EDITED: I no longer need the OTG Commands... and they don't exist either.
I now have OTG adapters that work fully.
Related
is there any means to rebuild a tabler's Kernel with newer/better USB Host drivers? since trying to get any Controller to work on my DCPAD2121 is a nightmare,the USB Host Controller app is abl eto detect the devices, so android Does see it. it's just.. Oblivious they are controllers.
i have a usb to Ethernet adapter 10/100 which cabe with its CD. I hooked it up with my device but no luck. :crying:
could not see eth0 in terminal using netcfg .
after reading some posts about usb to Ethernet on xda , I rooted the phone, ran the makefile provided in the CD. still no luck.
So finally after reading for 2 days, I have options to
Install Ethernet drivers (don't know how)
Install kernel with Ethernet drivers (will change my phone config completely, maybe need to recalibrate later)
Flash a new ROM with Ethernet drivers (will need to reinstall everything)
Don't know the best option. Kinda stuck.
I don't want to loose the current config of cpu speed, etc. provided in the current Android
FYI: The device is detected on the device using usb host controller. Usb to Ethernet Model "Terabyte USB To Lan Card Ethernet Adapter Speed 10/100" found on Amazon. Manufacturer CH9100 Make CH9200. drivers provided has a "ch9x00.c" dunno what to do with it. (I mean after cross compiling).
attached the .c file for refrence.
Does Mate 9 USB C port support USB host OTG? Can i connect a USB flash drive to it?
Yes, it does. You can.
You also get a USB Typ C to MicroUSB Adapter from Huawei when you but the Mate 9.
Anyone knows any method to set USB host mode (OTG mode) when not having a ID/Sense pin on the cable?
Be it with some sort of "echo 1 > /sys/something" command
Or a ADB command
Or a ready made app?
Or anything?
I did find this app, which seems to do this, but it is just stuck on my tablet.
https://play.google.com/store/apps/details?id=org.psypeople.OTG_patch&hl=en
The reason for this request is that I cannot find any of those "magnet cables" that connect all 5 pins. Always only 4.
And I want my car-tablet to be connected with a magnet cable.
Many thanks
have same problem, is there any way activate USB HOST mode on android 7.1.1 if no SENSE/ID PIN but hardware/kernel support USB OTG?
cybermaus said:
Anyone knows any method to set USB host mode (OTG mode) when not having a ID/Sense pin on the cable?
Be it with some sort of "echo 1 > /sys/something" command
Or a ADB command
Or a ready made app?
Or anything?
I did find this app, which seems to do this, but it is just stuck on my tablet.
https://play.google.com/store/apps/details?id=org.psypeople.OTG_patch&hl=en
The reason for this request is that I cannot find any of those "magnet cables" that connect all 5 pins. Always only 4.
And I want my car-tablet to be connected with a magnet cable.
Many thanks
Click to expand...
Click to collapse
Bumerangas said:
have same problem, is there any way activate USB HOST mode on android 7.1.1 if no SENSE/ID PIN but hardware/kernel support USB OTG?
Click to expand...
Click to collapse
If the device does not have the hardware to support OTG, it won't work no matter what you try.
If it has the hardware but does not have the software, it will require building a new kernel with OTG support implemented in the kernel, or if the device is rooted, you can try something like the Stickmount app to force enable OTG support(the app still requires the device to have the hardware to support OTG, otherwise, it won't work).
Sent from my SM-S767VL using Tapatalk
I am trying to install custom firmware on b760h stb. I have already installed mtk preloader drivers. But when I connect STB with laptop through USB A male to USB A male, it doesn't work. is there any way to connect it to the laptop.
first, Cek... USB Cable, does it work?
Second, Check if the usb driver is correct ?
Conect usb male to male in to usb 1 in the stb without power adaptor.
I am facing the same problem. I have checked the USB Male to Male cable. It works. I also installed the USB drivers for Window10. I connected the USB cable in USB1 Port of STB without power adapter. But still it doesnt work.
Any Help ???