Custom firmware on zte zxv10 b760hs2 - General Questions and Answers

I am trying to install custom firmware on b760h stb. I have already installed mtk preloader drivers. But when I connect STB with laptop through USB A male to USB A male, it doesn't work. is there any way to connect it to the laptop.

first, Cek... USB Cable, does it work?
Second, Check if the usb driver is correct ?
Conect usb male to male in to usb 1 in the stb without power adaptor.

I am facing the same problem. I have checked the USB Male to Male cable. It works. I also installed the USB drivers for Window10. I connected the USB cable in USB1 Port of STB without power adapter. But still it doesnt work.
Any Help ???

Related

[Help] PC problem with cummucation between cell phone

Installed recently LG Phone software tool, but when I try to attach phone and update it with that tool, it shows message:
Problem with communication between cell phone and PC
Please disconnect the cable from your cell phone in order and remove and connect the battery.
Power on your cell phone and press the Restart button to resume update.
I also have all usb drivers installed + I can't see my sdcard via usb connect when I use "Turn on USB storage", is there any possibility to fix it?
Drivers installed when I plugged phone:
USB Composite Device
LGE AndroidNet USB Serial Port (COM7)
LGE AndroidNet NDIS Ethernet Adapter
LGE AndroidNet USB Modem
LGE AndroidNet USB GPS NMEA Port (COM8)
USB Mass Storage Device
LGE Cosmo USB Device
LGE CosmoExt USB Device
Install LG PC Suite 4! That fixed the same problem I had.
Sent from my LG-P920 using XDA App
that LG Suite 4 recognize my pc and I can sync calendar and stuff, but can sync video/photos, becouse when It does, it shows that I have to make sure mass storage is on, I have tested and it is on, but still it says that there is no Mass storage enabled :/ is it that my pc or phone is faulty? or maybe microsd? when I attack microsd itself alone to PC , it works like a charm
i have lg pc suite 4 and it tells me the problem with communication
any ideas??

[Q] need usb to ethernet drivers for Micromax A117

i have a usb to Ethernet adapter 10/100 which cabe with its CD. I hooked it up with my device but no luck. :crying:
could not see eth0 in terminal using netcfg .
after reading some posts about usb to Ethernet on xda , I rooted the phone, ran the makefile provided in the CD. still no luck.
So finally after reading for 2 days, I have options to
Install Ethernet drivers (don't know how)
Install kernel with Ethernet drivers (will change my phone config completely, maybe need to recalibrate later)
Flash a new ROM with Ethernet drivers (will need to reinstall everything)
Don't know the best option. Kinda stuck.
I don't want to loose the current config of cpu speed, etc. provided in the current Android
FYI: The device is detected on the device using usb host controller. Usb to Ethernet Model "Terabyte USB To Lan Card Ethernet Adapter Speed 10/100" found on Amazon. Manufacturer CH9100 Make CH9200. drivers provided has a "ch9x00.c" dunno what to do with it. (I mean after cross compiling).
attached the .c file for refrence.

Does Mate 9 USB port support host OTG?

Does Mate 9 USB C port support USB host OTG? Can i connect a USB flash drive to it?
Yes, it does. You can.
You also get a USB Typ C to MicroUSB Adapter from Huawei when you but the Mate 9.

Where to download J700F USB driver

need usb driver for accessing data on pc using usb cable.
If you have Windows 10, it should get them from the net automatically.
Otherwise, take a look here https://www.samsungusbdrivers.net/2016/12/samsung-galaxy-j7-usb-driver-for-windows.html

Asking for help. USB 3.0 Type A to Type A Male device from a Chinese Manufacturer

Hello xdadevelopers.
Android dev here. So here is my situation. I ordered an android device from a Chinese manufacturer. It only has USB 3.0 input. I am trying to compile and run my code on the device via a usb 3.0 Type A, male to Type A, male cable. After connecting the usb to my computer, it does not recognize my device. From here, I assumed it is because the manufactured device does not have a usb driver so am trying to install one onto the device. Is this correct to assume? Beyond this point, android documentation does not list the usb driver for my manufacturer because the manufacturer is not mainstream. Anyone have any insight as to how I can install a driver onto this alien device?

Categories

Resources