Does Mate 9 USB C port support USB host OTG? Can i connect a USB flash drive to it?
Yes, it does. You can.
You also get a USB Typ C to MicroUSB Adapter from Huawei when you but the Mate 9.
Related
EDITED: I no longer need the OTG Commands... and they don't exist either.
I now have OTG adapters that work fully.
Anyone knows any method to set USB host mode (OTG mode) when not having a ID/Sense pin on the cable?
Be it with some sort of "echo 1 > /sys/something" command
Or a ADB command
Or a ready made app?
Or anything?
I did find this app, which seems to do this, but it is just stuck on my tablet.
https://play.google.com/store/apps/details?id=org.psypeople.OTG_patch&hl=en
The reason for this request is that I cannot find any of those "magnet cables" that connect all 5 pins. Always only 4.
And I want my car-tablet to be connected with a magnet cable.
Many thanks
have same problem, is there any way activate USB HOST mode on android 7.1.1 if no SENSE/ID PIN but hardware/kernel support USB OTG?
cybermaus said:
Anyone knows any method to set USB host mode (OTG mode) when not having a ID/Sense pin on the cable?
Be it with some sort of "echo 1 > /sys/something" command
Or a ADB command
Or a ready made app?
Or anything?
I did find this app, which seems to do this, but it is just stuck on my tablet.
https://play.google.com/store/apps/details?id=org.psypeople.OTG_patch&hl=en
The reason for this request is that I cannot find any of those "magnet cables" that connect all 5 pins. Always only 4.
And I want my car-tablet to be connected with a magnet cable.
Many thanks
Click to expand...
Click to collapse
Bumerangas said:
have same problem, is there any way activate USB HOST mode on android 7.1.1 if no SENSE/ID PIN but hardware/kernel support USB OTG?
Click to expand...
Click to collapse
If the device does not have the hardware to support OTG, it won't work no matter what you try.
If it has the hardware but does not have the software, it will require building a new kernel with OTG support implemented in the kernel, or if the device is rooted, you can try something like the Stickmount app to force enable OTG support(the app still requires the device to have the hardware to support OTG, otherwise, it won't work).
Sent from my SM-S767VL using Tapatalk
Hey all,
Long time no post.
I have an issue with my grandparents' Slate 21. The bootloader doesn't boot into OS. I'm no super tech nerd, but I have done Android reinstalls on Xiaomi Pocophone F1 and Samsung Galaxy S4 I-9505 with TWRP.
To install TWRP on the Slate 21, all you need is a male-to-male USB A cable and ADB.
My issue. I have downloaded many drivers (ADB&Fastboot, Google USB driver) and used methods such as
updating "Fastboot" driver software via device manager to a specific driver
manually installing drivers (Right-click -> Install)
switching USB ports
When I type in
Code:
fastboot oem unlock
or ANY
Code:
fastboot
command I always get
Code:
<waiting for any device>
. I have tried everything, so I came here as a last attempt. I will give any info you need because my grandpa needs this Slate.
Some info:
I installed ADB and Fastboot via the "15-second installer"
Fastboot loads correctly on the device itself
I cannot access Developer options because it doesn't load to OS
I use Windows 10
Love,
Nerijus
Simply installing drivers you don't know what they are meant for makes no sense at all, IMO:
Google's USB driver you installed is only applicable for Google devices ( e.g. Pixel, Nexus ).
You have to install the "Android USB Driver" suitable to mentioned phone.
BTW: To get the most accurate ADB & Fastboot drivers use my tool what is linked to in my signature.
jwoegerbauer said:
Simply installing drivers you don't know what they are meant for makes no sense at all, IMO:
Google's USB driver you installed is only applicable for Google devices ( e.g. Pixel, Nexus ).
You have to install the "Android USB Driver" suitable to mentioned phone.
BTW: To get the most accurate ADB & Fastboot drivers use my tool what is linked to in my signature.
Click to expand...
Click to collapse
The issue might be USB 3.0 ports.
emperoringo said:
The issue might be USB 3.0 ports.
Click to expand...
Click to collapse
If you say so ...
IMO your issue has nothing to do with of what type an USB port is.
The differences between USB 2.0 and USB 3.0 are
You can transfer data at up to 4.8 GBit/s with USB 3.0. That is ten times faster than with USB 2.0, which has a maximum of 480 MBit/s.
USB 3.0 works full-duplex. This means that data can be transferred in both directions. With USB 2.0, you can only transfer data in one direction at a time.
The maximum cable length with USB 3.0 is limited to 3 meters. USB 2.0 cables can be up to 5 meters long.
Never heard / read that ADB & Fastboot drivers depend on type of USB port.
jwoegerbauer said:
If you say so ...
IMO your issue has nothing to do with of what type an USB port is.
The differences between USB 2.0 and USB 3.0 are
You can transfer data at up to 4.8 GBit/s with USB 3.0. That is ten times faster than with USB 2.0, which has a maximum of 480 MBit/s.
USB 3.0 works full-duplex. This means that data can be transferred in both directions. With USB 2.0, you can only transfer data in one direction at a time.
The maximum cable length with USB 3.0 is limited to 3 meters. USB 2.0 cables can be up to 5 meters long.
Never heard / read that ADB & Fastboot drivers depend on type of USB port.
Click to expand...
Click to collapse
My laptop's USB 3.0 ports completely failed to unlock Xiaomi Pocophone F1's bootloader. Meanwhile, my old PC did it easily on the first try and it has USB 2.0 ports. Weird. Might be the reason.
I am trying to install custom firmware on b760h stb. I have already installed mtk preloader drivers. But when I connect STB with laptop through USB A male to USB A male, it doesn't work. is there any way to connect it to the laptop.
first, Cek... USB Cable, does it work?
Second, Check if the usb driver is correct ?
Conect usb male to male in to usb 1 in the stb without power adaptor.
I am facing the same problem. I have checked the USB Male to Male cable. It works. I also installed the USB drivers for Window10. I connected the USB cable in USB1 Port of STB without power adapter. But still it doesnt work.
Any Help ???
which is the code of the official samsung cable USB type C ?
I have lost the box with the manuals and i need a new cable
thnks