HI,
i've been wanting to root and install custom roms on the i9003. i finally got the courage to try to root and do all these things recently, so i rooted the phone using superoneclick.. but i didnt know what to do next, because i wanted to try out custom roms because of what i have been reading on the forums.
so i followed the instructions here: http://forum.xda-developers.com/showpost.php?p=19442301&postcount=1 and flashed the bagaria.tar found here using ODIN.
but it started looping and kept rebooting over and over again. and got stuck in bootloop. eventually it came up and would respond a bit before going back to the booting sequence, and i noticed that opening CWM automatically sent the phone to booting.
thinking that i did something wrong and afraid that i bricked the device i went to this thread and looked for the dxkp9 stock and used odin with it (http://forum.xda-developers.com/showthread.php?t=1004647)
it just is stuck on boot loop now.
i've tried removing the battery and trying holding the VOLup home and power to no avail.
its just stuck in boot loop.
It is currently stuck in boot loop and wont do anything. i am really hoping it can still be fixed.. a bit of a sentimental value since this was a phone given to me by my dad, and first smartphone as well..
i would be very grateful for any kind of help.
getlucky88 said:
HI,
i've been wanting to root and install custom roms on the i9003. i finally got the courage to try to root and do all these things recently, so i rooted the phone using superoneclick.. but i didnt know what to do next, because i wanted to try out custom roms because of what i have been reading on the forums.
so i followed the instructions here: http://forum.xda-developers.com/showpost.php?p=19442301&postcount=1 and flashed the bagaria.tar found here using ODIN.
but it started looping and kept rebooting over and over again. and got stuck in bootloop. eventually it came up and would respond a bit before going back to the booting sequence, and i noticed that opening CWM automatically sent the phone to booting.
thinking that i did something wrong and afraid that i bricked the device i went to this thread and looked for the dxkp9 stock and used odin with it (http://forum.xda-developers.com/showthread.php?t=1004647)
it just is stuck on boot loop now.
i've tried removing the battery and trying holding the VOLup home and power to no avail.
its just stuck in boot loop.
It is currently stuck in boot loop and wont do anything. i am really hoping it can still be fixed.. a bit of a sentimental value since this was a phone given to me by my dad, and first smartphone as well..
i would be very grateful for any kind of help.
Click to expand...
Click to collapse
1. download stock rom I9003XXKPE from here http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
Unzip and you will find the following files
1. Odin3v1.83(don't use this one, download latest version from here http://forum.xda-developers.com/showthread.php?t=1734997)
2.PIT file latona_20110114
3.BOOT LOADER-APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 file.
4.PDA-CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5.
5.PHONE-MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5.
6.CSC-GT-I9003-CSC-MULTI-OXAKPE.tar.md.
STEP 1
Go to download mode(press volume down+home then power),once in download mode, connect phone to computer -> double click odin3v1.83(make sure the bar under ID:COM turns yellow)
Double click "PIT" -> look for "latona_20110114" -> click "start", phone will turn off after finish(bar just above ID:COM turns green)
Take the battery out and return -> go to download mode again, connect phone to computer, double click Odin, make sure odin detects your phone, tick PDA, look for "CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5"
tick PHONE, look for "MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5"
tick CSC, look for "CSC-GT-I9003-CSC-MULTI-OXAKPE.tar.md"
Click "start", when it's done, you'll see a "PASS" on the odin, remove phone from computer, phone will restart automatically
Step 2 install value pack
Find and download a value pack of your choice from here http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
I used the stable I9003DDLF2 (2.3.6) after downloaded, unzip the files, you should have "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5"
Put your phone in download mode, connect to computer, start odin, tick PDA, search for I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5
Click "start", when it's done, you'll see a "PASS" on the odin, remove phone from computer, phone will restart automatically
Step3 apply root(I'm using XDA_Bam's)
Download "PDA_BCK_CF-root_universal_beta14fix.tar" from here http://forum.xda-developers.com/showthread.php?t=1355675
Again in download mode, connect to computer, start odin, tick PDA, search for "PDA_BCK_CF-root_universal_beta14fix.tar"
Click "start", when it's done, you'll see a "PASS" on the odin, remove phone from computer, phone will restart automatically
Step 4 apply custom roms(different roms have different requirements, read the instructions thoroughly)
download any custom rom of your choice, enter recovery mode(volume up + menu + power)
wipe data/factory reset, flash the rom zip(if google gapps is required->go to advanced -> Reboot Recovery -> Flash Google Apps -> reboot system
hard lesson learned
wee2wee said:
1. download stock rom I9003XXKPE from here http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
Unzip and you will find the following files
1. Odin3v1.83(don't use this one, download latest version from here http://forum.xda-developers.com/showthread.php?t=1734997)
2.PIT file latona_20110114
3.BOOT LOADER-APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 file.
4.PDA-CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5.
5.PHONE-MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5.
6.CSC-GT-I9003-CSC-MULTI-OXAKPE.tar.md.
STEP 1
Go to download mode(press volume down,+menu+power),once in download mode, connect phone to computer -> double click odin3v1.83(make sure the bar under ID:COM turns yellow)
Double click "PIT" -> look for "latona_20110114" -> click "start", phone will turn off after finish(bar just above ID:COM turns green)
Take the battery out and return -> go to download mode again, connect phone to computer, double click Odin, make sure odin detects your phone, tick PDA, look for "CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5"
tick PHONE, look for "MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5"
tick CSC, look for "CSC-GT-I9003-CSC-MULTI-OXAKPE.tar.md"
Click "start", when it's done, remove phone from computer, phone will restart automatically
Step 2 install value pack
Find and download a value pack of your choice from here http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
I used the stable I9003DDLF2 (2.3.6) after downloaded, unzip the files, you should have "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5"
Put your phone in download mode, connect to computer, start odin, tick PDA, search for I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5
Click "start", when it's done, remove phone from computer, phone will restart automatically
Step3 apply root(I'm using XDA_Bam's)
Download "PDA_BCK_CF-root_universal_beta14fix.tar" from here http://forum.xda-developers.com/showthread.php?t=1355675
Again in download mode, connect to computer, start odin, tick PDA, search for "PDA_BCK_CF-root_universal_beta14fix.tar"
Click "start", when it's done, remove phone from computer, phone will restart automatically
Step 4 apply custom roms(different roms have different requirements, read the instructions thoroughly)
download any custom rom of your choice, enter recovery mode(volume up + menu + power)
wipe data/factory reset, flash the rom zip(if google gapps is required->go to advanced -> Reboot Recovery -> Flash Google Apps -> reboot system
Click to expand...
Click to collapse
:good:
thanks a lot for helping out the newbies like myself.
t is working again and i used the superoneclick method to root my phone.
is there like a recommended "rom" sli9003 users can start with as far as trying things out that arent touchwiz?
i tried (http://forum.xda-developers.com/showthread.php?t=1894737) but i would appreciate it if someone can point me to the right direction. as i am looking forward to learn more
thanks a lot!
getlucky88 said:
:good:
thanks a lot for helping out the newbies like myself.
t is working again and i used the superoneclick method to root my phone.
is there like a recommended "rom" sli9003 users can start with as far as trying things out that arent touchwiz?
i tried (http://forum.xda-developers.com/showthread.php?t=1894737) but i would appreciate it if someone can point me to the right direction. as i am looking forward to learn more
thanks a lot!
Click to expand...
Click to collapse
Make sure you know what you are doing before trying anything....try this http://forum.xda-developers.com/showthread.php?t=1492113
wee2wee said:
1. download stock rom I9003XXKPE from here http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
Unzip and you will find the following files
1. Odin3v1.83(don't use this one, download latest version from here http://forum.xda-developers.com/showthread.php?t=1734997)
2.PIT file latona_20110114
3.BOOT LOADER-APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 file.
4.PDA-CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5.
5.PHONE-MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5.
6.CSC-GT-I9003-CSC-MULTI-OXAKPE.tar.md.
STEP 1
Go to download mode(press volume down,+menu+power),once in download mode, connect phone to computer -> double click odin3v1.83(make sure the bar under ID:COM turns yellow)
Double click "PIT" -> look for "latona_20110114" -> click "start", phone will turn off after finish(bar just above ID:COM turns green)
Take the battery out and return -> go to download mode again, connect phone to computer, double click Odin, make sure odin detects your phone, tick PDA, look for "CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5"
tick PHONE, look for "MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5"
tick CSC, look for "CSC-GT-I9003-CSC-MULTI-OXAKPE.tar.md"
Click "start", when it's done, remove phone from computer, phone will restart automatically
Step 2 install value pack
Find and download a value pack of your choice from here http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
I used the stable I9003DDLF2 (2.3.6) after downloaded, unzip the files, you should have "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5"
Put your phone in download mode, connect to computer, start odin, tick PDA, search for I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5
Click "start", when it's done, remove phone from computer, phone will restart automatically
Step3 apply root(I'm using XDA_Bam's)
Download "PDA_BCK_CF-root_universal_beta14fix.tar" from here http://forum.xda-developers.com/showthread.php?t=1355675
Again in download mode, connect to computer, start odin, tick PDA, search for "PDA_BCK_CF-root_universal_beta14fix.tar"
Click "start", when it's done, remove phone from computer, phone will restart automatically
Step 4 apply custom roms(different roms have different requirements, read the instructions thoroughly)
download any custom rom of your choice, enter recovery mode(volume up + menu + power)
wipe data/factory reset, flash the rom zip(if google gapps is required->go to advanced -> Reboot Recovery -> Flash Google Apps -> reboot system
Click to expand...
Click to collapse
Sir in my case everything goes well but after flashing with step 2 as mentioned above i get an error saying "E does not exist/ not possible" and the phone gets stuck in boot loop again where as after flashing the step 1 it was asking for password.
Pls help
rss31183
rss3183 said:
Sir in my case everything goes well but after flashing with step 2 as mentioned above i get an error saying "E does not exist/ not possible" and the phone gets stuck in boot loop again where as after flashing the step 1 it was asking for password.
Pls help
rss31183
Click to expand...
Click to collapse
After flashing step 1, did your phone restart/reboot normally?..what was asking for password? "everything goes well" for step1?
after flashing the files (pda modem etc.) the phone rebooted. but now is asking for a password go further. and when i tried to enter recovery and set it to factory settings it also asks for password before wiping the divice. tried a few times but with no success.
manu2002 said:
the password is maybe : samfirmware.com ............. maybe i saw it on http://forum.xda-developers.com/showthread.php?p=12310841#post12310841 below every rom
Click to expand...
Click to collapse
Greetings;
I didnt read all the stuff before...
So my answer may not be the best or accurate. (I'm almost out of time - sorry for that).
Either ways this happens to me when you don't perform a clean Flash (Formating Partitions before Flashing, wiping dalvik and cache) and after Flashing; performing a Factory Reset).
After the last step (Factory Reset) it should boot properly.
If not: Remove Battery, place it back and test if it boots.
From my experience: Downgrading ROM also do this issue. But i fix it by Flashing FULL DDLF2 (always with "clean flash") and then after my ROM Boots; Flashing the ROM i want to use.
Hope this helps.
When i flashed the first step my gt i9003 sl went completely blank except a bright light. Any solution or suggestiom
i search for link download ClockworkMod Recovery
For Devices GT-P5100
evry link download not working
link flash by odin
Here you go.
How to download:
google clockworkmod recovery gt-p5100 download
click the one which says galaxytabhacks
Scroll down and klick gt-p5100 one
Enjoy downloading
I've downloaded this from here and works perfect.
[ PREREQUISITE ]
Please have at least 50% battery
Make sure your laptop is charged (if you have a desktop, skip that.)
Instructions:
Boot into download mode (volume up + power.)
At the warning press volume down
Connect usb cable to computer
Open odin
Wait until the ID(COM0) thing turns yellow
Select that tar thing as PDA
Check PDA tickmark
Start flashing
CyanogenModFTW said:
How to download:
google clockworkmod recovery gt-p5100 download
click the one which says galaxytabhacks
Scroll down and klick gt-p5100 one
Enjoy downloading
I've downloaded this from here and works perfect.
[ PREREQUISITE ]
Please have at least 50% battery
Make sure your laptop is charged (if you have a desktop, skip that.)
Instructions:
Boot into download mode (volume up + power.)
At the warning press volume down
Connect usb cable to computer
Open odin
Wait until the ID(COM0) thing turns yellow
Select that tar thing as PDA
Check PDA tickmark
Start flashing
Click to expand...
Click to collapse
I wasn't able to keep cwm after initial boot..
If I try to boot into recovery after initial boot and boot loops....
Any suggestions?
Sent from my GT-P5113 using Tapatalk 4
sometimes ROM overwrites any other boot found as a security feature .. as you said .. the best thing you do is to flash CWM and boot into recovery before normal ROM boot .. good luck
Hello guys.
Im struggeling to install a custom ROM at the stage of installing a CWM recovery. My S2 plus 9105p runs Android 4.2.2 and everytime I try to upload a recovery img via Odin everything works fine as expected but when I try to start (volume up, home, power) the recovery mode - it gets always into the standard Android one - not CWM recovery!!! It looks like Samsung has integrated some kind of security mechanism which keeps us from running custom ROMs...
I have realy tried maybe 5 different recovery images, but non of those worked for me.
Can you please help?
THX
try flashing the files used in this guide
karamancho said:
try flashing the files used in this guide
Click to expand...
Click to collapse
I tried exactly also this particular site and steps described on it, but didn't help... The same problem. Everything was OK, but recovery was not CWM but standard Android one.
When u have flashed ur recorvery, take ur battery out and then plug battery again. And now go to recorvery.
Now it is WORKING !
Hi guys.
I followed the step-by-step guide on this page:
http://forum.xda-developers.com/showthread.php?t=2560928
- used the CWM 6.0.4.5 and Odin3 0.7
- after successfull flash of the PDA with this recovery (manualy unset the auto-reboot option) I have pulled the battery out for a couple of seconds
- the battery came back in again and with home-volUP-Power I got directly to the new CWM recovery.
So thanx all for your support and you can lock this thread as everything is working now.
DETAILED STEPS FOR INSTALLING CWM RECOVERY IF THE PHONE AUTOMATICALLY RE_FLASHES IT:
Installation
WITH ODIN
1. Be sure, that your device is on 4.2.2 stock firmware and shut down the phone
2. Be sure that Samsung drivers are installed on your pc. Just install Kies or google for them
3. Download Odin 3.07(google it) and the CWM-Recovery image (in this case CWM 6.0.4.5 )
4. Open Odin as administrator
5. Start-up the phone by pressing Vol_DOWN + Home + Power so you get into the flash-menu.
6. After reading the disclaimer and warning stuff - simply press Vol_UP and plug the USB cable to the PC and Phone
7. In ODIN click on PDA and select the downloaded CWM-recovery (*filename*.tar.md5) . Check - "F. Reset Time" and UNCHECK!! -> "Auto Reboot"
8. Click start and wait until the blue progress bar in your device is graphicaly 100% (I also suggest to wait another minute to make things sure..)
9. Pull out the battery
10. Pull out the uSB cable from PC and phone
11. Wait abou 10-15 seconds and power up your phone to get into the recovery menu by pressing: Vol_UP + Home + Power
12. DONE
Hello to every one!!
Today, I will ''learn'' you, how to restore your warranty on you Tab 3 T311
This guide is ''noob'' friendly
How to restore the warranty:
1. Download the latest firmware for the T311 ( Here: http://samsung-updates.com/device/?id=SM-T311 )
2. Download the Odin ( Here: https://drive.google.com/file/d/0BwWGbBx-jMwvcF9rQkVWdzMzWnM/edit?usp=sharing )
3. Un-zip the firmware
4. Open the odin
5. Select PDA
6. Then find the firmware
7. Turn off your T311
8. Press Volume down+Power button
9. Press the volume up to continue
10. Connect the t311 with the PC
11. Press Start on the Odin ( Make sure that Re-partition, Flash Lock, Led Control, Nand Erase all and T flash ARE UNCHECKED)
12. Wait 2-4 mins to boot
VOILA. You have a fresh new tab
If you're facing bootloop issues, please follow this
1. Press the volume up + Power button, until the tab 3 logo appears
2. With volume down, go to the wipe data
3. Press the Home button
4. Select the Yes with the home button (or the power button. It is the same)
5. Reboot the tab
Nice post, Thank's, :good::good::good::good::good:
This thread has left me baffled, please clarify
Could you please explain and prove how flashing the bare firmware reset your custom binary bit / Flash counter ?
how can this reset the flash counter / customer binary bit ?
Flash counter is usually located in boot-loader right ?
@t-shock,
Thanks for your most valuable guide.
I`ve restored My device (T311) . Now I`m using 4.4.2 stock.
Is there any way to downgrade form 4.4.2 to 4.2.2 ?
Sorry for noob question.
Hey, in this tutorial I'll tell you how to unbrick hard-bricked Tab 3.
So, if you have message that you must repair your Tab 3 in Samsung Kies, and you can't recover it (you have corrupted system and have no recovery), first thing that you must do is to download Odin here: http://odindownload.com/ and TWRP recovery (make sure that you downloaded the version for your tablet): version for model P5200 - https://goo.gl/mzY5kV and for model P5210 - https://goo.gl/mcxy3E. Then download stock ROM from sammobile.com. WARNING! Never flash ROM on the tablet in such a state. When you do this, you'll see FAILED message in Odin and you won't repair anything. Then you must turn off tablet and boot into download mode (hold power+volume down+home). Then connect your tablet to the computer and open Odin with administrator rights. Now you gonna to click AP button and locate and open twrp file (with .md5 extension) and when it is loaded click Start button. When recovery is flashed, plug off the cable and then you must turn off your tablet and boot into recovery mode (hold power+volume up+home). Now you must click Wipe>Advanced Wipe and mark everything (without USB-OTG and SD Card) and click button Wipe. After wiping, you must click Reboot and Download. You'll be in download mode and make sure that there isn't any text in the upper left corner. When there isn't anything then this means that you haven't anything on your tablet. Now you must open Odin again and plug the cable in. Then click AP button and locate and open your ROM. Now you must click Start and wait. When the ROM is flashed, the tablet should restart automatically. Then unplug the cable and wait for the tablet to boot. After few minutes, you should see the welcome message. When you see it, it means that tablet is working and the repair is completed.
I hope that this tutorial helped you
this is not hard bricked this is soft bricked. hard bricked is when you cannot turn on your device to enter the recover and download mode. i hope you do your research. please correct the title.