can it be done ?
i set the phone to USB development on, however when windows asks for driver, it wont accept that driver that comes with the sdk, nor the one supplied in the google android site.
Yes it can be done you need a zip file called android_usb_windows it has the drivers you need if that does not work then are you on vista?
thats the file I have, and I'm on XP pro
are you running xp x64 edition?
no, regular 32bit
Won't accept? does it install the driver or give an error? have you made sure its on a powered usb 2.0 port? people have problems with 1.2 and 1.0 usb ports.
also, does mass storage work? does it mount to your pc as a drive?
its a usb2.0 port on my vaio laptop...
what i mean was that windows won't install the driver for the phone when connected in dev mode (it finds new hardware, just won't accept the android driver..)
for mass storage, it does detect the android phone, it installed the driver fine, but won't mount it as a drive..
Hi, I want to got a windows tool works on ubuntu 9.10. It's used to communicate with the modem of my android phone. So I decided to use it via wine. But the tool just said it can't find usb port. What should I do? BTW, my android phone start up with two modes. When connector was plugged in, just the modem was power on, so it was detected to be a usb-serial device on windows. And if power on the phone, it was detected to be usb device on windows. Any ideas to support these two modes on ubuntu via wine?
Thanks a lot!
I am developing an android terminal application to communicate with USB-serial devices.
I have iberry BT07i running ICS 4.0.3 with 3.0.8 kernel. Build number is given as crane_evb-eng 4.0.3 IML74K 20120418.
My tablet is already rooted.
The tablet has usb otg port with host adapter and it powers the usb bus also.
When USB mass storage device is connected, it is detected and I am able to see the contents. Also when I connect USB serial devices like FTDI/prolific they are detected through USB Device Info application in linux mode. But when I came to know from the iberry support that host apis are not enabled in this tablet.
My app need to work in all devices with usb host api support without rooting. Is there a way to enable the host apis in my tablet through custom roms?
Hi to all,
I want to apologize for my english .
Is there any working gamepad (usb for pc) driver for usb host function developed here for HTC HD2.
I tried some find here: bitbank gamapad.cab file, but no success .
I have normal USB PC gamepad.
i have a usb to Ethernet adapter 10/100 which cabe with its CD. I hooked it up with my device but no luck. :crying:
could not see eth0 in terminal using netcfg .
after reading some posts about usb to Ethernet on xda , I rooted the phone, ran the makefile provided in the CD. still no luck.
So finally after reading for 2 days, I have options to
Install Ethernet drivers (don't know how)
Install kernel with Ethernet drivers (will change my phone config completely, maybe need to recalibrate later)
Flash a new ROM with Ethernet drivers (will need to reinstall everything)
Don't know the best option. Kinda stuck.
I don't want to loose the current config of cpu speed, etc. provided in the current Android
FYI: The device is detected on the device using usb host controller. Usb to Ethernet Model "Terabyte USB To Lan Card Ethernet Adapter Speed 10/100" found on Amazon. Manufacturer CH9100 Make CH9200. drivers provided has a "ch9x00.c" dunno what to do with it. (I mean after cross compiling).
attached the .c file for refrence.