HI,
i've been wanting to root and install custom roms on the i9003. i finally got the courage to try to root and do all these things recently, so i rooted the phone using superoneclick.. but i didnt know what to do next, because i wanted to try out custom roms because of what i have been reading on the forums.
so i followed the instructions here: http://forum.xda-developers.com/showpost.php?p=19442301&postcount=1 and flashed the bagaria.tar found here using ODIN.
but it started looping and kept rebooting over and over again. and got stuck in bootloop. eventually it came up and would respond a bit before going back to the booting sequence, and i noticed that opening CWM automatically sent the phone to booting.
thinking that i did something wrong and afraid that i bricked the device i went to this thread and looked for the dxkp9 stock and used odin with it (http://forum.xda-developers.com/showthread.php?t=1004647)
it just is stuck on boot loop now.
i've tried removing the battery and trying holding the VOLup home and power to no avail.
its just stuck in boot loop.
It is currently stuck in boot loop and wont do anything. i am really hoping it can still be fixed.. a bit of a sentimental value since this was a phone given to me by my dad, and first smartphone as well..
i would be very grateful for any kind of help.
getlucky88 said:
HI,
i've been wanting to root and install custom roms on the i9003. i finally got the courage to try to root and do all these things recently, so i rooted the phone using superoneclick.. but i didnt know what to do next, because i wanted to try out custom roms because of what i have been reading on the forums.
so i followed the instructions here: http://forum.xda-developers.com/showpost.php?p=19442301&postcount=1 and flashed the bagaria.tar found here using ODIN.
but it started looping and kept rebooting over and over again. and got stuck in bootloop. eventually it came up and would respond a bit before going back to the booting sequence, and i noticed that opening CWM automatically sent the phone to booting.
thinking that i did something wrong and afraid that i bricked the device i went to this thread and looked for the dxkp9 stock and used odin with it (http://forum.xda-developers.com/showthread.php?t=1004647)
it just is stuck on boot loop now.
i've tried removing the battery and trying holding the VOLup home and power to no avail.
its just stuck in boot loop.
It is currently stuck in boot loop and wont do anything. i am really hoping it can still be fixed.. a bit of a sentimental value since this was a phone given to me by my dad, and first smartphone as well..
i would be very grateful for any kind of help.
Click to expand...
Click to collapse
1. download stock rom I9003XXKPE from here http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
Unzip and you will find the following files
1. Odin3v1.83(don't use this one, download latest version from here http://forum.xda-developers.com/showthread.php?t=1734997)
2.PIT file latona_20110114
3.BOOT LOADER-APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 file.
4.PDA-CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5.
5.PHONE-MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5.
6.CSC-GT-I9003-CSC-MULTI-OXAKPE.tar.md.
STEP 1
Go to download mode(press volume down+home then power),once in download mode, connect phone to computer -> double click odin3v1.83(make sure the bar under ID:COM turns yellow)
Double click "PIT" -> look for "latona_20110114" -> click "start", phone will turn off after finish(bar just above ID:COM turns green)
Take the battery out and return -> go to download mode again, connect phone to computer, double click Odin, make sure odin detects your phone, tick PDA, look for "CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5"
tick PHONE, look for "MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5"
tick CSC, look for "CSC-GT-I9003-CSC-MULTI-OXAKPE.tar.md"
Click "start", when it's done, you'll see a "PASS" on the odin, remove phone from computer, phone will restart automatically
Step 2 install value pack
Find and download a value pack of your choice from here http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
I used the stable I9003DDLF2 (2.3.6) after downloaded, unzip the files, you should have "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5"
Put your phone in download mode, connect to computer, start odin, tick PDA, search for I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5
Click "start", when it's done, you'll see a "PASS" on the odin, remove phone from computer, phone will restart automatically
Step3 apply root(I'm using XDA_Bam's)
Download "PDA_BCK_CF-root_universal_beta14fix.tar" from here http://forum.xda-developers.com/showthread.php?t=1355675
Again in download mode, connect to computer, start odin, tick PDA, search for "PDA_BCK_CF-root_universal_beta14fix.tar"
Click "start", when it's done, you'll see a "PASS" on the odin, remove phone from computer, phone will restart automatically
Step 4 apply custom roms(different roms have different requirements, read the instructions thoroughly)
download any custom rom of your choice, enter recovery mode(volume up + menu + power)
wipe data/factory reset, flash the rom zip(if google gapps is required->go to advanced -> Reboot Recovery -> Flash Google Apps -> reboot system
hard lesson learned
wee2wee said:
1. download stock rom I9003XXKPE from here http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
Unzip and you will find the following files
1. Odin3v1.83(don't use this one, download latest version from here http://forum.xda-developers.com/showthread.php?t=1734997)
2.PIT file latona_20110114
3.BOOT LOADER-APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 file.
4.PDA-CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5.
5.PHONE-MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5.
6.CSC-GT-I9003-CSC-MULTI-OXAKPE.tar.md.
STEP 1
Go to download mode(press volume down,+menu+power),once in download mode, connect phone to computer -> double click odin3v1.83(make sure the bar under ID:COM turns yellow)
Double click "PIT" -> look for "latona_20110114" -> click "start", phone will turn off after finish(bar just above ID:COM turns green)
Take the battery out and return -> go to download mode again, connect phone to computer, double click Odin, make sure odin detects your phone, tick PDA, look for "CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5"
tick PHONE, look for "MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5"
tick CSC, look for "CSC-GT-I9003-CSC-MULTI-OXAKPE.tar.md"
Click "start", when it's done, remove phone from computer, phone will restart automatically
Step 2 install value pack
Find and download a value pack of your choice from here http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
I used the stable I9003DDLF2 (2.3.6) after downloaded, unzip the files, you should have "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5"
Put your phone in download mode, connect to computer, start odin, tick PDA, search for I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5
Click "start", when it's done, remove phone from computer, phone will restart automatically
Step3 apply root(I'm using XDA_Bam's)
Download "PDA_BCK_CF-root_universal_beta14fix.tar" from here http://forum.xda-developers.com/showthread.php?t=1355675
Again in download mode, connect to computer, start odin, tick PDA, search for "PDA_BCK_CF-root_universal_beta14fix.tar"
Click "start", when it's done, remove phone from computer, phone will restart automatically
Step 4 apply custom roms(different roms have different requirements, read the instructions thoroughly)
download any custom rom of your choice, enter recovery mode(volume up + menu + power)
wipe data/factory reset, flash the rom zip(if google gapps is required->go to advanced -> Reboot Recovery -> Flash Google Apps -> reboot system
Click to expand...
Click to collapse
:good:
thanks a lot for helping out the newbies like myself.
t is working again and i used the superoneclick method to root my phone.
is there like a recommended "rom" sli9003 users can start with as far as trying things out that arent touchwiz?
i tried (http://forum.xda-developers.com/showthread.php?t=1894737) but i would appreciate it if someone can point me to the right direction. as i am looking forward to learn more
thanks a lot!
getlucky88 said:
:good:
thanks a lot for helping out the newbies like myself.
t is working again and i used the superoneclick method to root my phone.
is there like a recommended "rom" sli9003 users can start with as far as trying things out that arent touchwiz?
i tried (http://forum.xda-developers.com/showthread.php?t=1894737) but i would appreciate it if someone can point me to the right direction. as i am looking forward to learn more
thanks a lot!
Click to expand...
Click to collapse
Make sure you know what you are doing before trying anything....try this http://forum.xda-developers.com/showthread.php?t=1492113
wee2wee said:
1. download stock rom I9003XXKPE from here http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
Unzip and you will find the following files
1. Odin3v1.83(don't use this one, download latest version from here http://forum.xda-developers.com/showthread.php?t=1734997)
2.PIT file latona_20110114
3.BOOT LOADER-APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 file.
4.PDA-CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5.
5.PHONE-MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5.
6.CSC-GT-I9003-CSC-MULTI-OXAKPE.tar.md.
STEP 1
Go to download mode(press volume down,+menu+power),once in download mode, connect phone to computer -> double click odin3v1.83(make sure the bar under ID:COM turns yellow)
Double click "PIT" -> look for "latona_20110114" -> click "start", phone will turn off after finish(bar just above ID:COM turns green)
Take the battery out and return -> go to download mode again, connect phone to computer, double click Odin, make sure odin detects your phone, tick PDA, look for "CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5"
tick PHONE, look for "MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5"
tick CSC, look for "CSC-GT-I9003-CSC-MULTI-OXAKPE.tar.md"
Click "start", when it's done, remove phone from computer, phone will restart automatically
Step 2 install value pack
Find and download a value pack of your choice from here http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
I used the stable I9003DDLF2 (2.3.6) after downloaded, unzip the files, you should have "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5"
Put your phone in download mode, connect to computer, start odin, tick PDA, search for I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5
Click "start", when it's done, remove phone from computer, phone will restart automatically
Step3 apply root(I'm using XDA_Bam's)
Download "PDA_BCK_CF-root_universal_beta14fix.tar" from here http://forum.xda-developers.com/showthread.php?t=1355675
Again in download mode, connect to computer, start odin, tick PDA, search for "PDA_BCK_CF-root_universal_beta14fix.tar"
Click "start", when it's done, remove phone from computer, phone will restart automatically
Step 4 apply custom roms(different roms have different requirements, read the instructions thoroughly)
download any custom rom of your choice, enter recovery mode(volume up + menu + power)
wipe data/factory reset, flash the rom zip(if google gapps is required->go to advanced -> Reboot Recovery -> Flash Google Apps -> reboot system
Click to expand...
Click to collapse
Sir in my case everything goes well but after flashing with step 2 as mentioned above i get an error saying "E does not exist/ not possible" and the phone gets stuck in boot loop again where as after flashing the step 1 it was asking for password.
Pls help
rss31183
rss3183 said:
Sir in my case everything goes well but after flashing with step 2 as mentioned above i get an error saying "E does not exist/ not possible" and the phone gets stuck in boot loop again where as after flashing the step 1 it was asking for password.
Pls help
rss31183
Click to expand...
Click to collapse
After flashing step 1, did your phone restart/reboot normally?..what was asking for password? "everything goes well" for step1?
after flashing the files (pda modem etc.) the phone rebooted. but now is asking for a password go further. and when i tried to enter recovery and set it to factory settings it also asks for password before wiping the divice. tried a few times but with no success.
manu2002 said:
the password is maybe : samfirmware.com ............. maybe i saw it on http://forum.xda-developers.com/showthread.php?p=12310841#post12310841 below every rom
Click to expand...
Click to collapse
Greetings;
I didnt read all the stuff before...
So my answer may not be the best or accurate. (I'm almost out of time - sorry for that).
Either ways this happens to me when you don't perform a clean Flash (Formating Partitions before Flashing, wiping dalvik and cache) and after Flashing; performing a Factory Reset).
After the last step (Factory Reset) it should boot properly.
If not: Remove Battery, place it back and test if it boots.
From my experience: Downgrading ROM also do this issue. But i fix it by Flashing FULL DDLF2 (always with "clean flash") and then after my ROM Boots; Flashing the ROM i want to use.
Hope this helps.
When i flashed the first step my gt i9003 sl went completely blank except a bright light. Any solution or suggestiom
when i factory reset the tab and installed a rom. it started normally. i did everything normally and it showed google account manager has stopped.
so i tried going into CWM recovery mode but got me into stock recovery so factory reset the tablet and then tried wipe cache participation but shows error. I think that the problem is the cache and the dalvich. but i cant use usb debugging so i cant delete the cache and the dalvich.
:crying::crying::crying::crying::crying:
so does any body know how to fix this
thanks in advance :laugh:
Help cache partication error
yolo squad dodo said:
when i factory reset the tab and installed a rom. it started normally. i did everything normally and it showed google account manager has stopped.
so i tried going into CWM recovery mode but got me into stock recovery so factory reset the tablet and then tried wipe cache participation but shows error. I think that the problem is the cache and the dalvich. but i cant use usb debugging so i cant delete the cache and the dalvich.
:crying::crying::crying::crying::crying:
so does any body know how to fix this
thanks in advance :laugh:
Click to expand...
Click to collapse
Can anyone help me please!!!!!!!
yolo squad dodo said:
so i tried going into CWM recovery mode but got me into stock recovery
Click to expand...
Click to collapse
You are not reading what you are typing.
Obvious answer: If you end up in the STOCK RECOVERY you simply do not have a custom recovery installed (Clockworkmod as you wrote). Get yourself a copy of a recent recovery from AndroidAndi's download repository (TWRP, Clockworkmod Swipe, PhilZ Touch), and flash the .tar.md5 of the recovery with ODIN in download mode.
Obvious question: How did you flash a ROM, other than some OTA Stock Samsung update on the device itself, in the first place when you don't have a custom recovery installed in order to do so?
EDIT: What exactly do you mean by "factory reset"? Did you re-flash your tablet with a Stock ROM? If that's the case, then any custom recovery you had installed was wiped and replaced with the stock recovery. Hence why you now don't have a custom recovery anymore.
BoneWithABeagle said:
You are not reading what you are typing.
Obvious answer: If you end up in the STOCK RECOVERY you simply do not have a custom recovery installed (Clockworkmod as you wrote). Get yourself a copy of a recent recovery from AndroidAndi's download repository (TWRP, Clockworkmod Swipe, PhilZ Touch), and flash the .tar.md5 of the recovery with ODIN in download mode.
Obvious question: How did you flash a ROM, other than some OTA Stock Samsung update on the device itself, in the first place when you don't have a custom recovery installed in order to do so?
EDIT: What exactly do you mean by "factory reset"? Did you re-flash your tablet with a Stock ROM? If that's the case, then any custom recovery you had installed was wiped and replaced with the stock recovery. Hence why you now don't have a custom recovery anymore.
Click to expand...
Click to collapse
Odin won't recognise my tablet in Odin mode neither does my computer is there another to install a CWM recovery. By the the I do have back up on the phone if that helps.
By the way I am a noob
yolo squad dodo said:
Odin won't recognise my tablet in Odin mode neither does my computer is there another to install a CWM recovery. By the the I do have back up on the phone if that helps.
By the way I am a noob
Click to expand...
Click to collapse
Just to recap on the steps you should have done...
1. You downloaded the .tar.md5 of the recovery you want to install, from Android Andi's filehost, on your PC
2. You installed the Samsung USB drivers on your computer
3. You installed ODIN on your computer
4. You unplugged the tablet from the charger and powered it off
5. You took your tablet and HELD VOL-UP while you powered it back on (to get into bootloader mode)
6. You plugged the tablet in to the computer and waited for a moment while Windows was installing the driver
--- Here the story ends, according to what you wrote as you say ODIN does not find the tablet.
Well, are you sure you did the steps so far in that order? Can't be that ODIN doesn't detect the tablet when it's operational (read: no a total dead brick) and it's in download mode.
The ONLY problem possible: You installed Samsung KIES, and not just the USB drivers, on your computer. KIES interferes with ODIN. You need to exit ODIN, bring up the Task Manager (press CTRL+ALT+DELETE and select "Task Manager"), find "kies" and end the running process(es) - ignore any warning message.
If that's too complicated: Uninstall KIES and then find the "Samsung Mobile USB drivers" installation package ... with a bit of searching (just to assign some homework to you) you will the links right here in this forum section more than just once.
Once KIES is terminated, or uninstalled and just the USB drivers installed, start ODIN again ... now it should detect the tablet.
Once ODIN confirms that the tablet is detected...
7. Select the .tar.md5 of the recovery as the "PDA"
8. Flash the recovery. Once complete the tablet rebooted into the newly installed recovery.
As for on-device flashing. That's possible...
- Your installed ROM must be ROOTED (no root, no fun)
- You need Chainfire's "MobileODIN" (the free version from the Play Store would suffice), and you need to let MobileODIN install the "p311x flashkernel package" (I think with the free version you need to download it manually from Chainfire's thread and install it manually) - jump into Chainfire's thread and read on
Once you have Mobile ODIN installed it is just a matter of:
- Download the .tar.md5 of the recovery on your tablet once more (or transfer it over from your PC)
- Start Mobile ODIN
- Select the .tar.md5 of the recovery (should automatically be set as a "PDA")
- Flash and reboot into the recovery
However, as a fair warning ... as with every flashing of your device ... keep in mind something could go wrong (just to straighten it out that there's always room for user mistakes or murphy's law getting into the way ("Everything that can go wrong will go wrong"))
BoneWithABeagle said:
Just to recap on the steps you should have done...
1. You downloaded the .tar.md5 of the recovery you want to install, from Android Andi's filehost, on your PC
2. You installed the Samsung USB drivers on your computer
3. You installed ODIN on your computer
4. You unplugged the tablet from the charger and powered it off
5. You took your tablet and HELD VOL-UP while you powered it back on (to get into bootloader mode)
6. You plugged the tablet in to the computer and waited for a moment while Windows was installing the driver
--- Here the story ends, according to what you wrote as you say ODIN does not find the tablet.
Well, are you sure you did the steps so far in that order? Can't be that ODIN doesn't detect the tablet when it's operational (read: no a total dead brick) and it's in download mode.
The ONLY problem possible: You installed Samsung KIES, and not just the USB drivers, on your computer. KIES interferes with ODIN. You need to exit ODIN, bring up the Task Manager (press CTRL+ALT+DELETE and select "Task Manager"), find "kies" and end the running process(es) - ignore any warning message.
If that's too complicated: Uninstall KIES and then find the "Samsung Mobile USB drivers" installation package ... with a bit of searching (just to assign some homework to you) you will the links right here in this forum section more than just once.
Once KIES is terminated, or uninstalled and just the USB drivers installed, start ODIN again ... now it should detect the tablet.
Once ODIN confirms that the tablet is detected...
7. Select the .tar.md5 of the recovery as the "PDA"
8. Flash the recovery. Once complete the tablet rebooted into the newly installed recovery.
As for on-device flashing. That's possible...
- Your installed ROM must be ROOTED (no root, no fun)
- You need Chainfire's "MobileODIN" (the free version from the Play Store would suffice), and you need to let MobileODIN install the "p311x flashkernel package" (I think with the free version you need to download it manually from Chainfire's thread and install it manually) - jump into Chainfire's thread and read on
Once you have Mobile ODIN installed it is just a matter of:
- Download the .tar.md5 of the recovery on your tablet once more (or transfer it over from your PC)
- Start Mobile ODIN
- Select the .tar.md5 of the recovery (should automatically be set as a "PDA")
- Flash and reboot into the recovery
However, as a fair warning ... as with every flashing of your device ... keep in mind something could go wrong (just to straighten it out that there's always room for user mistakes or murphy's law getting into the way ("Everything that can go wrong will go wrong"))
Click to expand...
Click to collapse
odin recognize tablet and it got flash or what ever its called. it restarted but it didn't go into recovery but just restart as normal
I got it working by installing custom rom.
Thanks a lot by the way for the tips
yolo squad dodo said:
odin recognize tablet and it got flash or what ever its called. it restarted but it didn't go into recovery but just restart as normal
Click to expand...
Click to collapse
For future reference: keeping VOL DOWN UP held while powering on/rebooting the tablet takes you into the recovery in case you borked the system and selecting "Reboot" -> "Recovery" from within the _custom_ ROM's power menu is not an option (the Stock Samsung ROM does not have that option by default). Though keep in mind that this only works when the tablet is _NOT_ connected to the charger/computer ... when the USB cable is plugged in it seems to ignore the hardware keys.
yolo squad dodo said:
I got it working by installing custom rom.
Thanks a lot by the way for the tips
Click to expand...
Click to collapse
Great you got your recovery and custom ROM installed. Have fun.
BoneWithABeagle said:
For future reference: keeping VOL DOWN held while powering on/rebooting the tablet takes you into the recovery in case you borked the system and selecting "Reboot" -> "Recovery" from within the _custom_ ROM's power menu is not an option (the Stock Samsung ROM does not have that option by default). Though keep in mind that this only works when the tablet is _NOT_ connected to the charger/computer ... when the USB cable is plugged in it seems to ignore the hardware keys.
Great you got your recovery and custom ROM installed. Have fun.
Click to expand...
Click to collapse
Umm isn't recovery power and volume UP? At least that's how it is on my 7'' tablet and the 10'' I rooted and installed a ROM on.
jrc2
Sent from my T-Mobile S2 using Tapatalk
jrc2 said:
Umm isn't recovery power and volume UP? At least that's how it is on my 7'' tablet and the 10'' I rooted and installed a ROM on.
Click to expand...
Click to collapse
Now that you mention it... yes, you're right jrc... "VOL DOWN" == Download Mode / "VOL UP" == Recovery (I failed to recall the "UP as in update.zip" association).
My friend has a UNROOTED Galaxy Tab 2 10.1" and it's stuck on the Samsung screen (bootloop). I guided her towards recovery mode but it doesn't work. It doesn't boot to recovery mode but it does to download mode. How do I fix this?
There is one way to solve this.
Using odin[You need a pc for this]
follow the steps.
1.Install Odin in your PC from here
http://odindownload.com/download/Odin3_v3.10.6.zip
2.download the official firmware of your device from sammobiles .
http://www.sammobile.com/firmwares/
3.Go to download mode in your device (vol down+power button)
4.Now connect your device to the pc and open Odin.
5.Now open Odin in your PC and under PDA browse for the firmware you downloaded and click start.
6.Now wait till it says pass. After that detach your device and wait till it boots.
This reboot may take like 5-15 mins. Incase it doesn't boot up even 30mins just try going to recovery and perform a factory reset.
THATS IT.YOU HAVE SOLVED YOUR PROBLEM.
HIT THANKS IF THIS HELPED YOU!!!!
:good:
I've tried to root my phone using this procedure:
How to root Samsung Note 4 SM-N910T and after I used Obi3 to load CF-Auto-Root.tar file, phone went to this page:
RECOVERY BOOTING.....
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
Click to expand...
Click to collapse
And whatever I do it boots only in this page now...
Is it any way to recover from this?
Thank you in advance!
This is very serious problem. Phone starts only with the screen mentioned in my first post. There is no Android Recovery available (if I press VolumeUP+Power+Home it goes to the same screen only). I can only go to Download mode and try to update it with CF-Auto-Root.tar file. But it doesn't help. Phone boots only into one screen only and there is no way to bypass it now.
Please help!
Do not ever use the procedure from the site, mentioned in my first post! It's full of BS (to go to Download mode you have to press VolumeDOWN+Home+Power and not VolumeUP+Home+Power) and the file provided there will soft-brick your phone with endless loop as I've described above
Here is the proper procedure to root SM-N910T phone:
1. Download and install Samsung USB driver Samsung-Usb-Driver-v1.5.63.0
2. Download and extract CF-Auto-Root-trltetmo-trltetmo-smn910t.tar.md5 file. See list of all devices - CF-Auto-Root
3. Turn off phone and boot into Download mode. Press VolumeDWN+Home+Power buttons
4. In Download mode if you see warning yellow triangle, then press VoumelUP to continue
5. Run (as admin) Odin3 and connect phone to computer
6. Once device is detected, click on AP button and select CF-Auto-Root-trltetmo-trltetmo-smn910t.tar.md5 file
7. Wait for couple minutes until rooting is completed and you see PASS! becoming green on top
Now you phone will boot normally and will set its root