMEI IN CANVAS 2+
MANY PEOPLE ALWAYS SUFFER PROM THIS PROBLEM INVALID IMEI IN CUSTOM ROM OR STOCK ROM
SO,HERE I BROUGHT PERMANENT SOLUTION OF IMEI ON CANVAS 2+
**DOWNLOAD-LINKS**
1. IMEI_FILES;- http://d-h.st/L5N
2. IMEI_TOOL;- http://d-h.st/WDg
3. Cdc Driver :- http://d-h.st/riS
**REQUIREMENT**
1. PC
2. MINE UPLOADED FILES
3. LITTLE KNOWLEDGE AND MIND
**PROCEDURE**
1. EXTRACT IMEI_FILES AND IMEI TOOLS ON THE DESKTOP OF UR PC
2. NOW OPEN IMEI TOOL ( IMEI&SN Writer.exe)
3. NOW IN PLATFORM SELECT SMARTPHONE AND SELECT USB (SEE BELOW PLATFORM IN TOOL)
4. IN WRITE TOOL TICK IMEI 1 AND IMEI 2 AND WRITE THERE BOTH UR IMEI
5. NOW CLICK ON SELECT DB AND BROWSE TO THE FOLDER DATABASE AS DIRECTED IN STEP 2
6. SELECT THE FILE WHICH IS IN DATABASE FOLDER AND AGAIN IT ASK U TO SELECT AP FILE
7. THEN SELECT FILE WHICH IS IN AP FOLDER AND CLICK ON START
8. NOW SWITCH OFF UR CELL AND CONNECT
9. NOW GO TO DEVICE MANAGER ( BY RIGHT CLICK ON MY COMPUTER ICON AND CLICK ON PROPERTY ,AFTER OPENING WINDOW CLICK ON DEVICE MANAGER FROM SIDE BAR IN WIN 7 AND ABOVE...
10. AFTER OPENING OF DEVICE MANAGER ,GO TO CDC DRIVER WHICH WILL SHOW RED OR YELLOW CROSS SIGN ,NOW RIGHT CLICK ON AND CLICK ON UPDATE DRIVER .
11. NOW EXTRACT THE CDC DRIVER IN NEW FOLDER ANYWHERE AND BROWSER TO THE CDC DRIVER LOCATION AMD SELECT FOLDER AND CLICK OK TO UPDATE THE CDC DRIVER.. AFTER SUCCESSFULLY DONE
12. AGAIN CLICK ON START AND CONNECT UR PHONE ....NOW IT WILL WRITE IMEI PERMANENTLY
13. AFTER PROCESS FINISH REBOOT AND ENJOY.....[/SIZE][/FONT]
NOTES:-
1. THIS WILL NEVER GIVE U INVALID IMEI ERROR DURING FLASHING ANY ROM OR CHANGING ANY ROM.
2. WHEN U FORMAT UR CELL THROUGH SP FLASH TOOL THEN ONLY IT WILL SHOW INVALID IMEI..
3. THIS IS UNIVERSAL METHOD SO IT WILL WORK ON ALL MEDIATEK CHIPSET WHOSE GETTING INVALID IMEI.
4. FOR OTHER MEDIATEK CHIPSET USER U NEED UR STOCK DATABASE FILE (BASEBAND FILE AND AP FILE)
5. THIS WILL ONLY WORK WHEN U GET INVALID IMEI THEN DO THIS PROCESS AND U GET FREE FROM INVALID IMEI PROBLEM
CREDITS:-
1. [email protected]
2. IMEI TOOL MAKER (DON'T KNOW WHO MAKE THIS WONDERFUL IMEI TOOL)
3. PRATEEK SINGH (TESTER)
Click to expand...
Click to collapse
Step 8 says ". NOW SWITCH OFF UR CELL AND CONNECT "
Step 12 says "AGAIN CLICK ON START AND CONNECT UR PHONE ....NOW IT WILL WRITE IMEI PERMANENTLY"
A little confused here..................
Between 8 and 12 when should we removed the phone's connection ?
PERMANENT IMEI SOLUTION
HELLO GUYS,I COME UP WITH THE WORKING SOLUTION OF IMEI FOR THOSE PEOPLE WHO LOST THEIR IMEI DURING SYSTEM PARTITION INCREASE OR DUE TO ANY SUCH CAUSE.TRY THIS ONLY WHEN YOU ARE IN LOST IMEI STATE.
TIPS-
AS IT CAN ONLY USED WHEN YOU ARE IN LOST IMEI STATE,BUT IF YOU RESTORED YOUR IMEI BY NON-PERMANET METHOD ROOT EXPLORER COPY PASTE AND WANTS DO DO THIS THEN TAKE CWM BACKUP AND FLASH A NEW ROM AND THEN FOLLOW THESE STEPS THEN AFTER SUCESSFUL IMEI RESTORED,RESTORE YOUR CWM BACKUP BUT I AM NOT SURE ABOUT THIS SO DO IT ON YOUR RISK OR TRY AFTER ANY NEW ROM INSTALL.
-------DOWNLOAD-LINKS--------
[CDC_DRIVERS_BY_DIGYVIJAY(see below attachment)
USB_Drivers_MMX_A110Q(see below attachment)
IMEI FILES
IMEI TOOL
NOTE-INSTALL BOTH DRIVERS
STEPS OF INSTALLNG DRIVERS:-
DRIVER1(CDC_DRIVERS_BY_DIGYVIJAY)-
EXTRACT CDC_DRIVERS_BY_DIGYVIJAY INTO A FOLDER
SWITCH OFF PHONE AND REMOVE BATTERY AND INSERT BATTERY AND DO NOT POWER ON.
NOW OPEN DEVICE MANAGER IN PC,THEN CONNECT YOUR PHONE,IT WILL SHOW A "CDS" AS UNKNOWN DEVICE.
BE QUICK HERE AND RIGHT CLICK AND CHOOSE UPDATE DRIVER.
CHOOSE BROWSE MANUALLLY OPTION IN THE WINDOW OPENED.
BROWSE MY DRIVER 1 EXTRACTED FOLDER AND SELECT IT AND CHOOSE INSTALL IT.
WAIT FOR SOME MINUTES,AFTER THAT IT WILL SHOW DRIVER INSTALLED SUCESSFULLY
IF ANYBODY CANNOT FIND NEW "CDS" AS UNKNOWN DEVICE IN DEVICE MANAGER THEN BEFORE DOING
THESE ALL STEPS,START IMEI TOOL AND PUT IMEI & BROWSE IMEI FILES(SEE STEPS BELOW) THEN CHOOSE START AND PLUG IN YOUR DEVICE IN OFF STATE(BATTERY REMOVED AND INSERTED).BUT IT WILL NOT START.NOW OPEN DEVICE MANAGER.YOU WILL FIND WHAT ARE YOU LOOKING FOR.
DRIVER 2(USB_Drivers_MMX_A110Q)
(IT IS MMX USB PRELOADER DRIVER,WHICH MAY YOU INSTALLED EARLIER,IF NOT THEN FOLLOW PROCESS-
EXTRACT USB_Drivers_MMX_A110Q IN A FOLDER
TURNOFF YOUR PHONE,OPEN DEVICE MANAGER
PLUG DEVICE THEN A NEW DEVICE WILL APPEAR IN DEVICE MANAGER LIKE-MT65XX PRELOADER
BE QUICK HERE AND RIGHT CLICK ON IT AND CHOOSE UPDATE DRIVE.
CHOOSE BROWSE MANUALLY IN NEW WINDOW OPENED
BROWSE TO THE EXTRACTED FOLDER AND INSTALL IT.
NOW AFTER BOTH DRIVERS INSTALLED,LETS GO TO MAIN THING-
STEPS:-
EXTRACT IMEI_FILES AND IMEI TOOLS.
NOW OPEN IMEI TOOL ( IMEI&SN Writer.exe) WITH RUN AS ADMINISTRATOR.
NOW IN PLATFORM SELECT SMARTPHONE AND SELECT USB
IN IMEI TOOL TICK IMEI 1 AND IMEI 2 AND WRITE YOUR BOTH UR IMEI(FIND IMEI ON BILL,BOX,OR UNDER BATTERY)
NOW CLICK ON SELECT DB AND BROWSE TO THE FOLDER(IMEI FILE EXTRACTED)---DATABASE.
SELECT THE FILE WHICH IS IN DATABASE FOLDER AND AGAIN IT ASK U TO SELECT AP FILE
THEN SELECT FILE WHICH IS IN AP FOLDER AND CLICK ON START .
NOW SWITCH OFF UR CELL AND REMOVE BATTERY AND INSERT IT AGAIN THEN CONNECT.
AFTER PROCESS FINISH REMOVE DEVICE AND REBOOT.
SOME NOTES:-
1)THIS WILL WORK ON ALL MEDIATEK DEVICES,BUT FOR OTHER DEVICE PLEASE CHANGE THEIR DATABASE FILES,THEY CAN FIND THEIR DATABASE FILES UNDER THEIR STOCK ROM FLASHABLE VIA SP FLASH TOOL.
2)AFTER THIS PROCESS YOU WILL NEVER LOOSE YOUR IMEI AFTER ANY CUSTOM ROM INSTALLATION VIA CWM.
3)YOU WILL ONLY LOOSE YOUR IMEI WHEN YOU USE SP FLASH TOOL METHOD TO FLASH ROM OR INCRESE PARTITION METHOD AGAIN.
100% WORKING & TESTED.
PRESS THANKS
CREDITS-
IMEI TOOL CREATOR
DIGYVIJAY KUMAR
Helper & Supportive Dev @tech mashido[
DO AT YOUR OWN RISK,I WILL NOT BE RESPONSIBLE FOR ANYTHING HAPPENS TO YOU DEVICE.
error
error enter meta mode fail
bhartendra said:
error enter meta mode fail
Click to expand...
Click to collapse
check CDC drivers installed or not.....or reinstall CDC drivers
Meta Mode Fail
digyvijaykumar123 said:
check CDC drivers installed or not.....or reinstall CDC drivers
Click to expand...
Click to collapse
all drivers are installed successfully but still MetaMode fail error..
it work on canvas2 yes or no plz reply
---------- Post added at 05:00 AM ---------- Previous post was at 04:55 AM ----------
srs1434 said:
all drivers are installed successfully but still MetaMode fail error..
Click to expand...
Click to collapse
i m agree with u
Is it worked for any one...If yes I would like to try it once coz every time I install new ROM my imei will be lost, since I have backup of IMEI every time I need to restore this backup file from Mobile uncle tool. Which is annoying process after every new ROM installation.
same error here and the driver are installed!
digyvijaykumar123 said:
PERMANENT IMEI SOLUTION
HELLO GUYS,I COME UP WITH THE WORKING SOLUTION OF IMEI FOR THOSE PEOPLE WHO LOST THEIR IMEI DURING SYSTEM PARTITION INCREASE OR DUE TO ANY SUCH CAUSE.TRY THIS ONLY WHEN YOU ARE IN LOST IMEI STATE.
TIPS-
AS IT CAN ONLY USED WHEN YOU ARE IN LOST IMEI STATE,BUT IF YOU RESTORED YOUR IMEI BY NON-PERMANET METHOD ROOT EXPLORER COPY PASTE AND WANTS DO DO THIS THEN TAKE CWM BACKUP AND FLASH A NEW ROM AND THEN FOLLOW THESE STEPS THEN AFTER SUCESSFUL IMEI RESTORED,RESTORE YOUR CWM BACKUP BUT I AM NOT SURE ABOUT THIS SO DO IT ON YOUR RISK OR TRY AFTER ANY NEW ROM INSTALL.
-------DOWNLOAD-LINKS--------
[CDC_DRIVERS_BY_DIGYVIJAY(see below attachment)
USB_Drivers_MMX_A110Q(see below attachment)
IMEI FILES
IMEI TOOL
NOTE-INSTALL BOTH DRIVERS
STEPS OF INSTALLNG DRIVERS:-
DRIVER1(CDC_DRIVERS_BY_DIGYVIJAY)-
EXTRACT CDC_DRIVERS_BY_DIGYVIJAY INTO A FOLDER
SWITCH OFF PHONE AND REMOVE BATTERY AND INSERT BATTERY AND DO NOT POWER ON.
NOW OPEN DEVICE MANAGER IN PC,THEN CONNECT YOUR PHONE,IT WILL SHOW A "CDS" AS UNKNOWN DEVICE.
BE QUICK HERE AND RIGHT CLICK AND CHOOSE UPDATE DRIVER.
CHOOSE BROWSE MANUALLLY OPTION IN THE WINDOW OPENED.
BROWSE MY DRIVER 1 EXTRACTED FOLDER AND SELECT IT AND CHOOSE INSTALL IT.
WAIT FOR SOME MINUTES,AFTER THAT IT WILL SHOW DRIVER INSTALLED SUCESSFULLY
IF ANYBODY CANNOT FIND NEW "CDS" AS UNKNOWN DEVICE IN DEVICE MANAGER THEN BEFORE DOING
THESE ALL STEPS,START IMEI TOOL AND PUT IMEI & BROWSE IMEI FILES(SEE STEPS BELOW) THEN CHOOSE START AND PLUG IN YOUR DEVICE IN OFF STATE(BATTERY REMOVED AND INSERTED).BUT IT WILL NOT START.NOW OPEN DEVICE MANAGER.YOU WILL FIND WHAT ARE YOU LOOKING FOR.
DRIVER 2(USB_Drivers_MMX_A110Q)
(IT IS MMX USB PRELOADER DRIVER,WHICH MAY YOU INSTALLED EARLIER,IF NOT THEN FOLLOW PROCESS-
EXTRACT USB_Drivers_MMX_A110Q IN A FOLDER
TURNOFF YOUR PHONE,OPEN DEVICE MANAGER
PLUG DEVICE THEN A NEW DEVICE WILL APPEAR IN DEVICE MANAGER LIKE-MT65XX PRELOADER
BE QUICK HERE AND RIGHT CLICK ON IT AND CHOOSE UPDATE DRIVE.
CHOOSE BROWSE MANUALLY IN NEW WINDOW OPENED
BROWSE TO THE EXTRACTED FOLDER AND INSTALL IT.
NOW AFTER BOTH DRIVERS INSTALLED,LETS GO TO MAIN THING-
STEPS:-
EXTRACT IMEI_FILES AND IMEI TOOLS.
NOW OPEN IMEI TOOL ( IMEI&SN Writer.exe) WITH RUN AS ADMINISTRATOR.
NOW IN PLATFORM SELECT SMARTPHONE AND SELECT USB
IN IMEI TOOL TICK IMEI 1 AND IMEI 2 AND WRITE YOUR BOTH UR IMEI(FIND IMEI ON BILL,BOX,OR UNDER BATTERY)
NOW CLICK ON SELECT DB AND BROWSE TO THE FOLDER(IMEI FILE EXTRACTED)---DATABASE.
SELECT THE FILE WHICH IS IN DATABASE FOLDER AND AGAIN IT ASK U TO SELECT AP FILE
THEN SELECT FILE WHICH IS IN AP FOLDER AND CLICK ON START .
NOW SWITCH OFF UR CELL AND REMOVE BATTERY AND INSERT IT AGAIN THEN CONNECT.
AFTER PROCESS FINISH REMOVE DEVICE AND REBOOT.
SOME NOTES:-
1)THIS WILL WORK ON ALL MEDIATEK DEVICES,BUT FOR OTHER DEVICE PLEASE CHANGE THEIR DATABASE FILES,THEY CAN FIND THEIR DATABASE FILES UNDER THEIR STOCK ROM FLASHABLE VIA SP FLASH TOOL.
2)AFTER THIS PROCESS YOU WILL NEVER LOOSE YOUR IMEI AFTER ANY CUSTOM ROM INSTALLATION VIA CWM.
3)YOU WILL ONLY LOOSE YOUR IMEI WHEN YOU USE SP FLASH TOOL METHOD TO FLASH ROM OR INCRESE PARTITION METHOD AGAIN.
100% WORKING & TESTED.
PRESS THANKS
CREDITS-
IMEI TOOL CREATOR
DIGYVIJAY KUMAR
Helper & Supportive Dev @tech mashido[
DO AT YOUR OWN RISK,I WILL NOT BE RESPONSIBLE FOR ANYTHING HAPPENS TO YOU DEVICE.
Click to expand...
Click to collapse
It's full of BULL**** ADS & POP-UPS the download links.......... Don't post if you want to waste users time instead of helping them.... Utter nonsense
REQUIREMENTS
Rooted Device
Custom Recovery
(CTR, CWM Recommended)
Click to expand...
Click to collapse
One week after i brought my phone, I accidently formatted my device using sp flash tools and lost the IMEI/NVRAM. It has been a real pain for me to repair it because i was new to an mtk device. Finally figured out how to repair by doing many search. So I made this thread to share the working methods to help those people who are suffering from invalid IMEI
So let's start.
Always remember "Prevention is better than cure". If you are planning to flash a custom rom, First of all Backup your IMEI. Don't Trust that a custom ROM flash will not delete your IMEI number. because odds are it will. It's important to store your backup to external SD because some ROM flashing techniques will erase your internal SD. so the best way to keep your IMEI number is to take my advise and make a backup.
Some Video tutorials will be added soon
DISCLAIMER: Do not do try any of these methods unless your IMEI has been lost! Doing so may permanently corrupt your imei partition.
IMEI Backup & Restore Methods:
1. Mobile Uncle Tools:
1. Open the App,
2. Select IMEI BACKUP RESTORE (MTK)
3. Choose BACK UP TO SDCARD (MTK)
4. Reboot
>> (to restore, choose restore from sd card)
2. MTK Droid Tools [PC Required]:
1. Switch on the phone and connect it to pc.
2. Go to settings->about phone.
3. Tap build number for 7 times.
4. Go back and enter developers options, and check usb debugging on.
5. Start MTK Driod Tools and click root. grant root permission in phone.
6. Click IMEI/NVRAM and click backup or restore as required.
>> (to restore, choose the backup file from nvram backup folder)
Temporary IMEI Restore (without Backup):
(These are Temporary Methods, so you need to do this every time you upgrade Firmware, install a new rom, or doing a factory reset.)
1. Chamelephon
1. Install Chamelephon.apk
2. Open App
3. Type both IMEI Numbers
4. Click "Apply new IMEIs"
5. Reboot
Video Tutorial
2. MTK Droid Tools [PC, ADB Drivers Required]
1. Enable USB debugging
2. Open MTK Droid tools in PC
3. Allow USB debugging in phone if asked
4. Click ROOT button in MTK droid tools
5. Click Yes and Grant/Authorize root permission in phone
6. Click IMEI/NVRAM option in MTK droid tools
7. Type both IMEI numbers
8. Select "Replace IMEI"
9. Click OK
10. Reboot!
Video Tutorial
2. NVRAM Wifi Error
1. Download "NVRAM Wifi Fix.zip"
2. Enter Recovery
3. Install the zip
4. Reboot
Permanent IMEI Restore(without Backup):
1. Maui META 3G Tool
1. Install "Maui META 3G Tool" on your PC
2. Open it.
3. Click "Options ↦ Connect Smart phone into META mode"
4. Click on Reconnect button
5. Switch off your phone
6. Connect via USB Cable
7. Change "Get Version" to "IMEI Download"
8. Click "Change NVRAM Database file"
9. Download & extract "NV Ram Database Files.rar"
10. Select "BPLGUInfoCustomAppSrcP_MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V5_1_wg_n"
11. Type both IMEI numbers
12. Click "Download to flash"
13. Click "Upload from flash"
14. Close the IMEI Download Tab
15. Disconnect
16. Switch on the phone.
2. IMEI&SN Writer
Didn't tried this method. Hope this too will work!
1. Flashing NVRAM.bin (Recommended for Lolipop Roms )
1. Install SP flash tool
2. Load Scatter file
4. Now press download
5. Connect your phone without battery
6. Insert battery & turn on your device when you see the green tick.
new blog under construction:
for broken links, and other video guides, click here
DOWNLOADS
MOD EDIT - ALL THE LINKS ARE REMOVED SINCE XDA RULES DO NOT PERMIT PAY PER CLICK.
I really worked hard to make this thread. Hit THANKS button if you found this useful
You can add your experience in fixing imei below on this thread. It may help many others! Always remember, Sharing is caring! Thank You.
Reserved
Reserved
USB VCOM Driver installing guide: http://forum.xda-developers.com/showthread.php?t=2206421
NVRAM Error and Serial Number fix with SN WRITE STATION TOOL on unite 2
Hey Guys as u know imei fix with muai meta software guide is already given on first post of unite 2 thread .... So i don't need to guide here to all of you keep in mind before fix imei with muai meta please reset your phone otherwise it sometimes don't detect..
Here in this Guide i will describe how to fix NVRAM error and write serial number with sn Write Station tool
I have also unite 2 8gb model and i have tried it successfully on my lollipop unite 2 device if you are on kitkat may it will work but this guide is only for lollipop users :
steps:
Before starting please see if you have already installed mediatek usb vcom drivers which is needed for flash rom using sp flash tool.
1. First of all download sn write station tool v1.5.3--20121018. i test it with this version.
2. Now extract your stock rom.
3. Now run sn write station tool and select smartphone from platform drop-down option.
4.Select usb instead uart mode.
5. Now tick on sn and wifi only under write item section.
6. Now write your serial number of your device in sn textbox.
7. In wifi textbox write your wifi mac address without colon. after correct wifi address written a green tick will appear.
( To know your correct wifi address go to setting>wifi> option advance>MAC address>
here you will see your correct address write down on sn tool without colon. )
8. Now select db file from extracted rom. name of file is APDB_MT6582_S01_L0.MP2_W15.09
9. Now click on start.
10. Now tick usb debugging in device and switch off your device and connect to computer with battery.
11. in sn write tool it will show successful :good:
12. Sometimes sn write tool switch on your mobile in meta mode but don't write sn and wifi address. Just unplug your device and reconnect it with same condition in which you plup out your device..
if it is in on (boot logo) situation then connect it as it is. otherwise connect it again in switch off mode again.
13. Sn write tool do its work. after successful unplug your device and restart your phone.
This method is successfully tested by me. may be it will helpful to you.
cdc drivers....
hii dude
the tutorial above was good enough bt the thing is tat can u provide link for that cdc drivers which was needed in thah maui thing plzzz
No Sim card detect in my UNITE 2
Hi, Please help me, I updated to lolipop and after that my phone cannot detect sim card. Later I rooted, installed another roms, but still the same issue. Please reply urgently.
dark_x said:
hii dude
the tutorial above was good enough bt the thing is tat can u provide link for that cdc drivers which was needed in thah maui thing plzzz
Click to expand...
Click to collapse
I didnt have it right now. Don't know that where did i find those drivers. Search it in google. I will try to figure it out as i got some free time.
viru_192 said:
Hi, Please help me, I updated to lolipop and after that my phone cannot detect sim card. Later I rooted, installed another roms, but still the same issue. Please reply urgently.
Click to expand...
Click to collapse
What about your imei number???
I tried to google it bt didn't found any appropriate link
Bt try to put up a link for those drivers...
Thanks...
Regards dark_x
rahulsingla said:
Hey Guys as u know imei fix with muai meta software guide is already given on first post of unite 2 thread .... So i don't need to guide here to all of you keep in mind before fix imei with muai meta please reset your phone otherwise it sometimes don't detect..
Here in this Guide i will describe how to fix NVRAM error and write serial number with sn Write Station tool
I have also unite 2 8gb model and i have tried it successfully on my lollipop unite 2 device if you are on kitkat may it will work but this guide is only for lollipop users :
steps:
Before starting please see if you have already installed mediatek usb vcom drivers which is needed for flash rom using sp flash tool.
1. First of all download sn write station tool v1.5.3--20121018. i test it with this version.
2. Now extract your stock rom.
3. Now run sn write station tool and select smartphone from platform drop-down option.
4.Select usb instead uart mode.
5. Now tick on sn and wifi only under write item section.
6. Now write your serial number of your device in sn textbox.
7. In wifi textbox write your wifi mac address without colon. after correct wifi address written a green tick will appear.
( To know your correct wifi address go to setting>wifi> option advance>MAC address>
here you will see your correct address write down on sn tool without colon. )
8. Now select db file from extracted rom. name of file is APDB_MT6582_S01_L0.MP2_W15.09
9. Now click on start.
10. Now tick usb debugging in device and switch off your device and connect to computer with battery.
11. in sn write tool it will show successful :good:
12. Sometimes sn write tool switch on your mobile in meta mode but don't write sn and wifi address. Just unplug your device and reconnect it with same condition in which you plup out your device..
if it is in on (boot logo) situation then connect it as it is. otherwise connect it again in switch off mode again.
13. Sn write tool do its work. after successful unplug your device and restart your phone.
This method is successfully tested by me. may be it will helpful to you.
Click to expand...
Click to collapse
I tried this method but every time I tried, I was getting "Entre Meta Mode Failed" I am unable to understand why my device is not going into meta mode. I have written IMEIs and MAC IDs with this tool on Canvas HD, hell lot of time.
The process for Canvas HD is little different, I used to select both the database files, first "BPLGUInfoCustomAppSrcP_MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V6_P18" and then this one "APDB_MT6589_S01_MAIN2.1_W10.24" secondly I used to power on my device "Power On" msg was displayed on SN Write Tool.
I tried all possible scenario, selected only one database file, changed the sequence of selecting database files, tried to turn it off after hitting start but worked nothing for me.
When we select Database files the window opens twice, did you select same file both the times? And have you tried to write all the things together, means IMEIs, MAC ID of BT and MAC ID of Wifi in just one go?
answer
nice_guy75 said:
I tried this method but every time I tried, I was getting "Entre Meta Mode Failed" I am unable to understand why my device is not going into meta mode. I have written IMEIs and MAC IDs with this tool on Canvas HD, hell lot of time.
The process for Canvas HD is little different, I used to select both the database files, first "BPLGUInfoCustomAppSrcP_MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V6_P18" and then this one "APDB_MT6589_S01_MAIN2.1_W10.24" secondly I used to power on my device "Power On" msg was displayed on SN Write Tool.
I tried all possible scenario, selected only one database file, changed the sequence of selecting database files, tried to turn it off after hitting start but worked nothing for me.
When we select Database files the window opens twice, did you select same file both the times? And have you tried to write all the things together, means IMEIs, MAC ID of BT and MAC ID of Wifi in just one go?
Click to expand...
Click to collapse
Yes i select same file for twice name of file is given above in my post and i never try to write other things like bt address, imei same time but i want to say don't try to write bt address because it will show error every time when you try to write and i also want to say that imei number can be written with this tool but select only imei don't other things like sn number, wifi mac address.......etc. try one thing only at same time. means when you want to write imei then select only imei but you can choose sn and wifi mac address at same time it can be flashed successfully......
---------- Post added at 04:48 AM ---------- Previous post was at 04:41 AM ----------
dark_x said:
I tried to google it bt didn't found any appropriate link
Bt try to put up a link for those drivers...
Thanks...
Regards dark_x
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2206421
find drivers in this link ..... thanks to kumar abhishek for his guide for driver and installation procedure.......
nice_guy75 said:
I tried this method but every time I tried, I was getting "Entre Meta Mode Failed" I am unable to understand why my device is not going into meta mode. I have written IMEIs and MAC IDs with this tool on Canvas HD, hell lot of time.
The process for Canvas HD is little different, I used to select both the database files, first "BPLGUInfoCustomAppSrcP_MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V6_P18" and then this one "APDB_MT6589_S01_MAIN2.1_W10.24" secondly I used to power on my device "Power On" msg was displayed on SN Write Tool.
I tried all possible scenario, selected only one database file, changed the sequence of selecting database files, tried to turn it off after hitting start but worked nothing for me.
When we select Database files the window opens twice, did you select same file both the times? And have you tried to write all the things together, means IMEIs, MAC ID of BT and MAC ID of Wifi in just one go?
Click to expand...
Click to collapse
Hey i have the same problem. Did you find any solution?
girrafe said:
Hey i have the same problem. Did you find any solution?
Click to expand...
Click to collapse
I got this issue while running on lolipop firmware, trying to write imei with my PC running Windows XP, but for kitkat, it works.. These applications didn't worked for me in Windows 8.1 and 10
Hi, I updated my unite 2 to lolipop and after that my phone cannot detect sim card. Later I formatted my rom, and installed kitkat rom, but now it showing that invalid imei .and also battery is draining too fastly .please help me sir. reply urgently.
johnygeorge said:
Hi, I updated my unite 2 to lolipop and after that my phone cannot detect sim card. Later I formatted my rom, and installed kitkat rom, but now it showing that invalid imei .and also battery is draining too fastly .please help me sir. reply urgently.
Click to expand...
Click to collapse
try the permanent imei repair method mentioned in the first post.
ajiththiruvatta said:
try the permanent imei repair method mentioned in the first post.
Click to expand...
Click to collapse
Bro thanks for helping me. I hv one last question i hv nv ram.bin file of my stock rom ok but when i load scatter file in sp flash tool there is no option to flash nvram.bin if u try figure it out i will appreciate.
Hello everyone ,
This is my firt's tutorial !
Today i'm going to teach you how to root your phone ( in my case it's a Ulefone Germini Pro ) and restore IMEI's.
/!\ATTENTION/!\ i don't take any responsability for anything that happen to your phone ! So do it at you own risk ! /!\
Before starting , my phone as a MTK chipset , so i don't advise you to try this if your chipset isn't a MTK ! And you need a OTG cable with a mouse !
Lets go :
TO ROOT [WORKS FOR ULEFONE GERMINI PRO] :
Important be sure to download PDANET it will solve alot of problems with the drivers !!
0-Enable USB DEBUGGING
1- Download the stock rom of your phone and check if is the same version as your phone ! ( exemple : my phone is an android 7.1.1 so i need to download the stock room version 7.1.1)
2- Download the drivers : http://www.devfiles.co/download/0InO9P5m/MT65xx_USB_VCOM_DRIVERS.zip and install them !
3-Download twrp (recovery.img) : https://mega.nz/#!8f43VYLa!o-elPp74o35tm3AdtcW1wVbFnBHIGi_dUP7skWWGmOM
4-Download Modified Boot (boot.img) : https://mega.nz/#!sHQxySJL!MRqtD6-VoZMLyEpr-ym7LlktiMR0GXYKUuLZlpbxhE0
5-Download latest version of SPFlash Tool : http://spflashtools.com/category/windows
6-Now you need to download SuperSu , but this one as to be downloaded with your phone directly on you need to put it on a sdcard , as you want !
here's the link : https://download.chainfire.eu/supersu-stable
7- Run Flashtool.exe
8- Choose scatter file ( it's on your downloaded Stock Rom )
9- Untick everything
10- Tick recovery
11 - Click on location to choose the custom recevery.img ( you downloaded before )
12 - double check only recovery is tick
13- Turn off you phone and plug it one time and check if the pc detect's it
14 - Unplug it
15 - So now the phone stills off , on sp flash tool click download
16- Plug your phone and wait few seconds
17 - the flashing should start
18 - if all go well you could see a green arrow on the program
19 - now untick recovery
20 - tick boot
21- click on location and find your custom boot.img
22 - and flash it the same way as recovery.img
23 - Now as a said before if you have downloaded SuperSu direclty in your phone , just turn it on by pressing power + volume UP
24 - You should see a little menu , use volume up to choose recovery and volume down to confirm it
25-TWRP should appear
26 - Put the otg cable on your phone and plug a mouse on it
27 - you should get a message asking to modify system , with the mouse slide to authorize
28 - after that click on install
29 - choose the superSU.zip where you download it
30 - slide to flash it
31 - Reboot and you should get rooted
32 - Enjoy
TO RESTORE YOUR IMEI'S :
You need :
-PC
-The Program
-The Stock room you downloaded before
- The drivers
- The box of your imei's
Let's go :
0- Download the program
http://www12.zippyshare.com/v/UafLqKD2/file.html
Important be sure to download PDANET it will solve alot of problems with the drivers !!
1- Start the program
2- Go to help about sn and check that you have a new version mine is : 1.1604.00
3- Comport : select USB VCOM
4- Target Type : Select SmartPhone
5- click on system config
6- tick imei and dual imei ( if you have 2 imei's else tick only imei )
7- click on MD1_DB and choose a file in your stock rom that the name start like this :
MDDB_InfoCustomAppSrcP_MT6797_S00_MOLY_LR11_W1603_MD_MP_V62_4_P3_1_ulwctg_n.EDB
Be sure to check that and the end of the file is a .EDB
8- click on AP_DB and choose a file in you stock room that the name is start like this :
APDB_MT6797_S01_alps-mp-n1.mp9_W17.18
Be careful you stock room can contain to files choose the one that end with a number and not with a ENUM
9 - click on save
10 - power off you phone and disconnect it from the pc
11- press start
12 - put you imei's
13 - press ok
14 - connect your phone
15- if it's all okay you should see a message with passed on it ! IF it fails try again one time because my firts time failed too
16 - After getting the message passed , disconnect your phone and turn it on !
17 - You should get your imei's back !
18 - ENJOY !!
Credits :
Annubiis : For helping with my phone.
RAMANDEEP SINGH from androidweblog.
dodos from bbs.elephone .
If it helped you click on say thank's and if you need help comment this post !
Thanks alot bro it worked for my lenovo k8 plus dual sim phone...... and also PdaNet is must i understood.....
Redmi note 7 pro working ?
Mine is Samsung m10s, exynos, latest version Android 11. Do u think it will woerk on my phone, actually my phone says imei NG status and I'm unable to make calls, mobile data or sms. Please help me